Walter Friesenbichler

(Former)

1 - 290 out of 290Page size: 500

Research output

  1. 2025
  2. Published

    Upcycling of regenerates and injection molding through a new technological approach

    Shahroodi, Z., Zidar, D., Krempl, N., Friesenbichler, W. & Holzer, C., 24 Jan 2025, PPI 2024 : International Conference on Polymer Process Innovation, Proceedings. p. 219-223 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. 2024
  4. Published

    An Investigation on The Effects of Post-industrial Glass Fiber Flakes on the Properties of Recycled Polypropylene

    Raguz, I., Shahroodi, Z., Krempl, N., Arbeiter, F., Friesenbichler, W. & Holzer, C., 23 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  5. 2023
  6. Published

    Wear phenomenon in injection molding

    Zidar, D., Friesenbichler, W. & Blutmager, A., 23 May 2023, In: AIP Conference Proceedings. 2607.2023, 1, 6 p., 040003.

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2022
  8. Published

    Wanted: Höchste Qualität bei der Spritzgießsimulation

    Friesenbichler, W., 1 Oct 2022, In: KC-aktuell (Informationen aus dem Kunstoff-Cluster). 2022, 3, p. 14-15 2 p.

    Research output: Contribution to journal › Article › Research

  9. E-pub ahead of print

    Hardness Loss of Plastic Mold Steels: Phenomenon in Injection Molding

    Zidar, D., Landefeld, A., Gschöpf, B., Schnitzer, R., Zunko, H. & Friesenbichler, W., 28 Sept 2022, (E-pub ahead of print) In: Steel research international. 2022, 11, 7 p., 2200326.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Hardness Loss of Plastic Mold Steels: Phenomenon in Injection Molding

    Zidar, D., Landefeld, A., Gschöpf, B., Schnitzer, R., Zunko, H. & Friesenbichler, W., 28 Sept 2022, In: Steel research international. 94.2022, 4, 7 p., 2200326.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    LightCycle: Upcycling of regenerates and injection moulding into high quality light weight components using a new technological approach

    Krempl, N. & Friesenbichler, W., 15 Sept 2022.

    Research output: Contribution to conference › Poster › Research

  12. 2021
  13. Published

    On the Influence of Viscoelastic Modeling in Fluid Flow Simulations of Gum Acrylonitrile Butadiene Rubber

    Stieger, S., Mitsoulis, E., Walluch, M., Ebner, C., Roman Christopher, K., Haselmann, M., Mostafaiyan, M., Kämpfe, M., Kühnert, I., Wießner, S. & Friesenbichler, W., 15 Jul 2021, In: Polymers. 13.2021, 14, 18 p., 2323.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Viscoelastic Modelling and Fluid Flow Simulations of Acrylonitrile Butadiene Rubber

    Stieger, S., Mitsoulis, E., Roman Christopher, K. & Friesenbichler, W., 28 Jun 2021.

    Research output: Contribution to conference › Abstract › peer-review

  15. Published

    Application of organosilane coatings for improved anti-adhesive properties enabling facilitated demolding in polymer processing

    Bandl, C., Krempl, N., Berger-Weber, G., Kern, W. & Friesenbichler, W., 10 Mar 2021, In: Journal of Applied Polymer Science. 138.2021, 30, 9 p., 50714.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Temperature Profile in Rubber Injection Molding: Application of a Recently Developed Testing Method to Improve the Process Simulation and Calculation of Curing Kinetics

    Traintinger, M., Roman Christopher, K., Lechner, B., Friesenbichler, W. & Lucyshyn, T., 26 Jan 2021, In: Polymers. 13.2021, 3, p. 1-12 12 p., 380.

    Research output: Contribution to journal › Article › Research › peer-review

  17. 2020
  18. Published

    Rubber injection molding: Applying multivariate statistics to identify quality issues solely from process signals

    Hutterer, T., Berger-Weber, G., Kerschbaumer, R. C. & Friesenbichler, W., 15 Dec 2020, In: Polymer Engineering and Science. 61.2021, 4, p. 983-992 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Causes of the Gloss Transition Defect on High-Gloss Injection-Molded Surfaces

    Gim, J., Han, E., Rhee, B., Friesenbichler, W. & Gruber, D. P., 15 Sept 2020, In: Polymers. 12.2020, 9, 16 p., 2100.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Die Kunst der Entformung: Eine neu entwickelte Hybridbeschichtung reduziert die Entformungskraft im Spritzgießwerkzeug

    Krempl, N., Jilg, J., Schilp, C., Friesenbichler, W. & Moritzer, E., 2020, In: Kunststoffe. 2020, 2, p. 60 - 63 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. 2019
  22. Published

    Simple and rapid method for restoring anti-adhesive organosilane coatings on metal substrates

    Bandl, C., Kern, W., Krempl, N. & Friesenbichler, W., 20 Dec 2019, In: Progress in organic coatings. 140.2020, March, 105490.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Flow Visualization of Rubber Compounds

    Mitsoulis, E., Stieger, S., Roman Christopher, K. & Friesenbichler, W., 18 Nov 2019.

    Research output: Contribution to conference › Abstract › peer-review

  24. Published

    Contraction and Capillary Flow of a Carbon Black Filled Rubber Compound

    Stieger, S., Kerschbaumer, R. C., Mitsoulis, E., Fasching, M., Berger-Weber, G., Friesenbichler, W. & Sunder, J., 23 Oct 2019, In: Polymer engineering and science. 60.2020, 1, p. 32-43 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Processing Fiber-Reinforced Polymers: Specific Wear Phenomena Caused by Filler Materials

    Blutmager, A., Spahn, T., Varga, M., Friesenbichler, W., Riedl, H. & Mayrhofer, P. H., 18 Oct 2019, In: Polymer engineering and science. 60.2020, 1, p. 78-85 8 p.

    Research output: Contribution to journal › Article › Research

  26. Published

    Rheology and Capillary Flow Behavior of an HNBR Rubber Compound

    Mitsoulis, E., Stieger, S., Roman Christopher, K., Neunhäuserer, A. & Friesenbichler, W., 27 May 2019.

    Research output: Contribution to conference › Abstract › peer-review

  27. Published

    Influence of dissipation on abrasive wear of a powder metallurgical mold steel in plastics injection molding

    Friesenbichler, W., Zidar, D., Blutmager, A. & Gebauer, T., 16 May 2019, Proceedings of the 11th Tooling Conference & Exhibition. 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Flow Visualization of Rubber Compounds in Molding

    Stieger, S., Kerschbaumer, R. C., Mitsoulis, E., Fasching, M., Berger-Weber, G. & Friesenbichler, W., 14 May 2019, Conference book ERIF 2019. p. 42-57

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  29. Published

    Viscoelasticity and Processing of Rubber in Injection Molding with Cold Runner

    Friesenbichler, W., Stieger, S., Traintinger, M., Wolf, A. & Mitsoulis, E., 14 May 2019, Conference book ERIF 2019. p. 1-21

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  30. Published

    Viskoelastische Charakterisierung, Modellierung und Strömungssimulation hochgefüllter Kautschukmischungen

    Stieger, S., Roman Christopher, K., Berger-Weber, G. & Friesenbichler, W., 25 Apr 2019, 28. Leobener Kunststoff-Kolloquium: Simulation in der Kunststofftechnik. Leoben: Eigenverlag, Vol. 09. p. 78-88 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Efficient cooling of hot spots in injection molding. A biomimetic cooling channel versus a heat‐conductive mold material and a heat conductive plastics

    Berger-Weber, G., Zorn, D., Friesenbichler, W., Bevc, F. & Bodor, C. J., 9 Mar 2019, In: Polymer engineering and science. 59.2019, s2, p. E180-E188 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Thermal Degradation Kinetics of Polypropylene/Clay Nanocomposites Prepared by Injection Molding Compounder

    Kannan Vimalathithan, P., Barile, C., Casavola, C., Arunachalam, S., Battisti, M., Friesenbichler, W. & Vijayakumar, C. T., 1 Jan 2019, In: Polymer Composites. 2019, p. 1-10 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Fault detection in rubber injection molding with multivariate statistics

    Hutterer, T., Berger-Weber, G. & Friesenbichler, W., 2019, In: Rubber world. 2019, December, p. 40-44 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. 2018
  35. Published

    Abrasive/Erosive Wear on MMCs in Plastic Molds as a Function of Volumetric Flow Rates and Glass Fiber Distribution

    Blutmager, A., Varga, M., Schmidt, T., Pock, A. & Friesenbichler, W., 22 Nov 2018, In: Polymer engineering and science. 59.2019, S1, p. E302-E311 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Capillary Flow Behavior of a Rubber Compound

    Mitsoulis, E., Neunhäuserer, A., Stieger, S. & Friesenbichler, W., 7 Nov 2018.

    Research output: Contribution to conference › Abstract › peer-review

  37. Published

    Viscoelastic Material Characterization and Modelling of Industrial Rubber Compounds - K-BKZ Model

    Stieger, S., Kerschbaumer, R. C., Haselmann, M., Berger-Weber, G., Fasching, M., Duretek, I., Schuschnigg, S. & Friesenbichler, W., 7 Nov 2018.

    Research output: Contribution to conference › Abstract › peer-review

  38. Published

    Beschichtungen für Formen und Werkzeuge in der Kunststoff verarbeitenden Industrie

    Krempl, N., Kern, W., Bandl, C., Friesenbichler, W. & Gröger, T., Oct 2018, 2 p. 4020 Linz

    Research output: Other contribution › Research

  39. Published

    Determination of the temperature after dosing an industrial rubber compound. A new ultrasonic-based method

    Hutterer, T., Praher, B., Berger-Weber, G. & Friesenbichler, W., 5 Jul 2018. 1 p.

    Research output: Contribution to conference › Poster › Research

  40. Published

    A study on the Influence of Material Characterization Methods and Models on Rubber Injection Molding Simulation

    Stieger, S., Berger-Weber, G., Friesenbichler, W. & Fasching, M., 3 Jul 2018.

