Stephan Schuschnigg
Research output
- 2023
- Published
Research Progress on Low-Pressure Powder Injection Molding
Momeni, V., Hufnagl, M., Shahroodi, Z., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C. & Holzer, C., Jan 2023, In: Materials. 16.2023, 1, 44 p., 379.Research output: Contribution to journal › Review article › peer-review
- Published
Validation Of Alternative Binders for Pellet Extrusion 3D Printing Of 316L Steels
de la Camacha, A. G., Tabares, E., Jiménez-Morales, A., Schsuchnigg, S., Kukla, C., Cano, S. & Gordo, E., 2023.Research output: Contribution to conference › Paper › peer-review
- 2022
- Published
Influence of Binder Composition and Material Extrusion (MEX) Parameters on the 3D Printing of Highly Filled Copper Feedstocks
Sadaf, M., Cano Cano, S., Gonzalez-Gutierrez, J., Bragaglia, M., Schuschnigg, S., Kukla, C., Holzer, C., Vály , L., Kitzmantel, M. & Nanni, F., 16 Nov 2022, In: Polymers / Molecular Diversity Preservation International. 14.2022, 22, 23 p., 4962.Research output: Contribution to journal › Article › Research › peer-review
- Published
In-situ alignment of 3D printed anisotropic hard magnets
Suppan, M., Huber, C., Mathauer, K., Abert, C., Bruckner, F., Gonzalez-Gutierrez, J., Schuschnigg, S., Groenefeld, M., Teliban, I., Kobe, S., Saje, B. & Suess, D., 20 Oct 2022, In: Scientific reports (London : Nature Publishing Group). 12.2022, October, 6 p., 17590.Research output: Contribution to journal › Article › Research › peer-review
- Published
Novel Additive Manufacturing Materials for Waste Heat Deduction
Schuschnigg, S., Hufnagl, M., Holzer, C., Eder, F., Kroke, E., Schallmeiner, S., Regula, C., Hamedi, Y., Grosche, C., Morganti, E. & Seidler, K., 29 Jul 2022, In: Advanced engineering materials. 2022, 10 p., 22006714.Research output: Contribution to journal › Article › Research › peer-review
- Published
Simulations of the filament printing of metal feedstocks with different nozzle designs
Schuschnigg, S., Hubmann, M., Cano Cano, S., Hentschel, L., Holzer, C. & Gonzalez-Gutierrez, J., 2022, Proceedings of the WorldPM 2022, Lyon.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- 2021
- Published
Effect of metal particle size and powder volume fraction on the filling performance of powder injection moulded parts with a microtextured surface
Ammosova, L., Cano Cano, S., Schuschnigg, S., Kukla, C., Mönkkönen, K., Suvanto, M. & Gonzalez-Gutierrez, J., Nov 2021, In: Precision Engineering. 72.2021, November, p. 604-612 9 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Extrusion and Additive Manufacturing
Schuschnigg, S., Hentschel, L., Cano Cano, S. & Momeni, V., 15 Sept 2021.Research output: Contribution to conference › Poster › Research
- Published
Material extrusion additive manufacturing of multi-material components
Cano Cano, S., Valy, L., Liu, D., Maurer, P., Ma, N., Czernilofsky, F., Schuschnigg, S., Sui, G., Kitzmantel, M., Kukla, C. & Gonzalez-Gutierrez, J., 15 Sept 2021, 29th Leoben-Conference on Polymer Engineering & Science. p. 184 1 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Thermal Conductive Polymer Compounds for Material Extrusion Additive Manufactured of Heat Sinks
Holzer, C., Schuschnigg, S. & Cano Cano, S., 15 Sept 2021, 29th Leoben-Conference on Polymer Engineering & Science. p. 250 1 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Tribological properties of extrusion based additive manufactured parts
Stiller, T., Hausberger, A., Schuschnigg, S., Höfle, W. & Schnetzinger, K., 15 Sept 2021, 29th Leoben-Conference on Polymer Engineering & Science. p. 252 1 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Thermal conductive, electrically insulating polymer compounds using material extrusion additive manufacturing for electronic parts
Holzer, C., Cano Cano, S., Schuschnigg, S. & Hentschel, L., 2 Sept 2021, p. 32-32. 1 p.Research output: Contribution to conference › Abstract
- Published
Powder content in powder extrusion moulding of tool steel: Dimensional stability, shrinkage and hardness
Gonzalez-Gutierrez, J., Thompson, Y., Handl, D., Cano Cano, S., Schuschnigg, S., Felfer, P., Kukla, C., Holzer, C. & Burkhardt, C., 15 Jan 2021, In: Materials letters. 283, January 2021, 5 p., 128909.Research output: Contribution to journal › Article › Research › peer-review
- Published
Effect of backbone selection on the solvent debinding of metal injection moulding feedstocks
Kukla, C., Cano, S., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 2021, Euro PM2021 Congress Proceedings. (Euro PM2021 Congress Proceedings).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- 2020
- Published
Additive Fertigung metallischer und keramischer Bauteile: Einsatz der Materialextrusion insbesondere der Verwendung von Filamenten für Sinterverfahren
Kukla, C., Schuschnigg, S. & Holzer, C., Aug 2020, In: Industrie 4.0 Management. 36.2020, 4, p. 20-24 5 p.Research output: Contribution to journal › Article › Research
- Published
Influence of the Infill Orientation on the Properties of Zirconia Parts Produced by Fused Filament Fabrication
Cano Cano, S., Lube, T., Huber, P., Gallego, A., Naranjo, J. A., Berges, C., Schuschnigg, S., Herranz, G., Kukla, C., Holzer, C. & Gonzalez-Gutierrez, J., 15 Jul 2020, In: Materials. 13.2020, 14, 19 p., 3158.Research output: Contribution to journal › Article › Research › peer-review
- Published
Qualifizierung von Materialien für medizinische Anwendungen mittels des Arburg Freeformers
Holzer, C., Hentschel, L., Kynast, F., Schuschnigg, S. & Gonzalez-Gutierrez, J., 15 May 2020. 2 p.Research output: Contribution to conference › Abstract
- Published
Modeling and Estimation of the Pressure and Temperature dependent Bulk Density of Polymers
Kneidinger, C., Längauer, M., Zitzenbacher, G., Schuschnigg, S. & Miethlinger, J., 24 Feb 2020, In: International polymer processing. 35.2020, 1, p. 70-82 13 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Polymer-bonded anisotropic SrFe12O19 filaments for fused filament fabrication
Huber, C., Cano Cano, S., Teliban, I., Schuschnigg, S., Groenefeld, M. & Suess, D., 12 Feb 2020, In: Journal of applied physics. 127.2020, 6, 8 p., 063904.Research output: Contribution to journal › Article › Research › peer-review
- 2019
- Published
Destroying or Enhancing the Mechanical Properties of Carbon Fibre Filled PA12 filaments for Additive Manufacturing?
Holzer, C., Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Arbeiter, F., Liu, D., Wuzella, G. H. & Lammer, H., 7 Nov 2019, p. 59-59. 1 p.Research output: Contribution to conference › Abstract › peer-review
