Thomas Antretter

1 - 100 out of 236Page size: 100

Research output

  1. 2025
  2. Published

    On the effect of isotropic and anisotropic dissipative response functions with associated and nonassociated flow on the inelastic behavior of polymeric composites

    Gaddikere Nagaraja, S., Antretter, T. & Schuecker, C., 16 Feb 2025, In: Mechanics of advanced materials and structures. ??? Stand: 28. Februar 2025, ??? Stand: 28. Februar 2025, 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Finite Element Investigation of the Dynamic Behavior of High-Speed Turnouts with Swing-Nose Crossing

    Sistaninia, M., Daves, W., Bucher, C., Antretter, T. & Gänser, H. P., 2025, Advances in Dynamics of Vehicles on Roads and Tracks III - Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, Rail Vehicles. Huang, W. & Ahmadian, M. (eds.). p. 1047-1058 12 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    On the Road Towards Understanding Squats - Metallographic Investigations of Rails

    Gschwandl, T., Spalek, A., Antretter, T. & Daves, W., 2025, Advances in Dynamics of Vehicles on Roads and Tracks III - Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, Rail Vehicles. Huang, W. & Ahmadian, M. (eds.). p. 314-323 10 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. 2024
  6. Published

    A variational framework for Cahn–Hilliard-type diffusion coupled with Allen–Cahn-type multi-phase transformations in elastic and dissipative solids

    Gaddikere Nagaraja, S. & Antretter, T., 24 Sept 2024, In: International journal of plasticity. 182.2024, November, 20 p., 104131.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Modeling solute drag during austenite–ferrite transformation with ab initio binding energies

    Bloder, B. F., Scheiber, D., Raninger, P., Ecker, W. & Antretter, T., 17 May 2024, In: Materialia. 36.2024, August, 9 p., 102128.

    Research output: Contribution to journal › Article › Research › peer-review

  8. E-pub ahead of print

    Investigation of probable squat growth from initial surface cracks in rails using a three-dimensional rollover simulation

    Gschwandl, T. J., Antretter, T., Künstner, D., Scheriau, S. & Daves, W., 29 Apr 2024, (E-pub ahead of print) In: Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. 238.2024, 4, p. 406-413 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Multi-physical simulation of an inductive heat treatment process on 50CrMo4 steel rods and validation by HEXRD cross-sectional measurements

    Mevec, D. G., Raninger, P., Jászfi, V., Prevedel, P. & Antretter, T., 15 Apr 2024, In: Materialia. 34.2024, May, 102094.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    Numerical and experimental assessment of liquid metal embrittlement in externally loaded spot welds

    Prabitz, K. M., Antretter, T., Rethmeier, M., El-Sari, B., Schubert, H., Hilpert, B., Gruber, M., Sierlinger, R. & Ecker, W., 30 Jan 2024, (E-pub ahead of print) In: Welding in the world. 68.2024, 10, p. 2713-2722 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    A Chemo-Mechanically Coupled Model for the Prediction of Phase Segregation and Pore Formation in Microelectronic Solders

    Antretter, T., 7 Jan 2024.

    Research output: Contribution to conference › Presentation › Research › peer-review

  12. Published

    A comprehensive methodology for criticality assessment of microvias in printed circuit board assemblies

    Kamble, V. G., Patel, D. R., Schipfer, C., Thalhamer, A., Zuendel, J., Krivec, T., Antretter, T. & Fuchs, P. F., 2024, 2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024. Institute of Electrical and Electronics Engineers, (2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Exploring the Impact of Laser Drilling on Material Thermal Decomposition: A Computational Study Using KratosMultiphysics

    Peng, C., Tao, Q., Krivec, T., Casas, G., Latorre, S., Antretter, T., Macher, J. & Fuchs, P., 2024, 2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024. Institute of Electrical and Electronics Engineers, (2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. 2023
  15. Published

    Impact crusher kinematics: The dynamics of an impact swing mechanism as an analytical-mathematical model

    Kemper, D., Fimbinger, E., Antretter, T., Egger, M. & Flachberger, H., 20 Dec 2023, In: Results in Engineering. 21.2024, March, p. 101694 13 p., 101694.