    Research output: Contribution to conference › Abstract › peer-review

  41. Published

    Flow behavior of PP‐polymer nanocomposites in injection molding hyperbolical dies

    Mitsoulis, E., Battisti, M., Neunhäuserer, A., Perko, L. & Friesenbichler, W., 24 Apr 2018, In: Advances in Polymer Technology. 37.2018, 8, p. 3045-3055 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Beschichtungen für Formen und Werkzeuge in der Kunststoff verarbeitenden Industrie

    Krempl, N., Bandl, C., Gröger, T., Kern, W., Friesenbichler, W. & Berger-Weber, G., 20 Apr 2018. 1 p.

    Research output: Contribution to conference › Poster › Research

  43. Published

    Advanced Part Quality Testing – Compression Set vs. Non-Destructive and Fast Measurement Device JIDOKA S101 II

    Kerschbaumer, R., Lechner, B. & Friesenbichler, W., 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    A Model to Describe the Transient Temperature Build Up During Dosing of a Rubber Injection Molding Machine

    Kerschbaumer, R. & Friesenbichler, W., 2018.

    Research output: Contribution to conference › Paper › peer-review

  45. Published

    Beschichtungen für Formen und Werkzeuge in der kunststoffverarbeitenden Industrie

    Krempl, N., Bandl, C., Gröger, T., Kern, W. & Friesenbichler, W., 2018, 27. Leobener Kunststoffkolloquium.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Beschichtung mit beschränkter Haftung

    Krempl, N., Bandl, C., Gröger, T., Kern, W. & Friesenbichler, W., 2018, In: Chemiereport.at : Austrian life sciences ; Österreichs Magazin für Chemie, Life Sciences & Materialwissenschaften. p. 49 52 p., 8.

    Research output: Contribution to journal › Article › Research

  47. Published

    Determination of the temperature of an industrial rubber compound after dosing. A new ultrasound based method

    Hutterer, T., Praher, B., Berger-Weber, G. & Friesenbichler, W., 2018.

    Research output: Contribution to conference › Paper › peer-review

  48. Published

    Online detection of storage-induced changes of rubber properties in the injection molding process

    Hutterer, T., Fasching, M. A., Berger-Weber, G. & Friesenbichler, W., 2018.

    Research output: Contribution to conference › Paper › peer-review

  49. 2017
  50. Published

    A study on cooling performance in injection molding. Heat conductive mold materials versus conformal cooling channels. Proceedings Europe Africa Conference 2017 of the POLYMER PROCESSING SOCIETY (PPS)

    Berger, G., Friesenbichler, W., Zorn, D. & Bevc, F., 22 Jun 2017

    Research output: Non-textual form › Digital or Visual Products › Research

  51. Published

    Viscosity Measurements for Rubber Compounds using Slit-die Rheometry: Proceedings Europe Africa Conference 2017 of the POLYMER PROCESSING SOCIETY (PPS)

    Friesenbichler, W. & Neunhäuserer, A., 22 Jun 2017

    Research output: Non-textual form › Digital or Visual Products › Research

  52. Published

    Kühlperformance beim Spritzgießen von Kunststoffen. Verleich einer konturnahen und einer blutgefäßartigen Werkzeugkühlung mit einem Formeinsatz höherer Wärmeleitfähigkeit

    Berger, G., Panzl, G., Zorn, D., Bevc, F. & Friesenbichler, W., Jun 2017, Rapid.Tech – International Trade Show & Conference for Additive Manufacturing : Proceedings of the 14th Rapid.Tech Conference Erfurt, Germany, 20 – 22 June 2017. Kynast, M., Eichmann, M. & Witt, G. (eds.). p. 123-139

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik

    Friesenbichler, W. & Berger, G., Apr 2017, Leoben: Eigenverlag. 275 p.

    Research output: Book/Report › Anthology › Research

  54. Published

    ADVANCES IN INJECTION MOLDING COMPOUNDING ON CARBON FOORPRINT IN THE PRODUCTION OF POLYMER NANOCOMPOSITES

    Neunhäuserer, A., Arunachalam, S. & Friesenbichler, W., Apr 2017

    Research output: Non-textual form › Digital or Visual Products › Research

  55. Published

    Das Kautschukspritzgießen - Maschinen-, Prozess- und Werkzeugtechnik

    Friesenbichler, W. & Kerschbaumer, R., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 107-128 22 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Das Kautschukspritzgießen - Maschinen-, Prozess- und Werkzeugtechnik

    Friesenbichler, W. & Kerschbaumer, R., Apr 2017, p. 107-128. 22 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  57. Published

    Die Physik der Oberfläche – Oberflächeneigenschaften und Haptik

    Friesenbichler, W., Gruber, D. P. & Haselmann, M., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 165-175 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Herausforderungen und Grenzen des Kautschukspritzgießens

    Fasching, M., Friesenbichler, W. & Berger, G., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 129-136 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Moffatt-Eddies: Existing in Rubber Processing?

    Kerschbaumer, R., Lechner, B. & Friesenbichler, W., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 257-258 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Strömungs- und Temperaturverhältnisse in der Kautschuk-Plastifiziereinheit

    Kerschbaumer, R., Lechner, B., Graninger, G. & Friesenbichler, W., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 155-164 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    THE IMPORTANCE OF VISCOELASTICITY AND PRESSURE DEPENDENCE OF VISCOSITY FOR SIMULATION OF MELT FLOW IN INJECTION MOLDING AND CAPILLARY RHEOMETRY

    Friesenbichler, W., Neunhäuserer, A., Fasching, M. A. & Mitsoulis, E., Apr 2017

    Research output: Non-textual form › Digital or Visual Products › Research

  62. Published

    Verbesserung der Wärmeleitfähigkeit von HDPE durch Einsatz mikro- und nanoskaliger Füllstoffe

    Stieger, S., Berger, G., Battisti, M. & Friesenbichler, W., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 247-248 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Flow behaviour of rubber in capillary and injection moulding dies

    Mitsoulis, E., Battisti, M., Neunhäuserer, A., Perko, L., Friesenbichler, W., Ansari, M. & Hatzikiriakos, S. G., 5 Mar 2017, In: Plastics, rubber and composites. 46.2017, 3, p. 110-118 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Determination of Thermal Conductivity of an Industrial Rubber Compound: Challenges, Problems and Comparison of Different Test Methods

    Kerschbaumer, R., Lechner, B., Tscharnutter, D., Wanner, A. J. & Friesenbichler, W., 2017, Conference Proceedings of the RubberCon.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Flow Behavior of PP-Polymer Nanocomposites in Capillary and Injection Molding Dies

    Mitsoulis, E., Battisti, M., Neunhäuserer, A., Perko, L. & Friesenbichler, W., 2017, In: International polymer processing. 32.2017, 2, p. 217-226 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. 2016
  67. Published

    Visualization of the Inlet Flow Behavior for Different Rubber Compounds using various Die Geometries

    Kerschbaumer, R., Perko, L., Lechner, B. & Friesenbichler, W., 28 Oct 2016, p. 1-2. 2 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  68. Published

    A First Approach to Visualize the Flow Behavior in the Screw Channel for a CSM-Rubber Compound

    Kerschbaumer, R., Lechner, B., Graninger, G., Haselmann, M. & Friesenbichler, W., Oct 2016, p. 1-2. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  69. Published

    A First Approach to Visualize the Flow Behavior in the Screw Channel for a CSM-Rubber Compound

    Kerschbaumer, R., Lechner, B., Graninger, G., Haselmann, M. & Friesenbichler, W., Oct 2016, p. 1-2. 2 p.

    Research output: Contribution to conference › Poster › Research › peer-review

  70. Published

    Visualization of the Inlet Flow Behavior for Different Rubber Compounds using various Die Geometries

    Kerschbaumer, R., Perko, L., Lechner, B. & Friesenbichler, W., Oct 2016, p. 1-2. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  71. Published

    On the Use of Bionic Cooling Structures in Injection Molding

    Berger, G., Zorn, D., Bodor, C., Friesenbichler, W. & Bevc, F., 22 Sept 2016, p. 155-161. 7 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  72. Published

    On the Use of Bionic Cooling Structures in Injection Molding

    Berger, G., Zorn, D., Bodor, C., Friesenbichler, W. & Bevc, F., 22 Sept 2016, p. 155-161. 7 p.

    Research output: Contribution to conference › Paper › peer-review

  73. Published

    On the Use of Bionic Cooling Structures in Injection Molding

    Berger, G., Zorn, D., Bodor, C., Friesenbichler, W. & Bevc, F., 22 Sept 2016, Conference Proceedings: 7th bi-annual International Conference of Polymers & Moulds Innovations. Gent, p. 155-161 7 p. 21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Simulation of Rubber Injection Molding - Challenges and Limitations

    Friesenbichler, W., Berger, G. & Fasching, M., 22 Sept 2016, p. 179-183. 4 p.

