Thomas Hatzenbichler

(Former)

1 - 100 out of 106Page size: 100

Research output

  1. 2015
  2. Published

    CHARACTERISATION OF SEVERAL LUBRICANTS IN CASE OF DIE FORGING OF ALUMINIUM ALLOYS BY THE RING COMPRESSION TEST

    Milosevic, I. & Hatzenbichler, T., 22 Sept 2015, 32nd Danubia-Adria Symposium on Advances in Experimental Mechanics.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Experimental characterization and modelling of triaxial residual stresses in straightened railway rails

    Kaiser, R., Stefenelli, M., Hatzenbichler, T., Antretter, T., Hofmann, M., Keckes, J. & Buchmayr, B., 2015, In: The Journal of Strain Analysis for Engineering Design. 50, 3, p. 190-198 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2014
  5. Published

    Simulation of the roller straightening process with respect to residual stresses and the curvature trend

    Kaiser, R., Hatzenbichler, T., Buchmayr, B. & Antretter, T., 2014, International Conference on Residual Stresses 9 (ICRS 9). p. 456-463

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Simulation und Optimierung der Prozesskette zur Herstellung profilierter Drähte durch Drahtziehen und Profilwalzen

    Kaiser, R., Hatzenbichler, T. & Buchmayr, B., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 220-225

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2013
  8. Published

    3D Finite Element Simulation of Pilger Mill Rolling

    Ragger, K., Kaiser, R., Hatzenbichler, T., Buchmayr, B., Paal, J. & Fluch, R., 2013,

    9th International Rolling Conferece & 6th European Rolling Conference,

    .     p. na-na

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Investigation and comparison of heat transfers analysis used in commercial FEM for metal forming

    Flitta, I., Hatzenbichler, T., Pschera, R., Wallner, S. & Buchmayr, B., 2013,

    15th International Conference on advances in Materials&Processing Technologies

    .     p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. 2012
  11. Published

    3D Finite Element Simulation of Cold Pilgering over the Whole Productive Time

    Strickner, G., Ragger, K., Hatzenbichler, T. & Buchmayr, B., 2012, Proceedings of the14th International Conference on Metal Forming 2012. p. 71-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    A finite element model for carburisation of surface densified PM components

    Eck, S., Ishmurzin, A., Wlanis, T., Ebner, R., Hatzenbichler, T. & Planitzer, F., 2012, In: International journal of computational materials science and surface engineering. 5, 1, p. 16-30

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    A new Concept to Design Drawing Tools with Respect to Central Demage

    Kaiser, R., Hatzenbichler, T. & Buchmayr, B., 2012, Proceedings of the14th International Conference on Metal Forming 2012. p. 1387-1390

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Deviation of the results obtained from different commercial finite element solvers due to friction formulation

    Hatzenbichler, T., Harrer, O.-K., Wallner, S., Planitzer, F., Kuss, M., Pschera, R. & Buchmayr, B., 2012, In: Tribology International. 49, p. 75-79

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Simulation of the roller straightening process with respect to residual stresses and the curvature trend

    Kaiser, R., Hatzenbichler, T., Buchmayr, B. & Antretter, T., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    Simulation von Kaltstauchprozessen unter Berücksichtigung einer Vorformoperation

    Hatzenbichler, T., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  17. 2011
  18. Published

    A simulation strategy to compute long-term die heating during radial forging

    Hatzenbichler, T., Wallner, S., Buchmayr, B., Prevedel, P. & Caliskanoglu, D., 2011, In: Steel grips : journal of steel and related materials. p. 57-61

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Erstellung eines numerischen Simulationsmodells am Beispiel des Walzens von Rippenplatten UIC60-0

    Harrer, O.-K., Buchmayr, B., Hatzenbichler, T. & Riedl, A., 2011, In: Kalibreur. 72, p. 69-71

    Research output: Contribution to journal › Article › Research › peer-review

  20. 2010
  21. Published

    Analyse und Diskussion verschiedener Verfahren der Eigenspannungsmessung anhand von laserbehandelten dünnwandigen Blechen

    Forstner, K., Figala, G., Hatzenbichler, T. & Buchmayr, B., 2010, XXIX. Verformungskundliches Kolloquium. p. 85-90

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Effect of different contact formulations used in commercial FEM software packages on the results of hot forging simulations

    Hatzenbichler, T., Buchmayr, B., Harrer, O.-K. & Planitzer, F., 2010, In: Metallurgia Italiana. 11-12, p. 11-15

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    EVARE - Neue Energien 2020 - Oberflächenverdichtung von schrägverzahnten Zahnrädern

