Thomas Antretter

1 - 236 out of 236Page size: 500

Research output

  1. 2025
  2. Published

    On the effect of isotropic and anisotropic dissipative response functions with associated and nonassociated flow on the inelastic behavior of polymeric composites

    Gaddikere Nagaraja, S., Antretter, T. & Schuecker, C., 16 Feb 2025, In: Mechanics of advanced materials and structures. ??? Stand: 28. Februar 2025, ??? Stand: 28. Februar 2025, 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Finite Element Investigation of the Dynamic Behavior of High-Speed Turnouts with Swing-Nose Crossing

    Sistaninia, M., Daves, W., Bucher, C., Antretter, T. & Gänser, H. P., 2025, Advances in Dynamics of Vehicles on Roads and Tracks III - Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, Rail Vehicles. Huang, W. & Ahmadian, M. (eds.). p. 1047-1058 12 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    On the Road Towards Understanding Squats - Metallographic Investigations of Rails

    Gschwandl, T., Spalek, A., Antretter, T. & Daves, W., 2025, Advances in Dynamics of Vehicles on Roads and Tracks III - Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, Rail Vehicles. Huang, W. & Ahmadian, M. (eds.). p. 314-323 10 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. 2024
  6. Published

    A variational framework for Cahn–Hilliard-type diffusion coupled with Allen–Cahn-type multi-phase transformations in elastic and dissipative solids

    Gaddikere Nagaraja, S. & Antretter, T., 24 Sept 2024, In: International journal of plasticity. 182.2024, November, 20 p., 104131.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Modeling solute drag during austenite–ferrite transformation with ab initio binding energies

    Bloder, B. F., Scheiber, D., Raninger, P., Ecker, W. & Antretter, T., 17 May 2024, In: Materialia. 36.2024, August, 9 p., 102128.

    Research output: Contribution to journal › Article › Research › peer-review

  8. E-pub ahead of print

    Investigation of probable squat growth from initial surface cracks in rails using a three-dimensional rollover simulation

    Gschwandl, T. J., Antretter, T., Künstner, D., Scheriau, S. & Daves, W., 29 Apr 2024, (E-pub ahead of print) In: Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. 238.2024, 4, p. 406-413 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Multi-physical simulation of an inductive heat treatment process on 50CrMo4 steel rods and validation by HEXRD cross-sectional measurements

    Mevec, D. G., Raninger, P., Jászfi, V., Prevedel, P. & Antretter, T., 15 Apr 2024, In: Materialia. 34.2024, May, 102094.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    Numerical and experimental assessment of liquid metal embrittlement in externally loaded spot welds

    Prabitz, K. M., Antretter, T., Rethmeier, M., El-Sari, B., Schubert, H., Hilpert, B., Gruber, M., Sierlinger, R. & Ecker, W., 30 Jan 2024, (E-pub ahead of print) In: Welding in the world. 68.2024, 10, p. 2713-2722 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    A Chemo-Mechanically Coupled Model for the Prediction of Phase Segregation and Pore Formation in Microelectronic Solders

    Antretter, T., 7 Jan 2024.

    Research output: Contribution to conference › Presentation › Research › peer-review

  12. Published

    A comprehensive methodology for criticality assessment of microvias in printed circuit board assemblies

    Kamble, V. G., Patel, D. R., Schipfer, C., Thalhamer, A., Zuendel, J., Krivec, T., Antretter, T. & Fuchs, P. F., 2024, 2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024. Institute of Electrical and Electronics Engineers, (2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Exploring the Impact of Laser Drilling on Material Thermal Decomposition: A Computational Study Using KratosMultiphysics

    Peng, C., Tao, Q., Krivec, T., Casas, G., Latorre, S., Antretter, T., Macher, J. & Fuchs, P., 2024, 2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024. Institute of Electrical and Electronics Engineers, (2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. 2023
  15. Published

    Impact crusher kinematics: The dynamics of an impact swing mechanism as an analytical-mathematical model

    Kemper, D., Fimbinger, E., Antretter, T., Egger, M. & Flachberger, H., 20 Dec 2023, In: Results in Engineering. 21.2024, March, p. 101694 13 p., 101694.

    Research output: Contribution to journal › Article › Research › peer-review

  16. E-pub ahead of print

    Numerical treatment of reactive diffusion using the discontinuous Galerkin method

    Flachberger, W., Svoboda, J., Antretter, T., Petersmann, M. & Leitner, S., 13 Oct 2023, (E-pub ahead of print) In: Continuum Mechanics and Thermodynamics. 36.2024, January, p. 61-74 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    A breakage model for DEM based on a probabilistic particle replacement with Voronoi fragments

    Denzel, M., Prenner, M., Sifferlinger, N. A. & Antretter, T., 17 Aug 2023, In: Minerals engineering. 203.2023, November, 14 p., 108328.

    Research output: Contribution to journal › Article › Research › peer-review

  18. E-pub ahead of print

    A breakage model for DEM based on a probabilistic particle replacement with Voronoi fragments

    Denzel, M., Prenner, M., Sifferlinger, N. A. & Antretter, T., 17 Aug 2023, (E-pub ahead of print) In: Minerals engineering. 203.2023, November, 14 p., 108328.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Variational formulation of Cahn–Hilliard-type diffusion coupled with crystal plasticity

    Gaddikere Nagaraja, S., Flachberger, W. & Antretter, T., Aug 2023, In: International journal of plasticity. 167.2023, August, 22 p., 103652.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Experimental and Numerical Visualisation of Subsurface Rail Deformation in a Full-Scale Wheel–Rail Test Rig

    Gschwandl, T. J., Weniger, T. M., Antretter, T., Künstner, D., Scheriau, S. & Daves, W., Jun 2023, In: Metals. 13.2023, 6, 18 p., 1089.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Residual Stress Evolution in Low-Alloyed Steel at Three Different Length Scales

    Leitner, S., Winter, G., Klarner, J., Antretter, T. & Ecker, W., 23 Mar 2023, In: Materials. 16.2023, 7, 17 p., 2568.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    On the road towards understanding squats: residual stress state of rails

    Gschwandl, T. J., Daves, W., Antretter, T., Bucher, C. & Künstner, D., 2023, In: Procedia Structural Integrity. 46, p. 17-23 7 p.

    Research output: Contribution to journal › Conference article › peer-review

  23. Published

    Prozessoptimierung mittels multiphysikalischer Modellierung des Widerstandspunktschweißens

    Prabitz, K., Antretter, T., Schubert, H., Hilpert, B., Gruber, M., Sierlinger, R., Polcik, P. & Ecker, W., 2023, XLI. Verformungskundliches Kolloquium.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Simulation of the mechanical response of the individual intermetallic phases in multi-phase γ titanium aluminides

    Seligmann, B., Spörk-Erdely, P. & Antretter, T., 2023.

    Research output: Contribution to conference › Poster › Research

  25. 2022
  26. Published

    A Technology-Enhanced ‘Assessment System for Teaching and Assessment using a Computer Algebra Kernel’ (STACK): The Best Contributions of 2022’s STACK Community Meeting at the Montanuniversitaet Leoben, Austria

    Orthaber, M. & Antretter, T., 8 Dec 2022, In: International journal emerging technologies in learning : iJET. 17.2022, 23, p. 4-6 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Towards virtually optimized curing cycles for polymeric encapsulations in microelectronics

    Schipfer, C., Gschwandl, M., Fuchs, P., Antretter, T., Feuchter, M., Morak, M., Tao, Q. & Schingale, A., Dec 2022, In: Microelectronics Reliability. 139.2022, December, 9 p., 114799.

    Research output: Contribution to journal › Article › Research › peer-review

  28. E-pub ahead of print

    Towards electro-thermo-mechanical lifetime assessment for arbitrary power electronics

    Gschwandl, M., Friedrich, B. E., Pfost, M., Antretter, T., Fuchs, P. F., Mitev, I., Tao, Q. & Schingale, A., 4 May 2022, (E-pub ahead of print) In: Microelectronics Reliability. 133.2022, June, 9 p., 114537.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Characterization and modeling of a typical curing material for photoresist films

    Peng, C., Morak, M., Thalhamer, A., Gschwandl, M., Fuchs, P., Tao, Q., Krivec, T., Antretter, T. & Celigueta, M. A., 2022, 2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2022. Institute of Electrical and Electronics Engineers, (2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2022).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. 2021
  31. Published

    Liquid Metal Embrittlement of Advanced High Strength Steel: Experiments and damage modeling

    Prabitz, K., Asadzadeh, M. Z., Pichler, M., Antretter, T., Beal, C., Schubert, H., Hilpert, B., Gruber, M., Sierlinger, R. & Ecker, W., 21 Sept 2021, In: Materials. 14.2021, 18, 15 p., 5451.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Validated multi-physical finite element modelling of the spot welding process of the advanced high strength steel dp1200hd

    Prabitz, K., Pichler, M., Antretter, T., Schubert, H., Hilpert, B., Gruber, M., Sierlinger, R. & Ecker, W., 18 Sept 2021, In: Materials. 14.2021, 18, 19 p., 5411.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Ductile failure modelling in pre-cracked solids using coupled fracture locus theory

    Baltic, S., Magnien, J., Kolitsch, S., Gänser, H.-P., Antretter, T. & Hammer, R., Jul 2021, In: Engineering Fracture Mechanics. 252.2021, July, 13 p., 107845.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    MUL 4.0 – Digitalisierung der Wertschöpfungskette vom Rohmaterial bis hin zum Recycling

    Woschank, M., Ralph, B. J., Kaiblinger, A., Miklautsch, P., Pacher, C., Sorger, M., Zsifkovits, H., Stockinger, M., Pogatscher, S., Antretter, T. & Antrekowitsch, H., 2 Jun 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 166, 6, p. 309-313

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Evaluation of Cement-Casing & Cement-Rock Bond Integrity during Well Operations.