    Research output: Contribution to conference › Paper › peer-review

  75. Published

    Simulation of Rubber Injection Molding - Challenges and Limitations

    Friesenbichler, W., Berger, G. & Fasching, M., 22 Sept 2016, p. 179-183. 4 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  76. Published

    Simulation of Rubber Injection Molding - Challenges and Limitations

    Friesenbichler, W., Berger, G. & Fasching, M., 22 Sept 2016, Conference Proceedings: 7th bi-annual International Conference of Polymer & Moulds Innovations. Gent, p. 179-183 4 p. 34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Using elongational flow to enhance the properties of polypropylene nanocomposites

    Arunachalam, S., Battisti, M., Perko, L., Stieger, S. & Friesenbichler, W., 4 Aug 2016, In: SPE Plastics Research Online / Society of Plastic Engineers. 2016, 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    A New Device for Measuring Shear Viscosity of Rubbers on a Rubber Injection Molding Machine

    Fasching, M., Friesenbichler, W., Leitner, E. & Berger, G., Jul 2016, p. 1-5. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  79. Published

    Characterization of the Temperature Profile during Dosing of Different Rubber Compounds under Steady State Conditions by Means of a Specially Designed Screw Test Stand

    Kerschbaumer, R., Lechner, B., Graninger, G. & Friesenbichler, W., Jul 2016, p. 1-5. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  80. Published

    Influence of Processing Conditions and Filler Type and on the Crystallinity of PLA Compounds

    Pacher, G., Hutterer, T., Berger, G. & Friesenbichler, W., Jul 2016, p. 1-5. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  81. Published

    Development for Manufacturing Practice - Example Leoben

    Friesenbichler, W., 23 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  82. Published

    Rheometry of Polymer Melt using Processing Machines

    Friesenbichler, W., Neunhäuserer, A. & Duretek, I., 19 May 2016, p. 2-5. 4 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  83. E-pub ahead of print

    A novel online rheometer for elongational viscosity measurement of polymer melts

    Köpplmayr, T., Luger, H.-J., Burzic, I., Battisti, M., Perko, L., Friesenbichler, W. & Miethlinger, J., 23 Jan 2016, (E-pub ahead of print) In: Polymer Testing. 50.2016, April, p. 208-215 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    A study on the role of wetting parameters on friction in injection moulding

    Berger, G. R., Steffel, C. & Friesenbichler, W., 2016, In: International Journal of Materials and Product Technology. 52, 1-2, p. 193-211 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Determination of a robust process for a union nut. Why d-optimal DoE did not solve random impact behavior?

    Steffel, C., Berger, G. & Friesenbichler, W., 2016, In: AIP Conference Proceedings. 1779

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Influence of elongational flow generating nozzles on material properties of polypropylene nanocomposites. Part I

    Battisti, M., Perko, L., Arunachalam, S., Stieger, S. & Friesenbichler, W., 2016, In: Polymer engineering and science. p. n/a-n/a

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Optimization of twin screw extrusion using CFD for polymer/nanoclay composites

    Schuschnigg, S., Battisti, M., Winkler-Ebner, J., Friesenbichler, W. & Holzer, C., 2016, In: AIP Conference Proceedings.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Rheometry of polymer melts using processing machines

    Friesenbichler, W., Neunhäuserer, A. & Duretek, I., 2016, In: Korea-Australia Rheology Journal. 28, 3, p. 167-174 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Rheometry of Polymer Melt using Processing Machines

    Friesenbichler, W., Neunhäuserer, A. & Duretek, I., 2016, The 16th Internaional Symposium on Applied Rheology (ISAR). Korea, p. 2-5 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Vorrichtung und Verfahren zum Faserspritzgießen von Spritzgießteilen

    Petschnig, A. (Inventor), Rojach, M. (Inventor), Friesenbichler, W. (Inventor), Bodor, C. (Inventor), Bevc, F. (Inventor), Berger, G. (Inventor) & Schadler, W. (Inventor), 2016, 3 Dec 2015, Priority No. WO2015181296A1

    Research output: Patent

  91. 2015
  92. Published

    Methoden zur Bestimmung des Vernetzungsgrads an Kautschukformteilen

    Friesenbichler, W. & Fasching, M., 5 Nov 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  93. Published

    Methoden zur Bestimmung des Vernetzungsgrads an Kautschukformteilen

    Friesenbichler, W. & Fasching, M., 5 Nov 2015, Proceedings Rubber meets Science. 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Potentiale der Schlitzdüsenrheometrie für die rheologische Charakterisierung von Kunststoffschmelzen und -compounds

    Friesenbichler, W., Nov 2015, 24. Leobener Kunststoff-Kolloquium: Festkolloquium Kunststoffverarbeitung GRL 75. Leoben, Vol. 24. p. 37-56

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  95. Published

    An Investigation of Mechanical and Thermal Properties of Polypropylene Clay Nanocomposites Containing Different Nanoclays

    Arunachalam, S., Battisti, M. G., Vijayakumar, C. T. & Friesenbichler, W., 1 Oct 2015, In: Macromolecular materials and engineering. 300, 10, p. 966-976 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    A Study on Material Optimization for Polypropylene Nanocomposites Based On Layered Silicates Using Elongational Flow Devices

    Neunhäuserer, A., Friesenbichler, W. & Battisti, M., 23 Sept 2015, p. 28. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  97. Published

    A Study On Optimization Of Mechanical Properties for Polypropylene Nanocomposites Based On Layered Silicates Using Extensional Flow Inducing Multinozzle Systems

    Neunhäuserer, A., Battisti, M. & Friesenbichler, W., 23 Sept 2015, p. 26. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  98. Published

    Optimization of Twin Screw Extrusion using CFD for Polymer/Nanoclay Composites: Polymer Processing Society Regional Conference Graz 2015 Book of Abstracts

    Schuschnigg, S., Battisti, M., Winkler-Ebner, J., Friesenbichler, W. & Holzer, C., 21 Sept 2015, p. 182.

    Research output: Contribution to conference › Abstract

  99. Published

    Regional Conference Polymer Processing Society - Book of Abstracts

    Friesenbichler, W., Sept 2015, Eigenverlag. 336 p.

    Research output: Book/Report › Anthology › Research

  100. Published

    Potential for Cure Time Reduction in Rubber Injection Molding and its Analytical Prediction

    Friesenbichler, W., Perko, L. & Fasching, M., 2 Jul 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  101. Published

    Cartucho explosivo

    Moser, P. (Inventor), Bauer, F. (Inventor), Friesenbichler, W. (Inventor), Fertschej, A. (Inventor) & Schatzer, R. (Inventor), 25 Jun 2015, IPC No. F42D 1/ 10 A I, Patent No. ES2538987T, Priority date 25 Mar 2011, Priority No. WO2011EP54635

    Research output: Patent

  102. Published

    A Study on Material Optimization for Polypropylene Nanocomposites Based On Layered Silicates Using Elongational Flow Devices

    Friesenbichler, W., Battisti, M. & Neunhäuserer, A., 11 Jun 2015. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  103. Published

    A Study on Material Optimization for Polypropylene Nanocomposites Based On Layered Silicates Using Elongational Flow Devices

    Friesenbichler, W., Battisti, M. & Neunhäuserer, A., 11 Jun 2015, Proceedings of the PPS-31. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    Slit-die Rheometry and its Potential in Polymer Melt Rheology

    Friesenbichler, W., Perko, L. & Fasching, M., 11 Jun 2015. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  105. Published

    Slit-die Rheometry and its Potential in Polymer Melt Rheology

    Friesenbichler, W., Perko, L. & Fasching, M., 11 Jun 2015, Proceedings of the PPS-31. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  106. Published

    Potential for Cure Time Reduction in Rubber Injection Molding and its Analytical Prediction

    Friesenbichler, W. & Perko, L., 9 Jun 2015. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  107. Published

    Potential for Cure Time Reduction in Rubber Injection Molding and its Analytical Prediction

    Friesenbichler, W. & Perko, L., 9 Jun 2015, Proceedings of the PPS-31. 1 p. S12-226

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  108. Published

    Verkürzung der Vulkanisationszeit bei der Elastomerverarbeitung

    Perko, L. & Friesenbichler, W., 1 Jun 2015, In: GAK : Gummi, Fasern, Kunststoffe. 68, 6, p. 431-435 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  109. Published

    Potential for Cure Time Reduction in Rubber Injection Molding and its Analytical Prediction

    Friesenbichler, W., Perko, L. & Fasching, M., Jun 2015, Proceedings of the IRC and DKT 2015; ME E T ING POINT OF THE RUB B E R INDUS T R Y.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  110. Published

    Virtual Modelling of the Rubber Injection Molding Process including Verification in Industrial Scale Experiments

    Fasching, M., Friesenbichler, W. & Berger, G., Jun 2015, Proceedings of the IRC and DKT 2015; ME E T ING POINT OF THE RUB B E R INDUS T R Y.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  111. Published

    Short-term and long-term behavior of PP-polymer nanocomposites produced by injection molding compounding

    Battisti, M. G., Guttmann, P., Chitu, L. & Friesenbichler, W., 22 May 2015, Proceedings of PPS-30: The 30th International Conference of the Polymer Processing Society - Conference Papers. Vol. 1664. 700041

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  112. Published

    Improving the mechanical behavior of polypropylene nanocomposites

    Battisti, M., Arunachalam, S. & Friesenbichler, W., May 2015, In: SPE Plastics Research Online / Society of Plastic Engineers. 10.2417, 005891, p. 1-3

    Research output: Contribution to journal › Article › Research › peer-review

  113. Published

    Reduction of cure time in elastomer processing

    Perko, L. & Friesenbichler, W., May 2015, In: Rubber, fibres, plastics international. Issue 02/2015, p. 117-121 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  114. Published

    Correlation between Rheotens measurements and reinforcement of polymer nanocomposites in the injection molding compounder

    Battisti, M. G., Friesenbichler, W., Duretek, I. & Guttmann, P., 15 Apr 2015, In: Journal of physics / Conference series. 602, 1, 012012.

    Research output: Contribution to journal › Article › Research › peer-review

  115. Published

    IMPROVEMENT OF MECHANICAL BEHAVIOR OF POLYPROPYLENE NANOCOMPOSITES VARYING NANOCLAYS AND COMPATIBILIZERS(Nanocomposites II)

    Battisti, M., Arunachalam, S. & Friesenbichler, W., 24 Mar 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  116. Published

    PräzisionsteileIntegrativ entwickelte Präzisionsteile

    Friesenbichler, W., Jan 2015.

    Research output: Contribution to conference › Presentation › Research

  117. Published

    Advanced Mold Concepts to Improve Part Quality and Productivity in Rubber Injection Molding

    Fasching, M., Friesenbichler, W., Pacher, G. & Berger, G., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 49 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  118. Published

    A Study on Material Optimization for Polypropylene Nanocomposites Based On Layered Silicates Using Elongational Flow Devices

    Friesenbichler, W., Battisti, M. & Neunhäuserer, A., 2015, Polymer Processing Society Graz 2015 - Book of Abstracts. p. 28 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  119. Published

    A Study On Optimization Of Mechanical Properties for Polypropylene Nanocomposites Based On Layered Silicates Using Extensional Flow Inducing Multinozzle Systems

    Neunhäuserer, A., Battisti, M. & Friesenbichler, W., 2015, Polymer Processing Society Graz 2015 - Book of Abstracts. p. 26 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  120. Published

    Change of Processing Behavior of Rubbers in Injection Molding caused by Material Storage

    Fasching, M., Friesenbichler, W. & Berger, G., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 103 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  121. Published

    Determination of a robust process for a union nut. Why doptimal DoE did not solve random impact behavior?