    Walzl, A. & Hatzenbichler, T., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    FEM-Simulation of High-Speed Corrugation Process with Abaqus/Explicit

    Hatzenbichler, T., Buchmayr, B. & Weiss, S., 2010, Metal forming 2010 : proceedings of the 13th International Conference on Metal Forming, September 19 - 22, 2010, Hotel Nikko Toyohashi, Toyohashi, Japan . Mori, K.-I. (ed.). p. 1014-1017

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Finite element method simulation of internal defects in billet-to-billet extrusion

    Hatzenbichler, T. & Buchmayr, B., 2010, In: Proceedings of the Institution of Mechanical Engineers / B (Part B, Journal of engineering manufacture). p. 1029-1042

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    New developments in the field of continuous production of corrugated metal hoses

    Weiss, S., Hatzenbichler, T. & Buchmayr, B., 2010, In: Tube & pipe technology. 23, 4, p. 106-110

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Projektstatus Juni 2010 zum Projekt A3.5

    Planitzer, F., Hatzenbichler, T., Planitzer, C. & Schiller, W., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    Projektstatus September 2010 zum Projekt A3.5

    Hatzenbichler, T., Planitzer, F., Planitzer, C. & Schiller, W., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Simulation des Zentrierlochens von Blöcken

    Hatzenbichler, T., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    Simulation of cold forging under consideration of residual stresses induced by preceding drawing

    Hatzenbichler, T., Buchmayr, B. & Walzl, A., 2010, AMPT 2010 "Advances in Materials and Processing Technologies". p. 321-326

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. 2009
  32. Published

    Charakterisierung eines Radialschmiedeprozesses zum Oberflächenverdichten von P/M Zahnrädern mittels FEM

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2009, Charakterisierung eines Radialschmiedeprozesses zum Oberflächenverdichten von P/M Zahnrädern mittels FEM. p. 9-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Development and Validation of a Finite-Element Model for Radial Forging

    Wallner, S., Harrer, O.-K., Hatzenbichler, T. & Buchmayr, B., 2009, X International Conference on Computational Plasticity (Complas), Barcelona/Spain, (Tagungsband auf CD). p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Effect of different contact formulations used in commercial FEM-Software Packages on the results of hot forging simulations

    Hatzenbichler, T., Harrer, O.-K., Buchmayr, B. & Planitzer, F., 2009,

    Hot forming of Steels & Product Properties

    .     p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Entwicklung eines Testverfahrens zur Untersuchung der Schädigungsentwicklung in einem Stanzwerkzeug

    Gruber, P. J., Hatzenbichler, T., Ecker, W., Jesner, G., Ebner, R. & Kolednik, O., 2009, Entwicklung eines Testverfahrens zur Untersuchung der Schädigungsentwicklung in einem Stanzwerkzeug. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 99-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    FEM - Simulation of Long Term Die Heating during High - Frequency Incremental Hot Forging Processes

    Hatzenbichler, T., Wallner, S., Buchmayr, B., Prevedel, P. & Caliskanoglu, D., 2009,

    Material Science & Technology (MS&T 2009)

    .     p. 2247-2257

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    FEM study on the penetration of projectiles into steel sheets

    Hatzenbichler, T. & Buchmayr, B., 2009, In: International journal of material forming. Vol.2, p. 789-792

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    FEM Study on the Penetration of Projectiles into steel sheets

    Hatzenbichler, T. & Buchmayr, B., 2009, FEM Study on the Penetration of Projectiles into steel sheets. AIP Press, p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    FEM-Supported Development of a Radial Forging Process for Surface Densification of P/M Gears

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2009, FEM-Supported Development of a Radial Forging Process for Surface Densification of P/M Gears. AIP Press, p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    FEM-Supported Development of a Radial Forging Process for Surface Densification of P/M Gears

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2009, In: International journal of material forming. 2, p. 93-96

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Investigation of a Cogging Process for Surface Densification of PM Gears by FEM Simulation

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2009,

    Proceedings of the MPIF/APMI International Conference on Powder Metallurgy & Particulate Materials

    .     p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Projektstatus April 2009 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Projektstatus Jänner 2009 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Projektstatus Juni 2009 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  45. Published

    Projektstatus November 2009 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    Projektstatus Oktober 2009 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Projektstatus September 2009 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Reduction of Porosity in PM Components by Metal Forming Technologies

    Hatzenbichler, T., Buchmayr, B. & Planitzer, F., 2009, COMET MPPE Workshop Damage, Materials Center Leoben. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Simulation des Kopfstauchens unter Berücksichtigung des Vorzuges

    Hatzenbichler, T. & Buchmayr, B., 2009, Simulation des Kopfstauchens unter Berücksichtigung des Vorzuges. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 73-79

