Sabine Bodner

1 - 20 out of 23Page size: 20

Research output

  1. 2024
  2. Published

    Influence of increasing chromium content on additively manufactured tool steels: Microstructural and mechanical evolution before and after heat treatment

    Ofner, N., Bodner, S., Kunnas, P., Asci, A., Kutlesa, K., Stark, A., Höbenreich, P., Aumayr, C., Wu, L., Turk, C., Keckes, J. & Meindlhumer, M., 21 Dec 2024, In: Journal of Materials Research and Technology. 34.2025, January-February, p. 2715-2727 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Strong high-density composites from wheat straw

    Neudecker, F., Veigel, S., Bodner, S., Keckes, J., Duchoslav, J., Stifter, D. & Gindl-Altmutter, W., 18 Oct 2024, In: Composites Part A: Applied Science and Manufacturing. 188.2025, January, 11 p., 108533.

    Research output: Contribution to journal › Article › Research › peer-review

  4. E-pub ahead of print

    Comparing the properties of cellulose nanofibrils from wood and bark of Norway spruce (Picea abies KARST.) and silver poplar (Populus alba L.)

    Supriyadi, D., Bodner, S., Keckes, J., Gindl-Altmutter, W. & Veigel, S., 4 Jun 2024, (E-pub ahead of print) In: Carbohydrate polymer technologies and applications. 7.2024, June, 14 p., 100527.

    Research output: Contribution to journal › Article › Research › peer-review

  5. 2023
  6. Published

    The suitability of common reed (Phragmites australis) for load-bearing structural materials

    Albrecht, K., Neudecker, F., Veigel, S., Bodner, S., Keckes, J. & Gindl-Altmutter, W., Oct 2023, In: Journal of materials science. 58.2023, 39, p. 15411-15420 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Delignification and Densification as a Route to Enable the Use of Wheat Straw for Structural Materials

    Neudecker, F., Jakob, M., Bodner, S., Keckes, J., Buerstmayr, H. & Gindl-Altmutter, W., 4 May 2023, In: ACS Sustainable Chemistry and Engineering. 11.2023, 19, p. 7596-7604 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Analyse der Prozesskostenzusammensetzung bei der Herstellung additiv gefertigter, metallischer Bauteile in Kleinst- und Kleinserien durch pulverbettbasiertes Laserstrahlschmelzen

    Bodner, S. C., 12 Feb 2023, 103 p.

    Research output: Thesis › Master's Thesis

  9. Published

    Cross-Sectional Characterization of Functionally Graded Materials

    Bodner, S., 2023, 182 p.

    Research output: Thesis › Doctoral Thesis

  10. 2022
  11. Published

    Degradation of regenerated cellulose filaments by hydrogen chloride under aqueous and non-aqueous conditions

    Ungerer, B., Sulaeva, I., Bodner, S., Potthast, A., Keckes, J., Müller, U. & Veigel, S., Dec 2022, In: Carbohydrate polymer technologies and applications. 4.2022, December, 9 p., 100238.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Graded Inconel-stainless steel multi-material structure by inter- and intralayer variation of metal alloys

    Bodner, S., Hlushko, K., van de Vorst, L. T. G., Meindlhumer, M., Todt, J., Nielsen, M. A., Hooijmans, J. W., Saurwalt, J. J., Mirzaei, S. & Keckes, J., 19 Nov 2022, In: Journal of Materials Research and Technology. 21.2022, November-December, p. 4846-4859 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. E-pub ahead of print

    Effect of cold deformation on the stress corrosion cracking resistance of a high-strength stainless steel

    Truschner, M., Janda, A., Bodner, S. C., Keplinger, A. & Mori, G. K., 6 Nov 2022, (E-pub ahead of print) In: Journal of materials science. 57.2022, November, p. 20447–20461 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Local microstructural evolution and the role of residual stresses in the phase stability of a laser powder bed fused cold-work tool steel