    Steffel, C., Berger, G. & Friesenbichler, W., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 52 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  122. Published

    Determination of a robust process for a union nut. Why doptimal DoE did not solve random impact behavior?

    Steffel, C., Berger, G. & Friesenbichler, W., 2015, p. 52. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  123. Published

    First integrated human like machine vision system for the surface inspection of curved injection molded parts

    Gruber, D., Altenbuchner, T., Macher, J. & Friesenbichler, W., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 48 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  124. Published

    Improvement of mechanical behavior of polypropylene nanocomposites varying nanoclays and compatibilizers

    Battisti, M. G., Sundaresan, A., Guttmann, P. & Friesenbichler, W., 2015, ANTEC 2015 - Proceedings of the Annual Technical Conference and Exhibition of the Society of Plastics Engineers. p. 532-536 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  125. Published

    IMPROVEMENT OF MECHANICAL BEHAVIOR OF POLYPROPYLENE NANOCOMPOSITES VARYING NANOCLAYS AND COMPATIBILIZERS(Nanocomposites II)

    Battisti, M., Arunachalam, S. & Friesenbichler, W., 2015, Proceedings of the ANTEC 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  126. Published

    Influence of Rapid Heat Cycle Molding and Filler Type on Part Warpage of PP-based compounds

    Pacher, G., Berger, G., Gruber, D. & Friesenbichler, W., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 50 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  127. Published

    Inline Detection of Material Storage Effects on Processing Behavior of Rubber Compounds

    Fasching, M., Berger, G. & Friesenbichler, W., 2015, Proceedings of the ANTEC 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  128. Published

    Material modelling of PPA-CF30 with fiber data from μCT and injection moulding simulation

    Bodor, C., Tscharnuter, D. & Friesenbichler, W., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 152 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  129. Published

    On the Use of Interfacial Tension Parameter to Predict Reduction of Friction by Mold Coatings in Injection Molding of Polyamide 6

    Berger, G., Steffel, C. & Friesenbichler, W., 2015, p. 51. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  130. Published

    On the Use of Interfacial Tension Parameter to Predict Reduction of Friction by Mold Coatings in Injection Molding of Polyamide 6

    Berger, G., Steffel, C. & Friesenbichler, W., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 51 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  131. Published

    Robust process control for rubber injection moulding with use of systematic simulations and improved material data

    Fasching, M., Berger, G., Friesenbichler, W., Filz, P. & Helbich, B., 2015, In: International Polymer Science and Technology. 42, 3, p. T1-T3

    Research output: Contribution to journal › Article › Research › peer-review

  132. Published

    Simulation Aided Twin Screw Optimization for Polymer Nanoclay Composites

    Schuschnigg, S., Battisti, M., Joachim, W.-E., Friesenbichler, W. & Holzer, C., 2015, Danube Vltava Sava Polymer Meeting-DVSPM 2015 : Proceedings of a Conference on Polymer Science. Linz, p. 88 O13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  133. Published

    Visualization of Flow Patterns and Dead Volume in Rubber Processing by Means of Capillary Rheometry with various Die Geometries

    Kerschbaumer, R., Lechner, B., Perko, L. & Friesenbichler, W., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 78 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  134. 2014
  135. Published

    Robuste Prozessführung beim Kautschukspritzgießen unter Nutzung systematischer Simulation und verbesserter Materialdaten

    Fasching, M., Berger, G., Friesenbichler, W., Filz, P. & Helbich, B., Oct 2014, In: GAK : Gummi, Fasern, Kunststoffe. 10/2014, p. 640-644 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  136. Published

    ВЗРЫВНОЙ ПАТРОН

    Bauer, F. (Inventor), Moser, P. (Inventor), Friesenbichler, W. (Inventor), Schatzer, R. (Inventor) & Fertschej, A. (Inventor), 27 Apr 2014, IPC No. F42B 3/ 087 A I, Patent No. RU2012145175, Priority date 25 Mar 2011, Priority No. WO2011EP54635

    Research output: Patent

  137. Published

    Einsatz der Simulation in der systematischen Bauteilentwicklung

    Berger, G. & Friesenbichler, W., 27 Feb 2014, p. 1-38. 38 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  138. Published

    A Novel Sink Mark Model for High Gloss Injection Molded Parts - Correlation of Deflectometric and Topographic Measurements

    Macher, J., Gruber, D. P., Altenbuchner, T., Pacher, G., Berger, G. & Friesenbichler, W., 2014, In: Polymer Testing. 39, p. 12-19

    Research output: Contribution to journal › Article › Research › peer-review

  139. Published

    Chapter 12: Injection Molding Compounding of Polymer Nanocomposites

    Battisti, M. & Friesenbichler, W., 2014, New Developments in Polymer Composites Research. p. 301-324

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  140. Published

    Detection of Visually Perceptible Sink Marks on High Gloss Injection Molded Parts by Phase Measuring Deflectometry

    Macher, J., Gruber, D. P., Altenbuchner, T., Pacher, G., Berger, G. & Friesenbichler, W., 2014, In: Polymer Testing. p. 42-48

    Research output: Contribution to journal › Article › Research › peer-review

  141. Published

    Determination of a Robust Process Setting for an Injection Molded Mirror Drive Component Using D-Optimal DoE

    Berger, G., Friesenbichler, W., Luger, H.-J., Gierth, M., Beytollahi, I. & Filz, P., 2014, 30th International Conference of the Polymer Processing Scociety: DIGITAL BOOK OF ABSTRACTS AND CONFERENCE PAPERS. p. 10-390

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  142. Published

    Elongational flow generating devices for the improvement of mechanical properties of PP-PNCs

    Friesenbichler, W., Battisti, M., Chitu, L. & Feuchter, M., 2014, 6th International PMI Conference Proceedings. p. 139-143

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  143. Published

    Evaluation of Rubber Injection Molding Simulation by Correlation of Simulated Curing Degree to Measureable Part Properties

    Fasching, M., Friesenbichler, W. & Berger, G., 2014, 30th International Conference of the Polymer Processing Scociety: DIGITAL BOOK OF ABSTRACTS AND CONFERENCE PAPERS. p. 11-349

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  144. Published

    Hochqualitative Bauteiloberflächen im Spritzguss – Möglichkeiten und Grenzen der Prozessführung

    Friesenbichler, W. & Berger, G., 2014, Tagungsband: Spritzgießen & Veredeln; Produktion funktioneller, hochwertiger Oberflächen. Deutschland: Carl Hanser Verlag GmbH & Co. KG

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  145. Published

    Influence of mold surface temperature on polymer part warpage in rapid heat cycle molding

    Berger, G. R., Pacher, G. A., Pichler, A., Friesenbichler, W. & Gruber, D. P., 2014, Proceedings of PPS 2013 - 29th International Conference of the Polymer Processing Society, Conference Papers. Vol. 1593. p. 189-194 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  146. Published

    Influence of Thermal Conductivity of PP-Based Compounds on Surface Roughness of Rapid Heat Cycle Injection Molded Parts

    Pacher, G., Geissler, B., Macher, J., Berger, G., Gruber, D. P. & Friesenbichler, W., 2014, 30th International Conference of the Polymer Processing Scociety: DIGITAL BOOK OF ABSTRACTS AND CONFERENCE PAPERS. p. 10-136

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  147. Published

    In-mold sensor concept to calculate process-specific rheological properties

    Pacher, G. A., Berger, G. R., Friesenbichler, W., Gruber, D. P. & Macher, J., 2014, In: AIP Conference Proceedings. 1593, p. 179-182

    Research output: Contribution to journal › Article › Research › peer-review

  148. Published

    Measurement of the visual perceptibility of sink marks on injection molding parts by a new fast processing model

    Gruber, D. P., Macher, J., Haba, D., Berger, G., Pacher, G. & Friesenbichler, W., 2014, In: Polymer Testing. 33, p. 7-12

    Research output: Contribution to journal › Article › Research › peer-review

  149. Published

    Model for the Prediction of Bulk Temperature Changes and Pressure Losses in Rubber Compounds Flowing Through Conical Dies: An Engineering Approach: Wiley Online Library - Polymer Engineering & Science

    Perko, L., Fasching, M. & Friesenbichler, W., 2014

    Research output: Non-textual form › Web publication/site › Transfer

  150. Published

    Model for the Prediction of Bulk Temperature Rises and Pressure Losses in Conical Dies for Rubber Compounds – an Engineering Approach

    Perko, L., Fasching, M. & Friesenbichler, W., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  151. Published

    Model for the Prediction of Bulk Temperature Rises and Pressure Losses in Conical Dies for Rubber Compounds – an Engineering Approach

    Perko, L., Fasching, M. & Friesenbichler, W., 2014, 30th International Conference of the Polymer Processing Scociety: DIGITAL BOOK OF ABSTRACTS AND CONFERENCE PAPERS. p. 04-129

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  152. Published

    PP-Polymer Nanocomposites with Improved Mechanical Properties Using Elongational Flow Devices at the Injection Molding Compounder

    Battisti, M. G. & Friesenbichler, W., 2014, In: AIP Conference Proceedings. 1593, p. 195-198

    Research output: Contribution to journal › Article › Research › peer-review

  153. Published

    Prediction of friction in injection molding by wetting parameters?

    Berger, G., Friesenbichler, W., Steffel, C. & Pacher, G., 2014, 6th International PMI Conference Proceedings. p. 61-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  154. Published

    Rapid Heat Cycle Molding, Surface Topography and Visual Appearance of Injection Molded Parts. Research Work in Leoben in the Last 10 Years.