    Research output: Contribution to journal › Article › Research › peer-review

  16. E-pub ahead of print

    Numerical treatment of reactive diffusion using the discontinuous Galerkin method

    Flachberger, W., Svoboda, J., Antretter, T., Petersmann, M. & Leitner, S., 13 Oct 2023, (E-pub ahead of print) In: Continuum Mechanics and Thermodynamics. 36.2024, January, p. 61-74 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    A breakage model for DEM based on a probabilistic particle replacement with Voronoi fragments

    Denzel, M., Prenner, M., Sifferlinger, N. A. & Antretter, T., 17 Aug 2023, In: Minerals engineering. 203.2023, November, 14 p., 108328.

    Research output: Contribution to journal › Article › Research › peer-review

  18. E-pub ahead of print

    A breakage model for DEM based on a probabilistic particle replacement with Voronoi fragments

    Denzel, M., Prenner, M., Sifferlinger, N. A. & Antretter, T., 17 Aug 2023, (E-pub ahead of print) In: Minerals engineering. 203.2023, November, 14 p., 108328.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Variational formulation of Cahn–Hilliard-type diffusion coupled with crystal plasticity

    Gaddikere Nagaraja, S., Flachberger, W. & Antretter, T., Aug 2023, In: International journal of plasticity. 167.2023, August, 22 p., 103652.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Experimental and Numerical Visualisation of Subsurface Rail Deformation in a Full-Scale Wheel–Rail Test Rig

    Gschwandl, T. J., Weniger, T. M., Antretter, T., Künstner, D., Scheriau, S. & Daves, W., Jun 2023, In: Metals. 13.2023, 6, 18 p., 1089.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Residual Stress Evolution in Low-Alloyed Steel at Three Different Length Scales

    Leitner, S., Winter, G., Klarner, J., Antretter, T. & Ecker, W., 23 Mar 2023, In: Materials. 16.2023, 7, 17 p., 2568.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    On the road towards understanding squats: residual stress state of rails

    Gschwandl, T. J., Daves, W., Antretter, T., Bucher, C. & Künstner, D., 2023, In: Procedia Structural Integrity. 46, p. 17-23 7 p.

    Research output: Contribution to journal › Conference article › peer-review

  23. Published

    Prozessoptimierung mittels multiphysikalischer Modellierung des Widerstandspunktschweißens

    Prabitz, K., Antretter, T., Schubert, H., Hilpert, B., Gruber, M., Sierlinger, R., Polcik, P. & Ecker, W., 2023, XLI. Verformungskundliches Kolloquium.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Simulation of the mechanical response of the individual intermetallic phases in multi-phase γ titanium aluminides

    Seligmann, B., Spörk-Erdely, P. & Antretter, T., 2023.

    Research output: Contribution to conference › Poster › Research

  25. 2022
  26. Published

    A Technology-Enhanced ‘Assessment System for Teaching and Assessment using a Computer Algebra Kernel’ (STACK): The Best Contributions of 2022’s STACK Community Meeting at the Montanuniversitaet Leoben, Austria

    Orthaber, M. & Antretter, T., 8 Dec 2022, In: International journal emerging technologies in learning : iJET. 17.2022, 23, p. 4-6 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Towards virtually optimized curing cycles for polymeric encapsulations in microelectronics

    Schipfer, C., Gschwandl, M., Fuchs, P., Antretter, T., Feuchter, M., Morak, M., Tao, Q. & Schingale, A., Dec 2022, In: Microelectronics Reliability. 139.2022, December, 9 p., 114799.

