Stefan Luidold

1 - 100 out of 340Page size: 100

Research output

  1. 2025
  2. Published

    The catalytic effect of Ni in methane pyrolysis using molten SnNi alloys for hydrogen production

    Scheiblehner, D., Neuschitzer, D., Wibner, S., Sprung, A., Tunes, M. A., Leuchtenmüller, M., Scherr, C., Antrekowitsch, H. & Luidold, S., 14 Jan 2025, In: International Journal of Hydrogen Energy . 102.2025, 10 February, p. 1045-1054 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2024
  4. Published

    Unravelling nanometallurgy with in situ transmission electron microscopy: A case-study with copper nanowires

    Coradini, D. S. R., Tunes, M. A., Quick, C. R., Willenshofer, P., Kremmer, T., Luidold, S., Uggowitzer, P. & Pogatscher, S., Dec 2024, In: Nano today. 59.2024, December, 10 p., 102485.

    Research output: Contribution to journal › Article › Research › peer-review

  5. 2023
  6. Published

    Recycling of cemented carbides with gaseous zinc including particular consideration of GGI

    Luznik, L. T., Gerold, E., Luidold, S., Weirather, T., Pachlhofer, J., Czettl, C., Karhumaa, T. & Antrekowitsch, H., 12 Jun 2023, Proceedings of EMC 2023.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. 2022
  8. E-pub ahead of print

    Studies on the phase formation of cobalt contacted with zinc vapour

    Leitner, M., Winter, F., Gerold, E., Luidold, S., Storf, C., Czettl, C., Janka, L., Karhumaa, T. & Antrekowitsch, H., 22 Apr 2022, (E-pub ahead of print) In: International Journal of Refractory Metals and Hard Materials. 107.2022, September, 8 p., 105877.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Investigation of Melting Behavior and Viscosity of Slags from Secondary Ferromanganese Production

    Scheiblehner, D., Sagadin, C., Luidold, S., Antrekowitsch, H. & Offenthaler, D., 3 Feb 2022, Furnace Tapping, 2022. Steenkamp, J. D., Gregurek, D., Reynolds, Q. G., Alvear Flores, G., Joubert, H. & Mackey, P. J. (eds.). p. 311-324 14 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. 2021
  11. Published

    Separation and Efficient Recovery of Lithium from Spent Lithium-Ion Batteries

    Gerold, E., Luidold, S. & Antrekowitsch, H., 8 Jul 2021, In: Metals : open access journal . 11.2021, 7, 14 p., 1091.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Thermodynamic Refractory Corrosion Model for Ferronickel Manufacturing

    Sagadin, C., Luidold, S., Wagner, C., Pichler, C., Kreuzer, D., Spanring, A., Antrekowitsch, H., Clarke, A. & Clarke, K., 24 Feb 2021, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52.2021, 2, p. 1052-1060 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Contacting Cobalt with vaporous Zinc

    Leitner, M., Luidold, S., Ebner, T., Czettl, C. & Storf, C., 2021.

    Research output: Contribution to conference › Paper › peer-review

  14. Published

    Decomposition of hydrogen peroxide in selected organic acids

    Gerold, E., Luidold, S. & Antrekowitsch, H., 2021, Proceedings of EMC 2021.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Influence of the Cemented Carbides Composition on the Disintegration in Liquid Zinc

    Ebner, T., Luidold, S., Czettl, C. & Storf, C., 2021, Ni-Co 2021: The 5th International Symposium on Nickel and Cobalt. Anderson, C., Goodall, G., Gostu, S., Gregurek, D., Lundström, M., Meskers, C., Nicol, S., Peuraniemi, E., Tesfaye, F., Tripathy, P. K., Wang, S. & Zhang, Y. (eds.). p. 329-343 15 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. 2020
  17. Published

    Selective Precipitation of Metal Oxalates from Lithium Ion Battery Leach Solutions

    Gerold, E., Luidold, S. & Antrekowitsch, H., 29 Oct 2020, In: Metals : open access journal . 10.2020, 11, p. 1-15 15 p., 1435.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Development of a Hydrometallurgical Recycling Concept for Metal-containing Residues from the Battery Sector