    Berger, G., Friesenbichler, W., Gruber, D. P., Pacher, G. & Macher, J., 2014, ANTEC® 2014 - Proceedings of the Technical Conference & Exhibition. Brown, H. L. & Jones, D. H. (eds.). p. 1700-1705

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  155. Published

    Shear and Extensional Viscosity Measurement for Rubber Compounds by Means of High Pressure Capillary Rheometry

    Friesenbichler, W., Fasching, M. & Perko, L., 2014, 30th International Conference of the Polymer Processing Scociety: DIGITAL BOOK OF ABSTRACTS AND CONFERENCE PAPERS. p. 16-285

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  156. Published

    Short-term and Long-term Behavior of PP-Polymer Nanocomposites Produced by Injection Molding Compounding

    Battisti, M., Guttmann, P., Chitu, L. & Friesenbichler, W., 2014, 30th International Conference of the Polymer Processing Society. p. 649-649

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  157. Published

    Sink mark shape dependin on holdin pressure and rapid heat c clemoldin -mathematical approimation and KE parameters

    Pacher, G. A., Gruber, D. P., Rescher, M., Berger, G. R. & Friesenbichler, W., 2014, 72nd Annual Technical Conference of the Society of Plastics Engineers, ANTEC 2014: The Plastics Conference. January ed. Vol. 2. p. 1716-1720 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  158. 2013
  159. Published

    EXPLOSIVE CARTRIDGE

    Moser, P. (Inventor), Bauer, F. F. (Inventor), Friesenbichler, W. (Inventor), Fertschej, A. (Inventor) & Schatzer, R. (Inventor), 27 Nov 2013, IPC No. F42D C I, Patent No. ZA201206754, Priority date 25 Mar 2011, Priority No. WO2011EP54635

    Research output: Patent

  160. Published

    Injection-moulding compounding of PP polymer nanocomposites

    Battisti, M. G. & Friesenbichler, W., 25 Nov 2013, In: Strojniski vestnik = Journal of mechanical engineering. 59, 11, p. 662-668 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  161. Published

    SPRENGPATRONE

    Moser, P. (Inventor), Bauer, F. (Inventor), Friesenbichler, W. (Inventor), Fertschej, A. (Inventor) & Schatzer, R. (Inventor), 30 Jan 2013, IPC No. F42D 1/ 10 A I, Patent No. EP2550502, Priority date 25 Mar 2011, Priority No. WO2011EP54635

    Research output: Patent

  162. Published

    A novel method for the characterization of surface defects remarkably close to the human perception

    Gruber, D. P., Pacher, G., Macher, J., Berger, G. & Friesenbichler, W., 2013, 29th International Conference of the Polymer Processing Society. p. 48-48

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  163. Published

    AN OVERVIEW ON RESEARCH WORK IN LEOBEN IN THE FIELDS OF RAPID HEAT CYCLE MOLDING, SURFACE TOPOGRAPHY AND VISUAL APPEARANCE OF INJECTION MOLDED PARTS

    Pacher, G., Berger, G., Gruber, D. P. & Friesenbichler, W., 2013, ADVANCES IN PLASTICS TECHNOLOGY - Conference Papers. p. Paper No. 27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  164. Published

    Application and Development of Simulation Software in Polymer Processing

    Lucyshyn, T., Müller, F., Schuschnigg, S., Holzer, C., Perko, L., Fasching, M. & Friesenbichler, W., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 200-205

    Research output: Contribution to journal › Article › Research › peer-review

  165. Published

    Application of deflectometry for surface inspection of high-­‐glossy injection-­‐molded facing parts

    Macher, J., Gruber, D. P., Berger, G. & Friesenbichler, W., 2013, THE PROCEEDINGS OF THE AUSTRIAN – SLOVENIAN POLYMER MEETING 2013: ASPM 2013. Ljubljana, p. 93-95

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  166. Published

    Application of D-­optimal design of experiments on process optimization of an automotive part

    Berger, G., Luger, H.-J., Friesenbichler, W., Beytollahi, I., Gierth, M. & Filz, P., 2013, THE PROCEEDINGS OF THE AUSTRIAN – SLOVENIAN POLYMER MEETING 2013. p. 106-108

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  167. Published

    Ausnutzung der Scher- und Dehnerwärmung zur Heizzeitverkürzung; bei der Verarbeitung von Elastomeren

    Perko, L., Friesenbichler, W. & Fasching, M., 2013, In: Österreichische Kunststoff-Zeitschrift. p. 252-254

    Research output: Contribution to journal › Article › Research › peer-review

  168. Published

    Ausnutzung der Scher- und Dehnerwärmung zur Heizzeitverkürzung; bei der Verarbeitung von Elastomeren

    Perko, L., Friesenbichler, W. & Fasching, M., 2013, In: GAK : Gummi, Fasern, Kunststoffe. 66, p. 622-624

    Research output: Contribution to journal › Article › Research › peer-review

  169. Published

    Correlation between Rheotens Measurements and Reinforcement of Polymer Nanocomposites in the Injection Molding Compounder

    Battisti, M., Duretek, I., Friesenbichler, W., Guttmann, P. & Pinter, G., 2013, 1st International Conference on Rheology and Modelling of Materials - Book of Abstracts. p. 39-39

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  170. Published

    Deformation Analysis of an Automotive Part by Injection Molding Simulation: Influence of Material Data and Mold Modeling on Prediction Quality

    Luger, H.-J., Berger, G., Müller, F., Friesenbichler, W., Beytollahi, I. & Filz, P., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  171. Published

    Deformation Analysis of an Automotive Part by Injection Molding Simulation: Influence of Material Data and Mold Modelling on Prediction Quality

    Luger, H.-J., Berger, G., Müller, F., Friesenbichler, W., Beytollahi, I. & Filz, P., 2013, 29th International Conference of the Polymer Processing Society. p. 59-59

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  172. Published

    Die Wirkung dynamischer Werkzeugtemperierung auf die Oberflächenqualität von Kunststoffteilen

    Pacher, G., Berger, G., Friesenbichler, W. & Gruber, D. P., 2013, 22. Leobener Kunststoff-Kolloquium: Oberlfächen und Grenzflächen in der Polymertechnologie. p. 101-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  173. Published

    Elongational viscosity of rubber compounds and improving corresponding models

    Perko, L., Friesenbichler, W., Obendrauf, W., Buchebner, V. & Chaloupka, G., 2013, In: Advances in production engineering & management. 8, p. 126-133

    Research output: Contribution to journal › Article › Research › peer-review

  174. Published

    Influence of material condition on processing of rubber compounds and its representation in simulation

    Fasching, M., Friesenbichler, W. & Berger, G., 2013, THE PROCEEDINGS OF THE AUSTRIAN – SLOVENIAN POLYMER MEETING 2013. p. 75-77

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  175. Published

    Influence of Mold Surface Temperature on Polymer Part Warpage in Rapid Heat Cycle Molding

    Berger, G., Pacher, G., Gruber, D. P., Pichler, A. & Friesenbichler, W., 2013, 29th International Conference of the Polymer Processing Society. p. 49-49

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  176. Published

    INFLUENCE OF PROCESS SETTINGS ON THE TOPOGRAPHY OF SINK MARKS

    Pacher, G., Berger, G., Gruber, D. P. & Friesenbichler, W., 2013, ADVANCES IN PLASTICS TECHNOLOGY - Conference Papers. Gliwice, Polen, p. Paper No. 31

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  177. Published

    In-Mold Sensor Concept to calculate process-specific Rheological Properties

    Pacher, G., Berger, G., Friesenbichler, W., Gruber, D. P. & Macher, J., 2013, 29th International Conference of the Polymer Processing Society. p. 48-48

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  178. Published

    Kosten reduzieren durch systematische Entwicklungsprozesse

    Friesenbichler, W., Gröger, T., Vetschera, R. & Hopmann, C., 2013, In: Kunststoffe. p. 50-53

    Research output: Contribution to journal › Article › Research › peer-review

  179. Published

    Model for the prediction of elegational heating rubber compounds in conical dies

    Perko, L., Fasching, M. & Friesenbichler, W., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  180. Published

    Model for the prediction of elegational heating rubber compounds in conical dies

    Perko, L., Fasching, M. & Friesenbichler, W., 2013, THE PROCEEDINGS OF THE AUSTRIAN – SLOVENIAN POLYMER MEETING 2013. p. 258-259

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  181. Published

    MODEL FOR THE PREDICTION OF SHEAR AND ELONGATIONAL HEATING OF RUBBER COMPOUNDS IN CONICAL DIES

    Perko, L., Fasching, M. & Friesenbichler, W., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  182. Published

    More Gloss, Fewer Weld Lines With Variothermal Molding

    Berger, G., Roock, S., Steinbichler, G., Gießauf, J., Gruber, D. P. & Friesenbichler, W., 2013, In: Plastics technology. 59, 3, p. 30, 60-35, 62

    Research output: Contribution to journal › Article › Research › peer-review

  183. Published

    MULTI-FUNCTIONAL INJECTION MOLD FOR EXAMINING THE INFLUENCE OF RAPID HEAT CYCLE MOLDING ON POLYMER MORPHOLOGY

    Pacher, G., Berger, G. & Friesenbichler, W., 2013, Tagungsband der 3. Tagung Innovation Messtechnik. p. 25-30

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  184. Published

    NEW METHODS FOR QUALITY CONTROL OF INJECTION-MOLDED PARTS

    Macher, J., Gruber, D. P., Berger, G. & Friesenbichler, W., 2013, ANTEC 2013 Conference and Tradeshow. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  185. Published

    New ways for the characterization of appearance properties of plastic products and components close to human vision

    Gruber, D. P., Berger, G. & Friesenbichler, W., 2013, THE PROCEEDINGS OF THE AUSTRIAN – SLOVENIAN POLYMER MEETING 2013. Ljubljana, p. 11-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  186. Published

    PP-Polymer Nanocomposites with improved mechanical properties using elongational flow generating devices at the Injection Molding Compounder

    Friesenbichler, W. & Battisti, M., 2013, PPS-29: 29th International Conference of the Polymer Processing Society Nuremberg, Germany ; 15 - 19 July 2013 ; book abstracts. Altstädt, V. (ed.). Melville, NY, p. 50-50

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  187. Published

    PP-Polymer Nanocomposites with improved mechanical properties using elongational flow generating devices at the Injection Molding Compounder

    Battisti, M. & Friesenbichler, W., 2013, AIP Conference Proceedings 1593. Melville, NY

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  188. Published

    Reducing Costs through Systematic Development Processes

    Friesenbichler, W., Gröger, T., Vetschera, R. & Hopmann, C., 2013, In: Kunststoffe <München> / Kunststoffe international. 103, p. 35-38

    Research output: Contribution to journal › Article › Research › peer-review

  189. Published

    Reibwerte und Entformungskräfte im konventionellen Spritzguss. Vorhersage durch Grenzflächenspannung?