    Lamik, A., Thonhauser, G., Ravi, K., Prohaska-Marchried, M., Pittino, G. & Antretter, T., 27 May 2021, p. 1-13. 13 p.

    Research output: Contribution to conference › Paper › peer-review

  36. Published

    Machine learning assisted calibration of a ductile fracture locus model

    Baltic, S., Asadzadeh, M. Z., Hammer, P., Magnien, J., Gänser, H. P., Antretter, T. & Hammer, R., May 2021, In: Materials and Design. 203.2021, May, 15 p., 109604.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Electro-Thermo-Mechanical Reliability Assessment of Arbitrary Power Electronics

    Gschwandl, M., Pfost, M., Antretter, T., Fuchs, P. F., Mitev, I., Tao, Q. & Schingale, A., 19 Apr 2021, 2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021. Institute of Electrical and Electronics Engineers, 9410862. (2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Prediction of Curing Induced Residual Stresses in Polymeric Encapsulation Materials for Microelectronics

    Schipfer, C., Gschwandl, M., Fuchs, P., Antretter, T., Feuchter, M., Morak, M., Tao, Q. & Schingale, A., 19 Apr 2021, 2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021. Institute of Electrical and Electronics Engineers, 9410855. (2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Analysis of shape, orientation and interface properties of Mo2C precipitates in Fe using ab-initio and finite element method calculations

    Leitner, S., Scheiber, D., Dengg, T., Spitaler, J., Antretter, T. & Ecker, W., 1 Feb 2021, In: Acta materialia. 204.2021, 1 February, 11 p., 116478.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Thermal and Moisture Dependent Material Characterization and Modeling of Glass Fibre Reinforced Epoxy Laminates

    Yalagach, M., Fuchs, P., Antretter, T., Feuchter, M., Tao, Q. & Weber, M., 29 Jan 2021, In: Sensors & transducers. 248.2021, 1, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. 2020
  42. Published

    Numerical analysis of a MEMS sensor's deformation behavior considering dynamic moisture conditions

    Yalagach, M., Fuchs, P. F., Antretter, T., Qi, T. & Weber, M., 2 Dec 2020, 2020 IEEE 22nd Electronics Packaging Technology Conference, EPTC 2020. Institute of Electrical and Electronics Engineers, p. 380-385 6 p. 9315091. (2020 IEEE 22nd Electronics Packaging Technology Conference, EPTC 2020).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Coupled damage variable based on fracture locus: Prediction of ductile failure in a complex structure

    Baltic, S., Magnien, J., Gänser, H.-P., Antretter, T. & Hammer, R., 23 Oct 2020, In: International journal of solids and structures. 207.2020, December, p. 132-144 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Too much to ask for oder Wie ein Moodle Server bei laufender Prüfung in die Knie gezwungen wird

    Orthaber, M. & Antretter, T., 8 Oct 2020, <fnma> Magazin 03|2020. Graz, Vol. 03/2020.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Education

  45. Published

    EXAM-ON-DEMAND: SCHRIFTLICHE ONLINE-PRÜFUNGEN ALS ANTWORT AUF DEN LOCKDOWN

    Orthaber, M. & Antretter, T., 31 Jul 2020, fnma Magazin 02/2020 - E-Assessment und E-Examinations . Graz, Vol. 02/2020. p. 47 - 49 3 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Education

  46. Published

    Concepts for E-Assessments in STEM on the Example of Engineering Mechanics: How to Assess Complex EngineeringProblemsElectronically

    Orthaber, M., Stütz, D., Antretter, T. & Ebner, M., 26 Jun 2020, In: International journal emerging technologies in learning : iJET. 15.2020, 12, p. 136-152 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Model-Based Residual Stress Design in Multiphase Seamless Steel Tubes

    Leitner, S., Winter, G., Klarner, J., Antretter, T. & Ecker, W., 16 Jan 2020, In: Materials. 13.2020, 2, 12 p., 439.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Dilatometer experiments to determine the phase transformation kinetics and TRIP behavior for predeformed 20MnB8 steel sheets

    Tomasch, M., Ecker, W., Antretter, T. & Stockinger, M. (Publisher), 2020, XXXIX. Verformungskundliches Kolloquium, Tagungsband. Vol. 39. p. 72-77

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. 2019
  50. Published

    Coupled damage variable based on fracture locus: Modelling and calibration

    Baltic, S., Magnien, J., Gänser, H.-P., Antretter, T. & Hammer, R., 23 Nov 2019, In: International journal of plasticity. 126.2020, March, 24 p., 102623.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    E-ASSESSMENT IN ENGINEERING MECHANICS: HOW DOES IT COMPARE TO CLASSICAL PAPER-PENCIL EXAMS?

    Orthaber, M., Antretter, T., Jurisits, R. & Schemmel, M., 11 Nov 2019, 12TH INTERNATIONAL CONFERENCE OF EDUCATION, RESEARCH AND INNOVATION (ICERI2019). p. 9381-9390

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Thermodynamic and mechanical stability of Ni3X-type intermetallic compounds

    Kulo, N., He, S., Ecker, W., Pippan, R., Antretter, T. & Razumovskiy, V. I., Nov 2019, In: Intermetallics. 114.2019, November, 9 p., 106604.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Unifcation of the non-linear geometric transformation theory of martensite and crystal plasticity - Application to dislocated lath martensite in steels

    Petersmann, M., Antretter, T., Cailletaud, G., Sannikov, A., Ehlenbröker, U. & Fischer, F.-D., Aug 2019, In: International journal of plasticity. 119.2019, August, p. 140-155 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    The Effect of Loading during Martensitic Transformation of a Margaging Steel after Prior Austenite Grain Size Refinement by Thermal Cycling

    Petersmann, M., Antretter, T., Sannikov, A., Sartory, B. & Ehlenbröker, U., 30 May 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 6, p. 360-372 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Numerical analysis of the influence of polymeric materials on a MEMS package performance under humidity and temperature loads

    Yalagach, M., Filipp Fuchs, P., Wolfberger, A., Gschwandl, M., Antretter, T., Feuchter, M., Tak, C. & Tao, Q., 1 May 2019, Proceedings - IEEE 69th Electronic Components and Technology Conference, ECTC 2019. Institute of Electrical and Electronics Engineers, p. 2029-2035 7 p. 8811123. (2019 IEEE 69TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC)).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Evaluation of Digital Image Correlation Techniques for the Determination of Coefficients of Thermal Expansion for Thin Reinforced Polymers

    Gschwandl, M., Frewein, M., Fuchs, P. F., Antretter, T., Pinter, G. & Novak, P., 5 Mar 2019, EMAP 2018 - 2018 20th International Conference on Electronic Materials and Packaging. Institute of Electrical and Electronics Engineers, 8660763. (EMAP 2018 - 2018 20th International Conference on Electronic Materials and Packaging).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Deformation-induced phase transformation in a Co-Cr-W-Mo alloy studied by high-energy X-ray diffraction during in-situ compression tests

    Weißensteiner, I., Petersmann, M., Erdely, P., Stark, A., Antretter, T., Clemens, H. & Maier-Kiener, V., Feb 2019, In: Acta materialia. 164.2019, February, p. 272-282 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    A Sequential Finite Volume Method / Finite Element Analysis of a Power Electronic Semiconductor Chip

    Gschwandl, M., Fuchs, P. F., Antretter, T., Pfost, M., Mitev, I., Tao, Q., Krivec, T., Schingale, A. & Decker, M., 2019, p. 1509-1514.