    Gerold, E., Antrekowitsch, H., Luidold, S. & Honner, M., 29 Jul 2020, In: World of Metallurgy - ERZMETALL. 73, 4, p. 181 188 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Verbesserungspotential des pyrometallurgischen tantal-recyclingprozesses durch verwendung von additiven

    Hofer, D., Luidold, S., Lasch, T. & Bartmann, U., 1 Jul 2020, In: World of Metallurgy - ERZMETALL. 73.2020, 4, p. 189-195 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Fundamentals for the development of a hybrid process model

    Ebner, T., Körbler, N. & Luidold, S., 18 Jun 2020

    Research output: Book/Report › Commissioned report › Research

  21. Published

    Optimization of a leaching process for pulverized metal-containing residues

    Gerold, E., Luidold, S. & Antrekowitsch, H., 12 Jun 2020, 2019 Sustainable Industrial Processing Summit and Exhibition. Vol. 4. p. 65-72 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Pyrometallurgische Aufarbeitung von Zwischenprodukten beim Batterierecycling

    Gerold, E., Antrekowitsch, H., Luidold, S. & Bartelme, C., 2 Mar 2020, Recycling und Sekundärrohstoffe. Neuruppin, Vol. 13. p. 558-567 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Influence of Atmosphere on Melting Behaviour of Synthetic Slags from Ta Recycling

    Hofer, D., Luidold, S. & Bartmann, U., 27 Feb 2020, p. 931-940. 10 p.

    Research output: Contribution to conference › Paper › peer-review

  24. Published

    Layer Growth in Co(W)-Zn Systems at Hard Metal Recycling

    Koerbler, N., Ebner, T., Luidold, S., Antrekowitsch, H., Czettl, C., Storf, C., Clarke, A. & Clarke, K., 1 Feb 2020, In: JOM. 72, 2, p. 847-853 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Successful control of the reaction mechanism for semi-direct recycling of hard metals

    Kücher, G., Luidold, S., Czettl, C. & Storf, C., 1 Jan 2020, In: International Journal of Refractory Metals and Hard Materials. 86, 105131.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Studies on the Formation of Intermetallic Compound Layers in Co(W)–Zn Diffusion Couples: Siegmund, Alam et al. (Hg.) 2020 – PbZn 2020

    Ebner, T., Körbler, N., Luidold, S., Czettl, C. & Storf, C., 2020, p. 661-672.

    Research output: Contribution to conference › Paper

  27. 2019
  28. Published

    Leaching of Metal-Containing Residues from the Battery Sector

    Gerold, E., Luidold, S., Honner, M. & Antrekowitsch, H., 1 Sept 2019, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 72.2019, 5, p. 267-273 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Slag Metallurgy for Recycling of Tantalum

    Hofer, D., Luidold, S. & Beckmann, T., 1 Sept 2019, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 72.2019, 5, p. 274-280 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Synergy effect at the recycling of metal containing waste from the waste industry

    Gerold, E., Luidold, S., Honner, M. & Scheiber, S., 24 Jun 2019, European Metallurgical Conference EMC 2019. Düsseldorf, p. 973-982

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Slag metallurgy for recycling of Ta

    Hofer, D., Luidold, S. & Beckmann, T., 23 Jun 2019.

    Research output: Contribution to conference › Paper › peer-review

  32. Published

    Influence of CaO/SiO2/Al2O3 ratio on the melting behaviour of SynCon slags

    Hofer, D., Luidold, S. & Beckmann, T., 14 Mar 2019.

    Research output: Contribution to conference › Paper › peer-review

  33. 2018
  34. Published

    Conditioning of Spent Stripping Solution for the Recovery of Metals

    Ebner, T., Luidold, S., Honner, M., Antrekowitsch, H. & Czettl, C., 25 Sept 2018, In: Metals : open access journal . 8.2018, 10, 13 p., 757.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Influence of Substrate Properties on the Selective Leaching Performance of Cobalt from Cemented Carbides

    Kücher, G., Luidold, S., Czettl, C. & Storf, C., 25 Aug 2018, Proceedings of the First Global Conference on Extractive Metallurgy. p. 2829 2836 p. VII

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    First evaluation of semidirect recycling methods for the reclamation of cemented carbides based on a literature survey

    Kücher, G., Luidold, S., Czettl, C. & Storf, C., 20 Jul 2018, In: Revista matéria. 23.2018, 2, p. 1-7 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Editorial

    Luidold, S., 1 Jul 2018, In: World of Metallurgy - ERZMETALL. 71.2018, 4, p. 167-168 2 p.

