Reinhold Lang

(Former)

151 - 200 out of 365Page size: 50

Research output

  1. 2006
  2. Published

    Characterisation of the Fatigue Behavior of Elastomer Composites

    Major, Z., Kovacevic, Z., Kosir, M., Mesec, A. & Lang, R., 2006, 5th International Conference on Mechanics and Materials in Design. INEGI-Instituto de Engenharia Mecânica e Gestão Industrial, p. 391-392

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Characterisation of the fatigue behavior of elastomers and elastomer Composite

    Major, Z., Feichter, C., Kovacevic, Z. & Lang, R., 2006, 1. Leobner Betriebsfestigkeitstage 2006. Montanuniversität Leoben, Lehrstuhl für Allgemeinen Maschinenbau, p. 265-277

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Characterization of the Mechanical Behavior of Polyetheretherketone (PEEK)

    Major, Z. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  5. Published

    Characterization of the tensile fatigue behaviour of RTM-laminates by isocyclic stress-strain diagrams

    Pinter, G., Ladstätter, E., Billinger, W. & Lang, R., 2006, In: International Journal of Fatigue. p. 1277-1283

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Charakterisierung des Oberflächenerscheinungsbildes organisch bandbeschichteter Stahlbleche für Automobilanwendungen

    Gruber, D., Wallner, G., Buder-Stroisznigg, M., Strauß, B., Jandel, L. & Lang, R., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 205-208

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Charakterisierung von Epoxidharzwerkstoffen

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  8. Published

    Comparison between time-independent FE-Simulation and measurements for two types of rubber

    Feichter, C., Major, Z. & Lang, R., 2006, 5th International Conference on Mechanics and Materials in Design. INEGI-Instituto de Engenharia Mecânica e Gestão Industrial, p. 523-524

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Compression / Inplane Shear Tests

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  10. Published

    Control of the resin transfer moulding process using dielectric and thermal analysis

    Wolfahrt, M., Pilz, G., Lang, R. & Ladstätter, E., 2006, Latest advancements of applied composite technology: SAMPE Europe 27th international conference, March 27th - 29th, 2006, Paris EXPO, Porte de Versailles ; proceedings. p. 309-313

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Deformation analysis of notched rubber specimens

    Feichter, C., Major, Z. & Lang, R., 2006, In: Strain. p. 299-304

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Development of a test and fatigue analysis methodology for elastomeric seals exposed to explosive decompression

    Major, Z., Lederer, K., Moitzi, M., Mitterhuber, M., Schwarz, T. & Lang, R., 2006, Development of a test and fatigue analysis methodology for elastomeric seals exposed to explosive decompression. p. 1-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    DSC-Analyse eines vernetzten Gießharzes

    Wallner, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    DSC-Untersuchungen an PE-HD Bauteilen

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  15. Published

    Dynamische-mechanische Analyse (DMA) von Thermoplasten

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Dynamisch-mechanische Untersuchungen und Kriechversuche an Elastomerwerkstoffen

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    Effect of artificial defects on the fatigue behavior of RTM laminates

    Pinter, G., Ladstätter, E. & Lang, R. W., 2006, p. 133-137. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  18. Published

    Effect of artificial defects on the fatigue behaviour of RTM laminates

    Pinter, G., Ladstätter, E. & Lang, R., 2006, ANTEC 2006. p. 133-137

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Ermüdungsversuche an Laminaten

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Fatigue crack growth and process zone development in a PE-HD pipe grade in through-thickness direction

    Balika, W., Pinter, G. & Lang, R., 2006, In: Advanced engineering materials. p. 1146-1150

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Flatwise Tension Test an Aluminiumkernverbunden

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Heat deflection temperature of neat resins HPM001, HPM002 and HPM054

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Impact Tensile Characterization of Polytron-GRF

    Steinberger, R. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Influence of Annealing on the Fracture Behavior of 200 µm Thick a-PVDF Films

    Wallner, G., Major, Z., Maier, G. & Lang, R., 2006, In: Advanced engineering materials. 8, p. 1140-1145