    Research output: Contribution to conference › Paper › peer-review

  59. Published

    Cyclic heat-up and damage-relevant substrate plastification of single- and bilayer coated milling inserts evaluated numerically

    Nemetz, A., Daves, W., Klünsner, T., Ecker, W., Schäfer, J., Czettl, C. & Antretter, T., 2019, In: Surface & coatings technology. 360.2019, February, p. 39-49 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Residual stress and microstructure evolution in steel tubes for different cooling conditions – Simulation and verification

    Brunbauer, S., Winter, G., Antretter, T., Staron, P. & Ecker, W., 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 747, p. 73-79

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Shot peening-induced plastic deformation of individual phases within a coated WC-Co hard metal composite material including WC plastification

    Faksa, L., Daves, W., Klünsner, T., Maier, K., Antretter, T., Czettl, C. & Ecker, W., 2019, In: Surface & coatings technology. 380.2019, 25 December, 11 p., 125026.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Simulation of Phase Transformation and Material Plasticity for Press Hardening

    Tomasch, M., Ecker, W. & Antretter, T., 2019, Proceedings of NUMIFORM 2019: the 13th International Conference on Numerical Methods in Industrial Forming Processes. p. 362-365

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. 2018
  64. Published

    Crack arrest in thin metallic film stacks due to material- and residual stress inhomogeneities

    Kozic, D., Gänser, H.-P., Brunner, R., Kiener, D., Antretter, T. & Kolednik, O., 31 Dec 2018, In: Thin solid films. p. 14-22 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Influence of environmental factors like temperature and humidity on MEMS packaging materials.

    Yalagach, M., Fuchs, P. F., Mitev, I., Antretter, T., Feuchter, M., Wolfberger, A. & Qi, T., 26 Nov 2018, 2018 7th Electronic System-Integration Technology Conference, ESTC 2018 - Proceedings. Institute of Electrical and Electronics Engineers, 8546484

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    The effect of loading during martensitic transformation of a maraging steel after prior austenite grain size refinement by thermal cycling

    Petersmann, M., Antretter, T. & Sannikov, A., 19 Sept 2018, Sonderbände der Praktischen Metallographie Band 52. p. 207-212 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Sucker Rod String Design Optimization Using an Innovative Finite Element Simulation Approach

    Langbauer, C., Antretter, T. & Hofstätter, H., 1 Sept 2018, In: Oil gas European magazine. 44.2018, III, p. 126-132 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Modelling blast fragmentation of cylinders of mortar and rock

    Iravani, A., Kukolj, I., Ouchterlony, F., Antretter, T. & Åström, J., Jun 2018, Fragblast 12: 12th International Symposium on Rock Fragmentation by Blasting. Schunnesson, H. & Johansson, D. (eds.). Luleå: Luleå Univ. of Technology, p. 597-610 15 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Sucker Rod String Design Optimization using an Innovative Finite Elements Simulation Approach

    Langbauer, C., Hofstätter, H. & Antretter, T., 24 Apr 2018, NAFEMS Nordic Tagungsband 2018. p. 71-73

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Sucker Rod String Design Optimization using an Innovative Finite Elements Simulation Approach

    Langbauer, C., Hofstätter, H. & Antretter, T., 19 Apr 2018, DGMK Tagungsbericht 2018. p. 227 237 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Deep drawing of press hardening steels

    Tomasch, M., Ecker, W., Kaiser, R. & Antretter, T., 2018, Journal of Physics: Conference Series. IOP Publishing Ltd., Vol. 1063. 012038

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Evaluation of Digital Image Correlation Techniques for the Determination of Coefficients of Thermal Expansion for Thin Reinforced Polymers

    Gschwandl, M., Frewein, M., Fuchs, P. F., Antretter, T., Pinter, G. G. & Novàk, P., 2018.

    Research output: Contribution to conference › Poster › Research

  73. Published

    Evaluation of Digital Image Correlation Techniques for the Determination of Coefficients of Thermal Expansion for Thin Reinforced Polymers

    Gschwandl, M., Frewein, M., Fuchs, P. F., Antretter, T., Pinter, G. G. & Novàk, P., 2018, EMAP 2018 Conference Proceedings. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Gradient polymer composites for optimum heat dissipation

    Marx, P., Morak, M., Gschwandl, M., Fuchs, P., Antretter, T., Pfost, M., Kern, W. & Wiesbrock, F., 2018, In: Journal of the American Chemical Society. 2, 1 p., PMSE-772.

    Research output: Contribution to journal › Meeting Abstract

  75. Published

    Model Free Kinetics coupled with Finite Element Method for curing simulation of thermosetting epoxy resins

    Tao, Q., Pinter, G. G., Antretter, T., Krivec, T. & Fuchs, P., 2018, In: Journal of Applied Polymer Science. p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Modeling Dry Wear of Piston Rod Sealing Elements of Reciprocating Compressors Considering Gas Pressure Drop Across the Dynamic Sealing Surface

    Kaufmann, A., Lindner-Silwester, T. & Antretter, T., 2018, In: Journal of tribology (Transactions of the ASME).

    Research output: Contribution to journal › Article › Research › peer-review

  77. 2017
  78. Published

    Finite Element Based Optimization and Improvement of the Sucker Rod Pumping System

    Langbauer, C. & Antretter, T., 16 Nov 2017. 18 p.

    Research output: Contribution to conference › Paper › peer-review

  79. Published

    Prediction and Characterization of Residual Stresses after Heat Treatment of Massive Hot Work Tool Steel Components

    Schemmel, M., Antretter, T., Ecker, W. & Prevedel, P., 19 Apr 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  80. Published

    Porenschließverhalten beim mehrdirektionalen und mehrstufigen Freiformschmieden

    Kaiser, R., Tewes, A., Wieser, V. & Antretter, T., 18 Mar 2017, XXXVI. Verformungskundliches Kolloquium: Zauchensee von 18.3 bis 22.3.2017. Leoben: Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 134 - 139 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Modeling the interplay between transformation and plasticity in low-carbon steels - A micro-level constitutive model / RVE approach

    Petersmann, M., Antretter, T., Ehlenbröcker, U. & Cailletaud, G., 27 Feb 2017.

    Research output: Contribution to conference › Poster › Research

  82. Published

    A new approach predicting the evolution of laminated nanostructures - Martensite in NiTi as an example

    Petersmann, M., Antretter, T., Waitz, T. & Fischer, F. D., 14 Feb 2017, In: Modelling and simulation in materials science and engineering. 25.2017, February, 17 p., 035004.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    An Energy Approach to Determine the Martensite Morphology in Nanocrystalline NiTi

    Petersmann, M., Pranger, W., Waitz, T. & Antretter, T., 31 Jan 2017, In: Advanced engineering materials. 19.2017, 4, 6 p., 1600684.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Experimental and computational approach to evaluate the effect of leveling on the change of tensile properites of heavy steel plates

    Kaltenbrunner, T., Ecker, W., Antretter, T., Kaiser, R., Parteder, E. & Egger, R., 2017, AIP Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Numerical analysis of the rock cutting process based on a two-parameter description of tensile strength

    Pittino, G., Galler, R., Antretter, T., Mikl-Resch, M. J., Tichy, R., Ecker, W., Gimpel, M. & Kargl, H., 2017, Proceedings of 13th ISRM International Congress of Rock Mechanics 2015. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Numerical simulation of stress-free shotcrete installation in the underground structures using finite element program ABAQUS

    Darmaev, E., Galler, R. & Antretter, T., 2017, Proceedings of the IV International Conference on Computational Methods in Tunneling and Subsurface Engineering: EURO:TUN 2017. Innsbruck, p. 339-346 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    Numerical study of the influence of irradiation parameters on the microwave-induced stresses in granite

    Toifl, M., Hartlieb, P., Meisels, R., Antretter, T. & Kuchar, F., 2017, In: Minerals engineering. 103-104.2017, April, p. 78-92 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    On Variants, Blocks and Packets and their Interaction with Crystal Plasticity

    Antretter, T., Petersmann, M., Cailletaud, G., Ehlenbröcker, U. & Vieweg, A., 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  89. 2016
  90. E-pub ahead of print

    Extracting flow curves from nano-sized metal layers in thin film systems

    Kozic, D., Maier-Kiener, V., Konetschnik, R., Gänser, H.-P., Antretter, T., Brunner, R. & Kiener, D., 7 Dec 2016, (E-pub ahead of print) In: Scripta materialia. 130.2017, 15 March, p. 143-147 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    A Mean-Field Model for TRIP - Algorithms and Parameter Identification

    Petersmann, M. & Antretter, T., 24 Aug 2016.