    Research output: Contribution to journal › Editorial › peer-review

  38. Published

    Correlation of reduction conditions and MoO2 characteristics on the evolving Mo morphology during hydrogen reduction

    Bolitschek, J., Luidold, S. & O`Sullivan, M., 18 Jun 2018.

    Research output: Contribution to conference › Paper › peer-review

  39. Published

    Correlation of reduction conditions and MoO2 characteristics on the evolving Mo morphology during hydrogen reduction

    Bolitschek, J., Luidold, S. & O`Sullivan, M., 18 Jun 2018.

    Research output: Contribution to conference › Presentation › Research › peer-review

  40. Published

    A study of the impact of reduction conditions on molybdenum morphology

    Bolitschek, J., Luidold, S. & O'Sullivan, M., Feb 2018.

    Research output: Contribution to conference › Paper › peer-review

  41. Published

    Phase Reactions Between Refractory and High-Acidic Synthetic CaO-Ferronickel Slag

    Sagadin, C., Luidold, S., Wagner, C., Spanring, A. & Kremmer, T., Jan 2018, In: JOM. 70.2018, 1, p. 34-40 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Determination of the High Temperature Melting Behaviour of Synthetic Ferronickel Slags

    Sagadin, C., Luidold, S., Wagner, C. & Spanring, A., 2018, Sustainable Industrial Processing Summit & Exhibition: Non-ferrous Smelting & Hydro/Electrochemical Processing.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  43. Published

    High temperature characteristics of slags originating from the production of synthetic tantalum concentrate

    Hofer, D., Luidold, S., Beckmann, T. & Schulenburg, F., 2018.

    Research output: Contribution to conference › Paper › peer-review

  44. Published

    High temperature characteristics of slags originating from the production of synthetic tantalum concentrate

    Hofer, D., Luidold, S., Beckmann, T. & Schulenburg, F., 2018.

    Research output: Contribution to conference › Abstract › peer-review

  45. Published

    High Temperature Corrosion of Magnesia based Refractory by Ferronickel Slags

    Sagadin, C. & Luidold, S., 2018.

    Research output: Contribution to conference › Poster › Research

  46. Published

    High Temperature Phase Formation at the Slag/Refractory Interphase at Ferronickel Production

    Sagadin, C., Luidold, S. & Wagner, C., 2018.

    Research output: Contribution to conference › Paper › peer-review

  47. Published

    Hydrometallurgical Treatment of an Atomized Copper Alloy Gained from WEEE

    Sorger, C., Luidold, S. & Konetschnik, S. J., 2018, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 71.2018, 4, p. 208-213 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Influence of several Oxides on the Melting Behaviour of Ferronickel Slags

    Sagadin, C., Luidold, S., Wagner, C. & Spanring, A., 2018.

    Research output: Contribution to conference › Paper › peer-review

  49. Published

    Lixiviation kinetics of cobalt from cemented carbides

    Kücher, G., Luidold, S., Czettl, C. & Storf, C., 2018, In: International journal of refractory metals & hard materials. 70.2018, Supplement C, p. 239-245 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. 2017
  51. Published

    Ausgangsbedingungen und Verfahren für das Recycling von Wolframkarbid-Verbundwerkstoffen

    Ebner, T., Kerschbaumer, C., Kücher, G., Luidold, S., Storf, C., Czettl, C., Wolfe, T. & Smith, A., 5 Sept 2017, In: Österreichische Wasser- und Abfallwirtschaft : ÖWAW . 69.2017, 12, p. 482-494 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Leaching Behavior of Hard Metals used in Drilling Industry

    Kerschbaumer, C., Luidold, S., Wolfe, T. & Smith, A., 26 Jun 2017, p. 171-186. 16 p.

    Research output: Contribution to conference › Paper › peer-review

  53. Published

    Leaching kinetics for semi-direct recycling of drill bits

    Kerschbaumer, C., Luidold, S., Wolfe, T. & Smith, A., 29 May 2017, p. RC3/1-RC3/12. 12 p.

