Ronald Schnitzer

1 - 50 out of 141Page size: 50

Research output

  1. 2025
  2. Published

    Effect of tramp elements on the microstructural evolution of a ferritic-pearlitic steel

    Hatzenbichler, L., Vincely, C., Haslberger, P., Galler, M., Glushko, O., Holec, D., Clemens, H. & Schnitzer, R., 21 Feb 2025, In: Practical metallography = Praktische Metallographie. 62.2025, 3, p. 148-175 28 p.

    Research output: Contribution to journal › Article › Research

  3. 2024
  4. Published

    Microstructural insights into the coarse‑grained heat‑affected zone of a high‑strength all‑weld metal: Development of a continuous cooling transformation diagram

    Schrittwieser, D., Marin Morales, D., Pahr, H., Lumper-Wimler, L., Glushko, O. & Schnitzer, R., 18 Dec 2024, In: Welding in the world. 69.2025, March, p. 813-823 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Revealing the embrittlement phenomena after post-weld heat treatment of high-strength weld metal using high-resolution microscopy

    Schrittwieser, D., Pahr, H., Musi, M., Landefeld, A., Glushko, O. & Schnitzer, R., 21 Oct 2024, In: Journal of Materials Research and Technology. 33.2024, November-December, p. 5289-5298 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Novel Fe-Mo intermetallic composite synthesized via diffusional-displacive mixed-mode transformation

    Varanasi, R. S., Srikakulapu, K., Utsumi, R., Saitoh, H., Schnitzer, R., Akiyama, E. & Koyama, M., 18 Aug 2024, In: Materials characterization. 216.2024, October, 10 p., 114287.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Interplay between alloying and tramp element effects on temper embrittlement in bcc iron: DFT and thermodynamic insights

    Reiners-Sakic, A., Schnitzer, R. & Holec, D., 27 May 2024, In: Acta materialia. 275.2024, 15 August, 12 p., 120044.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Effect of intercritical annealing on the microstructure and mechanical properties of a PH 13-8 Mo maraging steel

    Rosenauer, A., Teusl, S., Landefeld, A., Brandl, D., Ressel, G., Hönigmann, T., Stadler, M., Turk, C., Maawad, E., Stockinger, M. & Schnitzer, R., Mar 2024, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 895.2024, March, 13 p., 146220.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Multiscale in-situ observations of the micro- and nanostructure of a PH 13-8 Mo maraging steel during austenitization

    Rosenauer, A., Brandl, D., Ressel, G., Hönigmann, T., Stadler, M., Turk, C., Gammer, C., Wiessner, M., Gamsjäger, E., Stockinger, M. & Schnitzer, R., Feb 2024, In: Materials characterization. 208.2024, February, 13 p., 113554.

    Research output: Contribution to journal › Article › Research › peer-review

  10. 2023
  11. Published

    In Situ Observations of the Microstructural Evolution during Heat Treatment of a PH 13-8 Mo Maraging Steel

    Rosenauer, A., Brandl, D., Ressel, G., Lukas, S., Gruber, C., Stockinger, M. & Schnitzer, R., Jun 2023, In: Advanced engineering materials. 25.2023, 12, 12 p., 2300410.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Strengthening effect of NiAl and Ni3Ti precipitates in Co-free maraging steels

    Zeisl, S., Van Steenberge, N. & Schnitzer, R., 19 Apr 2023, In: Journal of materials science. 58.2023, April, p. 7149–7160 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Influence of platform preheating on in situ precipitation in an FeCoMo alloy during laser powder bed fusion

    Cui, C., Leitner, H., Platl, J. & Schnitzer, R., Mar 2023, In: Materials characterization. 197.2023, March, 10 p., 112689.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Intercritical annealing of a PH 13-8 Mo maraging steel

    Rosenauer, A., Brandl, D., Ressel, G., Stadler, M., Stockinger, M. & Schnitzer, R., 2023, 28th IFHTSE 2023 Congress. (28th IFHTSE 2023 Congress).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Precipitate evolution in an iron-based superalloy

    Jelinek, A., Renk, O., Juarez Perez, L., Platl, J. & Schnitzer, R., 2023.