    Research output: Contribution to conference › Poster › Research

  92. E-pub ahead of print

    New approach for the simulation of chain drive dynamics with consideration of the elastic environment

    Grinschgl, M., Reich, F. M., Abeltshauser, R., Eder, M. & Antretter, T., 5 May 2016, (E-pub ahead of print) In: Proceedings of the Institution of Mechanical Engineers Engineers, Part K, Journal of multi-body dynamics. 231.2017, 3, p. 103-120 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Numerical study of the influence of irradiation parameters on the microwave-induced stresses in granite for industrial applications

    Toifl, M., Hartlieb, P., Meisels, R., Antretter, T. & Kuchar, F., 11 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  94. Published

    Numerical study of the influence of irradiation parameters on the microwave-induced stresses in granite for industrial applications

    Toifl, M., Hartlieb, P., Meisels, R., Antretter, T. & Kuchar, F., 11 Apr 2016, Comminution '16 - Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Eigenspannungsoptimiertes Richtkonzept: Anwendung auf Langprodukte

    Kaiser, R., Antretter, T. & Buchmayr, B., 5 Mar 2016, Tagungsgband XXXV. Verformungskundliches Kolloquium 2016: Tagungsband. Buchmayr, B. (ed.). Leoben: Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 153-159 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. E-pub ahead of print

    3D numerical study on microwave induced stresses in inhomogeneous hard rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 18 Jan 2016, (E-pub ahead of print) In: Minerals engineering. 90.2016, May, p. 29-42 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Calculation of crack driving Forces of surface cracks subjected to rolling/sliding contact

    Krácalik, M., Daves, W. & Antretter, T., 2016, In: Engineering Fracture Mechanics. 152, 2, p. 10-25

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Experimental and theoretical evidence of displacive martensite in an intermetallic Mo-containing Ƴ-TiAl based alloy

    Mayer, S., Petersmann, M., Fischer, F. D., Clemens, H., Waitz, T. & Antretter, T., 2016, In: Acta materialia. 115, p. 242-249 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Finite element analysis of arbitrarily complex electronics devices

    Gschwandl, M., Fuchs, P., Fellner, K., Antretter, T., Krivec, T. & Tao, Q., 2016, Proceedings of the 18th Electronics Packaging Technology Conference EPTC2016. p. 497-500

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Fracture and Material Behavior of Thin Film composites

    Kozic, D., Konetschnik, R., Maier-Kiener, V., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2016, 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) . Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Free edges at bilayered compounds - a short analytical and numerical reconsideration

    Antretter, T., Fischer, F. D., Rammerstorfer, F. G. & Zickler, G. A., 2016, In: Archive of applied mechanics. 86, p. 2053-2061

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Influence of the levelling process on the mechanical properties of heavy steel plates

    Kaltenbrunner, T., Antretter, T., Ecker, W., Kaiser, R., Gänser, H.-P. & Parteder, E., 2016, Proceedings of Rolling '16.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Modeling of variant-interaction during bainitic phase transformation

    Ehlenbröker, U., Mahnken, R., Petersmann, M. & Antretter, T., 2016, IOP Conference Series Materials Science and Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    Numerical simulation of the electrical performance of printed circuit boards under cyclic thermal loads

    Fellner, K., Antretter, T., Fuchs, P. F. & Tao, Q., 2016, In: Microelectronics Reliability. p. 148-155

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Stress Relaxation by Power-Law Creep During Growth of a Misfitting Precipitate

    Fischer, F. D., Svoboda, J., Antretter, T. & Kozeschnik, E., 2016, In: International journal of solids and structures. 96, p. 74-80

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Thermo-physical properties of selected hard rocks and their relation to microwave-assisted comminution

    Hartlieb, P., Toifl, M., Kuchar, F., Meisels, R. & Antretter, T., 2016, In: Minerals engineering. 91.2016, p. 34 - 41 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  107. 2015
  108. E-pub ahead of print

    Cyclic mechanical behavior of thin layers of copper: A theoretical and numerical study

    Fellner, K., Antretter, T., Fuchs, P. & Pelisset, T. M. A., 8 Dec 2015, (E-pub ahead of print) In: The Journal of Strain Analysis for Engineering Design. 51.2016, 2, p. 1-9 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  109. Published

    Special cases of martensite compatibility: A near single-variant habit-plane and the martensite of nanocrystalline NiTi

    Petersmann, M. & Antretter, T., 1 Dec 2015, MATEC Web of Conferences : ESOMAT 2015 – 10th European Symposium on Martensitic Transformations . Schryvers, N. & Van Humbeeck, J. (eds.). 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  110. Published

    Crystallographic aspects of phase transformations in intermetallics and steels

    Petersmann, M., Antretter, T. & Ehlenbröcker, U., 4 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  111. Published

    Modelling of Precipitation in High Strength Creep Resistant Steels

    Antretter, T., Fischer, F. D., Kozeschnik, E. & Svoboda, J., 10 Aug 2015.

    Research output: Contribution to conference › Presentation › Research

  112. Published

    An inverse finite element approach to calculate full-field forming strains

    Ritt, R., Machado, M., Fischlschweiger, M., Major, Z. & Antretter, T., Jul 2015, Key engineering materials. Vol. 651-653.2015. p. 363-368 6 p. (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  113. Published

    The relation of temperature, microwave absorbing properties and thermo - dynamic behavior of selected hard rocks

    Hartlieb, P., Toifl, M., Meisels, R., Antretter, T. & Kuchar, F., 11 Jun 2015, Physical Separation 15 - Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  114. Published

    The relation of temperature, microwave absorbing properties and thermo-dynamic properties of selected hard rocks

    Hartlieb, P., Toifl, M., Meisels, R., Antretter, T. & Kuchar, F., 11 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  115. Published

    NUMERICAL ANALYSIS OF THE ROCK CUTTING PROCESS BASED ON A TWO PARAMETER DESCRIPTION OF TENSILE STRENGTH USING THE WEIBULL THEORY

    Mikl-Resch, M. J., Tichy, R., Antretter, T., Pittino, G., Galler, R., Ecker, W., Gimpel, M. & Kargl, H., 13 May 2015. 5 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  116. Published

    NUMERICAL ANALYSIS OF THE ROCK CUTTING PROCESS BASED ON A TWO PARAMETER DESCRIPTION OF TENSILE STRENGTH USING THE WEIBULL THEORY

    Mikl-Resch, M. J., Antretter, T., Tichy, R., Pittino, G., Galler, R., Ecker, W., Gimpel, M. & Kargl, H., 10 May 2015, ISRM 2015_PROCEEDINGS. 5 p. 724

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  117. Published

    NUMERICAL ANALYSIS OF THE ROCK CUTTING PROCESS BASED ON A TWO PARAMETER DESCRIPTION OF TENSILE STRENGTH USING THE WEIBULL THEORY

    Mikl-Resch, M. J., Antretter, T., Tichy, R., Pittino, G., Galler, R., Ecker, W., Gimpel, M. & Kargl, H., 10 May 2015. 5 p.

    Research output: Contribution to conference › Poster › Research

  118. Published

    Fracture mechanics of thin film systems on the sub-micron scale

    Kozic, D., Treml, R., Schongrundner, R., Brunner, R., Kiener, D., Zechner, J., Antretter, T. & Ganser, H. P., 6 May 2015, 2015 16th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2015. Institute of Electrical and Electronics Engineers, 7103088

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  119. Published

    Comparison of Different Methods for Stress and Deflection Analysis in Embedded die Packages during the Assembly Process

    Macurova, K., Bermejo, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 1 Apr 2015, In: Journal of Microelectronics and Electronic Packaging. 12.2015, 2, p. 80-85 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  120. Published

    3D numerical study on microwave induced stresses in inhomogeneous hard rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015.

    Research output: Contribution to conference › Presentation › Research

  121. Published

    3D numerical study on microwave induced stresses in inhomogeneous hard rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015.

    Research output: Contribution to conference › Paper

  122. Published

    Experimental characterization and modelling of triaxial residual stresses in straightened railway rails

    Kaiser, R., Stefenelli, M., Hatzenbichler, T., Antretter, T., Hofmann, M., Keckes, J. & Buchmayr, B., 2015, In: The Journal of Strain Analysis for Engineering Design. 50, 3, p. 190-198 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  123. Published

    Influence of the microstructure on rock damage during microwave irradiation: a 3D numerical analysis

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015, Proceedings of Eurock 2015. Schubert, W. & Kluckner, A. (eds.). p. 731-736

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  124. Published

    Influence of the microstructure on rock damage during microwave irradiation: A 3D numerical analysis

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015, Future Development of Rock Mechanics: Proceedings of the SRM Regional Symposium EUROCK 2015 & 64th Geomechanics Colloquium. Schubert, W. & Kluckner, A. (eds.). Salzburg: Österreichische Gesellschaft für Geomechanik, p. 731-736

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  125. Published

    Influence of the microstructure on rock damage during microwave irradiation: A 3D numerical analysis

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  126. Published

    Microwave absorption and its thermo-mechanical consequences in heterogeneous rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015, Geomechanics from Micro to Macro - Proceedings of the TC105 ISSMGE International Symposium on Geomechanics from Micro to Macro, IS-Cambridge 2014. Vol. 2. p. 1545-1550 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  127. Published