    Research output: Contribution to journal › Article › Research › peer-review

  28. E-pub ahead of print

    Towards electro-thermo-mechanical lifetime assessment for arbitrary power electronics

    Gschwandl, M., Friedrich, B. E., Pfost, M., Antretter, T., Fuchs, P. F., Mitev, I., Tao, Q. & Schingale, A., 4 May 2022, (E-pub ahead of print) In: Microelectronics Reliability. 133.2022, June, 9 p., 114537.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Characterization and modeling of a typical curing material for photoresist films

    Peng, C., Morak, M., Thalhamer, A., Gschwandl, M., Fuchs, P., Tao, Q., Krivec, T., Antretter, T. & Celigueta, M. A., 2022, 2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2022. Institute of Electrical and Electronics Engineers, (2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2022).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. 2021
  31. Published

    Liquid Metal Embrittlement of Advanced High Strength Steel: Experiments and damage modeling

    Prabitz, K., Asadzadeh, M. Z., Pichler, M., Antretter, T., Beal, C., Schubert, H., Hilpert, B., Gruber, M., Sierlinger, R. & Ecker, W., 21 Sept 2021, In: Materials. 14.2021, 18, 15 p., 5451.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Validated multi-physical finite element modelling of the spot welding process of the advanced high strength steel dp1200hd

    Prabitz, K., Pichler, M., Antretter, T., Schubert, H., Hilpert, B., Gruber, M., Sierlinger, R. & Ecker, W., 18 Sept 2021, In: Materials. 14.2021, 18, 19 p., 5411.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Ductile failure modelling in pre-cracked solids using coupled fracture locus theory

    Baltic, S., Magnien, J., Kolitsch, S., Gänser, H.-P., Antretter, T. & Hammer, R., Jul 2021, In: Engineering Fracture Mechanics. 252.2021, July, 13 p., 107845.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    MUL 4.0 – Digitalisierung der Wertschöpfungskette vom Rohmaterial bis hin zum Recycling

    Woschank, M., Ralph, B. J., Kaiblinger, A., Miklautsch, P., Pacher, C., Sorger, M., Zsifkovits, H., Stockinger, M., Pogatscher, S., Antretter, T. & Antrekowitsch, H., 2 Jun 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 166, 6, p. 309-313

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Evaluation of Cement-Casing & Cement-Rock Bond Integrity during Well Operations.

    Lamik, A., Thonhauser, G., Ravi, K., Prohaska-Marchried, M., Pittino, G. & Antretter, T., 27 May 2021, p. 1-13. 13 p.

    Research output: Contribution to conference › Paper › peer-review

  36. Published

    Machine learning assisted calibration of a ductile fracture locus model

    Baltic, S., Asadzadeh, M. Z., Hammer, P., Magnien, J., Gänser, H. P., Antretter, T. & Hammer, R., May 2021, In: Materials and Design. 203.2021, May, 15 p., 109604.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Electro-Thermo-Mechanical Reliability Assessment of Arbitrary Power Electronics

    Gschwandl, M., Pfost, M., Antretter, T., Fuchs, P. F., Mitev, I., Tao, Q. & Schingale, A., 19 Apr 2021, 2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021. Institute of Electrical and Electronics Engineers, 9410862. (2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Prediction of Curing Induced Residual Stresses in Polymeric Encapsulation Materials for Microelectronics

    Schipfer, C., Gschwandl, M., Fuchs, P., Antretter, T., Feuchter, M., Morak, M., Tao, Q. & Schingale, A., 19 Apr 2021, 2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021. Institute of Electrical and Electronics Engineers, 9410855. (2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Analysis of shape, orientation and interface properties of Mo2C precipitates in Fe using ab-initio and finite element method calculations

    Leitner, S., Scheiber, D., Dengg, T., Spitaler, J., Antretter, T. & Ecker, W., 1 Feb 2021, In: Acta materialia. 204.2021, 1 February, 11 p., 116478.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Thermal and Moisture Dependent Material Characterization and Modeling of Glass Fibre Reinforced Epoxy Laminates