    Research output: Contribution to conference › Poster › Research

  16. 2022
  17. Published

    Critical Aspects Concerning Large-scale Production of a Batch-annealed Medium-Mn 780 MPa Grade for Automotive Applications

    Steineder, K., Krizan, D., Stadler, M., Ritsche, S., Berger, E., Holtmann, N., Schnitzer, R. & Schneider, R., 18 Nov 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 11, p. 513-516 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    The role of alloying elements in NiAl and Ni3Ti strengthened Co-free maraging steels

    Zeisl, S., Landefeld, A., Van Steenberge, N., Chang, Y. & Schnitzer, R., 9 Nov 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 861.2022, 19 December, 9 p., 144313.

    Research output: Contribution to journal › Article › Research › peer-review

  19. E-pub ahead of print

    Hardness Loss of Plastic Mold Steels: Phenomenon in Injection Molding

    Zidar, D., Landefeld, A., Gschöpf, B., Schnitzer, R., Zunko, H. & Friesenbichler, W., 28 Sept 2022, (E-pub ahead of print) In: Steel research international. 2022, 11, 7 p., 2200326.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Hardness Loss of Plastic Mold Steels: Phenomenon in Injection Molding

    Zidar, D., Landefeld, A., Gschöpf, B., Schnitzer, R., Zunko, H. & Friesenbichler, W., 28 Sept 2022, In: Steel research international. 94.2022, 4, 7 p., 2200326.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Local microstructural evolution and the role of residual stresses in the phase stability of a laser powder bed fused cold-work tool steel

    Platl, J., Bodner, S. C., Harald, L., Turk, C., Nielsen, M.-A., Keckes, J. & Schnitzer, R., 22 Sept 2022, In: Materials characterization. 193.2022, November, 11 p., 112318.

    Research output: Contribution to journal › Article › Research › peer-review

  22. E-pub ahead of print

    Influence of delta ferrite on the impact toughness of a PH 13-8 Mo maraging steel

    Rosenauer, A., Brandl, D., Ressel, G., Lukas, S., Monschein, S., Stockinger, M. & Schnitzer, R., 19 Sept 2022, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 856.2022, 20 October, 11 p., 144024.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Ab initio study of alloying Impact on the stability of cementite in transformation-Induced plasticity-assisted advanced steels

    Sakic, A., Hofer, C., Schnitzer, R. & Holec, D., 18 Sept 2022, In: Advanced engineering materials. 24.2022, 11, 10 p., 2200532.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Effect of post weld heat treatment on the interplay of microstructure, precipitates and properties of creep-resistant 2.25Cr-1Mo-0.25V weld metal

    Fleißner-Rieger, H., Musi, M., Albu, M., Krein, R. & Schnitzer, R., 5 Jul 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 850.2022, 11 August, 11 p., 143550.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Determination of the degree of recrystallization of a microalloyed HSLA steel by using metallographic methods

    Monschein, S., Kostwein, N., Ragger, K., Zügner, D., Fasching, J. & Schnitzer, R., 30 Jun 2022, In: Practical metallography = Praktische Metallographie. 59.2022, 6, p. 317-339 25 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Duplex heat treatment of a precipitation hardening carburising steel

    Böhle, S. I., Strobl, V., Lechleitner, J. & Schnitzer, R., 30 Jun 2022, In: HTM - journal of heat treatment and materials . 77.2022, 3, p. 197-213 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Potential Causes for Cracking of a Laser Powder Bed Fused Carbon-free FeCoMo Alloy

    Platl, J., Rainer, D., Leitner, H., Turk, C., Galbusera, F., Demir, A. G., Previtali, B. & Schnitzer, R., 18 May 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, July, p. 325-331 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Processability and cracking behaviour of novel high-alloyed tool steels processed by laser powder bed fusion

    Galbusera, F., Demir, A. G., Platl, J., Turk, C., Schnitzer, R. & Previtali, B., Apr 2022, In: Journal of materials processing technology. 302.2022, April, 17 p., 117435.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Influence of the Ti Content on the Grain Stability and the Recrystallization Behavior of Nb-Alloyed High-Strength Low-Alloyed Steels

    Monschein, S., Ragger, K., Zügner, D., Fasching, J. & Schnitzer, R., 30 Mar 2022, In: Steel research international. 93.2022, 5, 8 p., 2200094.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Cooling rate controlled aging of a Co-Free Fe-Ni-Cr-Mo-Ti-Al maraging steel