    Berger, G., Friesenbichler, W., Teichert, C., Langecker, G. & Lugger, M., 2013, 22. Leobener Kunststoff-Kolloquium: Oberlfächen und Grenzflächen in der Polymertechnologie. p. 75-89

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  190. Published

    Simulating the Fatigue Life of Fiber-Reinforced Injection Moldings

    Guster, C., Friesenbichler, W., Gröger, T., Mösenbacher, A. & Brunbauer, J., 2013, In: Kunststoffe <München> / Kunststoffe international. p. 92-94

    Research output: Contribution to journal › Article › Research › peer-review

  191. Published

    Simulation der Lebensdauer faserverstärkter Spritzgussteile

    Guster, C., Friesenbichler, W., Gröger, T., Mösenbacher, A. & Brunbauer, J., 2013, In: Kunststoffe. p. 158-161

    Research output: Contribution to journal › Article › Research › peer-review

  192. Published

    Systematic Virtual Optimization of the Rubber Injection Moulding Process Including Practical Verification

    Fasching, M., Berger, G., Friesenbichler, W. & Gierth, M., 2013, 29th International Conference of the Polymer Processing Society. p. 181-182

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  193. Published

    Variotherm Injection Molding Process with BFMold Technology and Electric Heating: Simulation and Experimental Validation

    Pichler, A., Rus, P., Kukla, C., Berger, G., Müller, F., Lucyshyn, T., Pacher, G. & Friesenbichler, W., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  194. Published

    Wahrnehmungsnahe Messung des Sehens und Fühlens von Kunststoffoberflächen

    Gruber, D. P., Berger, G., Macher, J., Pacher, G. & Friesenbichler, W., 2013, 22. Leobener Kunststoff-Kolloquium: Oberlfächen und Grenzflächen in der Polymertechnologie. p. 138-149

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  195. 2012
  196. Published

    Explosive cartridge

    Moser, P. (Inventor), Bauer, F. (Inventor), Friesenbichler, W. (Inventor), Fertschej, A. (Inventor) & Schatzer, R. (Inventor), 27 Sept 2012, IPC No. F42D 1/ 10 A I, Patent No. AU2011231560, Priority date 25 Mar 2011, Priority No. WO2011EP54635

    Research output: Patent

  197. Published

    Verfahren zur Herstellung eines synthetischen Papiers und damit hergestelltes Papier

    Laske, S. (Inventor), Friesenbichler, W. (Inventor), Langecker, G. (Inventor), Achatz, P. (Inventor) & Burkhalter, R. (Inventor), 15 Jan 2012, Patent No. A 28/2009

    Research output: Patent

  198. Published

    Compression induced heating of rubber compounds under processing conditions

    Perko, L., Friesenbichler, W. & Fellner, C., 2012, Abstract Book - The 28th International Conference of Polymer Processing Society (PPS-28). p. 424-424

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  199. Published

    Elongational viscosity of rubber compounds and improving corresponding models

    Perko, L., Friesenbichler, W., Buchebner, V., Chaloupka, G. & Obendrauf, W., 2012, 5th International PMI Conference - Conference Proceedings. p. 141-146

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  200. Published

    Functional Mold Coatings for Dynamic Mold Surface Temperature Control in Injection Molding. Simulation of Joule Heating of Thin Films and Development of a Test System.

    Pacher, G., Berger, G., Friesenbichler, W. & Weiß, H., 2012, Abstract Book - The 28th International Conference of Polymer Processing Society (PPS-28). p. 495-495

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  201. Published

    Functional Mold Coatings for Dynamic Mold Surface Temperature Control in Injection Molding. Simulation of Joule Heating of Thin Films and Development of a Test System.

    Pacher, G., Berger, G., Friesenbichler, W. & Weiß, H., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  202. Published

    Influence of dynamic mold temperature processes on the weld line strength of bi-directional filled tensile bars. A new multi-functional test injection mold to examine surface defects, thin-wall parts and frozen layer formation.

    Berger, G., Pacher, G. & Friesenbichler, W., 2012, Abstract Book - The 28th International Conference of Polymer Processing Society (PPS-28). p. 215-215

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  203. Published

    Injection molding compounding of polymer nanocomposites

    Battisti, M. & Friesenbichler, W., 2012, Abstract Book - The 28th International Conference of Polymer Processing Society (PPS-28). p. 278-278

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  204. Published

    Injection molding compounding of PP polymer nanocomposites

    Battisti, M. & Friesenbichler, W., 2012, 5th International PMI Conference - Conference Proceedings. p. 134-140

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  205. Published

    Methods for measuring elongational viscosity of rubber compounds and enhancement of corresponding models

    Perko, L., Friesenbichler, W. & Obendrauf, W., 2012, BOOK OF ABSTRACTS ICR 2012 – XVIth International Congress on Rheology. p. 271-271

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  206. Published

    Spritzgießcompoundieren nanoverstärkter Polypropylen-Compounds

    Battisti, M. & Friesenbichler, W., 2012, 21. Leobener Kunststoff-Kolloquium: Mit Compoundieren zum Erfolg. p. 61-68

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  207. Published

    Spritzgießen reaktiver Formmassen

    Friesenbichler, W. & Perko, L., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  208. Published

    Spritzgießen von Kunststoffen

    Friesenbichler, W., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  209. Published

    Systematische Entwicklung von Spritzguss-Bauteilen

    Friesenbichler, W., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  210. Published

    Больше блеска, меньше стыков (More gloss, less welding lines)

    Berger, G., Roock, S., Steinbichler, G., Gießauf, J., Gruber, D. P. & Friesenbichler, W., 2012, In: Plastiks. 113, 7, p. 26-29

    Research output: Contribution to journal › Article › Research › peer-review

  211. 2011
  212. Published

    EXPLOSIVE CARTRIDGE

    Moser, P. (Inventor), Bauer, F. (Inventor), Friesenbichler, W. (Inventor), Fertschej, A. (Inventor) & Schatzer, R. (Inventor), 29 Sept 2011, IPC No. F42D 1/ 10 A I, Patent No. CA2793308, Priority date 25 Mar 2011, Priority No. WO2011EP54635

    Research output: Patent

  213. Published

    EXPLOSIVE CARTRIDGE

    Moser, P. (Inventor), Bauer, F. (Inventor), Friesenbichler, W. (Inventor), Fertschej, A. (Inventor) & Schatzer, R. (Inventor), 29 Sept 2011, IPC No. F42D 1/ 10 A I, Patent No. WO2011117394, Priority date 25 Mar 2010, Priority No. EP20100157815

    Research output: Patent

  214. Published

    Explosive cartridge cartouche explosive

    Bauer, F. (Inventor), Fertschej, A. (Inventor), Friesenbichler, W. (Inventor), Moser, P. (Inventor) & Schatzer, R. (Inventor), 25 Mar 2011

    Research output: Patent

  215. Published

    A new injection moulding machine rheometer to study the rheological behaviour of polymer melts at very high shear-rates

    Selvasankar, R. K., Duretek, I., Friesenbichler, W. & Holzer, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  216. Published

    Cluster Award 2011 - Das beste Kooperationsprojekt zwischen Unternehmen und F&E Einrichtung

    Friesenbichler, W., 2011, In: Österreichische Kunststoff-Zeitschrift. p. 229-230

    Research output: Contribution to journal › Article › Research › peer-review

  217. Published

    Development and validation of a physical model for the expansion injection molding process

    Friesenbichler, W., Rajganesh Jegadeesan, X. & Steinbichler, G., 2011,

    PPS 27: Program & Abstracts

    .     p. 199-199

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  218. Published

    Feierliche Inbetriebnahme des weltweit einzigartigen MUL-Spritzgießcompounders

    Friesenbichler, W. & Battisti, M., 2011, In: VLK-News. p. 18-19

    Research output: Contribution to journal › Article › Research › peer-review

  219. Published

    Feierliche Inbetriebnahme des weltweit einzigartigen MUL-Spritzgießcompounders

    Friesenbichler, W. & Battisti, M., 2011, In: Österreichische Kunststoff-Zeitschrift. p. 292-292

    Research output: Contribution to journal › Article › Research › peer-review

  220. Published

    Improving the polymer surface quality by infrared radtiation driven dynamic mold temperature control

    Berger, G., Roock, S., Gruber, D. P., Friesenbichler, W. & Steinbichler, G., 2011,

    PPS 27: Program & Abstracts

    .     p. 199-199

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  221. Published

    Influence of steel-, polymer grade and surface roughness on wetting

    Lugger, M., Schmied, F., Berger, G., Teichert, C. & Friesenbichler, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  222. Published

    Leichtbaupotentiale in der E-Mobility: Kunststofftechnische Herausforderungen beim Batteriegehäuse

    Kienzl, W., Berger, G. & Friesenbichler, W., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 131-142

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  223. Published

    Measuring the pressure dependent viscosity at high shear rates using a new rheological injection mould

    Friesenbichler, W., Duretek, I., Rajganesh Jegadeesan, X. & Selvasankar, R. K., 2011, In: Polimery/Polymers. 56, 1, p. 58-62

    Research output: Contribution to journal › Article › Research › peer-review

  224. Published

    Nachruf auf O.Univ.-Prof. i. R. Dr. rer. nat. Dipl.-Phys. Werner Knappe

    Friesenbichler, W., 2011, In: Österreichische Kunststoff-Zeitschrift. p. 294-295

    Research output: Contribution to journal › Article › Research › peer-review

  225. Published

    Neue Maplan-Gummispritzmaschine für die Kunststofftechnik Leoben

    Friesenbichler, W., 2011, In: Österreichische Kunststoff-Zeitschrift. p. 293-293

    Research output: Contribution to journal › Article › Research › peer-review

  226. Published

    Novel approach to the measurement of the visual perceptibility of sink marks on injection molding parts

    Gruber, D. P., Berger, G., Pacher, G. & Friesenbichler, W., 2011, In: Polymer Testing. p. 651-656

    Research output: Contribution to journal › Article › Research › peer-review

  227. Published

    Replication of Stochastic and Geometric Micro Structures. Aspects of Visual Appearance

    Berger, G., Gruber, D. P., Friesenbichler, W., Teichert, C. & Burgsteiner, M., 2011, In: International polymer processing. XXVI, p. 313-322

    Research output: Contribution to journal › Article › Research › peer-review

  228. 2010
  229. Published

    40 Jahre Kunststofftechnik Leoben

    Friesenbichler, W. (Editor), 2010, Österreich: Eigenverlag.