    Yalagach, M., Fuchs, P., Antretter, T., Feuchter, M., Tao, Q. & Weber, M., 29 Jan 2021, In: Sensors & transducers. 248.2021, 1, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. 2020
  42. Published

    Numerical analysis of a MEMS sensor's deformation behavior considering dynamic moisture conditions

    Yalagach, M., Fuchs, P. F., Antretter, T., Qi, T. & Weber, M., 2 Dec 2020, 2020 IEEE 22nd Electronics Packaging Technology Conference, EPTC 2020. Institute of Electrical and Electronics Engineers, p. 380-385 6 p. 9315091. (2020 IEEE 22nd Electronics Packaging Technology Conference, EPTC 2020).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Coupled damage variable based on fracture locus: Prediction of ductile failure in a complex structure

    Baltic, S., Magnien, J., Gänser, H.-P., Antretter, T. & Hammer, R., 23 Oct 2020, In: International journal of solids and structures. 207.2020, December, p. 132-144 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Too much to ask for oder Wie ein Moodle Server bei laufender Prüfung in die Knie gezwungen wird

    Orthaber, M. & Antretter, T., 8 Oct 2020, <fnma> Magazin 03|2020. Graz, Vol. 03/2020.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Education

  45. Published

    EXAM-ON-DEMAND: SCHRIFTLICHE ONLINE-PRÜFUNGEN ALS ANTWORT AUF DEN LOCKDOWN

    Orthaber, M. & Antretter, T., 31 Jul 2020, fnma Magazin 02/2020 - E-Assessment und E-Examinations . Graz, Vol. 02/2020. p. 47 - 49 3 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Education

  46. Published

    Concepts for E-Assessments in STEM on the Example of Engineering Mechanics: How to Assess Complex EngineeringProblemsElectronically

    Orthaber, M., Stütz, D., Antretter, T. & Ebner, M., 26 Jun 2020, In: International journal emerging technologies in learning : iJET. 15.2020, 12, p. 136-152 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Model-Based Residual Stress Design in Multiphase Seamless Steel Tubes

    Leitner, S., Winter, G., Klarner, J., Antretter, T. & Ecker, W., 16 Jan 2020, In: Materials. 13.2020, 2, 12 p., 439.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Dilatometer experiments to determine the phase transformation kinetics and TRIP behavior for predeformed 20MnB8 steel sheets

    Tomasch, M., Ecker, W., Antretter, T. & Stockinger, M. (Publisher), 2020, XXXIX. Verformungskundliches Kolloquium, Tagungsband. Vol. 39. p. 72-77

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. 2019
  50. Published

    Coupled damage variable based on fracture locus: Modelling and calibration

    Baltic, S., Magnien, J., Gänser, H.-P., Antretter, T. & Hammer, R., 23 Nov 2019, In: International journal of plasticity. 126.2020, March, 24 p., 102623.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    E-ASSESSMENT IN ENGINEERING MECHANICS: HOW DOES IT COMPARE TO CLASSICAL PAPER-PENCIL EXAMS?

    Orthaber, M., Antretter, T., Jurisits, R. & Schemmel, M., 11 Nov 2019, 12TH INTERNATIONAL CONFERENCE OF EDUCATION, RESEARCH AND INNOVATION (ICERI2019). p. 9381-9390

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Thermodynamic and mechanical stability of Ni3X-type intermetallic compounds

    Kulo, N., He, S., Ecker, W., Pippan, R., Antretter, T. & Razumovskiy, V. I., Nov 2019, In: Intermetallics. 114.2019, November, 9 p., 106604.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Unifcation of the non-linear geometric transformation theory of martensite and crystal plasticity - Application to dislocated lath martensite in steels

    Petersmann, M., Antretter, T., Cailletaud, G., Sannikov, A., Ehlenbröker, U. & Fischer, F.-D., Aug 2019, In: International journal of plasticity. 119.2019, August, p. 140-155 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    The Effect of Loading during Martensitic Transformation of a Margaging Steel after Prior Austenite Grain Size Refinement by Thermal Cycling