    Platl, J., Bodner, S. C., Harald, L., Turk, C., Nielsen, M.-A., Keckes, J. & Schnitzer, R., 22 Sept 2022, In: Materials characterization. 193.2022, November, 11 p., 112318.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Influence of Hatch Strategy on Crystallographic Texture Evolution, Mechanical Anisotropy of Laserbeam Powder Bed Fused S316L Steel

    Bodner, S., Hlushko, K., Kutleša, K., Todt, J., Renk, O., Meindlhumer, M., Resch, F., Nielsen, M.-A., Keckes, J. & Eckert, J., 2 Aug 2022, In: Advanced engineering materials. 2022, 25 p., 2200524.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Cracking mechanism in a laser powder bed fused cold-work tool steel: The role of residual stresses, microstructure and local elemental concentrations

    Platl, J., Bodner, S. C., Hofer, C., Landefeld, A., Leitner, H., Turk, C., Nielsen, M.-A., Demir, A. G., Previtali, B., Keckes, J. & Schnitzer, R., 15 Feb 2022, In: Acta materialia. 225.2022, 15 February, 16 p., 117570.

    Research output: Contribution to journal › Article › Research › peer-review

  17. 2021
  18. Published

    Predicting strength of Finnish birch veneers based on three different failure criteria

    Pramreiter, M., Bodner, S. C., Keckes, J., Stadlmann, A., Feist, F., Baumann, G., Maawad, E. & Müller, U., 15 Mar 2021, In: Holzforschung. 75.2021, 9, p. 847-856 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Correlative cross-sectional characterization of nitrided, carburized and shot-peened steels: synchrotron micro-X-ray diffraction analysis of stress, microstructure and phase gradients

    Bodner, S. C., Meindlhumer, M., Ziegelwanger, T., Winklmayr, H., Hatzenbichler, T., Schindelbacher, C., Sartory, B., Krobath, M., Ecker, W., Schell, N. & Keckes, J., 3 Feb 2021, In: Journal of Materials Research and Technology. 11.2021, March-April, p. 1396-1410 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Zerstörungsfreie Charakterisierung von Furnieren für strukturelle Verbundwerkstoffe: Evaluierung von Methoden und Einflussfaktoren Maximilian

    Pramreiter, M., Bodner, S. C., Keckes, J., Stadlmann, A., Konnerth, J., Feist, F., Baumann, G., Huber, C. & Müller, U., 2021, In: Holztechnologie. 62.2021, 1, p. 5-18 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. 2020
  22. Published

    Structure and electrical resistivity of individual carbonised natural and man-made cellulose fibres

    Gindl-Altmutter, W., Czabany, I., Unterweger, C., Gierlinger, N., Xiao, N., Bodner, S. C. & Keckes, J., 7 May 2020, In: Journal of materials science. 55.2020, 23, p. 10271-10280 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Influence of Fiber Deviation on Strength of Thin Birch (Betula pendula Roth.) Veneers

    Pramreiter, M., Bodner, S. C., Keckes, J., Stadlmann, A., Kumpenza, C. & Müller, U., 1 Apr 2020, In: Materials. 13.2020, 7, 12 p., 1484.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Inconel-Steel Multilayers by Liquid Dispersed Metal Powder Bed Fusion: Microstructure, Residual Stress and Property Gradients

    Bodner, S. C., van de Vorst, L. T. G., Zalesak, J., Todt, J., Keckes, J., Maier-Kiener, V., Sartory, B., Schell, N., Hooijmans, J. W., Saurwalt, J. J. & Keckes, J., Mar 2020, In: Additive Manufacturing. 32.2020, March, 101027.

    Research output: Contribution to journal › Article › Research › peer-review

  25. 2019
  26. Published

    Cross-sectional gradients of residual stresses, microstructure and phases in a nitrided steel revealed by 20 µm synchrotron X-ray diffraction

    Bodner, S. C., Ziegelwanger, T., Meindlhumer, M., Holcova, J., Todt, J., Schell, N. & Keckes, J., Oct 2019, In: Metallurgia Italiana. 2019, 10, p. 7-11 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 Next
View graph of relations

Contact

Phone: 4207

Latest Research Output

View more (23)