Walter Friesenbichler

(Former)

1 - 100 out of 290Page size: 100

Research output

  1. 2025
  2. Published

    Upcycling of regenerates and injection molding through a new technological approach

    Shahroodi, Z., Zidar, D., Krempl, N., Friesenbichler, W. & Holzer, C., 24 Jan 2025, PPI 2024 : International Conference on Polymer Process Innovation, Proceedings. p. 219-223 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. 2024
  4. Published

    An Investigation on The Effects of Post-industrial Glass Fiber Flakes on the Properties of Recycled Polypropylene

    Raguz, I., Shahroodi, Z., Krempl, N., Arbeiter, F., Friesenbichler, W. & Holzer, C., 23 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  5. 2023
  6. Published

    Wear phenomenon in injection molding

    Zidar, D., Friesenbichler, W. & Blutmager, A., 23 May 2023, In: AIP Conference Proceedings. 2607.2023, 1, 6 p., 040003.

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2022
  8. Published

    Wanted: Höchste Qualität bei der Spritzgießsimulation

    Friesenbichler, W., 1 Oct 2022, In: KC-aktuell (Informationen aus dem Kunstoff-Cluster). 2022, 3, p. 14-15 2 p.

    Research output: Contribution to journal › Article › Research

  9. E-pub ahead of print

    Hardness Loss of Plastic Mold Steels: Phenomenon in Injection Molding

    Zidar, D., Landefeld, A., Gschöpf, B., Schnitzer, R., Zunko, H. & Friesenbichler, W., 28 Sept 2022, (E-pub ahead of print) In: Steel research international. 2022, 11, 7 p., 2200326.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Hardness Loss of Plastic Mold Steels: Phenomenon in Injection Molding

    Zidar, D., Landefeld, A., Gschöpf, B., Schnitzer, R., Zunko, H. & Friesenbichler, W., 28 Sept 2022, In: Steel research international. 94.2022, 4, 7 p., 2200326.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    LightCycle: Upcycling of regenerates and injection moulding into high quality light weight components using a new technological approach

    Krempl, N. & Friesenbichler, W., 15 Sept 2022.

    Research output: Contribution to conference › Poster › Research

  12. 2021
  13. Published

    On the Influence of Viscoelastic Modeling in Fluid Flow Simulations of Gum Acrylonitrile Butadiene Rubber

    Stieger, S., Mitsoulis, E., Walluch, M., Ebner, C., Roman Christopher, K., Haselmann, M., Mostafaiyan, M., Kämpfe, M., Kühnert, I., Wießner, S. & Friesenbichler, W., 15 Jul 2021, In: Polymers. 13.2021, 14, 18 p., 2323.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Viscoelastic Modelling and Fluid Flow Simulations of Acrylonitrile Butadiene Rubber

    Stieger, S., Mitsoulis, E., Roman Christopher, K. & Friesenbichler, W., 28 Jun 2021.

    Research output: Contribution to conference › Abstract › peer-review

  15. Published

    Application of organosilane coatings for improved anti-adhesive properties enabling facilitated demolding in polymer processing

    Bandl, C., Krempl, N., Berger-Weber, G., Kern, W. & Friesenbichler, W., 10 Mar 2021, In: Journal of Applied Polymer Science. 138.2021, 30, 9 p., 50714.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Temperature Profile in Rubber Injection Molding: Application of a Recently Developed Testing Method to Improve the Process Simulation and Calculation of Curing Kinetics

    Traintinger, M., Roman Christopher, K., Lechner, B., Friesenbichler, W. & Lucyshyn, T., 26 Jan 2021, In: Polymers. 13.2021, 3, p. 1-12 12 p., 380.

