Sebastian Stieger

(Former)

1 - 22 out of 22Page size: 50

Research output

  1. 2021
  2. Published

    On the Influence of Viscoelastic Modeling in Fluid Flow Simulations of Gum Acrylonitrile Butadiene Rubber

    Stieger, S., Mitsoulis, E., Walluch, M., Ebner, C., Roman Christopher, K., Haselmann, M., Mostafaiyan, M., Kämpfe, M., Kühnert, I., Wießner, S. & Friesenbichler, W., 15 Jul 2021, In: Polymers. 13.2021, 14, 18 p., 2323.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Viscoelastic Modelling and Fluid Flow Simulations of Acrylonitrile Butadiene Rubber

    Stieger, S., Mitsoulis, E., Roman Christopher, K. & Friesenbichler, W., 28 Jun 2021.

    Research output: Contribution to conference › Abstract › peer-review

  4. 2020
  5. Published

    Ultra-High Through-Cure of (Meth) Acrylate Copolymers via Photofrontal Polymerization

    Ebner, C., Mitterer, J., Eigruber, P., Stieger, S., Rieß, G. & Kern, W., 1 Jun 2020, In: Polymers. 12, 6, 1291.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Entwicklung des Exjection Verfahrens für Kautschuke unter Berücksichtigung des viskoelastischen Materialverhaltens

    Stieger, S., 2020

    Research output: Thesis › Doctoral Thesis

  7. Published

    Viscoelastic Modelling of Polymer Melts and Rubber Compounds

    Friesenbichler, W., Stieger, S., Kerschbaumer, R. C., Berger-Weber, G., Neunhäuserer, A. & Mitsoulis, E., 2020, Advances in Polymer Processing 2020 Christian Hopmann Rainer Dahlmann Eds. Proceedings of the International Symposium on Plastics Technology. Springer Vieweg, p. 270-282 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. 2019
  9. Published

    Flow Visualization of Rubber Compounds

    Mitsoulis, E., Stieger, S., Roman Christopher, K. & Friesenbichler, W., 18 Nov 2019.

    Research output: Contribution to conference › Abstract › peer-review

  10. Published

    Contraction and Capillary Flow of a Carbon Black Filled Rubber Compound

    Stieger, S., Kerschbaumer, R. C., Mitsoulis, E., Fasching, M., Berger-Weber, G., Friesenbichler, W. & Sunder, J., 23 Oct 2019, In: Polymer engineering and science. 60.2020, 1, p. 32-43 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. E-pub ahead of print

    Comparison of steady-state and transient thermal conductivity testing methods using different industrial rubber compounds

    Kerschbaumer, R. C., Stieger, S., Gschwandl, M., Hutterer, T., Fasching, M., Lechner, B., Meinhart, L., Hildenbrandt, J., Schrittesser, B., Fuchs, P. F., Berger-Weber, G. & Friesenbichler, W., 26 Sept 2019, (E-pub ahead of print) In: Polymer Testing. 80.2019, December, p. 1-8 8 p., 106121.

    Research output: Contribution to journal › Article › Research

  12. Published

    Rheology and Capillary Flow Behavior of an HNBR Rubber Compound

    Mitsoulis, E., Stieger, S., Roman Christopher, K., Neunhäuserer, A. & Friesenbichler, W., 27 May 2019.

    Research output: Contribution to conference › Abstract › peer-review

  13. Published

    Flow Visualization of Rubber Compounds in Molding

    Stieger, S., Kerschbaumer, R. C., Mitsoulis, E., Fasching, M., Berger-Weber, G. & Friesenbichler, W., 14 May 2019, Conference book ERIF 2019. p. 42-57

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  14. Published

    Viscoelasticity and Processing of Rubber in Injection Molding with Cold Runner

    Friesenbichler, W., Stieger, S., Traintinger, M., Wolf, A. & Mitsoulis, E., 14 May 2019, Conference book ERIF 2019. p. 1-21

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  15. Published

    Viskoelastische Charakterisierung, Modellierung und Strömungssimulation hochgefüllter Kautschukmischungen

    Stieger, S., Roman Christopher, K., Berger-Weber, G. & Friesenbichler, W., 25 Apr 2019, 28. Leobener Kunststoff-Kolloquium: Simulation in der Kunststofftechnik. Leoben: Eigenverlag, Vol. 09. p. 78-88 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Thermal Conductivity Measurement of Industrial Rubber Compounds using Laser Flash Analysis: Applicability, Comparison and Evaluation.

    Gschwandl, M., Kerschbaumer, R. C., Schrittesser, B., Fuchs, P. F., Stieger, S. & Meinhart, L., 6 Feb 2019, In: AIP Conference Proceedings. 2065, 030041 (2019)

    Research output: Contribution to journal › Conference article › peer-review

  17. 2018
  18. Published

    Capillary Flow Behavior of a Rubber Compound

    Mitsoulis, E., Neunhäuserer, A., Stieger, S. & Friesenbichler, W., 7 Nov 2018.

    Research output: Contribution to conference › Abstract › peer-review

  19. Published

    Viscoelastic Material Characterization and Modelling of Industrial Rubber Compounds - K-BKZ Model

    Stieger, S., Kerschbaumer, R. C., Haselmann, M., Berger-Weber, G., Fasching, M., Duretek, I., Schuschnigg, S. & Friesenbichler, W., 7 Nov 2018.

    Research output: Contribution to conference › Abstract › peer-review

  20. Published

    A study on the Influence of Material Characterization Methods and Models on Rubber Injection Molding Simulation

    Stieger, S., Berger-Weber, G., Friesenbichler, W. & Fasching, M., 3 Jul 2018.

    Research output: Contribution to conference › Abstract › peer-review

  21. 2017
  22. Published

    A study on the optimization of thermal conductivity of HDPE using micro- and nanoscale fillers: Proceedings Europe Africa Conference 2017 of the POLYMER PROCESSING SOCIETY (PPS)

    Stieger, S., 22 Jun 2017.

    Research output: Contribution to conference › Poster › Research

  23. Published

    Verbesserung der Wärmeleitfähigkeit von HDPE durch Einsatz mikro- und nanoskaliger Füllstoffe

    Stieger, S., Berger, G., Battisti, M. & Friesenbichler, W., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 247-248 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Ausarbeitung und Bewertung werkstofflicher Recyclingkonzepte für thermoplastische Kunststoffe

    Stieger, S., 2017

    Research output: Thesis › Master's Thesis

  25. 2016
  26. Published

    Using elongational flow to enhance the properties of polypropylene nanocomposites

    Arunachalam, S., Battisti, M., Perko, L., Stieger, S. & Friesenbichler, W., 4 Aug 2016, In: SPE Plastics Research Online / Society of Plastic Engineers. 2016, 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Influence of elongational flow generating nozzles on material properties of polypropylene nanocomposites. Part I

    Battisti, M., Perko, L., Arunachalam, S., Stieger, S. & Friesenbichler, W., 2016, In: Polymer engineering and science. p. n/a-n/a

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Verbesserung von Wärmeleitfähigkeit und mechanischer Eigenschaften von HDPE durch mikro- und nanoskalige Füllstoffe

    Stieger, S., 2016

    Research output: Thesis › Master's Thesis

View graph of relations

Latest Research Output

View more (22)