    Petersmann, M., Antretter, T., Sannikov, A., Sartory, B. & Ehlenbröker, U., 30 May 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 6, p. 360-372 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Numerical analysis of the influence of polymeric materials on a MEMS package performance under humidity and temperature loads

    Yalagach, M., Filipp Fuchs, P., Wolfberger, A., Gschwandl, M., Antretter, T., Feuchter, M., Tak, C. & Tao, Q., 1 May 2019, Proceedings - IEEE 69th Electronic Components and Technology Conference, ECTC 2019. Institute of Electrical and Electronics Engineers, p. 2029-2035 7 p. 8811123. (2019 IEEE 69TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC)).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Evaluation of Digital Image Correlation Techniques for the Determination of Coefficients of Thermal Expansion for Thin Reinforced Polymers

    Gschwandl, M., Frewein, M., Fuchs, P. F., Antretter, T., Pinter, G. & Novak, P., 5 Mar 2019, EMAP 2018 - 2018 20th International Conference on Electronic Materials and Packaging. Institute of Electrical and Electronics Engineers, 8660763. (EMAP 2018 - 2018 20th International Conference on Electronic Materials and Packaging).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Deformation-induced phase transformation in a Co-Cr-W-Mo alloy studied by high-energy X-ray diffraction during in-situ compression tests

    Weißensteiner, I., Petersmann, M., Erdely, P., Stark, A., Antretter, T., Clemens, H. & Maier-Kiener, V., Feb 2019, In: Acta materialia. 164.2019, February, p. 272-282 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    A Sequential Finite Volume Method / Finite Element Analysis of a Power Electronic Semiconductor Chip

    Gschwandl, M., Fuchs, P. F., Antretter, T., Pfost, M., Mitev, I., Tao, Q., Krivec, T., Schingale, A. & Decker, M., 2019, p. 1509-1514.

    Research output: Contribution to conference › Paper › peer-review

  59. Published

    Cyclic heat-up and damage-relevant substrate plastification of single- and bilayer coated milling inserts evaluated numerically

    Nemetz, A., Daves, W., Klünsner, T., Ecker, W., Schäfer, J., Czettl, C. & Antretter, T., 2019, In: Surface & coatings technology. 360.2019, February, p. 39-49 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Residual stress and microstructure evolution in steel tubes for different cooling conditions – Simulation and verification

    Brunbauer, S., Winter, G., Antretter, T., Staron, P. & Ecker, W., 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 747, p. 73-79

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Shot peening-induced plastic deformation of individual phases within a coated WC-Co hard metal composite material including WC plastification

    Faksa, L., Daves, W., Klünsner, T., Maier, K., Antretter, T., Czettl, C. & Ecker, W., 2019, In: Surface & coatings technology. 380.2019, 25 December, 11 p., 125026.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Simulation of Phase Transformation and Material Plasticity for Press Hardening

    Tomasch, M., Ecker, W. & Antretter, T., 2019, Proceedings of NUMIFORM 2019: the 13th International Conference on Numerical Methods in Industrial Forming Processes. p. 362-365

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. 2018
  64. Published

    Crack arrest in thin metallic film stacks due to material- and residual stress inhomogeneities

    Kozic, D., Gänser, H.-P., Brunner, R., Kiener, D., Antretter, T. & Kolednik, O., 31 Dec 2018, In: Thin solid films. p. 14-22 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Influence of environmental factors like temperature and humidity on MEMS packaging materials.