    Microwave propagation and absorption and its thermo-mechanical consequences in heterogeneous rocks

    Meisels, R., Toifl, M., Hartlieb, P., Antretter, T. & Kuchar, F., 2015, In: International Journal of Mineral Processing. 135, p. 40-51

    Research output: Contribution to journal › Article › Research › peer-review

  128. Published

    Multi-scale modeling of bainitic phase transformation in multi-variant polycrystalline low alloy steels

    Mahnken, R., Schneidt, A., Antretter, T., Ehlenbröker, U. & Wolff, M., 2015, In: International journal of solids and structures. 54, p. 156-171

    Research output: Contribution to journal › Article › Research › peer-review

  129. Published

    Numerical calibration of a yield limit function for rock materials by means of the Brazilian test and the uniaxial compression test

    Mikl-Resch, M. J., Antretter, T., Gimpel, M., Kargl, H., Pittino, G., Tichy, R., Ecker, W. & Galler, R., 2015, In: International Journal of Rock Mechanics and Mining Sciences. 74, p. 24-29

    Research output: Contribution to journal › Article › Research › peer-review

  130. Published

    Relaxation of a Precipitate Misfit Stress State by Creep in the Matrix

    Fischer, F. D., Svoboda, J., Antretter, T. & Kozeschnik, E., 2015, In: International journal of plasticity. 64, p. 164-176

    Research output: Contribution to journal › Article › Research › peer-review

  131. Published

    Simulation des thermomechanischen Verhaltens von Grobblechen während der Schnellkühlung

    Eßl, W., Antretter, T. & Parteder, E., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  132. Published

    Size effects in residual stress formation during quenching of cylinders made of hot-work tool steel

    Schemmel, M., Prevedel, P., Schöngrundner, R., Ecker, W. & Antretter, T., 2015, In: Advances in Materials Science and Engineering. 7 p., 678056.

    Research output: Contribution to journal › Article › Research › peer-review

  133. Published

    Stress and Deflection Development During Die Embedding into Printed Circuit Boards

    Macurova, K., Angerer, P., Bermejo, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 2015, In: Materials Today: Proceedings. 2, 2, p. 4196-4205 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  134. Published

    The rock cutting process of road headers - Overview of laboratory tests and numerical simulation

    Pittino, G., Galler, R., Mikl-Resch, M. J., Tichy, R., Ecker, W., Antretter, T., Gimpel, M. & Kargl, H., 2015, Future Development of Rock Mechanics: Proceedings of the ISRM Regional Symposium Eurock 2015 & 64th Geomechanics Colloquium. Schubert, W. & Kluckner, A. (eds.). Salzburg: Eigenverlag, p. 243-248 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  135. 2014
  136. Published

    The role of phase interface energy in martensitic transformation: A lattice Monte-Carlo simulation

    Yastrebov, V. A., Fischlschweiger, M., Cailletaud, G. & Antretter, T., Mar 2014, In: Mechanics Research Communications. 56, p. 37-41

    Research output: Contribution to journal › Article › Research › peer-review

  137. Published

    Comparison of different methods for stress and deflection analysis in embedded die packages during the assembly process

    Macurova, K., Bermejo Moratinos, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 1 Jan 2014, Proceedings - 2014 47th International Symposium on Microelectronics, IMAPS 2014. p. 355-360 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  138. Published

    Characterization and modeling of the AuSnCu thin solder joint under thermal cycling

    Pélisset, T., Karunamurthy, B., Otremba, R. & Antretter, T., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  139. Published

    Characterization and modeling of the AuSnCu thin solder joint under thermal cycling

    Antretter, T., Otremba, R., Karunamurthy, B. & Pélisset, T., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  140. Published

    Critical assessment of the determination of residual stress profiles in thin films by means of the ion beam layer removal method

    Schöngrundner, R., Treml, R., Antretter, T., Kozic, D., Ecker, W. & Kiener, D., 2014, In: Thin solid films. p. 321-330

    Research output: Contribution to journal › Article › Research › peer-review

  141. Published

    Determination of cyclic mechanical properties of thin copper layers for PCB applications

    Fellner, K., Fuchs, P. F., Antretter, T., Pinter, G. & Schöngrundner, R., 2014, Proceedings 15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  142. Published

    Evaluation of the residual stress distribution in thin films by means of the ion beam layer removal method

    Kozic, D., Treml, R., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014. Zhang, G. Q., Van Driel, W. D., Rodgers, P., Bailey, C. & de Saint Leger, O. (eds.). Institute of Electrical and Electronics Engineers, 6813785

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  143. Published

    Festigkeitsskalierung nach Weibull

    Pittino, G., Tichy, R., Galler, R., Antretter, T., Ecker, W., Gimpel, M. & Kargl, H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  144. Published

    Method development for the cyclic characterization of thin copper layers for PCB applications

    Fellner, K., Fuchs, P. F., Pinter, G., Antretter, T. & Krivec, T., 2014, In: Circuit World. 40, p. 53-60

    Research output: Contribution to journal › Article › Research › peer-review

  145. Published

    Microwave absorption and its thermo-mechanical consequences in heterogeneous rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  146. Published

    Microwave absorption and its thermo-mechanical consequences in heterogeneous rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2014, Geomechanics from Micro to Macro. p. 1545-1550

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  147. Published

    Modelling of phase transformations and residual stress formation in hot-work tool steel components

    Schemmel, M., Prevedel, P., Schöngrundner, R., Ecker, W. & Antretter, T., 2014, European Conference of Heat Treatment and 21st IFHTSE Congress. p. 285-292

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  148. Published

    Residual Stress Investigations in Thin Film Systems: Experiment and Simulation

    Kozic, D., Treml, R., Sartory, B., Schöngrundner, R., Kiener, D., Antretter, T., Gänser, H.-P. & Brunner, R., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  149. Published

    Simulation of stress distribution in assembled silicon dies and deflection of printed circuit boards

    Macurova, K., Angerer, P., Antretter, T., Bermejo Moratinos, R., Maia, W., Schöngrundner, R., Krivec, T., Morianz, M. & Brizoux, M., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  150. Published

    Simulation of the roller straightening process with respect to residual stresses and the curvature trend

    Kaiser, R., Hatzenbichler, T., Buchmayr, B. & Antretter, T., 2014, International Conference on Residual Stresses 9 (ICRS 9). p. 456-463

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  151. 2013
  152. Published

    Multi-physics simulation of the component attachment within embedding process

    Macurova, K., Kharicha, A., Pletz, M., Mataln, M., Bermejo, R., Schongrundner, R., Krivec, T., Antretter, T., Maia, W., Morianz, M. & Brizoux, M., 1 Apr 2013, 14th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2013. Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  153. Published

    An Efficient Algorithm for Modeling the Thermo-Mechanical Material Response of Havy Steel Plates during Accelerated Cooling

    Eßl, W., Antretter, T. & Parteder, E., 2013, Key engineering materials. Vol. 554-557. p. 749-763 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  154. Published

    Determination of Uniaxial Tensile Strength of Rock Materials with Numerical Methods

    Mikl, M., Antretter, T., Gimpel, M. & Pittino, G., 2013, Proceedings of The Third International Conference on Computational Methods in Tunneling and Subsurface Engineering. p. 457-464

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  155. Published

    Development and testing of a technique for the simulation of the rock cutting process

    Mikl, M. J., Tichy, R., Ecker, W., Antretter, T. & Pittino, G., 2013, Proceedings of Research and Applications in Structural Engineering, Mechanics and Computation. p. 505-510 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  156. Published

    Development and testing of a technique fort he simulation oft he rock cutting process

    Mikl, M., Tichy, R., Ecker, W., Antretter, T. & Pittino, G., 2013, Research and Applications in Structural Engineering, Mechanics and Computation. p. 505-510

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  157. Published

    Entwicklung und Test einer Methode zur Simulation des Gesteinsschneidens mit der Finiten Elemente Methode

    Mikl, M. J., Tichy, R., Ecker, W., Antretter, T., Gimpel, M., Kargl, H., Pittino, G. & Galler, R., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 507-513

    Research output: Contribution to journal › Article › Research › peer-review

  158. Published

    Maximum Dissipation Crystal Plasticity - an approach to select active slip systems

    Orthaber, M., Antretter, T. & Gänser, H.-P., 2013, CM13: Proceedings of the International Conference on Computational Mechanics. p. ---

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  159. Published

    Numerical Simulations in the field of Geotechnics and Underground Engineering - Examples of Research and Development Projects

    Galler, R., Volderauer, C., Marcher, T., Kargl, H., Gimpel, M., Mikl, M., Ecker, W., Tichy, R., Antretter, T., Gschwandtner, G., Pittino, G., Entacher, M., Lorenz, S., Schuller, E. & Mödlhammer, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 189-197

