Stephan Laske

(Former)

1 - 50 out of 139Page size: 50

Research output

  1. 2016
  2. Published

    Effect of Compounding Method on Rheological, Thermal and Mechanical Behavior of Blast Furnace Slag Filled Polystyrene Compounds

    Mostafa, H., Pacher, G., Lucyshyn, T., Holzer, C., Flachberger, H., Krischey, E., Fritz, B. & Laske, S., 27 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  3. 2015
  4. Published

    Enhancing the temperature stability of PLA by compounding strategies

    Laske, S., Ziegler, W., Kainer, M., Wuerfel, J. & Holzer, C., 1 Dec 2015, In: Polymer engineering and science. 55, 12, p. 2849-2858 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Kinetics and mechanism of the biodegradation of PLA/clay nanocomposites during thermophilic phase of composting process

    Stloukal, P., Pekarova, S., Kalendova, A., Mattausch, H., Laske, S., Holzer, C., Chitu, L., Bodner, S., Maier, G., Slouf, M. & Koutny, M., 2015, In: Waste management. 42, p. 31-40 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. 2014
  7. Published

    Influence of processing conditions on the morphology of expanded perlite/polypropylene composites

    Mattausch, H., Laske, S., Cirar, K., Flachberger, H. & Holzer, C., 15 May 2014, AIP Conference Proceedings: PROCEEDINGS OF PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers. Nuremberg, Germany, Vol. 1593. p. 482-487

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Compounding of polymer nanocomposites

    Laske, S., 2014

    Research output: Thesis › Habilitation thesis › peer-review

  9. Published

    Effects of the polymeric niche on neural stem cell characteristics during primary culturing

    Katschnig, M., Haubenwallner, S., Fasching, U., Patz, S., Trattnig, C., Andraschek, N., Grünbacher, G., Absenger, M., Laske, S., Holzer, C., Balika, W., Bauer, G. & Schäfer, U., 2014, In: Journal of materials science / Materials in medicine.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Increase of the Thermal Stability of Polymers based on Renewable Resources

    Laske, S., Ziegler, W. & Holzer, C., 2014, Proceedings of the 30th Annual Meeting of the Polymer Processing Society. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Influence of cellulose fiber on the foaming behavior of a polypropylene copolymer

    Geissler, B., Laske, S., Uray, A., Holzer, C. & Langecker, G., 2014, Influence of cellulose fiber on the foaming behavior of a polypropylene copolymer. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Influence of different blowing and nucleating agents on the degassing pressure and the foam morphology of physically foamed polypropylene

    Geissler, B., Walluch, M., Laske, S., Holzer, C. & Langecker, G., 2014,

    Blowing Agents & Foaming Processes 2014

    .     p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    INFLUENCE OF MINERAL FILLERS ON THE FLAME RETARDANCY OF EXPANDABLE GRAPHITE / POLYPROPYLENE MATERIALS

    Mattausch, H., Laske, S., Hohenwarter, D. & Holzer, C., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    INFLUENCE OF MINERAL FILLERS ON THE FLAME RETARDANCY OF EXPANDABLE GRAPHITE / POLYPROPYLENE MATERIALS

    Mattausch, H., Laske, S., Hohenwarter, D. & Holzer, C., 2014, Proceedings of Antec 2014. p. 115-120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Influence of the Flow Channel Geometry on the Degassing Pressure in foam Extrusion

    Geissler, B., Schuschnigg, S., Laske, S., Macher, J., Holzer, C. & Langecker, G., 2014, Proceedings of the Technical Conference Exhibition. p. 2496-2499

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    NIR – spectroscopy: a sophisticated tool for process and quality control

    Witschnigg, A., Laske, S. & Holzer, C., 2014, NIR – spectroscopy: a sophisticated tool for process and quality control. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Strategies to improve the mechanical properties of high-density polylactic acid foams

    Geissler, B., Feuchter, M., Laske, S., Fasching, M., Holzer, C. & Langecker, G., 2014, In: Journal of Cellular Plastics [Elektronische Ressource]. p. 1-21

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Tailor-made high density pla foam sheets – strategies to improve the mechanical properties

    Geissler, B., Feuchter, M., Laske, S., Walluch, M., Holzer, C. & Langecker, G., 2014,

    Blowing Agents & Foaming Processes 2014

    .     p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Tailor-made high density PLA foam sheets – strategies to improve the mechanical properties

    Geißler, B., Feuchter, M., Laske, S., Walluch, M., Holzer, C. & Langecker, G., 2014, In: Cellular polymers. 33, p. 233-242

