Ronald Schnitzer

21 - 40 out of 141Page size: 20

Research output

  1. 2022
  2. Published

    Determination of the degree of recrystallization of a microalloyed HSLA steel by using metallographic methods

    Monschein, S., Kostwein, N., Ragger, K., Zügner, D., Fasching, J. & Schnitzer, R., 30 Jun 2022, In: Practical metallography = Praktische Metallographie. 59.2022, 6, p. 317-339 25 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Duplex heat treatment of a precipitation hardening carburising steel

    Böhle, S. I., Strobl, V., Lechleitner, J. & Schnitzer, R., 30 Jun 2022, In: HTM - journal of heat treatment and materials . 77.2022, 3, p. 197-213 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Potential Causes for Cracking of a Laser Powder Bed Fused Carbon-free FeCoMo Alloy

    Platl, J., Rainer, D., Leitner, H., Turk, C., Galbusera, F., Demir, A. G., Previtali, B. & Schnitzer, R., 18 May 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, July, p. 325-331 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Processability and cracking behaviour of novel high-alloyed tool steels processed by laser powder bed fusion

    Galbusera, F., Demir, A. G., Platl, J., Turk, C., Schnitzer, R. & Previtali, B., Apr 2022, In: Journal of materials processing technology. 302.2022, April, 17 p., 117435.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Influence of the Ti Content on the Grain Stability and the Recrystallization Behavior of Nb-Alloyed High-Strength Low-Alloyed Steels

    Monschein, S., Ragger, K., Zügner, D., Fasching, J. & Schnitzer, R., 30 Mar 2022, In: Steel research international. 93.2022, 5, 8 p., 2200094.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Cooling rate controlled aging of a Co-Free Fe-Ni-Cr-Mo-Ti-Al maraging steel

    Zeisl, S. & Schnitzer, R., 22 Mar 2022, In: Metals : open access journal . 12.2022, 4, 12 p., 538.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Cracking mechanism in a laser powder bed fused cold-work tool steel: The role of residual stresses, microstructure and local elemental concentrations

    Platl, J., Bodner, S. C., Hofer, C., Landefeld, A., Leitner, H., Turk, C., Nielsen, M.-A., Demir, A. G., Previtali, B., Keckes, J. & Schnitzer, R., 15 Feb 2022, In: Acta materialia. 225.2022, 15 February, 16 p., 117570.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Microstructural, chemical, and crystallographic investigations of dynamic strain‐induced ferrite in a microalloyed QT steel

    Monschein, S., Ragger, K., Fasching, J., Zügner, D. & Schnitzer, R., 10 Feb 2022, In: Materials. 12.2022, 2, 14 p., 313.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Consideration of critical aspects concerning large-scale production and use in automotive applications based on an optimized alloying concept for a batch-annealed medium-Mn780 grade

    Steineder, K., Krizan, D., Stadler, M., Ritsche, S., Berger, E., Holtmann, N., Schnitzer, R. & Schneider, R., 2022, Proceedings of the 5th Int. High Manganese Steel Conf.. p. 79-82

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Critical aspects concerning large-scale production of a batch-annealed medium-Mn 780 MPa grade for automotive applications

    Steineder, K., Krizan, D., Stadler, M., Ritsche, S., Berger, E., Holtmann, N., Schnitzer, R. & Schneider, R., 2022, 5th International High Manganese Steel Conference. p. 79-82

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    High-resolution characterization of precipitates in multi-layer submerged-arc welded 2.25Cr-1Mo-0.25V steel

    Fleißner-Rieger, H., Kremmer, T., Brabetz, M., Krein, R., Pahr, H., Peruzzi, M. & Schnitzer, R., 2022, In: Materials Today Communications. 31.2022, June, 11 p., 103299.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    How to increase scrap recycling

    Häuselmann, M., Rieger, J., Schenk, J., Schnitzer, R., Sakic, A., Michelic, S. K. & Cejka, J., 2022, In: Steel times international. 46.2022, 8*December, p. 34-38 5 p.

    Research output: Contribution to journal › Article › Research

  14. 2021
  15. Published

    On the impact of post weld heat treatment on the microstructure and mechanical properties of creep resistant 2.25Cr–1Mo–0.25V weld metal

    Schönmaier, H., Fleißner-Rieger, C., Krein, R., Schmitz-Niederau, M. & Schnitzer, R., Dec 2021, In: Journal of materials science. 56.2021, 36, p. 20208-20223 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Bending behavior of zinc-coated hot stamping steels

    Hofer, C., Stadler, M., Kurz, T., Maier-Kiener, V., Mayerhofer, A., Hebesberger, T. & Schnitzer, R., Oct 2021, In: Steel research international. 92, 10, p. 1-9 2100149.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Influence of Microalloying Elements and Deformation Parameters on the Recrystallization and Precipitation Behavior of Two Low-Alloyed Steels

    Monschein, S., Kapp, M., Zügner, D., Fasching, J., Landefeld, A. & Schnitzer, R., Sept 2021, In: Steel research international. 92.2021, 9, 9 p., 2100065.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Copper and its effects on microstructure and correlated tensile properties of super duplex stainless steels

    Ressel, G., Gsellmann, M., Brandl, D., Landefeld, A., Keplinger, A., Zhang, Z., Maier-Kiener, V. & Schnitzer, R., 21 Jul 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 821, 821, p. 1-11 141544.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Microstructure and Local Mechanical Properties of the Heat-Affected Zone of a Resistance Spot Welded Medium-Mn Steel

    Stadler, M., Schnitzer, R., Gruber, M., Steineder, K. & Hofer, C., 17 Jun 2021, In: Materials. 14.2021, 12, p. 1-13 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. E-pub ahead of print

    Influence of the Heat Input on the Dendritic Solidification Structure and the Mechanical Properties of 2.25Cr-1Mo-0.25V Submerged-Arc Weld Metal

    Schönmaier, H., Krein, R., Schmitz-Niederau, M. & Schnitzer, R., 14 Jun 2021, (E-pub ahead of print) In: Journal of Materials Engineering and Performance. 30.2021, 10, p. 7138-7151 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Microstructure and mechanical properties of partially ferritic Q&P steels

    Kickinger, C., Suppan, C., Hebesberger, T., Schnitzer, R. & Hofer, C., 20 May 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 815.2021, 20 May, 11 p., 141296.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Atom Probe Tomography of the Oxide Layer of an Austenitic Stainless CrMnN-Steel

    Monschein, S., Schnitzer, R., Fluch, R., Turk, C. & Hofer, C., 14 May 2021, In: Practical metallography = Praktische Metallographie. 58.2021, 5, p. 264-281 18 p.

    Research output: Contribution to journal › Article › Research

Previous 1 2 3 4 5 6 7 8 Next
View graph of relations

Contact

Phone: 4200

Latest Research Output

View more (141)