    Research output: Contribution to journal › Article › Research › peer-review

  17. 2020
  18. Published

    Rubber injection molding: Applying multivariate statistics to identify quality issues solely from process signals

    Hutterer, T., Berger-Weber, G., Kerschbaumer, R. C. & Friesenbichler, W., 15 Dec 2020, In: Polymer Engineering and Science. 61.2021, 4, p. 983-992 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Causes of the Gloss Transition Defect on High-Gloss Injection-Molded Surfaces

    Gim, J., Han, E., Rhee, B., Friesenbichler, W. & Gruber, D. P., 15 Sept 2020, In: Polymers. 12.2020, 9, 16 p., 2100.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Die Kunst der Entformung: Eine neu entwickelte Hybridbeschichtung reduziert die Entformungskraft im Spritzgießwerkzeug

    Krempl, N., Jilg, J., Schilp, C., Friesenbichler, W. & Moritzer, E., 2020, In: Kunststoffe. 2020, 2, p. 60 - 63 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. 2019
  22. Published

    Simple and rapid method for restoring anti-adhesive organosilane coatings on metal substrates

    Bandl, C., Kern, W., Krempl, N. & Friesenbichler, W., 20 Dec 2019, In: Progress in organic coatings. 140.2020, March, 105490.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Flow Visualization of Rubber Compounds

    Mitsoulis, E., Stieger, S., Roman Christopher, K. & Friesenbichler, W., 18 Nov 2019.

    Research output: Contribution to conference › Abstract › peer-review

  24. Published

    Contraction and Capillary Flow of a Carbon Black Filled Rubber Compound

    Stieger, S., Kerschbaumer, R. C., Mitsoulis, E., Fasching, M., Berger-Weber, G., Friesenbichler, W. & Sunder, J., 23 Oct 2019, In: Polymer engineering and science. 60.2020, 1, p. 32-43 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Processing Fiber-Reinforced Polymers: Specific Wear Phenomena Caused by Filler Materials

    Blutmager, A., Spahn, T., Varga, M., Friesenbichler, W., Riedl, H. & Mayrhofer, P. H., 18 Oct 2019, In: Polymer engineering and science. 60.2020, 1, p. 78-85 8 p.

    Research output: Contribution to journal › Article › Research

  26. Published

    Rheology and Capillary Flow Behavior of an HNBR Rubber Compound

    Mitsoulis, E., Stieger, S., Roman Christopher, K., Neunhäuserer, A. & Friesenbichler, W., 27 May 2019.

    Research output: Contribution to conference › Abstract › peer-review

  27. Published

    Influence of dissipation on abrasive wear of a powder metallurgical mold steel in plastics injection molding

    Friesenbichler, W., Zidar, D., Blutmager, A. & Gebauer, T., 16 May 2019, Proceedings of the 11th Tooling Conference & Exhibition. 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Flow Visualization of Rubber Compounds in Molding

    Stieger, S., Kerschbaumer, R. C., Mitsoulis, E., Fasching, M., Berger-Weber, G. & Friesenbichler, W., 14 May 2019, Conference book ERIF 2019. p. 42-57

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  29. Published

    Viscoelasticity and Processing of Rubber in Injection Molding with Cold Runner

    Friesenbichler, W., Stieger, S., Traintinger, M., Wolf, A. & Mitsoulis, E., 14 May 2019, Conference book ERIF 2019. p. 1-21

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  30. Published

    Viskoelastische Charakterisierung, Modellierung und Strömungssimulation hochgefüllter Kautschukmischungen

    Stieger, S., Roman Christopher, K., Berger-Weber, G. & Friesenbichler, W., 25 Apr 2019, 28. Leobener Kunststoff-Kolloquium: Simulation in der Kunststofftechnik. Leoben: Eigenverlag, Vol. 09. p. 78-88 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Efficient cooling of hot spots in injection molding. A biomimetic cooling channel versus a heat‐conductive mold material and a heat conductive plastics

    Berger-Weber, G., Zorn, D., Friesenbichler, W., Bevc, F. & Bodor, C. J., 9 Mar 2019, In: Polymer engineering and science. 59.2019, s2, p. E180-E188 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Thermal Degradation Kinetics of Polypropylene/Clay Nanocomposites Prepared by Injection Molding Compounder

    Kannan Vimalathithan, P., Barile, C., Casavola, C., Arunachalam, S., Battisti, M., Friesenbichler, W. & Vijayakumar, C. T., 1 Jan 2019, In: Polymer Composites. 2019, p. 1-10 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Fault detection in rubber injection molding with multivariate statistics