    Research output: Contribution to journal › Article › Research › peer-review

  160. Published

    On the selection of active slip systems in rate independent crystal plasticity

    Orthaber, M., Antretter, T. & Gänser, H.-P., 2013, Key engineering materials. Vol. 554-557. p. 1147-1156 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  161. Published

    Some Examples for Advanced Numerical Solutions Pushing the Limits of Commercial Software

    Antretter, T., Hasenhütl, E., Eßl, W., Hofmann, A., Ecker, W., Heiss, C., Galler, R. & Parteder, E., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 211-214

    Research output: Contribution to journal › Article › Research › peer-review

  162. Published

    Transformation hardening and kinetics for stress assisted and temperature driven transformation in steels

    Fischlschweiger, M., Antretter, T. & Cailletaud, G., 2013, In: Mechanics Research Communications. 47, p. 84-88

    Research output: Contribution to journal › Article › Research › peer-review

  163. 2012
  164. Published

    Active slip systems in crystal plasticity and the principle of maximum dissipation

    Orthaber, M., Antretter, T., Gänser, H.-P. & Ecker, W., 2012, Proceeding of the 5th International Conference from Scientific Computing to Computational Engineering. p. 36-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  165. Published

    A mean-field model for transformation induced plasticity including backstress effects for non-proportional loadings

    Fischlschweiger, M., Cailletaud, G. & Antretter, T., 2012, In: International journal of plasticity. p. 53-71

    Research output: Contribution to journal › Article › Research › peer-review

  166. Published

    Caloric Effects in Ferroic Materials: New Concepts for Cooling: Projektantrag; Theoretical, Experimental, Basic - Fundamental (Grundlagenforschung)

    Antretter, T. (Reviewer), 2012, 180 p. Dresden

    Research output: Other contribution › Transfer › peer-review

  167. Published

    Convergence tests - Influence of modelling on the dynamic vibration behaviour of coaches

    Böhler, E., Antretter, T., Magerl, F. & Rosenberger, M., 2012, Generation and Propagation of Sound in Solids and Fluids - Modern Analysis Methods in Acoustics. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  168. Published

    Crystal orientation changes: a comparison of crystal plasticity finite element study and experimental results

    Rehrl, C., Völker, B., Kleber, S., Antretter, T. & Pippan, R., 2012, In: Acta materialia. p. 2379-2386

    Research output: Contribution to journal › Article › Research › peer-review

  169. Published

    CRYSTAL PLASTICITY AND THE MAXIMUM RATE OF DISSIPATION

    Gänser, H.-P., Antretter, T., Ecker, W. & Orthaber, M., 2012, Book of Abstracts of 10th World Congress on Computational Mechanics. p. 100-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  170. Published

    Crystal Plasticity using the Principle of Maximum Dissipation

    Orthaber, M., Antretter, T. & Ecker, W., 2012, Book of Abstracts of ESMC-2012 - 8th European Solid Mechanics Conference. p. ---

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  171. Published

    Damage of basalt induced by microwave irradiation

    Hartlieb, P., Leindl, M., Kuchar, F., Antretter, T. & Moser, P., 2012, In: Minerals engineering. p. 82-89

    Research output: Contribution to journal › Article › Research › peer-review

  172. Published

    Development of Techniques for Rock Cutting Applications

    Mikl, M., Antretter, T. & Pittino, G., 2012, European Mechanics Society, Book of Abstracts: ESMC-2012 - 8th European Solid Mechanics Conference, Graz, Austria, July 9-13, 2012. Holzapfel, G. A. & Ogden, R. W. (eds.). Graz

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  173. Published

    Einfluss der zyklischen Verformung auf das Phasenumwandlungsverhalten in Heusler Legierungen für magnetokalorische Anwendungen: Auftraggeber: Deutsche Forschungsgesellschaft; Gutachten eines Projektantrags; Theoretical, Experimental, Basic - Fundamental (Grundlagenforschung)

    Antretter, T. (Reviewer), 2012, 20 p.

    Research output: Other contribution › Transfer › peer-review

  174. Published

    Experimental and numerical investigation of damage due to thermo mechanical fatigue of brake disks for railway applications

    Raninger, P., Ecker, W. & Antretter, T., 2012, Proceedings of 3rd Fatigue Symposium. p. 236-247

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  175. Published

    Finite Element Modeling of the Cyclic Wetting Mechanism in the Active Part of Wheat Awns

    Zickler, G., Ruffoni, D., Dunlop, J. W. C., Elbaum, R., Weinkamer, R., Fratzl, P. & Antretter, T., 2012, In: Biointerphases. 7, p. 42-42

    Research output: Contribution to journal › Article › Research › peer-review

  176. Published

    Finite Element Modeling of the Humidity-driven Wetting Mechanism of Wheat Awns

    Zickler, G., Dunlop, J. W. C., Ruffoni, D., Elbaum, R., Weinkamer, R., Fratzl, P. & Antretter, T., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  177. Published

    Finite Element Modeling of the Humidity-driven Wetting Mechanism of Wheat Awns

    Zickler, G., Dunlop, J. W. C., Ruffoni, D., Elbaum, R., Weinkamer, R., Fratzl, P. & Antretter, T., 2012, Proceedings of the 8th European Solid Mechanics Conference. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  178. Published

    Interaction of heat checks in aluminum pressure casting dies and their effect on fatigue life

    Raninger, P., Ecker, W., Antretter, T., Leindl, M. & Ebner, R., 2012, Key engineering materials. Vol. 488-489. p. 626-629 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  179. Published

    Macro-, Meso Scale Modeling of TRIP - Nonlinear Scale Transitions Rules

    Antretter, T., Fischlschweiger, M. & Cailletaud, G., 2012, Non-Linear Response of Conventional & Advanced Materials, and Multi-scale Modeling. p. 97-99

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  180. Published

    Nanostructured shape memory alloys

    Antretter, T., Fischer, F. D., Kompatscher, A. E., Müllner, P., Mangler, C., Peterlechner, M., Steiner, G. & Waitz, T., 2012, Structures and Systems.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  181. Published

    Simulation der Lagerverluste in Großmotoren und deren Validierung

    Antretter, T. (Reviewer), 2012, Graz : Eigenverlag.

    Research output: Other contribution › Transfer › peer-review

  182. Published

    Simulation of the roller straightening process with respect to residual stresses and the curvature trend

    Kaiser, R., Hatzenbichler, T., Buchmayr, B. & Antretter, T., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  183. Published

    Solution of a time-dependent heat conduction problem by an integral-equation approach

    Leindl, M., Oberaigner, E. & Antretter, T., 2012, In: Computational materials science. p. 178-181

    Research output: Contribution to journal › Article › Research › peer-review

  184. Published

    Thermo-Mechanical Behaviour of Dual-Phase Steels in Various Structural Morphologies: Experiments and Modelling

    Buchmayr, B. & Antretter, T., 2012, THERMEC 2011 : International Conference on Processing and Fabrication of Advanced Materials ; processing, fabrication, properties, applications ; August 1 - 5, 2011, Quebec City, Canada . p. 2072-2077 (Materials science forum; vol. 706-709).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  185. Published

    Ultrafine -grained shape memory alloys

    Antretter, T., Fischer, F. D., Kompatscher, A. E., Müllner, P., Mangler, C., Peterlechner, M., Pranger, W., Steiner, G. & Waitz, T., 2012, TMS Annual.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  186. 2011
  187. Published

    The study of controlled cooling technology and warping of X65 heavy pipeline plate

    Zhang, D. F., Lu, J. S., Antretter, T., Lü, J. G. & Song, P., 1 Dec 2011, In: Beijing Gongye Daxue Xuebao/Journal of Beijing University of Technology. 37, 12, p. 1886-1891 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  188. Published

    A space-time concept for martensitic phase transformation based on statistical physics

    Oberaigner, E. R., Fischlschweiger, M. & Antretter, T., 4 May 2011, The 14th International ESAFORM Conference on Materials Forming: ESAFORM 2011. Menary, G. (ed.). AIP, American Inst. of Physics, Vol. 1353. p. 97-102 6 p. (AIP conference proceedings; vol. 1353).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  189. Published

    A mean field model for transformation induced plasticity including backstress effects

    Cailletaud, G., Fischlschweiger, M. & Antretter, T., 2011, Compact Paper International Symposium on Plasticity 2011. p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  190. Published

    A Meanfield Model for Transformation Induced Plasticity Including Backstress Effects

    Cailletaud, G., Fischlschweiger, M. & Antretter, T., 2011, Macro- to Nano-scale Inelastic Deformation and Failure of Materials & Multi-scale Modeling . p. 100-102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  191. Published

    A methodology to study crystal plasticity inside a compression test sample based on image correlation and EBSD