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Tailor-Made High Density PLA Foam Sheets - Strategies to Improve the Mechanical Properties

    Geissler, B., Feuchter, M., Laske, S., Walluch, M., Holzer, C. & Langecker, G. R., 2014, In: Cellular polymers. 33, 5, p. 249-257

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    The Effect of Mineral Fillers on the Rheological, Mechanical and Thermal Properties of Halogen-Free Flame-Retardant Polypropylene/Expandable Graphite Compounds

    Mattausch, H., Laske, S., Hohenwarter, D. & Holzer, C., 2014, Proceedings of PPS 30.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    The influence of a hydrolysis-inhibiting additive on the degradation and biodegradation of PLA and its nanocomposites

    Stloukal, P., Kalendova, A., Mattausch, H., Laske, S., Holzer, C. & Koutny, M., 2014, In: Polymer Testing.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Tribological Investigations of Polyamide Nanocomposites

    Witschnigg, A., Laske, S., Duretek, I., Holzer, C., Chitu, L. & Bodner, S., 2014, Proceedings of the 30th Annual Meeting of the Polymer Processing Society. p. 756-756

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Verwendung von Bohrloch-Cuttings als Füllstoff in Kunststoffen

    Holzer, C., Witschnigg, A., Laske, S., Kowalcyzk, D., Hofstätter, H. & Schulze, K., 2014, Tagungsband zur 12. DepoTech-Konferenz 2014. p. 431-434

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. 2013
  26. Published

    Fundemental Investigations of Reinforcement of Expanded Perlite in Polypropylene

    Mattausch, H., Laske, S., Cirar, K., Flachberger, H. & Holzer, C., 2013, New Developments in Polymer Composite Research. New York

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  27. Published

    Influence of Chain Extender on the Foaming Behavior and on the Mechanical Properteis of Physically Foamed PLA

    Mostafa, H., Geißler, B., Uray, A., Laske, S., Holzer, C. & Langecker, G., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    Influence of chain extender on the foaming behaviour and the mechanical properties of physically foamed PLA

    Geißler, B., Mostafa, H., Uray, A., Laske, S., Holzer, C. & Langecker, G., 2013, The 29th International Conference of The Polymer Processing Society (PPS-29). p. 120-125

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Influence of different fillers on the processing behaviour and mechanical properties of physically foamed polyethylene

    Geißler, B., Laske, S., Holzer, C. & Langecker, G., 2013, The 29th International Conference of The Polymer Processing Society (PPS-29). p. 129-134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Influence of Processing Conditions on the Morphology of Expanded Perlite/Polypropylene Composites

    Mattausch, H., Laske, S., Cirar, K., Flachberger, H. & Holzer, C., 2013, Proceedings. p. 123-128

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Influence of the shear rate and the nucleating agent on the degassing pressure in foam extrusion

    Geißler, B., Macher, J., Uray, A., Laske, S., Holzer, C. & Langecker, G., 2013,

    11th International Conference on Foam Materials & Technology

    .     p. 17-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Investigation of the influence of processing conditions on the thermal, rheological and mechanical behavior of polypropylene nanocomposites

    Mattausch, H., Laske, S., Duretek, I., Kreith, J., Maier, G. & Holzer, C., 2013, In: Polymer engineering and science. 53, p. 1001-1010

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Measuring the residence time distribution in a twin screw extruder with the use of NIR-spectroscopy

    Laske, S., Witschnigg, A., Selvasankar, R. K. & Holzer, C., 2013, In: Journal of Applied Polymer Science. 131, p. 39919-39924

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    New Developments in Polymer Composite Research

    Laske, S. (Co-editor) & Witschnigg, A. (Co-editor), 2013, New York, USA.

    Research output: Book/Report › Book › Research

  35. Published

    Pre-exfoliated layered silicates for next generation nanocomposites

    Laske, S., Mattausch, H., Flachberger, H., Ohrdorf, K.-H., Krischey, E., Rieß, G. & Holzer, C., 2013, The 29th International Conference of The Polymer Processing Society (PPS-29). p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Strategies to improve the mechanical properties of high density pla foam

    Geißler, B., Anna, U., Laske, S., Holzer, C. & Langecker, G., 2013,

    Tutorials & abstracts Biofoams 2013

    .     p. 234^-237

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. 2012
  38. Published

    Verfahren zur Herstellung eines synthetischen Papiers und damit hergestelltes Papier