    Hutterer, T., Berger-Weber, G. & Friesenbichler, W., 2019, In: Rubber world. 2019, December, p. 40-44 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. 2018
  35. Published

    Abrasive/Erosive Wear on MMCs in Plastic Molds as a Function of Volumetric Flow Rates and Glass Fiber Distribution

    Blutmager, A., Varga, M., Schmidt, T., Pock, A. & Friesenbichler, W., 22 Nov 2018, In: Polymer engineering and science. 59.2019, S1, p. E302-E311 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Capillary Flow Behavior of a Rubber Compound

    Mitsoulis, E., Neunhäuserer, A., Stieger, S. & Friesenbichler, W., 7 Nov 2018.

    Research output: Contribution to conference › Abstract › peer-review

  37. Published

    Viscoelastic Material Characterization and Modelling of Industrial Rubber Compounds - K-BKZ Model

    Stieger, S., Kerschbaumer, R. C., Haselmann, M., Berger-Weber, G., Fasching, M., Duretek, I., Schuschnigg, S. & Friesenbichler, W., 7 Nov 2018.

    Research output: Contribution to conference › Abstract › peer-review

  38. Published

    Beschichtungen für Formen und Werkzeuge in der Kunststoff verarbeitenden Industrie

    Krempl, N., Kern, W., Bandl, C., Friesenbichler, W. & Gröger, T., Oct 2018, 2 p. 4020 Linz

    Research output: Other contribution › Research

  39. Published

    Determination of the temperature after dosing an industrial rubber compound. A new ultrasonic-based method

    Hutterer, T., Praher, B., Berger-Weber, G. & Friesenbichler, W., 5 Jul 2018. 1 p.

    Research output: Contribution to conference › Poster › Research

  40. Published

    A study on the Influence of Material Characterization Methods and Models on Rubber Injection Molding Simulation

    Stieger, S., Berger-Weber, G., Friesenbichler, W. & Fasching, M., 3 Jul 2018.

    Research output: Contribution to conference › Abstract › peer-review

  41. Published

    Flow behavior of PP‐polymer nanocomposites in injection molding hyperbolical dies

    Mitsoulis, E., Battisti, M., Neunhäuserer, A., Perko, L. & Friesenbichler, W., 24 Apr 2018, In: Advances in Polymer Technology. 37.2018, 8, p. 3045-3055 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Beschichtungen für Formen und Werkzeuge in der Kunststoff verarbeitenden Industrie

    Krempl, N., Bandl, C., Gröger, T., Kern, W., Friesenbichler, W. & Berger-Weber, G., 20 Apr 2018. 1 p.

    Research output: Contribution to conference › Poster › Research

  43. Published

    Advanced Part Quality Testing – Compression Set vs. Non-Destructive and Fast Measurement Device JIDOKA S101 II

    Kerschbaumer, R., Lechner, B. & Friesenbichler, W., 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    A Model to Describe the Transient Temperature Build Up During Dosing of a Rubber Injection Molding Machine

    Kerschbaumer, R. & Friesenbichler, W., 2018.

    Research output: Contribution to conference › Paper › peer-review

  45. Published

    Beschichtungen für Formen und Werkzeuge in der kunststoffverarbeitenden Industrie

    Krempl, N., Bandl, C., Gröger, T., Kern, W. & Friesenbichler, W., 2018, 27. Leobener Kunststoffkolloquium.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Beschichtung mit beschränkter Haftung

    Krempl, N., Bandl, C., Gröger, T., Kern, W. & Friesenbichler, W., 2018, In: Chemiereport.at : Austrian life sciences ; Österreichs Magazin für Chemie, Life Sciences & Materialwissenschaften. p. 49 52 p., 8.

    Research output: Contribution to journal › Article › Research

  47. Published

    Determination of the temperature of an industrial rubber compound after dosing. A new ultrasound based method

    Hutterer, T., Praher, B., Berger-Weber, G. & Friesenbichler, W., 2018.