    Research output: Contribution to conference › Paper › peer-review

  54. Published

    Insights regarding the reaction rate of Co during the leaching of a hard metal substrate in hydrochloric media

    Kücher, G., Luidold, S., Czettl, C. & Storf, C., 28 May 2017.

    Research output: Contribution to conference › Poster › Research

  55. Published

    Insights regarding the reaction rate of Co during the leaching of a hard metal substrate in hydrochloric media

    Kücher, G., Luidold, S., Czettl, C. & Storf, C., 28 May 2017, International Conference on Refractory Metals and Hard Materials-Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Semi-direct recycling of cemented carbides in acid media

    Kücher, G. & Luidold, S., 12 May 2017.

    Research output: Contribution to conference › Poster › Research

  57. Published

    Comparative kinetics analysis of materials used in drill bits

    Kerschbaumer, C. & Luidold, S., 28 Apr 2017, 155 p.

    Research output: Book/Report › Commissioned report › Research

  58. Published

    Herausforderungen beim Recycling wolframhaltiger Schrotte

    Luidold, S., 6 Mar 2017, Recycling und Rohstoffe. Berlin, Vol. 10. p. 155-163

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Laugungsverhalten von Kupfer aus einer Elektro- und Elektroaltgerätefraktion

    Sorger, C., Luidold, S. & Konetschnik, S., 6 Mar 2017, Recycling und Rohstoffe. Berlin, Vol. 10. p. 391-404

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Disclosure of the Kinetic Relations of Semidirect Cemented Carbide Leaching in Acid Media

    Kücher, G., Luidold, S., Czettl, C. & Storf, C., 20 Feb 2017, Rare Metal Technology 2017. p. 159-165 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Thermodynamic and Experimental Investigations of High-Temperature Refractory Corrosion by Molten Slags

    Wagner, C., Wenzl, C., Gregurek, D., Kreuzer, D., Luidold, S. & Schnideritsch, H., 1 Feb 2017, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 48.2017, February, p. 119-131 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Arbeitsbereich Technologiemetalle: Grundlagen- und angewandte Forschung bezüglich der Gewinnung von Technologiemetallen aus Erzen sowie Sekundärrohstoffen (gebrauchte Artikel, Rückstände, Reststoffe, ...)

    Luidold, S., 2017.

    Research output: Contribution to conference › Poster › Research

  63. Published

    Evaluation of High Temperature Refractory Corrosion by Liquid Al2O3–Fe2O3–MgO–SiO2

    Sagadin, C., Luidold, S., Wenzl, C. & Wagner, C., 2017, 8th International Symposium on High-Temperature Metallurgical Processing. p. 161-168

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Extraktive Metallurgie von Technologiemetallen

    Luidold, S., 2017.

    Research output: Contribution to conference › Presentation › Research

  65. Published

    High Temperature Refractory Corrosion by Liquid Ferronickel Slags

    Sagadin, C. & Luidold, S., 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  66. Published

    Im Grenzflächenbereich: Bei der Suche nach geeigneten Recyclingverfahren für wolframhaltige Schrotte bestehen noch große Herausforderungen

    Luidold, S., 2017, In: ReSource. 2017, 3, p. 23 27 p.

    Research output: Contribution to journal › Article › Transfer

  67. Published

    Phase formation in Co(Ru)-Zn diffusion couples

    Ebner, T., Luidold, S., Antrekowitsch, H., Storf, C. & Czettl, C., 2017. 1 p.

    Research output: Contribution to conference › Poster › Research › peer-review

  68. Published

    Pyrometallurgical processing and slag analysis of waste electrical and electronic equipment

    Sorger, C. & Luidold, S., 2017.

    Research output: Contribution to conference › Paper › peer-review

  69. 2016
  70. Published

    Experimental study of refractory wear mechanisms caused by molten slag

    Wagner, C., Wenzl, C., Gregurek, D., Kreuzer, D., Luidold, S. & Schnideritsch, H., 2016, In: RHI bulletin : the journal of refractory innovations. 2016, 1, p. 62-67

    Research output: Contribution to journal › Article › Research

  71. Published

    High temperature corrosion mechanisms of refractories and ferralloy slags

    Luidold, S., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  72. Published

    High temperature corrosion mechanisms of refractories and ferro-alloy slags

    Luidold, S., Wenzl, C., Wagner, C. & Sagadin, C., 2016.