    Laske, S. (Inventor), Friesenbichler, W. (Inventor), Langecker, G. (Inventor), Achatz, P. (Inventor) & Burkhalter, R. (Inventor), 15 Jan 2012, Patent No. A 28/2009

    Research output: Patent

  39. Published

    Characterization of polymer surfaces to optimize cell behavior

    Holzer, C., Katschnig, M., Laske, S., Kracalik, M., Balika, W., Schäfer, U. & Andraschek, N., 2012, In: Journal of tissue engineering and regenerative medicine. 6, p. 361-362

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Characterization of polymer surfaces to optimize cell behavior

    Holzer, C., Katschnig, M., Laske, S., Kracalik, M., Balika, W., Schäfer, U. & Andraschek, N., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    Chlorella algae – organic filler for tailor-made properties of polyolefins

    Piontek, M., Laske, S., Rieß, G. & Holzer, C., 2012, 9th WPC, Natural Fibre and other innovative Composites Congress and Exhibition. p. A10-1-A10-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Determining the ageing of polypropylene nanocomposites using rheological measurements

    Laske, S., Witschnigg, A., Mattausch, H., Kracalik, M., Pinter, G., Feuchter, M., Maier, G. & Holzer, C., 2012, In: Applied rheology. 22, 2, p. 24590-24614

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Effect of the mixture composition on shear and extensional rheology of recycled PET and ABS nanocomposites

    Kracalik, M., Laske, S., Witschnigg, A. & Holzer, C., 2012, In: Macromolecular Symposia. p. 33-40

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Effect of type and degree of layered silicates on mechanical properties and burning behavior of recycled ABS

    Piontek, M., Witschnigg, A., Laske, S., Kracalik, M. & Holzer, C., 2012,

    Program & Abstracts of PPS Americas Conference 2012

    .     p. 235-236

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Einfluss von Schichtsilkaten auf die Wärmeleitfähigkeit von polymeren Nanocomposites

    Laske, S., Witschnigg, A., Duretek, I., Mattausch, H., Tscharnutter, D. & Holzer, C., 2012, Mit Compoundieren zum Erfolg. p. 97-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Enhancement of PLA Property Profile using Nanoscaled Organoclays

    Holzer, C., Kracalik, M., Hirschenauer, M., Washüttl, M. & Laske, S., 2012,

    Progam Book & Compilation of Abstracts of International Conference on Nanotechnology 2012 (ICONT )

    .     p. 152-152

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Influence of induced shear work on the properties of polyolefine nanocomposite pipes

    Witschnigg, A., Laske, S., Kracalik, M. & Holzer, C., 2012, In: Polymer engineering and science. Volume 52, p. 1155-1160

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Influence of the degree of exfoliation on the thermal conductivity of polypropylene nanocomposites

    Laske, S., Duretek, I., Witschnigg, A., Mattausch, H., Tscharnuter, D. & Holzer, C., 2012, In: Polymer engineering and science. 52, p. 1479-1753

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Investigation of rheological, thermal and mechanical properties of expanded perlite/polypropylene composites

    Mattausch, H., Laske, S., Duretek, I., Cirar, K., Flachberger, H. & Holzer, C., 2012, The 28th International Conference of The Polymer Processing Society (PPS-28) Proceedings. p. 235-239

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Investigation of rheological, thermal and mechanical properties of expanded perlite/polypropylene composites

    Mattausch, H., Laske, S., Duretek, I., Cirar, K., Flachberger, H. & Holzer, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Keynote: The influence of nanostructures on cellular processes during differentiation of neuronal stem cells

    Schäfer, U., Haubenwallner, S., Katschnig, M., Holzer, C., Laske, S., Balika, W., Andraschek, N., Fasching, U. & Patz, S., 2012, Journal of Tissue Engineering and Regenerative Medicine. p. 83-83

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Kontinuierliche Schaumextrusion

    Laske, S., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  53. Published

    Nah-Infrarot Spektroskopie - Möglichkeiten der Qualitätskontrolle

    Witschnigg, A., Laske, S. & Holzer, C., 2012, Mit Compoundieren zum Erfolg. p. 69-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Neuer Ansatz für stoffliches Recycling von Altreifengummi

    Witschnigg, A., Laske, S. & Holzer, C., 2012, DepoTech 2012 Tagungsband. p. 353-358

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Properties of chlorella-algea reinforced polyolefin compounds

    Laske, S., Piontek, M., Rieß, G. & Holzer, C., 2012,

    Program & Abstracts of PPS Americas Conference 2012

    .     p. 216-217

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (139)