Svea Mayer

(Former)

101 - 150 out of 225Page size: 50

Research output

  1. 2015
  2. Published

    Atom probe study of ωo phase in a β phase containing TiAl alloy

    Klein, T., Schachermayer, M., Mendez Martin, F., Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Poster › Research

  3. Published

    Decording the nanostructure of advanced TiAl alloys

    Schwaighofer, E., Staron, P., Rashkova, B., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2015, 2 p.

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    Enhancement of the application temperature of titanium aluminides

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 7, p. 342-345

    Research output: Contribution to journal › Article › Research

  5. Published

    Evolution of the ω-phase in a multi-phase TiAl alloy and its effect on hardness

    Rashkova, B., Klein, T., Schachermayer, M., Mendez Martin, F., Schöberl, T., Zhang, Z., Mayer, S. & Clemens, H., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  6. Published

    Grain growth and β to α transformation behavior of a β-solidifying TiAl alloy

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2015, In: Advanced engineering materials. 17, 6, p. 786-790

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    High temperature laser-scanning confocal microscopy for the in-situ investigation of grain growth and phase transformations in intermetallic γ-TiAl based alloys

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 5, p. 259-269

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Influence of discontinuous precipitation on the creep behavior of a ß-solidified γ-TiAl based alloy

    Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 5, p. 249-258

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    In-situ Charakterisierungsmethoden: Ein wichtiges Werkzeug bei der Entwicklung von intermetallischen Titanaluminiden

    Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  10. Published

    In-situ high-energy X-ray diffraction on an intermetallic ß-stabilised γ-TiAl based alloy

    Erdely, P., Stark, A., Clemens, H. & Mayer, S., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 5, p. 221-225

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    In-situ study of the time-temperature-transformation behaviour of a multi-phase intermetallic beta-stabilised TiAl alloy

    Erdely, P., Werner, R., Schwaighofer, E., Clemens, H. & Mayer, S., 2015, In: Intermetallics. 57, p. 17-24

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    In-situ study of the time-temperature-transformation behaviour of an intermetallic γ-TiAl based alloy

    Erdely, P., Werner, R., Schwaighofer, E., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  13. Published

    Intermetallische Titanaluminide als innovative Hochtemperaturleichtbau- werkstoffe – wie materialographische Methoden zu ihrer Entwicklung beigetragen haben

    Clemens, H. & Mayer, S., 2015, p. 19-28.

    Research output: Contribution to conference › Presentation › Research › peer-review

  14. Published

    Intermetallische Titanaluminide als innovative Hochtemperaturleichtbauwerkstoffe – wie materialographische Methoden zu ihrer Entwicklung beigetragen haben

    Clemens, H. & Mayer, S., 2015, Praktische Metallographie. Vol. Sonderband 47 . p. 19-28

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Intermetallische Titanaluminide als innovative Hochtemperaturleichtbauwerkstoffe – wie materialographische Methoden zu ihrer Entwicklung beigetragen haben

    Clemens, H. & Mayer, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 12, p. 691-720

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Metallography - A Powerful Instrument for Material Characterisation, Material Development and Failure Analysis

    Panzenböck, M., Hawranek, G., Mendez Martin, F., Mayer, S., Pölzl, S., Schütz, P., Primig, S., Rashkova, B. & Clemens, H., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  17. Published

    Microstructural characterization of intermetallic Mo-containing TiAl-Si alloys after high temperature deformation

    Godor, F., Werner, R., Lindemann, J., Mayer, S. & Clemens, H., 2015.

    Research output: Contribution to conference › Presentation › Research

  18. Published

    Microstructural evolution and grain refinement in an intermetallic titanium aluminide alloy with molybdenum content

    Rashkova, B., Spiradek-Hahn, K., Brabetz, M., Zhang, Z., Schöberl, T., Clemens, H. & Mayer, S., 2015, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 106, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Microstructure characterization of intermetallic γ-TiAl based alloys after high-temperature deformation

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 5, p. 239-248

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Oxidation protection of multiphase Mo-containing γ-TiAl-based alloys under cyclic test conditions

    Donchev, A., Pflumm, R., Galetz, M., Mayer, S., Clemens, H. & Schütze, M., 2015, Materials Research Society Symposium Proceedings Vol. 1760.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  21. Published

    Pulvermetallurgie von intermetallischen Titanaluminiden

    Mayer, S. & Clemens, H., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, p. 513 - 516 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Segregation of C and si in lamellar microstructures of β-solidifying γ-TiAl-based alloys

    Klein, T., Rashkova, B., Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  23. Published

    Stacking fault energies and the generalized stacking fault energy of γ-TiAl (ongoing Masterthesis)

    Dumitraschkewitz, P., Clemens, H., Mayer, S. & Holec, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  24. Published

    The role of metallography in the development and characterization of high-performance materials

    Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2015, In: Practical metallography = Praktische Metallographie. 52.2015, 2, p. 59-74 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    The use of atom probe tomography for the characterization and development of intermetallic γ-TiAl based alloys

    Klein, T., Schachermayer, M., Mendez Martin, F., Holec, D., Rashkova, B., Schöberl, T., Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  26. 2014
  27. Published

    Komplementäre Werkstoffcharakterisierung am Department Metallkunde und Werkstoffprüfung

    Mayer, S., Panzenböck, M. & Clemens, H., 6 Aug 2014, In: Dialog : Materialwissenschaft und Werkstofftechnik . p. 56-57

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Advanced intermetallic γ-TiAl based alloys with improved microstructural stability during creep

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  29. Published

    Advanced intermetallic γ-TiAl based alloys with improved microstructural stability during creep