    Rehrl, C., Kleber, S., Antretter, T. & Pippan, R., 2011, In: Materials characterization. p. 793-800

    Research output: Contribution to journal › Article › Research › peer-review

  192. Published

    A multi-block-spin approach for martensitic phase transformation based on statistical physics

    Fischlschweiger, M., Oberaigner, E., Antretter, T. & Cailletaud, G., 2011, Behavior and Mechanics of Multifunctional Materials and Composites 2011. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  193. Published

    A multi-block-spin-method based on statistical physics describing martensitic phase transformation

    Fischlschweiger, M., Oberaigner, E., Cailletaud, G. & Antretter, T., 2011, Technical Summaries SPIE Smart Structures/NDE 2011. p. 81-81

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  194. Published

    A phenomenological mean field model for coupling phase transformation with plasticity

    Fischlschweiger, M., Cailletaud, G., Antretter, T. & Oberaigner, E., 2011, Advances in heterogeneous material mechanics ICHMM3. p. 738-745

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  195. Published

    Improved Multi-Particle Unit Cell Models for Studying Particle Reinforced Composites: Dissertation Azra Razool

    Antretter, T. (Reviewer), 2011, Wien

    Research output: Other contribution › Transfer › peer-review

  196. Published

    Martensitic Phase Transformations of Nanocrystalline NiTi Shape Memory Alloys Processed by Repeated Cold Rolling

    Peterlechner, M., Waitz, T., Gammer, C. & Antretter, T., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 102, p. 634-642

    Research output: Contribution to journal › Article › Research › peer-review

  197. Published

    Multifunctional Shape Memory Alloys processed by SPD

    Waitz, T., Mangler, C., Antretter, T., Fischer, F.-D., Pranger, W. & Müllner, P., 2011, Proceedings of International Symposium on Giant Straining Process for Advanced Materials (GSAM). p. 88-94

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  198. Published

    Multifunctional Shape Memory Alloys Processed by SPD

    Waitz, T., Mangler, C., Steiner, G., Peterlechner, M., Antretter, T., Fischer, F. D. & Pranger, W., 2011, Proceedings of International Symposium on Giant Straining Process for Advanced Materials (GSAM). p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  199. Published

    Neue Modellierungskonzepte für TRIP – Tranformation Induced Plasticity

    Antretter, T., Fischlschweiger, M. & Cailletaud, G., 2011, Tagungsband. p. 75-79

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  200. Published

    Solution of a time-dependent heat conduction problem by an integral-equation approach

    Leindl, M., Oberaigner, E. & Antretter, T., 2011, In: Computational materials science. p. 178-181

    Research output: Contribution to journal › Article › Research › peer-review

  201. Published

    The cyclic elasto-viscoplastic behavior of a high-speed steel under forging conditions - experiments and simulation

    Ishmurzin, A., Ecker, W., Krobath, M., Orthaber, M., Marsoner, S. & Antretter, T., 2011, In: Procedia Engineering. 10, p. 1991-1996

    Research output: Contribution to journal › Article › Research › peer-review

  202. Published

    The cyclic elasto-viscoplastic behavior of a high-speed steel under forging conditions - experiments and simulations

    Ishmurzin, A., Ecker, W., Krobath, M., Orthaber, M., Marsoner, S. & Antretter, T., 2011, In: Procedia Engineering. 10, p. 1991-1996

    Research output: Contribution to journal › Article › Research › peer-review

  203. 2010
  204. Published

    An Integral-equation Approach to Solve Time-dependent Heat Conduction Problems

    Oberaigner, E., Leindl, M. & Antretter, T., 2010, International Congress of Mathematics, Abstracts, Short Communications, Posters. p. 723-724

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  205. Published

    Experimental validation of microstructure evolution in crystalline materials

    Rehrl, C., Kleber, S., Antretter, T. & Pippan, R., 2010, In: Journal of physics / Conference series. p. 1-4

    Research output: Contribution to journal › Article › Research › peer-review

  206. Published

    Modelling and Simulation of Phase Transformation-Mechanics Coupling Using a Phase Field Method: Dissertation Kais Ammar

    Antretter, T. (Reviewer), 2010, Paris

    Research output: Other contribution › Transfer › peer-review

  207. Published

    Modelling Transformation Induced Plasticity – An Application to Heavy Steel Plates

    Antretter, T., Zhang, D. & Parteder, E., 2010, In: Steel research international. 81, p. 675-680

    Research output: Contribution to journal › Article › Research › peer-review

  208. Published

    Phänomenologische und mikroskopische Modellierung von Formgedächtnislegierungen: Dissertation Stefan Wilmanns

    Antretter, T. (Reviewer), 2010, Paderborn

    Research output: Other contribution › Transfer › peer-review

  209. Published

    Solution of a time-dependent thermoelastic problem by an integral-equation approach

    Leindl, M., Oberaigner, E. & Antretter, T., 2010, IWCMM20 - International Workshop on Computational Mechanics of Materials, Book of Abstracts. p. 50-50

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  210. Published

    Study of nanometer-scaled lamellar microstructure in a Ti-45Al-7.5Nb alloy-Experiments and modeling

    Fischer, F. D., Waitz, T., Scheu, C., Cha, L., Dehm, G., Antretter, T. & Clemens, H., 2010, In: Intermetallics. 18, p. 509-517

    Research output: Contribution to journal › Article › Research › peer-review

  211. Published

    The Correlation between Grain Size and Martensite Morphology in Nano-Structured NiTi Shape Memory Alloys

    Pranger, W., Antretter, T., Waitz, T. & Fischer, F. D., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  212. Published

    Time-Dependent Heat Conduction Problems Solved by an Integral-Equation Approach

    Oberaigner, E., Leindl, M. & Antretter, T., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  213. 2009
  214. Published

    Cold and Warm Forming of Polycrystals: The Effect of Crystal Plasticity

    Rehrl, C., Kleber, S., Antretter, T. & Pippan, R., 2009,

    Macro- to Nano-scale Inelastic Behavior of Materials: Plasticity, Fatigue, & Fracture

    .     p. 319-321

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  215. Published

    Deformation, Stress State and Thermodynamic Force for a Growing Nano-Void in an Elastic-Plastic Material

    Fischer, F. D. & Antretter, T., 2009, In: International journal of plasticity. 25, p. 1819-1832

    Research output: Contribution to journal › Article › Research › peer-review

  216. Published

    Effect of Material Properties on the Thermo-Mechanical Loading and Damage of Pressure Casting Dies – A Numerical Study

    Ecker, W., Leindl, M., Antretter, T., Ebner, R., Siller, I. & Nisslé, S., 2009, Proceedings of the 8th International Tooling Conference. p. 927-939

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  217. Published

    Formation of Martensite Twins in Nano-Structured Nickel Titanium Alloys

    Antretter, T., Waitz, T., Pranger, W. & Fischer, F. D., 2009,

    Macro- to Nano-scale Inelastic Behavior of Materials: Plasticity, Fatigue & Fracture

    .     p. 361-363

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  218. Published

    Macro Modelling and Homogenization for Transformation Induced Plasticity of a Low-Alloy Steel

    Mahnken, R., Schneidt, A. & Antretter, T., 2009, In: International journal of plasticity. 25, p. 183-204

    Research output: Contribution to journal › Article › Research › peer-review

  219. Published

    Phase Transformations of Nano-Crystalline Martensitic Materials

    Waitz, T., Tsuchiya, K., Antretter, T. & Fischer, F. D., 2009, In: MRS Bulletin. 34, p. 814-821

    Research output: Contribution to journal › Article › Research › peer-review

  220. 2008
  221. Published

    Bestimmung der lokalen Verformung in Polykristallinen Werkstoffen

    Rehrl, C., Kleber, S., Antretter, T. & Pippan, R., 2008, Bestimmung der lokalen Verformung in Polykristallinen Werkstoffen. Lehrstuhl für Umformtechnik. Bruno Buchmayr, p. 13-25

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  222. Published

    Competing Accommodation Mechanisms of the Martensite in Nanocrystalline NiTi Shape Memory Alloys

    Waitz, T., Pranger, W., Antretter, T., Fischer, F. D. & Karnthaler, H.-P., 2008, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 481-482, p. 479-483

    Research output: Contribution to journal › Article › Research › peer-review

  223. Published

    Fracture of austenitic steel subject to a wide range of stress triaxiality ratios and crack deformation modes

    Trattnig, G., Antretter, T. & Pippan, R., 2008, In: Engineering Fracture Mechanics. 75, p. 223-235

    Research output: Contribution to journal › Article › Research › peer-review

  224. Published

    Macro Modeling and Homogenization for Identification of Material Parameters to Simulate Phase Transformations

    Mahnken, R., Schneidt, A. & Antretter, T., 2008, Macro Modeling and Homogenization for Identification of Material Parameters to Simulate Phase Transformations. Civil-Comp Press, p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  225. Published

