Svea Mayer

(Former)

201 - 225 out of 225Page size: 50

Research output

  1. 2011
  2. Published

    The Characterisation of a Powder Metallurgically Manufactured TNMTM Titanium Aluminide Alloy Using Complimentary Quantitative Methods

    Schloffer, M., Schmölzer, T., Mayer, S., Schwaighofer, E., Hawranek, G., Schimansky, F.-P., Pyczak, F. & Clemens, H., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 594-604

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    The Contribution of High-Energy X-Rays and Neutrons to Characterization and Development of Intermetallic Titanium Aluminides

    Schmölzer, T., Liss, K.-D., Peter, S., Mayer, S. & Clemens, H., 2011, In: Advanced engineering materials. p. 685-699

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2010
  5. Published

    Characterization of TiAl by means of in-situ synchrotron radiation

    Schmölzer, T., Liss, K.-D., Zickler, G., Mayer, S. & Clemens, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  6. Published

    Charakterisierung einer Pulvermetallurgisch hergestellten TNM TM-Titanaluminid Legierung mittels komplementärer quantitativer Methoden

    Schloffer, M., Schmölzer, T., Mayer, S., Schwaighofer, E., Hawranek, G., Schimansky, F.-P., Pyczak, F. & Clemens, H., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 239-244

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Einfluss der bainitischen Umwandlung auf die mechanischen Eigenschaften von Warmarbeitsstählen

    Mayer, S., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 388-393

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Einfluss von Wärmebehandlungen auf das Gefüge einer mehrphasigen Titanalumind-Legierung

    Schwaighofer, E., Schloffer, M., Schmölzer, T., Mayer, S., Clemens, H. & Guether, V., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 221-226

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Intermetallische y-Titanaluminid-Basislegierungen aus metallographischer Sicht

    Clemens, H. & Mayer, S., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 13-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Phase Transition and Ordering Temperatures of TiAl-Mo Alloys Investigated by In-Situ Diffraction Experiments

    Schmölzer, T., Mayer, S., Haupt, F., Zickler, G., Sailer, C., Lottermoser, L., Güther, V., Liss, K.-D. & Clemens, H., 2010, In: Materials Science Forum . p. 456-459

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Reibschweißen von intermetallischen Titanaluminiden - Gefügeentwicklung und mechanische Eigenschaften

    Mayer, S., Appel, L., Cramer, H. & Clemens, H., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 227-232

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    The effect of Si on phase fractions and transition temperatures of a TiAl-Mo alloy: HASYLAB Annual Report

    Schmölzer, T., Mayer, S., Schwaighofer, E., Lippmann, T., Staron, P., Stark, A. & Clemens, H., 2010

    Research output: Non-textual form › Web publication/site › Research

  13. 2009
  14. Published

    Changes in Tempering and its Effect on Precipitation Behaviour in a Hot-work Tool Steel

    Mayer, S., Leitner, H., Scheu, C., Siller, I. & Clemens, H., 2009, In: Steel research international. 80, p. 89-95

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Correlation between heat treatment, microstructure and mechanical properties of a hot-work tool steel

    Mayer, S., Scheu, C., Leitner, H., Siller, I. & Clemens, H., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 86-91

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Einfluss einer bainitischen / martensitischen Mikrostruktur auf die mechanischen Eigenschaften von Warmarbeitsstählen

    Mayer, S., 2009

    Research output: Thesis › Doctoral Thesis

  17. Published

    Influence of alloying elements on the martensitic and bainitic structure of hot work Tool steels

    Siller, I., Mayer, S., Caliskanoglu, D. & Leitner, H., 2009, Proceedings of the 8th International Tooling Conference. p. 635-642

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. 2008
  19. Published

    Microstructure and Mechanical Properties of a Hot-work Tool Steel

    Mayer, S., Scheu, C., Leitner, H., Siller, I. & Clemens, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. 2007
  21. Published

    Gefügecharakterisierung eines Warmarbeitsstahls mit martensitisch-bainitschem Mischgefüge

    Mayer, S., Pölzl, S., Hawranek, G., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2007, In: Practical metallography = Praktische Metallographie. p. 182-192

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    “Influence of bainitic and martensitic microstructures on the mechanical properties of hot-work tool steels”

    Mayer, S., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Influence of the Cooling Rate on the Mechanical Properties of a Hot-work Tool Steel

    Mayer, S., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2007, In: Berg- und hüttenmännische Monatshefte : BHM. 152, p. 132-136

    Research output: Contribution to journal › Article › Research › peer-review

  24. 2006
  25. Published

    Gefügecharakterisierung eines Warmarbeitsstahls mit martensitisch-bainitischem Mischgefüge

    Mayer, S., Pölzl, S., Hawranek, G., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 379-385

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Influence of bainitic/martensitic microstructures on the mechanical properties of hot-work tool steels

    Mayer, S., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    Metallographische Präparation von dotiertem Tantal für licht- und rasterelektronenmikroskopische Mikrostrukturuntersuchungen

    Mayer, S., Pölzl, S., Hawranek, G., Bischof, M., Scheu, C., Clemens, H. & Knabl, W., 2006, In: Practical metallography = Praktische Metallographie. 43, p. 614-628

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    On the Development of Grain Growth Resistant Tantalum Alloys

    Bischof, M., Mayer, S., Leitner, H., Clemens, H., Staron, P., Geiger, E., Voiticek, A. & Knabl, W., 2006, In: International journal of refractory metals & hard materials. 24, p. 437-444

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Warmarbeitsstähle

    Mayer, S., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. 2005
  31. Published

    Microstructure and Mechanical Properties of Si and Y Doped Tantalum

    Bischof, M. A., Mayer, S., Leitner, H., Clemens, H., Pranzas, K., Staron, P., Dehm, G., Knabl, W., Voiticek, A. & Geiger, E., 2005, 16th International Plansee Seminar, (G. Kneringer, P. Rödhammer, H. Wildner, eds.). Plansee AG, p. 489-503

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Zur Entwicklung von kornwachstumsstabilisierten Tantaldrähten

    Mayer, S., Bischof, M. A., Leitner, H., Clemens, H., Voiticek, A. & Knabl, W., 2005, In: Berg- und hüttenmännische Monatshefte : BHM. 150, p. 246-250

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 Next
View graph of relations

Latest Research Output

View more (225)