    Yalagach, M., Fuchs, P. F., Mitev, I., Antretter, T., Feuchter, M., Wolfberger, A. & Qi, T., 26 Nov 2018, 2018 7th Electronic System-Integration Technology Conference, ESTC 2018 - Proceedings. Institute of Electrical and Electronics Engineers, 8546484

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    The effect of loading during martensitic transformation of a maraging steel after prior austenite grain size refinement by thermal cycling

    Petersmann, M., Antretter, T. & Sannikov, A., 19 Sept 2018, Sonderbände der Praktischen Metallographie Band 52. p. 207-212 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Sucker Rod String Design Optimization Using an Innovative Finite Element Simulation Approach

    Langbauer, C., Antretter, T. & Hofstätter, H., 1 Sept 2018, In: Oil gas European magazine. 44.2018, III, p. 126-132 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Modelling blast fragmentation of cylinders of mortar and rock

    Iravani, A., Kukolj, I., Ouchterlony, F., Antretter, T. & Åström, J., Jun 2018, Fragblast 12: 12th International Symposium on Rock Fragmentation by Blasting. Schunnesson, H. & Johansson, D. (eds.). Luleå: Luleå Univ. of Technology, p. 597-610 15 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Sucker Rod String Design Optimization using an Innovative Finite Elements Simulation Approach

    Langbauer, C., Hofstätter, H. & Antretter, T., 24 Apr 2018, NAFEMS Nordic Tagungsband 2018. p. 71-73

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Sucker Rod String Design Optimization using an Innovative Finite Elements Simulation Approach

    Langbauer, C., Hofstätter, H. & Antretter, T., 19 Apr 2018, DGMK Tagungsbericht 2018. p. 227 237 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Deep drawing of press hardening steels

    Tomasch, M., Ecker, W., Kaiser, R. & Antretter, T., 2018, Journal of Physics: Conference Series. IOP Publishing Ltd., Vol. 1063. 012038

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Evaluation of Digital Image Correlation Techniques for the Determination of Coefficients of Thermal Expansion for Thin Reinforced Polymers

    Gschwandl, M., Frewein, M., Fuchs, P. F., Antretter, T., Pinter, G. G. & Novàk, P., 2018.

    Research output: Contribution to conference › Poster › Research

  73. Published

    Evaluation of Digital Image Correlation Techniques for the Determination of Coefficients of Thermal Expansion for Thin Reinforced Polymers

    Gschwandl, M., Frewein, M., Fuchs, P. F., Antretter, T., Pinter, G. G. & Novàk, P., 2018, EMAP 2018 Conference Proceedings. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Gradient polymer composites for optimum heat dissipation

    Marx, P., Morak, M., Gschwandl, M., Fuchs, P., Antretter, T., Pfost, M., Kern, W. & Wiesbrock, F., 2018, In: Journal of the American Chemical Society. 2, 1 p., PMSE-772.

    Research output: Contribution to journal › Meeting Abstract

  75. Published

    Model Free Kinetics coupled with Finite Element Method for curing simulation of thermosetting epoxy resins

    Tao, Q., Pinter, G. G., Antretter, T., Krivec, T. & Fuchs, P., 2018, In: Journal of Applied Polymer Science. p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Modeling Dry Wear of Piston Rod Sealing Elements of Reciprocating Compressors Considering Gas Pressure Drop Across the Dynamic Sealing Surface

    Kaufmann, A., Lindner-Silwester, T. & Antretter, T., 2018, In: Journal of tribology (Transactions of the ASME).

    Research output: Contribution to journal › Article › Research › peer-review

  77. 2017
  78. Published

    Finite Element Based Optimization and Improvement of the Sucker Rod Pumping System

    Langbauer, C. & Antretter, T., 16 Nov 2017. 18 p.

    Research output: Contribution to conference › Paper › peer-review

  79. Published

    Prediction and Characterization of Residual Stresses after Heat Treatment of Massive Hot Work Tool Steel Components

    Schemmel, M., Antretter, T., Ecker, W. & Prevedel, P., 19 Apr 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  80. Published

    Porenschließverhalten beim mehrdirektionalen und mehrstufigen Freiformschmieden

    Kaiser, R., Tewes, A., Wieser, V. & Antretter, T., 18 Mar 2017, XXXVI. Verformungskundliches Kolloquium: Zauchensee von 18.3 bis 22.3.2017. Leoben: Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 134 - 139 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Modeling the interplay between transformation and plasticity in low-carbon steels - A micro-level constitutive model / RVE approach

    Petersmann, M., Antretter, T., Ehlenbröcker, U. & Cailletaud, G., 27 Feb 2017.