    Research output: Contribution to conference › Paper › peer-review

  48. Published

    Online detection of storage-induced changes of rubber properties in the injection molding process

    Hutterer, T., Fasching, M. A., Berger-Weber, G. & Friesenbichler, W., 2018.

    Research output: Contribution to conference › Paper › peer-review

  49. 2017
  50. Published

    A study on cooling performance in injection molding. Heat conductive mold materials versus conformal cooling channels. Proceedings Europe Africa Conference 2017 of the POLYMER PROCESSING SOCIETY (PPS)

    Berger, G., Friesenbichler, W., Zorn, D. & Bevc, F., 22 Jun 2017

    Research output: Non-textual form › Digital or Visual Products › Research

  51. Published

    Viscosity Measurements for Rubber Compounds using Slit-die Rheometry: Proceedings Europe Africa Conference 2017 of the POLYMER PROCESSING SOCIETY (PPS)

    Friesenbichler, W. & Neunhäuserer, A., 22 Jun 2017

    Research output: Non-textual form › Digital or Visual Products › Research

  52. Published

    Kühlperformance beim Spritzgießen von Kunststoffen. Verleich einer konturnahen und einer blutgefäßartigen Werkzeugkühlung mit einem Formeinsatz höherer Wärmeleitfähigkeit

    Berger, G., Panzl, G., Zorn, D., Bevc, F. & Friesenbichler, W., Jun 2017, Rapid.Tech – International Trade Show & Conference for Additive Manufacturing : Proceedings of the 14th Rapid.Tech Conference Erfurt, Germany, 20 – 22 June 2017. Kynast, M., Eichmann, M. & Witt, G. (eds.). p. 123-139

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik

    Friesenbichler, W. & Berger, G., Apr 2017, Leoben: Eigenverlag. 275 p.

    Research output: Book/Report › Anthology › Research

  54. Published

    ADVANCES IN INJECTION MOLDING COMPOUNDING ON CARBON FOORPRINT IN THE PRODUCTION OF POLYMER NANOCOMPOSITES

    Neunhäuserer, A., Arunachalam, S. & Friesenbichler, W., Apr 2017

    Research output: Non-textual form › Digital or Visual Products › Research

  55. Published

    Das Kautschukspritzgießen - Maschinen-, Prozess- und Werkzeugtechnik

    Friesenbichler, W. & Kerschbaumer, R., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 107-128 22 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Das Kautschukspritzgießen - Maschinen-, Prozess- und Werkzeugtechnik

    Friesenbichler, W. & Kerschbaumer, R., Apr 2017, p. 107-128. 22 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  57. Published

    Die Physik der Oberfläche – Oberflächeneigenschaften und Haptik

    Friesenbichler, W., Gruber, D. P. & Haselmann, M., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 165-175 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Herausforderungen und Grenzen des Kautschukspritzgießens

    Fasching, M., Friesenbichler, W. & Berger, G., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 129-136 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Moffatt-Eddies: Existing in Rubber Processing?

    Kerschbaumer, R., Lechner, B. & Friesenbichler, W., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 257-258 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Strömungs- und Temperaturverhältnisse in der Kautschuk-Plastifiziereinheit

    Kerschbaumer, R., Lechner, B., Graninger, G. & Friesenbichler, W., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 155-164 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    THE IMPORTANCE OF VISCOELASTICITY AND PRESSURE DEPENDENCE OF VISCOSITY FOR SIMULATION OF MELT FLOW IN INJECTION MOLDING AND CAPILLARY RHEOMETRY

    Friesenbichler, W., Neunhäuserer, A., Fasching, M. A. & Mitsoulis, E., Apr 2017

    Research output: Non-textual form › Digital or Visual Products › Research

  62. Published

    Verbesserung der Wärmeleitfähigkeit von HDPE durch Einsatz mikro- und nanoskaliger Füllstoffe

    Stieger, S., Berger, G., Battisti, M. & Friesenbichler, W., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 247-248 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Flow behaviour of rubber in capillary and injection moulding dies