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2014, Materials Research Society Symposium Proceedings Vol. 1760 Materials Research Society.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Alloying element distribution within the constituent phases of a C-containing γ-TiAl based alloy studied by atom probe tomography

    Klein, T., Mendez Martin, F., Schachermayer, M., Schöberl, T., Rashkova, B., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  31. Published

    Atomic relaxation processes in an intermetallic Ti-43Al-4Nb-1Mo-0.1B alloy studied by mechanical spectroscopy

    Juan, J. S., Simas, P., Schmölzer, T., Clemens, H., Mayer, S. & No, M. L., 2014, In: Acta materialia. 65, p. 338-350

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Constitutive analysis and microstructure evolution of the high-temperature deformation behavior of an advanced intermetallic multi-phase gamma-TiAl-based alloy

    Werner, R., Schwaighofer, E., Schloffer, M., Clemens, H., Lindemann, J. & Mayer, S., 2014, Advanced Materials Research. p. 807-812

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Constitutive analysis of the flow curve behavior of an intermetallic beta-solidifying gamma-TiAl-based alloy and microstructural characterization of the deformed state

    Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  34. Published

    Constitutive analysis of the flow curve behavior of an intermetallic beta-solidifying gamma-TiAl-based alloy and microstructural characterization of the deformed state

    Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 286-288

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Development status, applications and perspectives of advanced intermetallic titanium aluminides

    Clemens, H. & Mayer, S., 2014, Materials Science Forum. p. 15-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Die Rolle der Metallographie bei Entwicklung und Charakterisierung von Hochleistungswerkstoffen

    Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2014, Sonderbände der Praktischen Metallographie 46. p. 3-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Distribution of alloying elements within the constituent phases of a C-containing gamma-TiAl based alloy studied by atom probe tomography: Mater. Res. Soc. Symp. Proc. Vol.1760 2014 Materials Research Society

    Klein, T., Mendez Martin, F., Schachermayer, M., Rashkova, B., Clemens, H. & Mayer, S., 2014

    Research output: Non-textual form › Web publication/site › Research

  38. Published

    Effect of carbon addition on solidification behavior, phase evolution and creep properties of an intermetallic beta-stabilized gamma-TiAl based alloy

    Schwaighofer, E., Rashkova, B., Clemens, H., Stark, A. & Mayer, S., 2014, In: Intermetallics. 46, p. 173-184

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Einfluss der diskontinuierlichen Ausscheidung auf das Kriechverhalten einer beta-erstarrenden gamma-TiAl-Basislegierung

    Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 189-194

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Einfluss der diskontinuierlichen Ausscheidung auf das Kriechverhalten einer β-erstarrenden γ-TiAl-Basislegierung

    Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2014, p. 189-194.

    Research output: Contribution to conference › Presentation › Research › peer-review

  41. Published

    Evolution of the omega-phase in a beta-stabilized multi-phase TiAl alloy and its effect on the hardness

    Rashkova, B., Schloffer, M., Schöberl, T., Schwaighofer, E., Zhang, Z., Mayer, S. & Clemens, H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Evolution of the ordered omega phase in a beta-stabilized multi-phase TiAl alloy and its effect on hardness

    Schloffer, M., Rashkova, B., Schöberl, T., Schwaighofer, E., Zhang, Z., Clemens, H. & Mayer, S., 2014, In: Acta materialia. 64, p. 241-252

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Evolution of the ω-Phase in a β-stabilized multi-phase TiAl alloy and ist effect on the hardness

    Rashkova, B., Schloffer, M., Schöberl, T., Zhang, Z., Mayer, S. & Clemens, H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    First principles study on the impact of chemical disorder and Mo alloying on stability of the cubic b/bo phase in TiAl

    Holec, D., Legut, D., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  45. Published

    Fortschritte in der Metallographie 46

    Mayer, S. (Editor), Panzenböck, M. (Editor) & Clemens, H. (Editor), 2014, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  46. Published

    Fracture and R-curve behavior of an intermetallic β-stabilized TiAl alloy with different nearly lamellar microstructures

    Leitner, T., Schloffer, M., Mayer, S., Eßlinger, J., Clemens, H. & Pippan, R., 2014, In: Intermetallics. 53, p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Gefügecharakterisierung intermetallischer gamma-TiAl-Legierungen nach Hochtemperaturverformung

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 113-118

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Gefügecharakterisierung intermetallischer γ-TiAl-Legierungen nach Hochtemperaturverformung

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014, p. 113-118.

    Research output: Contribution to conference › Presentation › Research › peer-review

  49. Published

    High-temperature oxidation behavior of multi-phase Mo-containing gamma-TiAl-based alloys

    Pflumm, R., Donchev, A., Mayer, S., Clemens, H. & Schütze, M., 2014, In: Intermetallics. 53, p. 45-55

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Hochtemperatur Laser-Scanning Konfokal-Mikroskopie zur in-situ Untersuchung von Kornwachstum und Phasenumwandlungen in intermetallischen gamma-TiAl Legierungen

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 195-200

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Hot-working behavior of an advanced intermetallic multi-phase gamma-TiAl based alloy

    Schwaighofer, E., Clemens, H., Lindemann, J., Stark, A. & Mayer, S., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 614, p. 297-310

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    In-situ small-angle X-ray scattering study of the Perovskite-type carbide precipitation behavior in a carbon-containing intermetallic TiAl alloy using synchrotron radiation: DESY Annual Report 2013

    Schwaighofer, E., Staron, P., Rashkova, B., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2014

    Research output: Non-textual form › Web publication/site › Transfer

Previous 1 2 3 4 5 Next
View graph of relations

Latest Research Output

View more (225)