    Research output: Contribution to conference › Poster › Research

  82. Published

    A new approach predicting the evolution of laminated nanostructures - Martensite in NiTi as an example

    Petersmann, M., Antretter, T., Waitz, T. & Fischer, F. D., 14 Feb 2017, In: Modelling and simulation in materials science and engineering. 25.2017, February, 17 p., 035004.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    An Energy Approach to Determine the Martensite Morphology in Nanocrystalline NiTi

    Petersmann, M., Pranger, W., Waitz, T. & Antretter, T., 31 Jan 2017, In: Advanced engineering materials. 19.2017, 4, 6 p., 1600684.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Experimental and computational approach to evaluate the effect of leveling on the change of tensile properites of heavy steel plates

    Kaltenbrunner, T., Ecker, W., Antretter, T., Kaiser, R., Parteder, E. & Egger, R., 2017, AIP Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Numerical analysis of the rock cutting process based on a two-parameter description of tensile strength

    Pittino, G., Galler, R., Antretter, T., Mikl-Resch, M. J., Tichy, R., Ecker, W., Gimpel, M. & Kargl, H., 2017, Proceedings of 13th ISRM International Congress of Rock Mechanics 2015. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Numerical simulation of stress-free shotcrete installation in the underground structures using finite element program ABAQUS

    Darmaev, E., Galler, R. & Antretter, T., 2017, Proceedings of the IV International Conference on Computational Methods in Tunneling and Subsurface Engineering: EURO:TUN 2017. Innsbruck, p. 339-346 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    Numerical study of the influence of irradiation parameters on the microwave-induced stresses in granite

    Toifl, M., Hartlieb, P., Meisels, R., Antretter, T. & Kuchar, F., 2017, In: Minerals engineering. 103-104.2017, April, p. 78-92 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    On Variants, Blocks and Packets and their Interaction with Crystal Plasticity

    Antretter, T., Petersmann, M., Cailletaud, G., Ehlenbröcker, U. & Vieweg, A., 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  89. 2016
  90. E-pub ahead of print

    Extracting flow curves from nano-sized metal layers in thin film systems

    Kozic, D., Maier-Kiener, V., Konetschnik, R., Gänser, H.-P., Antretter, T., Brunner, R. & Kiener, D., 7 Dec 2016, (E-pub ahead of print) In: Scripta materialia. 130.2017, 15 March, p. 143-147 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    A Mean-Field Model for TRIP - Algorithms and Parameter Identification

    Petersmann, M. & Antretter, T., 24 Aug 2016.

    Research output: Contribution to conference › Poster › Research

  92. E-pub ahead of print

    New approach for the simulation of chain drive dynamics with consideration of the elastic environment

    Grinschgl, M., Reich, F. M., Abeltshauser, R., Eder, M. & Antretter, T., 5 May 2016, (E-pub ahead of print) In: Proceedings of the Institution of Mechanical Engineers Engineers, Part K, Journal of multi-body dynamics. 231.2017, 3, p. 103-120 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Numerical study of the influence of irradiation parameters on the microwave-induced stresses in granite for industrial applications

    Toifl, M., Hartlieb, P., Meisels, R., Antretter, T. & Kuchar, F., 11 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  94. Published

    Numerical study of the influence of irradiation parameters on the microwave-induced stresses in granite for industrial applications

    Toifl, M., Hartlieb, P., Meisels, R., Antretter, T. & Kuchar, F., 11 Apr 2016, Comminution '16 - Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Eigenspannungsoptimiertes Richtkonzept: Anwendung auf Langprodukte

    Kaiser, R., Antretter, T. & Buchmayr, B., 5 Mar 2016, Tagungsgband XXXV. Verformungskundliches Kolloquium 2016: Tagungsband. Buchmayr, B. (ed.). Leoben: Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 153-159 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. E-pub ahead of print