    Mitsoulis, E., Battisti, M., Neunhäuserer, A., Perko, L., Friesenbichler, W., Ansari, M. & Hatzikiriakos, S. G., 5 Mar 2017, In: Plastics, rubber and composites. 46.2017, 3, p. 110-118 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Determination of Thermal Conductivity of an Industrial Rubber Compound: Challenges, Problems and Comparison of Different Test Methods

    Kerschbaumer, R., Lechner, B., Tscharnutter, D., Wanner, A. J. & Friesenbichler, W., 2017, Conference Proceedings of the RubberCon.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Flow Behavior of PP-Polymer Nanocomposites in Capillary and Injection Molding Dies

    Mitsoulis, E., Battisti, M., Neunhäuserer, A., Perko, L. & Friesenbichler, W., 2017, In: International polymer processing. 32.2017, 2, p. 217-226 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. 2016
  67. Published

    Visualization of the Inlet Flow Behavior for Different Rubber Compounds using various Die Geometries

    Kerschbaumer, R., Perko, L., Lechner, B. & Friesenbichler, W., 28 Oct 2016, p. 1-2. 2 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  68. Published

    A First Approach to Visualize the Flow Behavior in the Screw Channel for a CSM-Rubber Compound

    Kerschbaumer, R., Lechner, B., Graninger, G., Haselmann, M. & Friesenbichler, W., Oct 2016, p. 1-2. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  69. Published

    A First Approach to Visualize the Flow Behavior in the Screw Channel for a CSM-Rubber Compound

    Kerschbaumer, R., Lechner, B., Graninger, G., Haselmann, M. & Friesenbichler, W., Oct 2016, p. 1-2. 2 p.

    Research output: Contribution to conference › Poster › Research › peer-review

  70. Published

    Visualization of the Inlet Flow Behavior for Different Rubber Compounds using various Die Geometries

    Kerschbaumer, R., Perko, L., Lechner, B. & Friesenbichler, W., Oct 2016, p. 1-2. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  71. Published

    On the Use of Bionic Cooling Structures in Injection Molding

    Berger, G., Zorn, D., Bodor, C., Friesenbichler, W. & Bevc, F., 22 Sept 2016, p. 155-161. 7 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  72. Published

    On the Use of Bionic Cooling Structures in Injection Molding

    Berger, G., Zorn, D., Bodor, C., Friesenbichler, W. & Bevc, F., 22 Sept 2016, p. 155-161. 7 p.

    Research output: Contribution to conference › Paper › peer-review

  73. Published

    On the Use of Bionic Cooling Structures in Injection Molding

    Berger, G., Zorn, D., Bodor, C., Friesenbichler, W. & Bevc, F., 22 Sept 2016, Conference Proceedings: 7th bi-annual International Conference of Polymers & Moulds Innovations. Gent, p. 155-161 7 p. 21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Simulation of Rubber Injection Molding - Challenges and Limitations

    Friesenbichler, W., Berger, G. & Fasching, M., 22 Sept 2016, p. 179-183. 4 p.

    Research output: Contribution to conference › Paper › peer-review

  75. Published

    Simulation of Rubber Injection Molding - Challenges and Limitations

    Friesenbichler, W., Berger, G. & Fasching, M., 22 Sept 2016, p. 179-183. 4 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  76. Published

    Simulation of Rubber Injection Molding - Challenges and Limitations

    Friesenbichler, W., Berger, G. & Fasching, M., 22 Sept 2016, Conference Proceedings: 7th bi-annual International Conference of Polymer & Moulds Innovations. Gent, p. 179-183 4 p. 34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Using elongational flow to enhance the properties of polypropylene nanocomposites

    Arunachalam, S., Battisti, M., Perko, L., Stieger, S. & Friesenbichler, W., 4 Aug 2016, In: SPE Plastics Research Online / Society of Plastic Engineers. 2016, 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    A New Device for Measuring Shear Viscosity of Rubbers on a Rubber Injection Molding Machine

    Fasching, M., Friesenbichler, W., Leitner, E. & Berger, G., Jul 2016, p. 1-5. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  79. Published

    Characterization of the Temperature Profile during Dosing of Different Rubber Compounds under Steady State Conditions by Means of a Specially Designed Screw Test Stand