    Research output: Book/Report › Book › Research

  230. Published

    Ein innovativer systematischer Ansatz für die beschleunigte Produktentwicklung von komplexen Spritzgießteilen

    Friesenbichler, W., Brunnthaler, M., Altendorfer, F. & Bürtlmair, H., 2010, In: Österreichische Kunststoff-Zeitschrift. p. 10-13

    Research output: Contribution to journal › Article › Research › peer-review

  231. Published

    Hochglanzoberflächen beim Spritzgießen - Quantitative topografische Beurteilung der Formenstahl- und Kunststoffoberfläche

    Berger, G., Friesenbichler, W., Reitter, M., Jutz, S. & Langecker, G., 2010, In: MP materials testing : Materialprüfung . 52, p. 211-221

    Research output: Contribution to journal › Article › Research › peer-review

  232. Published

    Hochglanzoberflächen beim Spritzgießen. Quantitive topografische Beurteilung der Formenstahl- und Kunststoffoberfläche

    Berger, G., Friesenbichler, W., Reitter, M., Jutz, S. & Langecker, G., 2010, In: MP materials testing : Materialprüfung . 52, p. 211-221

    Research output: Contribution to journal › Article › Research › peer-review

  233. Published

    Measurement of pressure dependent viscosity and its influence on injection molding simulation

    Friesenbichler, W., Rajganesh Jegadeesan, X., Lucyshyn, T., Filz, P. & Webelhaus, K., 2010, 4th International PMI Conference - Conference Proceedings. p. 215-219

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  234. Published

    Novel methodologies for the measurement of preceptual surface properties

    Gruber, D. P. & Friesenbichler, W., 2010, Book of Abstracts. p. 63-63

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  235. Published

    Overview of influences on demolding forces in injection molding

    Berger, G. & Friesenbichler, W., 2010, 4th International PMI Conference - Conference Proceedings. p. 197-206

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  236. Published

    Physical model for the expansion injection molding process and degradation effects on the injection molded parts

    Friesenbichler, W., Rajganesh Jegadeesan, X., Steinbichler, G. & Aust, N., 2010, 4th International PMI Conference - Conference Proceedings. p. 220-226

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  237. Published

    Praxisnahe Viskositäten für die Simulation

    Friesenbichler, W., Duretek, I. & Rajganesh Jegadeesan, X., 2010, In: Kunststoffe. 3, p. 37-40

    Research output: Contribution to journal › Article › Research › peer-review

  238. Published

    The abrasive wear of plastic mould steels as a function of steel hardness

    Oláh, L., Friesenbichler, W. & Zinner, S., 2010, Book of Abstracts. p. 112-113

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  239. Published

    The abrasive wear of plastic mould steels as a function of steel hardness

    Oláh, L., Friesenbichler, W. & Zinner, S., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  240. Published

    Virtual Process Design in Expansion Injection Molding

    Rajganesh Jegadeesan, X., Friesenbichler, W. & Steinbichler, G., 2010, In: Kunststoffe <München> / Kunststoffe international. 100, p. 148-152

    Research output: Contribution to journal › Article › Research › peer-review

  241. Published

    Virtuelle Prozessauslegung beim Expansionsspritzgießen

    Rajganesh Jegadeesan, X., Friesenbichler, W. & Steinbichler, G., 2010, In: Kunststoffe. p. 204-208

    Research output: Contribution to journal › Article › Research › peer-review

  242. 2009
  243. Published

    Abrasive wear measurements of various polyamide compounds under real-injection molding conditions

    Oláh, L. & Friesenbichler, W., 2009,

    PPS 2009 Programme & Abstracts

    .     p. 56-56

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  244. Published

    Advanced compounding: extrusion of polypropylene nanocomposites using the melt pump

    Kracalik, M., Laske, S., Gschweitl, M., Friesenbichler, W. & Langecker, G., 2009, In: Journal of Applied Polymer Science. 113, p. 1422-1428

    Research output: Contribution to journal › Article › Research › peer-review

  245. Published

    A Wizard to Get the Processing Conditions for Injection Molds

    Fertschej, A., Friesenbichler, W. & Windhager, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  246. Published

    A Wizard to Get the Processing Conditions for Injection Molds

    Fertschej, A., Friesenbichler, W., Windhager, W. & Meister, M., 2009

    Research output: Non-textual form › Web publication/site › Research

  247. Published

    Biopolymer Paper for Laser Printing Applications

    Laske, S., Piontek, M., Friesenbichler, W., Wallner, G., Achatz, P., Burkhalter, R. & Langecker, G., 2009, PPS-25 Program & Abstracts. p. 78-78

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  248. Published

    Biopolymer Paper for Laser Printing Applications: 25th Annual Meeting of the Polymer Processing Society

    Langecker, G., Laske, S., Piontek, M., Friesenbichler, W., Wallner, G., Achatz, P. & Burkhalter, R., 2009

    Research output: Non-textual form › Web publication/site › Research

  249. Published

    Demolding Forces and Coefficients of Friction in Injection Molding. A new Mold and first results

    Berger, G., Friesenbichler, W., Schöfer, G. & Freudenschuß, G., 2009, In: Purasuchikkusu-eji = Plastics age. 55, p. 87-94

    Research output: Contribution to journal › Article › Research › peer-review

  250. Published

    Demolding forces and coefficients of friction in injection molding. A new practical measurement apparatus

    Berger, G. & Friesenbichler, W., 2009, Proceedings of ANTEC 2009. p. 1699-1703

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  251. Published

    Estimation of reinforcement in compatibilized polypropylene nanocomposites by extensional rheology

    Laske, S., Kracalik, M., Gschweitl, M., Feuchter, M., Maier, G., Pinter, G., Thomann, R., Friesenbichler, W. & Langecker, G., 2009, In: Journal of Applied Polymer Science. 111, p. 2253-2259

    Research output: Contribution to journal › Article › Research › peer-review

  252. Published

    Estimation of reinforcement in compatibilized polypropylene nanocomposites by extensional rheology

    Laske, S., Kracalik, M., Gschweitl, M., Feuchter, M., Maier, G., Pinter, G., Thomann, R., Friesenbichler, W. & Langecker, G., 2009, In: VLK-News. 17. Jahrg., p. 6-8

    Research output: Contribution to journal › Article › Research › peer-review

  253. Published

    Influence of cavity pressure and injection rate on the surface roughness of PP, PC, ABS and ABS-PC

    Pacher, G., Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  254. Published

    Influence of cavity pressure and injection rate on the surface roughness of PP, PC, ABS and ABS-PC

    Pacher, G., Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  255. Published

    Influence on Demolding in Injection Moulding

    Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  256. Published

    Influence on Demolding in Injection Moulding

    Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  257. Published

    Influences of steel grade and surface roughness on demolding forces in injection molding

    Berger, G., Friesenbichler, W. & Perko, J., 2009, Proceedings TOOL09. p. 25-37

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  258. Published

    Influences of Surface Roughness and Polypropylene Grade on Demolding Forces and Coefficients of Friction

    Berger, G., Friesenbichler, W., Burgsteiner, M. & Lorenz, B., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  259. Published

    Influences of Surface Roughness and Polypropylene Grade on Demolding Forces and Coefficients of Friction

    Berger, G., Friesenbichler, W. & Burgsteiner, M., 2009

    Research output: Non-textual form › Web publication/site › Research

  260. Published

    Measurement of pressure dependent viscosity and its influence on injection moulding simulation

    Holzer, C., Lucyshyn, T., Friesenbichler, W. & Duretek, I., 2009,

    Programme & Abstracts of PPS 2009

    .     p. 153-153

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  261. Published

    New Rheological Injection Mould to Measure Pressure Dependent Viscosity in High Shear Rate Range

    Friesenbichler, W., Rajganesh Jegadeesan, X., Duretek, I. & Ramesh Kumar, S., 2009,

    PPS-25 Program & Abstracts

    .     p. 185-185

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  262. Published

    Physical Model for the Expansion Injection Molding Process and Degradation Effects on the Injection Molded Parts due to Extreme Processing Conditions

    Jegadeesan, R., Friesenbichler, W., Langecker, G. & Steinbichler, G., 2009

    Research output: Non-textual form › Web publication/site › Research

  263. Published

    Pressure dependent viscosity and its importance for injection molding simulations

    Rajganesh Jegadeesan, X., Friesenbichler, W., Duretek, I., Filz, P. & Webelhaus, K., 2009, Conference Proceedings. p. 217-222

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  264. Published

    Replication of a draw-polished cavity surface into PP and PC. Influence of flow length, wall thickness and injection molding parameters

    Burgsteiner, M., Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  265. Published

    Replication of a draw-polished cavity surface into PP and PC. Influence of flow length, wall thickness and injection molding parameters