    Measurment of All Six Components of X-Ray Elastic Factors

    Ortner, B., Antretter, T., Hofmann, M. & Werner, E., 2008, In: Materials Science Forum . 571-572, p. 225-229

    Research output: Contribution to journal › Article › Research › peer-review

  226. Published

    Mechanics of Sheared Bands – Applications to Faults, Twins and Variants

    Fischer, F. D., Antretter, T. & Oberaigner, E., 2008, In: Mechanics of materials. 40, p. 195-205

    Research output: Contribution to journal › Article › Research › peer-review

  227. Published

    Numerical Investigation of Thermal Cracks in Pressure Die Casting Tools

    Leindl, M., Ecker, W., Antretter, T. & Ebner, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  228. Published

    Numerische und experimentelle Untersuchung von Temperaturwechselrissnetzwerken

    Leindl, M., Ecker, W., Ebner, R. & Antretter, T., 2008, Numerische und experimentelle Untersuchung von Temperaturwechselrissnetzwerken. p. 157-174

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  229. Published

    Size Effects on Martensitic Phase Transformations in Nanocrystalline NiTi Shape Memory Alloys

    Waitz, T., Antretter, T., Fischer, F. D. & Karnthaler, H.-P., 2008, In: Materials science and technology. 24, p. 934-940

    Research output: Contribution to journal › Article › Research › peer-review

  230. 2007
  231. Published

    Calibration and validation of an elasto-viscoplastic material model for a hot work tool steel used in pressure casting dies

    Ecker, W., Antretter, T. & Ebner, R., 2007, Key engineering materials. Vol. 345-346. p. 685-688 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  232. Published

    Finite Element Simulation of the Effect of surface roughness on nanoindentation of thin films with spherical indenters

    Walter, C., Antretter, T., Daniel, R. & Mitterer, C., 2007, In: Surface & coatings technology. 202, p. 1103-1107

    Research output: Contribution to journal › Article › Research › peer-review

  233. Published

    Size Effects on the Martensitic Martensitic Phase Transformation of NiTi Nanograins

    Waitz, T., Antretter, T., Fischer, F. D., Simha, N. K. & Karnthaler, H.-P., 2007, In: Journal of the mechanics and physics of solids. 55, p. 419-444

    Research output: Contribution to journal › Article › Research › peer-review

  234. Published

    The Morphology of Martensite in Nano-Structured NI-TI Alloys

    Antretter, T., Waitz, T. & Fischer, F. D., 2007, Proceedings of the 1st Seminar on The Mechanics of Multifunctional Materials. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  235. 2006
  236. Published

    On the Algorithmic Implementation of a Material Model Accounting for the Effects of Martensitic Transformation

    Antretter, T., Fischer, F. D., Cailletaud, G. & Ortner, B., 2006, In: Steel research international. 77, p. 733-740

    Research output: Contribution to journal › Article › Research › peer-review

  237. Published

    The cyclic behavior of a hot work tool steel used in pressure casting dies

    Ecker, W., Antretter, T., Ebner, R., Kaschnitz, E., Marsoner, S., Leindl, M. & Köberl, H., 2006, 1. Tagungsband der Leobener Betriebsfestigkeitstage. Montanuniversität Leoben, Lehrstuhl für Allgemeinen Maschinenbau, p. 221-234

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  238. 2005
  239. Published

    Martensitic phase transformations of bulk nanocrystalline NiTi alloys

    Waitz, T., Karnthaler, H. P., Antretter, T. & Fischer, F. D., 1 Dec 2005, Proceedings of an International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2005. Howe, J. M., Laughlin, D. E., Lee, J. K., Dahmen, U. & Soffa, W. A. (eds.). Vol. 2. p. 885-898 14 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  240. 2004
  241. Published

    A numerical model for Transformation Induced Plasticity (TRIP)

    Antretter, T., Fischer, F. D. & Cailletaud, G., 1 Dec 2004, In: Journal de physique / 4. 115, p. 233-241 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  242. 2003
  243. Published

    Effect of back stress evolution due to martensitic transformation on iso-volume fraction lines in a Cr-Ni-Mo-Al-Ti maraging steel

    Tanaka, K., Terasaki, T., Goto, S., Antretter, T., Fischer, F. D. & Cailletaud, G., 20 Jan 2003, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 341, 1-2, p. 189-196 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  244. Published

    Experimental and numerical investigations of the mechanics of martensitic transformation

    Antretter, T., 2003

    Research output: Thesis › Habilitation thesis › peer-review

  245. Published

    Optimized Shape Memory Dampers Modelling and Application

    Oberaigner, E., Antretter, T., Fischer, F. D. & Tanaka, K., 2003, Proceedings of the Third World Conference on Structural Control. p. 561-582

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  246. 2002
  247. Published

    Back stress evolution and iso-volume fraction lines in a Cr-Ni-Mo-Al-Ti maraging steel in the process of martensitic transformation

    Nagayama, K., Terasaki, T., Goto, S., Tanaka, K., Antretter, T., Fischer, F. D., Cailletaud, G. & Azzouz, F., 25 Oct 2002, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 336, 1-2, p. 30-38 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  248. Published

    Theory, experiments and numerical modelling of phase transformations with emphasis on TRIP

    Antretter, T., Fischer, F. D., Tanaka, K. & Cailletaud, G., 1 Jun 2002, In: Steel research international. 73, 6-7, p. 225-235 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  249. Published

    Diffusional Phase Transformation and Deformation in Steels

    Gamsjäger, E., Antretter, T., Schmaranzer, C., Preis, W., Chimani, C. M., Simha, N. K., Svoboda, J. & Fischer, F. D., 2002, In: Computational materials science. 50, p. 92-99

    Research output: Contribution to journal › Article › Research › peer-review

  250. Published

    Simulation of the Damping of a Shape Memory Alloy Rod by using the Likhachev Model

    Pushtshaenko, O., Oberaigner, E., Antretter, T., Fischer, F. D. & Tanaka, K., 2002, In: Journal of intelligent material systems and structures. 13, p. 817-823

    Research output: Contribution to journal › Article › Research › peer-review

  251. Published

    The Thermo-mechanical Response to a General Loading Path of a Martensitically Transforming Steel

    Antretter, T., Fischer, F. D., Lube, T., Tanaka, K. & Cailletaud, G., 2002, In: Journal of intelligent material systems and structures. 13, 12, p. 881-815

    Research output: Contribution to journal › Article › Research › peer-review

  252. 2001
  253. Published

    Mechanical properties of a Cr-Ni-Mo-Al-Ti maraging steel in the process of martensitic transformation

    Nagayama, K., Terasaki, T., Tanaka, K., Fischer, F. D., Antretter, T., Cailletaud, G. & Azzouz, F., 30 Jun 2001, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 308, 1-2, p. 25-37 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  254. Published

    Susceptibility to failure of the constituents of particulate two-phase composites

    Antretter, T. & Fischer, F. D., 1 Jan 2001, In: International Journal of Damage Mechanics. 10, 1, p. 56-72 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  255. 2000
  256. Published

    Deformation behavior of elastic-plastic materials containing instantly transforming inclusions

    Antretter, T. & Fischer, F. D., 1 Dec 2000, Key engineering materials. Vol. 177-180 II. p. 431-436 6 p. (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  257. Published

    The role of backstress in phase transforming steels

    Fischer, F. D., Antretter, T., Azzouz, F., Cailletaud, G., Pineau, A., Tanaka, K. & Nagayama, K., 1 Dec 2000, In: Archives of Mechanics. 52, 4-5, p. 569-588 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  258. Published

    New view on transformation induced plasticity (TRIP)

    Fischer, F. D., Reisner, G., Werner, E., Tanaka, K., Cailletaud, G. & Antretter, T., 1 Jun 2000, In: International journal of plasticity. 16, 7, p. 723-748 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  259. 1998
  260. Published

    Failure mechanisms of particulate two-phase composites

    Antretter, T. & Fischer, F. D., 1 Dec 1998, In: Materials Research Society symposium proceedings. 529, p. 151-156 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  261. Published

    Particle cleavage and ductile crack growth in a two-phase composite on a microscale

    Antretter, T. & Fischer, F. D., 1 Dec 1998, In: Computational materials science. 13, 1-3, p. 1-7 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  262. 1997
  263. Published

    Critical shapes and arrangements of carbides in high-speed tool steel

    Antretter, T. & Fischer, F. D., 1 Sept 1997, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 237, 1, p. 6-11 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  264. 1996
  265. Published

    The stress state around two spatially arranged ellipsoidal inclusions - A case study for high-speed tool steel

    Antretter, T. & Fischer, F. D., 1 Dec 1996, In: Computational materials science. 7, 1-2, p. 247-252 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations

Contact

Phone: 4000

Latest Research Output

View more (236)