    3D numerical study on microwave induced stresses in inhomogeneous hard rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 18 Jan 2016, (E-pub ahead of print) In: Minerals engineering. 90.2016, May, p. 29-42 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Calculation of crack driving Forces of surface cracks subjected to rolling/sliding contact

    Krácalik, M., Daves, W. & Antretter, T., 2016, In: Engineering Fracture Mechanics. 152, 2, p. 10-25

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Experimental and theoretical evidence of displacive martensite in an intermetallic Mo-containing Ƴ-TiAl based alloy

    Mayer, S., Petersmann, M., Fischer, F. D., Clemens, H., Waitz, T. & Antretter, T., 2016, In: Acta materialia. 115, p. 242-249 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Finite element analysis of arbitrarily complex electronics devices

    Gschwandl, M., Fuchs, P., Fellner, K., Antretter, T., Krivec, T. & Tao, Q., 2016, Proceedings of the 18th Electronics Packaging Technology Conference EPTC2016. p. 497-500

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Fracture and Material Behavior of Thin Film composites

    Kozic, D., Konetschnik, R., Maier-Kiener, V., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2016, 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) . Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Free edges at bilayered compounds - a short analytical and numerical reconsideration

    Antretter, T., Fischer, F. D., Rammerstorfer, F. G. & Zickler, G. A., 2016, In: Archive of applied mechanics. 86, p. 2053-2061

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Influence of the levelling process on the mechanical properties of heavy steel plates

    Kaltenbrunner, T., Antretter, T., Ecker, W., Kaiser, R., Gänser, H.-P. & Parteder, E., 2016, Proceedings of Rolling '16.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Modeling of variant-interaction during bainitic phase transformation

    Ehlenbröker, U., Mahnken, R., Petersmann, M. & Antretter, T., 2016, IOP Conference Series Materials Science and Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    Numerical simulation of the electrical performance of printed circuit boards under cyclic thermal loads

    Fellner, K., Antretter, T., Fuchs, P. F. & Tao, Q., 2016, In: Microelectronics Reliability. p. 148-155

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Stress Relaxation by Power-Law Creep During Growth of a Misfitting Precipitate

    Fischer, F. D., Svoboda, J., Antretter, T. & Kozeschnik, E., 2016, In: International journal of solids and structures. 96, p. 74-80

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Thermo-physical properties of selected hard rocks and their relation to microwave-assisted comminution

    Hartlieb, P., Toifl, M., Kuchar, F., Meisels, R. & Antretter, T., 2016, In: Minerals engineering. 91.2016, p. 34 - 41 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  107. 2015
  108. E-pub ahead of print

    Cyclic mechanical behavior of thin layers of copper: A theoretical and numerical study

    Fellner, K., Antretter, T., Fuchs, P. & Pelisset, T. M. A., 8 Dec 2015, (E-pub ahead of print) In: The Journal of Strain Analysis for Engineering Design. 51.2016, 2, p. 1-9 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  109. Published

    Special cases of martensite compatibility: A near single-variant habit-plane and the martensite of nanocrystalline NiTi

    Petersmann, M. & Antretter, T., 1 Dec 2015, MATEC Web of Conferences : ESOMAT 2015 – 10th European Symposium on Martensitic Transformations . Schryvers, N. & Van Humbeeck, J. (eds.). 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  110. Published

    Crystallographic aspects of phase transformations in intermetallics and steels

    Petersmann, M., Antretter, T. & Ehlenbröcker, U., 4 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  111. Published

    Modelling of Precipitation in High Strength Creep Resistant Steels

    Antretter, T., Fischer, F. D., Kozeschnik, E. & Svoboda, J., 10 Aug 2015.

    Research output: Contribution to conference › Presentation › Research

Previous 1 2 3 Next
View graph of relations

Contact

Phone: 4000

Latest Research Output

View more (236)