    Burgsteiner, M., Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  266. Published

    Semi-industrial approach for wear measurement in injection moulds

    Friesenbichler, W. & Oláh, L., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  267. Published

    Structure Replication in Injection Moulding

    Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  268. Published

    Structure Replication in Injection Moulding

    Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  269. Published

    Temperature and Pressure Dependence of Thermal Conductivity of Polypropylene Filled with Micro-Scale Fillers

    Duretek, I., Friesenbichler, W. & Kucher, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  270. Published

    Temperature and Pressure Dependence of Thermal Conductivity of Polypropylene Filled with Micro-Scale Fillers

    Duretek, I., Friesenbichler, W. & Kucher, C., 2009, Proceedings of a Conference on Polyolefins and Polymelamines. p. 96-98

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  271. Published

    Thermal Conductivity of Talc Filled Polypropylene Measured at High Pressures

    Duretek, I., Friesenbichler, W. & Kucher, C., 2009, PPS-25 Program & Abstracts . p. 135-135

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  272. Published

    Thermal Conductivity of Talc Filled Polypropylene Measured at High Pressures: 25th Annual Meeting of the Polymer Processing Society

    Duretek, I., Friesenbichler, W. & Kucher, C., 2009

    Research output: Non-textual form › Web publication/site › Research

  273. Published

    Viskositätsdaten für die Spritzgieß-Simulation

    Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  274. Published

    Wear of plastic mold steels under injection molding conditions

    Oláh, L. & Friesenbichler, W., 2009, In: Transactions of FAMENA. 33, p. 15-24

    Research output: Contribution to journal › Article › Research › peer-review

  275. 2008
  276. Published

    Advanced Compounding - Einsatz einer Schmelzepumpe und In-Line NIR Messtechnik für die Aufbereitung von Polypropylen Nanocomposites

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2008, Effizienz im Blickpunkt; Fakten - Technik - Konsequenzen. p. 1-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  277. Published

    Advanced Compounding of Polymer Nanocomposites: Assembling a Melt Pump and In-line Near Infrared Spectroscopy into Extrusion Line

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  278. Published

    A new practical measurement for demolding forces and coefficients of friction in injection molding

    Berger, G., Friesenbichler, W., Schöfer, G. & Freudenschuß, G., 2008, Proceeding of the PPS-24. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  279. Published

    New Insights into Feedstock Behaviour and Injection Moulding Simulation for PIM

    Kukla, C., Duretek, I., Friesenbichler, W. & Thornagel, M., 2008, Euro PM2008 Proceedings Vol 2. p. 287-292

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  280. Published

    Optimization of Compatibilizer Admixture in Polypropylene-Organclay Nanocomposites by Extensional Rheology

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2008, ASPM 2008 - 9th Austrian Polymer Meeting - Book of Abstracts. p. 43-43

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  281. Published

    Qualitätsgesicherte Aufbeereitung von Polymer-Nanocomposites unter Verwendung von in-line NIR-Spektroskopie

    Friesenbichler, W., Kracalik, M. & Laske, S., 2008, Extrusion - Rheologie und neue Technolgien zur Steigerung der Produktvität - Fortbildungsseminar. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  282. 2007
  283. Published

    Investigations of the Rheology and Reactivity of Extrudable Wood-Resin Compounds

    Braun, J., Duretek, I., Müller, U., Friesenbichler, W. & Endesfelder, A., 3 Apr 2007, In: Monatshefte für Chemie = Chemical monthly. 138.2007, p. 337-341 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  284. Published

    Simulation des spritzgießprozesses von mikrobauteilen

    Cramer, A., Michaeli, W., Friesenbichler, W. & Duretek, I., 1 Jan 2007, In: Zeitschrift Kunststofftechnik = Journal of plastics technology. 1

    Research output: Contribution to journal › Article › Research › peer-review

  285. Published

    Abrasive/corresive wear on plastic mold steels, measured under practical processing conditions

    Friesenbichler, W., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  286. Published

    Abrasive/corresive wear on plastic mold steels, measured under practical processing conditions

    Friesenbichler, W., Berger, G. & Perko, J., 2007, PPS-23 Program and Book of Abstracts. p. 176-176

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  287. Published

    Abrasive/corresive wear on plastic mold steels, measured under practical processing conditions: PPS-23 The Polymer Processing Society 23rd Annual Meeting

    Friesenbichler, W., Berger, G. & Perko, J., 2007

    Research output: Non-textual form › Web publication/site › Research

  288. Published

    Charakterisierung von Spritzgieß-Formteiloberflächen

    Berger, G., Friesenbichler, W. & Gruber, D. P., 2007, In: KC-aktuell (Informationen aus dem Kunstoff-Cluster). p. 2-3

    Research output: Contribution to journal › Article › Research › peer-review

  289. Published

    Fast Determination of Reinforcement in Polymer Nanocomposites

    Kracalik, M., Laske, S., Gschweitl, M., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2007, NanoEurope 2007. p. 13-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  290. Published

    Simulation der Spritzgießprozesses von Mikrobauteilen

    Cramer, A., Michaeli, W., Friesenbichler, W. & Duretek, I., 2007, In: Zeitschrift Kunststofftechnik : Journal of plastics technology. 3, p. 1-26

    Research output: Contribution to journal › Article › Research › peer-review

  291. 2006
  292. Published

    19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung

    Friesenbichler, W. (Editor) & Laske, S. (Editor), 2006, Eigenverlag.

    Research output: Book/Report › Book › Research

  293. Published

    Abrasive/corresive Wear on Plastic Mould Steels, measured under practical conditions

    Friesenbichler, W., Langecker, G. & Caliskanoglu, D., 2006, Tooling Materials and their applications from research to market. p. 267-290

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  294. Published

    A new practical testing apparatus to evaluate corrision on plastic mold steel

    Friesenbichler, W., Berger, G., Langecker, G., Caliskanoglu, D., Hiebeler, B. J. & Perko, J., 2006, Tooling materials and their applications from research to market. p. 291-298

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  295. Published

    Detection of Surface Structure and Appearance of Injection Molded Parts.

    Langecker, G., Friesenbichler, W., Berger, G. R. & Gruber, D., 2006, Program and Abstracts of the 22nd Annual Meeting of the Polymer Processing Society, Yamagata, Japan 2006. p. 218-218

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  296. Published

    Forschung für die Praxis am Institut für Kunststoffverarbeitung - Ausewählte Beispiele aus den Arbeiten der letzten 17 Jahre

    Friesenbichler, W., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-36

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  297. Published

    Hochglanzoberflächen von Spritzgussteilen, Herstellung und Charakterisierung

    Friesenbichler, W., Langecker, G., Berger, G., Reitter, M. & Jutz, S., 2006, 19. Leobener Kunststoff Kolloqium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  298. Published

    Investigation of the rheology and reactivity of extrudable wood-resin-compounds

    Braun, J., Duretek, I., Müller, U., Friesenbichler, W. & Endesfelder, A., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  299. Published

    Praxisnahe Prüfmethoden für die Messung des abrasiven und korrosiven Verschleißes

    Friesenbichler, W., Berger, G. & Perko, J., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  300. Published

    Praxisnahe Verschleißprüfung

    Friesenbichler, W., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  301. Published

    Study on rheological behaviour of polymer melts at high shear rates using a new micro-rheology technique

    Duretek, I., Friesenbichler, W., Schuschnigg, S., Jegadeesan, R. & Langecker, G., 2006, Past and future of polymer engineering technology and science. p. 117-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  302. Published

    Study on rheological behaviour of polymer melts at increased pressure levels with the consideration of the compression heat

    Rajganesh Jegadeesan, X., Friesenbichler, W., Duretek, I., Schuschnigg, S. & Langecker, G., 2006, The Chain of Knowledge - From Catalyst to Application. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  303. Published

    Viskositätsmessungen bei extrem hohen Schergeschwindigkeiten unter Berücksichtigung von Schererwärmung und Druckeinfluss

    Duretek, I., Friesenbichler, W., Schuschnigg, S. & Rajganesh Jegadeesan, X., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  304. 2005
  305. Published

    Investigation of Flow Behaviour of Extrudable Wood/Melamine Resin Composites

    Nguyen, H. L., Duretek, I., Müller, U., Friesenbichler, W. & Endesfelder, A., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  306. Published

    Investigation of Flow Behaviour of Extrudable Wood/Melamine Resin Composites

    Nguyen, H. L., Duretek, I., Müller, U., Friesenbichler, W. & Endesfelder, A., 2005, Proceedings of the 2nd Annual European Rheology Conference. p. ---

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  307. Published

    Polymer Melt Rheology at High shear rates Using a New Micro-Rheology Technique,

    Friesenbichler, W., Langecker, G., Duretek, I. & Schuschnigg, S., 2005, Proceeding of the 21st Annual Meeting of the Polymer Processing Society. p. 87--

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  308. 2004
  309. Published

    Rheological Characterization of Extrudable Wood/Melamine Resin Composites

    Müller, U., Nguyen, H. L., Rätzsch, M., Duretek, I. & Friesenbichler, W., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  310. 1998
  311. Published

    Rheological measurements on the by-pass-extrusion rheometer at flexible polyvinylchloride

    Duretek, I., Friesenbichler, W. & Langecker, G., 1998, Application and processing of plastics and rubber. p. 31-35

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  312. 1996
  313. Published

    Auswirkung der Versuchsparameter auf die Meßergebnisse von p-v-T-Diagrammen für Thermoplaste und Kautschuke

    Duretek, I., Langecker, G. & Friesenbichler, W., 1996, In: Polimeri. 17, p. 177-182

    Research output: Contribution to journal › Article › Research › peer-review

  314. 1995
  315. Published

    Auswirkung der Versuchsparameter auf die Messergebnisse von pvT-Diagrammen für Thermoplaste und Kautschuke

    Duretek, I., Langecker, G. & Friesenbichler, W., 1995, 13.Days of Plastics and Rubber Engineers Society. p. 66-69

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

View graph of relations

Latest Research Output

View more (290)