Stephan Schuschnigg

1 - 20 out of 126Page size: 20

Research output

  1. 2024
  2. Published

    CircularBioMat

    Schuschnigg, S. & Holzer, C., 21 Nov 2024, 32nd Leoben-Conference on Polymer Engineering and Science: New Materials - New Perspectives. Griesser, T. & Ladstätter, E. (eds.). Leoben, Vol. 13. p. 223

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Feedstock Development for Material Extrusion of Aluminium: Printability and Debinding

    Schuschnigg, S., Momeni, V. & Kukla, C., 21 Nov 2024, 32nd Leoben-Conference on Polymer Engineering and Science: New Materials New Perspectives. Leoben, Vol. 32. p. 132 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Supportless lattice structure of 316L stainless steel fabricated by material extrusion additive manufacturing: Effect of relative density on physical, microstructural and mechanical behaviour

    Parsompech, N., Suwanpreecha, C., Noraphaiphipaksa, N., Hararak, B., Songkuea, S., Schuschnigg, S., Kukla, C., Kanchanomai, C. & Manonukul, A., 14 Sept 2024, In: Materials Science and Engineering: A. 915.2024, November, 14 p., 147270.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Selecting the suitable thermoplastic elastomer as the main component in the feedstock for metal material extrusion of aluminium

    Momeni, V., Shahroodi, Z., Hufnagl, M., Gonzalez-Gutierrez, J., Duretek, I., Schuschnigg, S., Kukla, C. & Holzer, C., 8 Aug 2024, In: Results in Engineering. 23.2024, September, 12 p., 102692.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Binder System Composition on the Rheological and Magnetic Properties of Nd-Fe-B Feedstocks for Metal Injection Molding

    Momeni, V., Luca, S., Gonzalez-Gutierrez, J., Cano, S., Sueur, E., Shahroodi, Z., Schuschnigg, S., Kukla, C. & Holzer, C., Jul 2024, In: Applied Sciences (Switzerland). 14.2024, 13, 15 p., 5638.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Additive Manufacturing Material Extrusion @ Institute of Polymer Processing: Alf³

    Schuschnigg, S., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  8. Published

    Extrusion and Additive Manufacturing@ Institute of Polymer Processing

    Schuschnigg, S., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  9. Published

    Bio-Based Backbone for Highly Reactive Metal Alloys Feedstocks for MEX

    Holzer, C., Momeni, V., Pöhle, G., Riecker, S., Schuschnigg, S. & Kukla, C., 19 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  10. Published

    Simulation of the Melting Region in Additive Manufacturing Material Extrusion Dies for Highly Filled Feedstocks

    Schuschnigg, S., Hentschel, L. & Holzer, C., 19 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  11. Published

    Production of Permanent Magnets from Recycled NdFeB Powder with Powder Extrusion Moulding

    Rathfelder, S., Schuschnigg, S., Kukla, C., Holzer, C. & Burkhardt, C., 18 Apr 2024, In: Journal of Manufacturing and Materials Processing. 8.2024, 2, 19 p., 81.

    Research output: Contribution to journal › Article › Research › peer-review

  12. E-pub ahead of print

    Comparative analysis of binder systems in copper feedstocks for metal extrusion additive manufacturing and metal injection moulding

    Sadaf, M., Cano Cano, S., Bragaglia, M., Schuschnigg, S., Kukla, C., Holzer, C., Vály, L., Kukla, C., Kitzmantel, M., Nanni, F. & Gonzalez-Gutierrez, J., 21 Feb 2024, (E-pub ahead of print) In: Journal of Materials Research and Technology. 29.2024, March-April, p. 4433-4444 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Rapid tooling for rubber extrusion molding by digital light processing 3D printing with dual curable vitrimers

    Höller, R., Hrbinič, K., Reisinger, D., Alabiso, W., Schuschnigg, S., Fleisch, M., Waly, C., Rossegger, E. & Schlögl, S., 19 Feb 2024, In: Applied research. 3.2024, 4, 10 p., e202300133.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Development of Material and Processing Parameters for AM

    Ureña, J., Blasco, J. R., Jordá, O., Martínez, M., Portolés, L., Gonzalez-Gutierrez, J. & Schuschnigg, S., 2024, Springer Tracts in Additive Manufacturing. Springer Nature, p. 231-306 76 p. (Springer Tracts in Additive Manufacturing; vol. Part F3252).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  15. Published

    Introduction to Additive Manufacturing

    Godec, D., Pilipović, A., Breški, T., Ureña, J., Jordá, O., Martínez, M., Gonzalez-Gutierrez, J., Schuschnigg, S., Blasco, J. R. & Portolés, L., 2024, Springer Tracts in Additive Manufacturing. Springer Nature, p. 1-44 44 p. (Springer Tracts in Additive Manufacturing; vol. Part F3252).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  16. 2023
  17. Published

    Susmagpro

    Schuschnigg, S. & Kukla, C., 7 Sept 2023.

    Research output: Contribution to conference › Poster › Research

  18. Published

    Debinding And Sintering Strategies For Fused Filament Fabrication Of Aluminium Alloys

    Poehle, G., Quadbeck, P., Riecker, S., Kukla, C., Momeni, V. & Schuschnigg, S., Sept 2023, Euro Powder Metallurgy 2023 Congress & Exhibition.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Filament Development for Metallic Fused Filament Fabrication of Aluminium Alloys

    Kukla, C., Momeni, V., Poehle, G., Riecker, S. & Schuschnigg, S., Sept 2023, Euro Powder Metallurgy 2023 Congress & Exhibition.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Enhancing High-Pressure Capillary Rheometer Viscosity Data Calculation with the Propagation of Uncertainties for Subsequent Cross-Williams, Landel, and Ferry (WLF) Parameter Fitting

    Hubmann, M., Schuschnigg, S., Duretek, I., Groten, J. & Holzer, C., 24 Jul 2023, In: Polymers. 15.2023, 14, 21 p., 3147.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Effects of Different Polypropylene (PP)-Backbones in Aluminium Feedstock for Fused Filament Fabrication (FFF)

    Momeni, V., Shahroodi, Z., Gonzalez-Gutierrez, J., Hentschel, L., Duretek, I., Schuschnigg, S., Kukla, C. & Holzer, C., 11 Jul 2023, In: Polymers. 15.2023, 4, 18 p., 3007.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Multifunctional Ti3AlC2-Based Composites via Fused Filament Fabrication and 3D Printing Technology

    Liu, D., Hentschel, L., Lin, G., Kukla, C., Schuschnigg, S., Ma, N., Wallis, C., Momeni, V., Kitzmantel, M. & Sui, G., 25 Apr 2023, In: Journal of Materials Engineering and Performance. 32.2023, 20, p. 9174-9181 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 Next
View graph of relations

Contact

Phone: 3511

Latest Research Output

View more (126)