    Research output: Contribution to conference › Paper

  73. Published

    Melting behaviour of ferronickel slags

    Sagadin, C., Luidold, S., Wagner, C. & Wenzl, C., 2016, In: JOM. 68, 12, p. 3022-3028

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    New preparation and recycling procedure to recover rare earth elements from magnets by using a closed loop treatment

    Stuhlpfarrer, P., Luidold, S., Schnideritsch, H. & Antrekowitsch, H., 2016, In: Transactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy. 125, 4, p. 204-210

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Recycling of waste printed circuit boards with simultaneous enrichment of special metals by using alkaline melts: A green and strategically advantageous solution

    Stuhlpfarrer, P., Luidold, S. & Antrekowitsch, H., 2016, In: Journal of Hazardous Materials. 307, p. 17-25

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Thermodynamic and experimental investigation of high temperature refractory corrosion by molten slags

    Wagner, C., Wenzl, C., Gregurek, D., Kreuzer, D., Luidold, S. & Schnideritsch, H., 2016.

    Research output: Contribution to conference › Paper

  77. Published

    Thermodynamic Investigations for the Separation and Processing of different Metals from waste electrical and electronic equipment

    Sorger, C. & Luidold, S., 2016.

    Research output: Contribution to conference › Paper › peer-review

  78. Published

    Wärmekapazität von Salzschlacken

    Luidold, S., 2016

    Research output: Book/Report › Commissioned report › Research

  79. 2015
  80. Published

    Studie: Quantitative und qualitative Identifikation von relevanten sekundären Stoffströmen in Österreich: Endpräsentation

    Adam, J., Kapeller, J. & Luidold, S., 27 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  81. Published

    Kinetics and Optimization of Refractory Metal Alloy Oxidation and Sublimation

    Ratschbacher, K. & Luidold, S., 1 Nov 2015, In: Chemie-Ingenieur-Technik. 87, 11, p. 1558-1568 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Aktuelle Entwicklungstrends und zukünftige Herausforderungen im Bereich der Nichteisenmetallurgie

    Antrekowitsch, H., Luidold, S., Antrekowitsch, J., Pogatscher, S. & Steinlechner, S., 30 Oct 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160.2015, 11, p. 495-500 6 p.

    Research output: Contribution to journal › Article › Research

  83. Published

    Recycling technologies for rare earths

    Luidold, S., 9 Sept 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  84. Published

    Motivation und Aufgabenstellung im Bereich der Technologiemetalle

    Luidold, S., 3 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  85. Published

    Recycling of Nd2Fe14B magnets

    Stuhlpfarrer, P., Luidold, S. & Antrekowitsch, H., 1 Sept 2015, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 68, 5, p. 278-285 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Effects of pyrolysis on the metallurgical processing of waste electrical and electronic equipment

    Sorger, C., Stuhlpfarrer, P., Luidold, S. & Antrekowitsch, H., 15 Jun 2015, p. 819-831.

    Research output: Contribution to conference › Paper › peer-review

  87. Published

    Challenges in the field of extractive metallurgy of technological metals

    Luidold, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  88. Published

    Challenges in the field of extractive metallurgy of technological metals

    Luidold, S., 2015, p. 747-758. 12 p.

    Research output: Contribution to conference › Paper › peer-review

  89. Published

    Christian Doppler Labor für Extraktive Metallurgie von Technologiemetallen

    Luidold, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  90. Published

    Editorial

    Luidold, S., 2015, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 68.2015, 1, p. 1-2 2 p.