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Influence of the curing degree on key resin properties of high Tg epoxy resins for composites

    Wolfahrt, M., Pilz, G., Lang, R., Eugen, R., Krumlacher, W. & Plessing, A. K., 2006, proceedings: SAMPE-EUROPE 2006, Paris, F.. p. 314-319

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Influence of the curing degree on modulus, glass transition temperature and fracture energy of two epoxy resins for composites

    Wolfahrt, M., Pilz, G. & Lang, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    Infrared thermographic techniques for non-destructive damage characterization of carbon fibre reinforced polymers during tensile fatigue testing

    Steinberger, R., Leitao, T. I. V., Ladstätter, E., Billinger, W., Pinter, G. & Lang, R., 2006, In: International Journal of Fatigue. p. 1340-1347

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    IR-spektroskopische Analysen an coextrudierten Rohrmustern

    Balika, W. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Kunststoffe - Neue Möglichkeiten in der Solarthermie

    Wallner, G. & Lang, R., 2006, In: Erneuerbare Energie. p. 10-12

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Materialanalyse an extrudierten Verpackungsfolien

    Wallner, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    Materialvergleich für Schiebedeckeln von Kühltruhen

    Steinberger, R. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    Mechanische und thermoanalytische Tests an Composite Laminaten

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    Moisture absorption of liner resins

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Polymeric Materials for Sustainable Development - WP Report "Polymere Nanocomposites für die Solartechnik"

    Gruber, D., Wallner, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    Polymeric Materials for Sustainable Development - WP Report "Symposium/IEA-Task “Materialien für die Solartechnik”"

    Wallner, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  36. Published

    Prüfungs- und Versagensanalyse für die explosive Dekompression elastomerer Dichtungen

    Major, Z., Lederer, K., Moitzi, M., Mitterhuber, M., Schwarz, T. & Lang, R., 2006, In: GAK : Gummi, Fasern, Kunststoffe. p. 685-694

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Ranking of PE pipe grades by cyclic crack growth tests with cracked round bar specimens

    Pinter, G., Haager, M. J. & Lang, R., 2006, ANTEC 2006. p. 2475-2479

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Ranking of polyethylene pipe materials using fatigue loading of cracked round bar specimens

    Haager, M. J., Pinter, G., Balika, W. & Lang, R., 2006, Plastics Pipes XIII. Plastics Pipes Conference Association, p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Ranking of Polyethylene pipe materials using fatigue loading of cracked round bar specimens

    Haager, M. J., Pinter, G., Balika, W. & Lang, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  40. Published

    Rauigkeitsmessungen an unterschiedlichen Kunststofffolien

    Balika, W. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Tensile, Bending and Charpy Tests for GF-UP Materials W1 and W2

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Tensile, Bending and Charpy Tests for Hybrid Materials W32 and W42

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Tensile tests for neat resin and calciumcarbon-ate filled resin formulations of Distitron 412 V2

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Test and failure analyses methodology for elastomeric seals exposed to explosive decompression

    Major, Z., Lederer, K., Moitzi, M., Mitterhuber, M., Schwarz, T. & Lang, R., 2006, In: Rubber, fibres, plastics international. p. 93-100

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    The Test Frequency dependence of the fatigue behavior of elastomers

    Major, Z., Feichter, C., Steinberger, R. & Lang, R., 2006, Fracture of Nano and Engineering Materials. Springer, p. 777-784

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Trommelschälversuch an Aluminiumkernverbunden

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Untersuchungen an Polypropylen für eine Beizbeckenanwendung

    Balika, W. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Vergleichende Untersuchungen flächen- und kalandergeprägter PET-Laminatfolien

    Wallner, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Zugversuche an Kunststoffketten

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Zugversuche an PET-Verpackungsbändern

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Zugversuche an stumpfgeschweißten Polyethylenrohren nach EN 12814-2

    Haager, M. J. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1 2 3 4 5 6 7 8 Next
View graph of relations

Latest Research Output

View more (365)