    Kerschbaumer, R., Lechner, B., Graninger, G. & Friesenbichler, W., Jul 2016, p. 1-5. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  80. Published

    Influence of Processing Conditions and Filler Type and on the Crystallinity of PLA Compounds

    Pacher, G., Hutterer, T., Berger, G. & Friesenbichler, W., Jul 2016, p. 1-5. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  81. Published

    Development for Manufacturing Practice - Example Leoben

    Friesenbichler, W., 23 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  82. Published

    Rheometry of Polymer Melt using Processing Machines

    Friesenbichler, W., Neunhäuserer, A. & Duretek, I., 19 May 2016, p. 2-5. 4 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  83. E-pub ahead of print

    A novel online rheometer for elongational viscosity measurement of polymer melts

    Köpplmayr, T., Luger, H.-J., Burzic, I., Battisti, M., Perko, L., Friesenbichler, W. & Miethlinger, J., 23 Jan 2016, (E-pub ahead of print) In: Polymer Testing. 50.2016, April, p. 208-215 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    A study on the role of wetting parameters on friction in injection moulding

    Berger, G. R., Steffel, C. & Friesenbichler, W., 2016, In: International Journal of Materials and Product Technology. 52, 1-2, p. 193-211 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Determination of a robust process for a union nut. Why d-optimal DoE did not solve random impact behavior?

    Steffel, C., Berger, G. & Friesenbichler, W., 2016, In: AIP Conference Proceedings. 1779

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Influence of elongational flow generating nozzles on material properties of polypropylene nanocomposites. Part I

    Battisti, M., Perko, L., Arunachalam, S., Stieger, S. & Friesenbichler, W., 2016, In: Polymer engineering and science. p. n/a-n/a

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Optimization of twin screw extrusion using CFD for polymer/nanoclay composites

    Schuschnigg, S., Battisti, M., Winkler-Ebner, J., Friesenbichler, W. & Holzer, C., 2016, In: AIP Conference Proceedings.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Rheometry of polymer melts using processing machines

    Friesenbichler, W., Neunhäuserer, A. & Duretek, I., 2016, In: Korea-Australia Rheology Journal. 28, 3, p. 167-174 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Rheometry of Polymer Melt using Processing Machines

    Friesenbichler, W., Neunhäuserer, A. & Duretek, I., 2016, The 16th Internaional Symposium on Applied Rheology (ISAR). Korea, p. 2-5 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Vorrichtung und Verfahren zum Faserspritzgießen von Spritzgießteilen

    Petschnig, A. (Inventor), Rojach, M. (Inventor), Friesenbichler, W. (Inventor), Bodor, C. (Inventor), Bevc, F. (Inventor), Berger, G. (Inventor) & Schadler, W. (Inventor), 2016, 3 Dec 2015, Priority No. WO2015181296A1

    Research output: Patent

  91. 2015
  92. Published

    Methoden zur Bestimmung des Vernetzungsgrads an Kautschukformteilen

    Friesenbichler, W. & Fasching, M., 5 Nov 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  93. Published

    Methoden zur Bestimmung des Vernetzungsgrads an Kautschukformteilen

    Friesenbichler, W. & Fasching, M., 5 Nov 2015, Proceedings Rubber meets Science. 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Potentiale der Schlitzdüsenrheometrie für die rheologische Charakterisierung von Kunststoffschmelzen und -compounds

    Friesenbichler, W., Nov 2015, 24. Leobener Kunststoff-Kolloquium: Festkolloquium Kunststoffverarbeitung GRL 75. Leoben, Vol. 24. p. 37-56

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  95. Published

    An Investigation of Mechanical and Thermal Properties of Polypropylene Clay Nanocomposites Containing Different Nanoclays

    Arunachalam, S., Battisti, M. G., Vijayakumar, C. T. & Friesenbichler, W., 1 Oct 2015, In: Macromolecular materials and engineering. 300, 10, p. 966-976 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    A Study on Material Optimization for Polypropylene Nanocomposites Based On Layered Silicates Using Elongational Flow Devices

    Neunhäuserer, A., Friesenbichler, W. & Battisti, M., 23 Sept 2015, p. 28. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  97. Published