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. 2008
  51. Published

    Comparison of Yield Functions for Compressible PM-Materials

    Wallner, S., Hatzenbichler, T. & Buchmayr, B., 2008, XXVII. Verformungskundliche Kolloquium, 8.-11.3.2008, Planneralm/Donnersbach. Lehrstuhl für Umformtechnik. Bruno Buchmayr, p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Comparison of yield functions for pm-materials

    Wallner, S., Hatzenbichler, T. & Buchmayr, B., 2008, Metform Conference 2008. p. 473-478

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Creep and Fatigue Damage in Hot Work Tools Steels during Copper and Aluminium Extrusion

    Sommitsch, C., Wlanis, T., Hatzenbichler, T. & Riedl, C., 2008, Key engineering materials. p. 169-176 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  54. Published

    Implementieren von Fließbedingungen in DEFORM 3DTM zur FEM Simulation der Verdichtung von PM-Werkstoffen

    Wallner, S., Hatzenbichler, T. & Buchmayr, B., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 435-438

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Oberflächenverdichten von P/M-Zahnrädern durch Radialschmieden

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 430-434

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Projektstatus April 2008 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  57. Published

    Projektstatus Februar 2008 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  58. Published

    Projektstatus Juli 2008 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  59. Published

    Projektstatus Mai 2008 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  60. Published

    Projektstatus September 2008 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  61. Published

    Vergleichende Untersuchungen zum Eindring- und Durchziehverhalten von Feinblechen

    Buchmayr, B., Hatzenbichler, T. & Kessler, F., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 443-449

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Vorformoptimierung für das Gesenkschmieden mittels numerischer Simulation

    Hatzenbichler, T. & Buchmayr, B., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 413-417

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Werkstoff- und verfahrenstechnische Optimierung bei der Herstellung hochfester Schrauben

    Buchmayr, B., Hatzenbichler, T., Kienreich, R. & Beyer, S., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 423-429

    Research output: Contribution to journal › Article › Research › peer-review

  64. 2007
  65. Published

    A numerical sensitivity study to determine the main influence parameters on the back-end defect

    Buchmayr, B., Hatzenbichler, T. & Umgeher, A., 2007, In: Journal of materials processing technology. 182, p. 73-78

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Erster und zweiter Projektbericht Jänner 2007 Diplomarbeit Florian Planitzer zum Projekt: NK021-05

    Hatzenbichler, T. & Planitzer, F., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  67. Published

    Forschungsbericht Nr. 1 zum Projekt NK021-05

    Hatzenbichler, T. & Köppl, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  68. Published

    Forschungsbericht Nr. 2 zum Projekt NK021-05

    Hatzenbichler, T., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  69. Published

    Projektendbericht Dezember 2007 zum Projekt NK021-05

    Hatzenbichler, T. & Planitzer, F., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  70. Published

    Projektpräsentation Oktober 2007 zum Projekt NK021-05

    Hatzenbichler, T. & Planitzer, F., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  71. Published

    Projektstatus April 2007 zum Projekt NK021-05

    Hatzenbichler, T., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  72. Published

    Projektstatus Dezember 2007 zum Projekt NK021-05

    Hatzenbichler, T. & Planitzer, F., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  73. Published

    Projektstatus Februar 2007 zum Projekt NK021-05

    Hatzenbichler, T., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  74. Published

    Projektstatus Jänner 2007 zum Projekt NK021-05

    Hatzenbichler, T., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  75. Published

    Projektstatus Juli 2007 zum Projekt NK021-05

    Hatzenbichler, T., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  76. 2006
  77. Published

    Bestimmung von Materialparametern für poröse Werkstoffe

    Hatzenbichler, T., Planitzer, F., Buchmayr, B., Köppl, R. & Ecker, W., 2006, XXV. Verformungskundliches Kolloquium. p. 239-247

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Creep fatigue in extrusion dies - modelling and simulation

    Sommitsch, C., Wlanis, T., Hatzenbichler, T. & Wieser, V., 2006, In: Steel grips : journal of steel and related materials. 4, p. 51-55

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Determination of Material Parameters for porous Materials

    Hatzenbichler, T., Planitzer, F., Buchmayr, B., Köppl, R. & Ecker, W., 2006, ESAFORM 2006. p. 155-158

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Entwicklungszustand und Nutzen der FEM Simulation von Massivumformprozessen

    Hatzenbichler, T., Harrer, O.-K. & Buchmayr, B., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 469-474

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Gesamtüberblick über das MCL Projekt M8, Mai 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  82. Published