    Zeisl, S. & Schnitzer, R., 22 Mar 2022, In: Metals : open access journal . 12.2022, 4, 12 p., 538.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Cracking mechanism in a laser powder bed fused cold-work tool steel: The role of residual stresses, microstructure and local elemental concentrations

    Platl, J., Bodner, S. C., Hofer, C., Landefeld, A., Leitner, H., Turk, C., Nielsen, M.-A., Demir, A. G., Previtali, B., Keckes, J. & Schnitzer, R., 15 Feb 2022, In: Acta materialia. 225.2022, 15 February, 16 p., 117570.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Microstructural, chemical, and crystallographic investigations of dynamic strain‐induced ferrite in a microalloyed QT steel

    Monschein, S., Ragger, K., Fasching, J., Zügner, D. & Schnitzer, R., 10 Feb 2022, In: Materials. 12.2022, 2, 14 p., 313.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Consideration of critical aspects concerning large-scale production and use in automotive applications based on an optimized alloying concept for a batch-annealed medium-Mn780 grade

    Steineder, K., Krizan, D., Stadler, M., Ritsche, S., Berger, E., Holtmann, N., Schnitzer, R. & Schneider, R., 2022, Proceedings of the 5th Int. High Manganese Steel Conf.. p. 79-82

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Critical aspects concerning large-scale production of a batch-annealed medium-Mn 780 MPa grade for automotive applications

    Steineder, K., Krizan, D., Stadler, M., Ritsche, S., Berger, E., Holtmann, N., Schnitzer, R. & Schneider, R., 2022, 5th International High Manganese Steel Conference. p. 79-82

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    High-resolution characterization of precipitates in multi-layer submerged-arc welded 2.25Cr-1Mo-0.25V steel

    Fleißner-Rieger, H., Kremmer, T., Brabetz, M., Krein, R., Pahr, H., Peruzzi, M. & Schnitzer, R., 2022, In: Materials Today Communications. 31.2022, June, 11 p., 103299.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    How to increase scrap recycling

    Häuselmann, M., Rieger, J., Schenk, J., Schnitzer, R., Sakic, A., Michelic, S. K. & Cejka, J., 2022, In: Steel times international. 46.2022, 8*December, p. 34-38 5 p.

    Research output: Contribution to journal › Article › Research

  37. 2021
  38. Published

    On the impact of post weld heat treatment on the microstructure and mechanical properties of creep resistant 2.25Cr–1Mo–0.25V weld metal

    Schönmaier, H., Fleißner-Rieger, C., Krein, R., Schmitz-Niederau, M. & Schnitzer, R., Dec 2021, In: Journal of materials science. 56.2021, 36, p. 20208-20223 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Bending behavior of zinc-coated hot stamping steels

    Hofer, C., Stadler, M., Kurz, T., Maier-Kiener, V., Mayerhofer, A., Hebesberger, T. & Schnitzer, R., Oct 2021, In: Steel research international. 92, 10, p. 1-9 2100149.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Influence of Microalloying Elements and Deformation Parameters on the Recrystallization and Precipitation Behavior of Two Low-Alloyed Steels

    Monschein, S., Kapp, M., Zügner, D., Fasching, J., Landefeld, A. & Schnitzer, R., Sept 2021, In: Steel research international. 92.2021, 9, 9 p., 2100065.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Copper and its effects on microstructure and correlated tensile properties of super duplex stainless steels

    Ressel, G., Gsellmann, M., Brandl, D., Landefeld, A., Keplinger, A., Zhang, Z., Maier-Kiener, V. & Schnitzer, R., 21 Jul 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 821, 821, p. 1-11 141544.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Microstructure and Local Mechanical Properties of the Heat-Affected Zone of a Resistance Spot Welded Medium-Mn Steel

    Stadler, M., Schnitzer, R., Gruber, M., Steineder, K. & Hofer, C., 17 Jun 2021, In: Materials. 14.2021, 12, p. 1-13 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. E-pub ahead of print

    Influence of the Heat Input on the Dendritic Solidification Structure and the Mechanical Properties of 2.25Cr-1Mo-0.25V Submerged-Arc Weld Metal