    A Study On Optimization Of Mechanical Properties for Polypropylene Nanocomposites Based On Layered Silicates Using Extensional Flow Inducing Multinozzle Systems

    Neunhäuserer, A., Battisti, M. & Friesenbichler, W., 23 Sept 2015, p. 26. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  98. Published

    Optimization of Twin Screw Extrusion using CFD for Polymer/Nanoclay Composites: Polymer Processing Society Regional Conference Graz 2015 Book of Abstracts

    Schuschnigg, S., Battisti, M., Winkler-Ebner, J., Friesenbichler, W. & Holzer, C., 21 Sept 2015, p. 182.

    Research output: Contribution to conference › Abstract

  99. Published

    Regional Conference Polymer Processing Society - Book of Abstracts

    Friesenbichler, W., Sept 2015, Eigenverlag. 336 p.

    Research output: Book/Report › Anthology › Research

  100. Published

    Potential for Cure Time Reduction in Rubber Injection Molding and its Analytical Prediction

    Friesenbichler, W., Perko, L. & Fasching, M., 2 Jul 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  101. Published

    Cartucho explosivo

    Moser, P. (Inventor), Bauer, F. (Inventor), Friesenbichler, W. (Inventor), Fertschej, A. (Inventor) & Schatzer, R. (Inventor), 25 Jun 2015, IPC No. F42D 1/ 10 A I, Patent No. ES2538987T, Priority date 25 Mar 2011, Priority No. WO2011EP54635

    Research output: Patent

  102. Published

    A Study on Material Optimization for Polypropylene Nanocomposites Based On Layered Silicates Using Elongational Flow Devices

    Friesenbichler, W., Battisti, M. & Neunhäuserer, A., 11 Jun 2015. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  103. Published

    A Study on Material Optimization for Polypropylene Nanocomposites Based On Layered Silicates Using Elongational Flow Devices

    Friesenbichler, W., Battisti, M. & Neunhäuserer, A., 11 Jun 2015, Proceedings of the PPS-31. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    Slit-die Rheometry and its Potential in Polymer Melt Rheology

    Friesenbichler, W., Perko, L. & Fasching, M., 11 Jun 2015. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  105. Published

    Slit-die Rheometry and its Potential in Polymer Melt Rheology

    Friesenbichler, W., Perko, L. & Fasching, M., 11 Jun 2015, Proceedings of the PPS-31. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  106. Published

    Potential for Cure Time Reduction in Rubber Injection Molding and its Analytical Prediction

    Friesenbichler, W. & Perko, L., 9 Jun 2015. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  107. Published

    Potential for Cure Time Reduction in Rubber Injection Molding and its Analytical Prediction

    Friesenbichler, W. & Perko, L., 9 Jun 2015, Proceedings of the PPS-31. 1 p. S12-226

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  108. Published

    Verkürzung der Vulkanisationszeit bei der Elastomerverarbeitung

    Perko, L. & Friesenbichler, W., 1 Jun 2015, In: GAK : Gummi, Fasern, Kunststoffe. 68, 6, p. 431-435 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  109. Published

    Potential for Cure Time Reduction in Rubber Injection Molding and its Analytical Prediction

    Friesenbichler, W., Perko, L. & Fasching, M., Jun 2015, Proceedings of the IRC and DKT 2015; ME E T ING POINT OF THE RUB B E R INDUS T R Y.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  110. Published

    Virtual Modelling of the Rubber Injection Molding Process including Verification in Industrial Scale Experiments

    Fasching, M., Friesenbichler, W. & Berger, G., Jun 2015, Proceedings of the IRC and DKT 2015; ME E T ING POINT OF THE RUB B E R INDUS T R Y.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  111. Published

    Short-term and long-term behavior of PP-polymer nanocomposites produced by injection molding compounding

    Battisti, M. G., Guttmann, P., Chitu, L. & Friesenbichler, W., 22 May 2015, Proceedings of PPS-30: The 30th International Conference of the Polymer Processing Society - Conference Papers. Vol. 1664. 700041

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (290)