    Research output: Contribution to journal › Editorial

  91. Published

    Extraction of lanthanides from spent polishing agent

    Luidold, S., 2015, Rare Earths Industry: Technological, Economic, and Environmental Implications. 1 ed. Elsevier, p. 215 228 p. 14

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  92. Published

    Hydrometallurgische Aufarbeitung von Elektronikschrott - erster Überblick

    Sorger, C. & Luidold, S., 2015

    Research output: Book/Report › Commissioned report › Research

  93. Published

    Optimierung der pyrolytischen Vorbehandlung von Leiterplattenschrotten unter besonderer Betrachtung der Bromgewinnung

    Stuhlpfarrer, P., Luidold, S. & Antrekowitsch, H., 2015, Recycling und Rohstoffe. Neuruppin: TK-Verl., Vol. 8. p. 325 - 344 19 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Oxidation kinetics of a molybdenum-tantalum-alloy

    Ratschbacher, K. & Luidold, S., 2015, p. 771-782.

    Research output: Contribution to conference › Paper › peer-review

  95. Published

    Quantitative und qualitative Identifikation von relevanten sekundären Stoffströmen in Österreich: Industrielle Prozesse / Technologien

    Luidold, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  96. Published

    Quantitative und qualitative Identifikation von relevanten sekundären Stoffströmen in Österreich: Industrielle Prozesse / Technologien

    Luidold, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  97. Published

    Recycling of Nd2Fe14B Magnets

    Stuhlpfarrer, P., Luidold, S. & Antrekowitsch, H., 2015, p. 925-938. 13 p.

    Research output: Contribution to conference › Paper › peer-review

  98. 2014
  99. Published

    Recyclingkonzepte zur Rückgewinnung vonMassen- und Technologiemetallen aus E-Schrotten der Kategorie 3

    Stuhlpfarrer, P., Luidold, S. & Antrekowitsch, H., Jan 2014, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 67, 1, p. 28-37 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Auswirkungen der Pyrolyse von Elektronikschrotten auf die metallurgische Weiterverarbeitung

    Sorger, C., Stuhlpfarrer, P. & Luidold, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  101. Published

    Auswirkungen der Pyrolyse von Elektronikschrotten auf die metallurgische Weiterverarbeitung

    Sorger, C., Stuhlpfarrer, P., Luidold, S. & Antrekowitsch, H., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. 306-307

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Auswirkungen der Pyrolyse von Elektronikschrotten auf die metallurgische Weiterverarbeitung

    Sorger, C., Stuhlpfarrer, P., Luidold, S. & Antrekowitsch, H., 2014.

    Research output: Contribution to conference › Paper

  103. Published

    Detailuntersuchungen zum Aufschluss eines Poliermittels

    Poscher, A. & Luidold, S., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  104. Published

    Drehrohr Mo-Ta

    Ratschbacher, K. & Luidold, S., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  105. Published

    Extraction of lanthanides from spent polishing agent

    Poscher, A., Luidold, S., Schnideritsch, H. & Antrekowitsch, H., 2014, ERES 2014-1st European Rare Earth Resources Conference. p. 457-467

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  106. Published

    Kreislaufschließung beim Recycling von NiMH-Batterien

    Kaindl, M., Luidold, S. & Poscher, A., 2014, Recycling und Rohstoffe. p. 321-339

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  107. Published

    Optimierung des Recyclingsystems für "seltene" Metalle

    Luidold, S., 2014.

    Research output: Contribution to conference › Presentation › Research

  108. Published

    Oxidationskinetik Mo-Ta

    Ratschbacher, K. & Luidold, S., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  109. Published

    Recovery of metals from different secondary resources (waste)

    Luidold, S. & Antrekowitsch, H., 2014, Handbook of recycling: state-of-the-art for practitioners, analysts, and scientists. p. 255-268

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  110. Published

    Recovery Of Technology Metals From A WEEE-fraction

    Stuhlpfarrer, P., Luidold, S., Schnideritsch, H. & Antrekowitsch, H., 2014, Proc. of Shechtman International Symposium 2014. p. 000-000

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  111. Published

    Recyclingkonzepte für Photovoltaikmodule

    Benedek, L., Luidold, S., Schnideritsch, H. & Antrekowitsch, H., 2014, Recycling und Rohstoffe. p. 231-250

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  112. Published

    Recyclingkonzepte für Photovoltaikmodule

    Benedek, L., Luidold, S. & Antrekowitsch, H., 2014, p. 283-288.

    Research output: Contribution to conference › Paper

Previous 1 2 3 4 Next
View graph of relations

Contact

Phone: 5220

Latest Research Output

View more (340)