    Schönmaier, H., Krein, R., Schmitz-Niederau, M. & Schnitzer, R., 14 Jun 2021, (E-pub ahead of print) In: Journal of Materials Engineering and Performance. 30.2021, 10, p. 7138-7151 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Microstructure and mechanical properties of partially ferritic Q&P steels

    Kickinger, C., Suppan, C., Hebesberger, T., Schnitzer, R. & Hofer, C., 20 May 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 815.2021, 20 May, 11 p., 141296.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Atom Probe Tomography of the Oxide Layer of an Austenitic Stainless CrMnN-Steel

    Monschein, S., Schnitzer, R., Fluch, R., Turk, C. & Hofer, C., 14 May 2021, In: Practical metallography = Praktische Metallographie. 58.2021, 5, p. 264-281 18 p.

    Research output: Contribution to journal › Article › Research

  46. Published

    Improving the mechanical performance of a resistance spot welded 1200 MPa TBF steel

    Stadler, M., Schnitzer, R., Gruber, M. & Hofer, C., 1 Apr 2021, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 112.2021, 4, p. 262-270 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Influence of partitioning parameters on the mechanical stability of austenite in a Q&P steel: A comparative in-situ study

    Ebner, S., Schnitzer, R., Maawad, E., Suppan, C. & Hofer, C., Mar 2021, In: Materialia. 15.2021, March, 10 p., 101033.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    マルエイジング鋼から物品を製造する方法

    シュニッツァーロナルド (Inventor) & ライトナーハラルド (Inventor), 22 Feb 2021, IPC No. C22C 38/ 50 A I, Patent No. JP2021507109, Priority date 19 Dec 2018, Priority No. WO2018EP85765

    Research output: Patent

  49. Published

    Influence of the cooling time on the microstructural evolution and mechanical performance of a double pulse resistance spot welded Medium-Mn steel

    Stadler, M., Schnitzer, R., Gruber, M., Steineder, K. & Hofer, C., 5 Feb 2021, In: Metals : open access journal . 11.2021, 2, p. 1-11 11 p., 270.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Influence of thermomechanical fatigue loading conditions on the nanostructure of secondary hardening steels

    Hofinger, M., Seisenbacher, B., Landefeld, A., Ognianov, M., Turk, C., Leitner, H. & Schnitzer, R., 20 Jan 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 802.2021, 20 January, 11 p., 140672.

    Research output: Contribution to journal › Article › Research › peer-review

  51. 2020
  52. Published

    METHOD FOR PRODUCING AN ARTICLE FROM A MARAGING STEEL

    Schnitzer, R. (Inventor) & Leitner, H. (Inventor), 17 Dec 2020, IPC No. C22C 38/ 50 A I, Patent No. US2020392593, Priority date 19 Dec 2018, Priority No. WO2018EP85765

    Research output: Patent

  53. Published

    Diffusion Bonding of High-Alloyed Tool Steels with Maraging and Precipitation Hardening Steels

    Göbl, M., Eder, H., Prestl, A., Siller, I. & Schnitzer, R., 2 Dec 2020, In: Metals : open access journal . 10, 12, p. 1-11 11 p., 1622.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    VERFAHREN ZUM HERSTELLEN EINES GEGENSTANDS AUS EINEM MARAGING-STAHL

    Schnitzer, R. (Inventor) & Leitner, H. (Inventor), 28 Oct 2020, IPC No. C22C 38/ 50 A I, Patent No. EP3728674, Priority date 19 Dec 2018, Priority No. WO2018EP85765

    Research output: Patent

  55. E-pub ahead of print

    Defects in a laser powder bed fused tool steel

    Platl, J., Leitner, H., Turk, C., Demir, A. G., Previtali, B. & Schnitzer, R., 13 Oct 2020, (E-pub ahead of print) In: Advanced engineering materials. 2020, 2000833, 11 p., 2000833 .

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Study on inclusion evolution through Si/Mn deoxidation in medium-carbon steels

    Kirchheimer, K., Schnitzer, R., Klösch, G., Fasching, J., Bernhard, C. & Michelic, S., 3 Sept 2020, Proceedings of the Iron and Steel Technology Conference, AISTech 2020. p. 1491-1502 12 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 Next
View graph of relations

Contact

Phone: 4200

Latest Research Output

View more (141)