    Präsentation "Simulation of the radial forging process of pipes", Workpackage 1, Projekt P056-01-10, Juli 2006

    Hatzenbichler, T. & Wallner, S., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  83. Published

    Präsentation "Simulation of the radial forging process of pipes", Workpackage 2, Projekt P056-01-10, August 2006

    Hatzenbichler, T. & Wallner, S., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  84. Published

    Präsentation "Simulation of the radial forging process of pipes", Workpackage 3, Projekt P056-01-10, Juli 2006

    Hatzenbichler, T. & Wallner, S., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  85. Published

    Projektbericht "Berechnung der Werkzeugbelastung unter Verwendung der bisherigen Modelle für die Geometrien "Audi" und "TKP", MCL Projekt M8, März 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  86. Published

    Projektbericht P056-01-07 "Simulation of Radial Forging - Results with lower friction (shear 0,2) between mandrel and workpiece

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  87. Published

    Projektbericht "Simulation der Werkzeugbelastung für schrägverzahnte Zahnräder", Projekt MCL M8, November 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  88. Published

    Projektbericht "Simulation des Denscal-Prozesses für eine Kupplungsklaue"

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  89. Published

    Projektbericht "Simulation des Walzprozesses für die Geometrie "B", MCL Projekt M8, Mai 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  90. Published

    Projektbericht "Simulation des Walzprozesses für die Geometrie "TKP"", MCL Projekt M8, Jänner 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  91. Published

    Projektbericht "Simulation des Walzprozesses für die Geometrie "VW", MCL Projekt M8, Mai 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  92. Published

    Projektbericht "Stand der Simulation des Walzprozesses, Juli 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  93. Published

    Projektbericht "Stand der Simulation des Walzprozesses", Juni 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  94. Published

    Projektbericht "Stand der Simulation des Walzprozesses, MCL Projekt M8, September 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  95. Published

    Projektbericht "Stand des Simulation des Walzprozesses", Mai 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  96. Published

    Projektbericht "Versuch der Vorformauslegung für die Geometrie VW" Projekt MCL M8, April 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  97. Published

    Projektstatus 1. Quartal 2006, MCL Projekt M8

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  98. Published

    Projektstatus 2. Quartal 2006, MCL Projekt M8

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  99. Published

    Projektstatus 3. Quartal 2006, MCL Projekt M8

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  100. Published

    Vorhersage und Minimierung des Innenfehlerbereichs beim Block-auf-Block Strangpressen

    Hatzenbichler, T., 2006, 178 p.

    Research output: Thesis › Doctoral Thesis

  101. 2005
  102. Published

    12. Bericht zum Projekt "Vorhersage und Minimierung des Innenfehlerbereichs beim Block-auf-Block-Strangpressen"

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  103. Published

    13. Bericht zum Projekt "Vorhersage und Minimierung des Innenfehlerbereichs beim Block-auf-Block-Strangpressen"

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  104. Published

    Analyse und Verbesserung des bestehenden FEM Modells

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  105. Published

    Bestimmung der Reibzahl mittels Ringstauchversuch

    Hatzenbichler, T., Buchmayr, B., Hochmann, H., Fössl, T. & Zink, A., 2005, Sommerschule Steiermark. p. 161-170

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  106. Published

    Einfluss der Rezipientenreibung auf die Prozessparameter beim direkten Strangpressen

    Hatzenbichler, T., Buchmayr, B. & Umgeher, A., 2005, XXIV. Verformungskundliches Kolloquium. p. 53-63

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  107. Published

    "Feinabstimmung des Teilmodells" Projekt MCL M8

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  108. Published

    Gesenkschmieden von Portalachsen - Simulation und praktische Erfahrung

    Hein, G., Kollingbaum, M., Hatzenbichler, T. & Wollendorfer, G., 2005, XXIV. Verformungskundliches Kolloquium. p. 193-194

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  109. Published

    Influence of container friction on the main process parameters in direct extrusion

    Hatzenbichler, T., Buchmayr, B. & Umgeher, A., 2005, In: Steel grips : journal of steel and related materials. 3, p. 126-129

    Research output: Contribution to journal › Article › Research › peer-review

  110. Published

    Methods of controlling the cross-section in rolling mills for long products

    Harrer, O.-K., Hatzenbichler, T., Kostúr, K., Pástor, M. & Truchlý, M., 2005, In: Steel grips : journal of steel and related materials. 3, p. 375-379

    Research output: Contribution to journal › Article › Research › peer-review

  111. Published

    Projektbericht "Input data for the numerical simulation" Projekt P056-01-07

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1 2 Next
View graph of relations

Latest Research Output

View more (106)