Reinhold Lang

(Former)

201 - 300 out of 365Page size: 100

Research output

  1. 2006
  2. Published

    Zugversuch und Härteprüfung an Silikonelastomeren

    Wallner, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  3. 2005
  4. Published

    Adaptierung der prüftechnischen Einrichtungen zur mechanischen Prüfung von Klebstoffverbindungen

    Lang, R., Pilz, G. & Wolfahrt, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  5. Published

    Aging and aging mechanism of functional polymers for optical applications - WP Report "Untersuchungen an funktionalen Polyolefinen – Teil2 (DA Eder)"

    Wallner, G., Eder, R. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  6. Published

    Aging of polymeric films for transparent insulation wall applications

    Wallner, G. & Lang, R., 2005, In: Solar energy. 79, p. 603-611

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Anforderungsprofil für kalthärtende Klebstoffe im Flugzeuginnenraum

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  8. Published

    Anwendung dere SIS/DSC-Methodik auf PE Werkstoffe

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    Applicability and limitations of various fracture mechanical testing concepts under static and cyclic loads

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  10. Published

    Bending tests for TP-GFUP hybrid materials

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    Bestimmung der Bruchkraft von Kunststoffketten im monotonen Zugversuch

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  12. Published

    Bestimmung der Glasübergangstemperatur mit dynamisch-mechanischer Analyse (DMA)

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Bestimmung der Zugeigenschaften von Folien aus Infusionsbeuteln (Phase 6)

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    Blocker Door fretting fatigue test

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  15. Published

    Blocker Door fretting fatigue test - Karon B coating

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Brittle and ductile failure behavior of PE pipe grades

    Pinter, G., Major, Z., Haager, M. J. & Lang, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  17. Published

    Bruchmechanische Eigenschaften von gehärteten Epoxidharzen

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Characterization of the failure behavior of elastomers by fracture mechanics methods

    Major, Z., Balika, W., Feichter, C., Steinberger, R. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Characterization of the tensile-compression fatigue behavior of RTM-laminates by isocyclic stress-strain diagrams

    Ladstätter, E., Pinter, G. & Lang, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Charakterisierung der Auswirkungen unterschiedlicher Laminatvorbehandlung (Sandstrahlen) auf die Oberflächenqualität und den GIC-Wert von verklebten Laminaten

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Charakterisierung des Ermüdungsrisswachstums in PE mit CT Proben - Methodenentwicklung

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Charakterisierung des Impactverhaltens von PE-Methodenentwicklung

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Charakterisierung transparenter Formstoffe für Skier

    Wallner, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Charpy tests for TP-GFUP hybrid materials

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Comparison of thermomechanical properties and creep behaviour of HPM001 and HPM100

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Compression tests for pipe wall specimens

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    Compression tests for pipe wall specimens, contacting and non-contacting deformation measurements

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    Compression Tests on a Hobas CC-GRP Pipe Material

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Curing Process Control for Neat Resins by DSC, DMA and DEA

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    Deformation behavior of polyolefins under monotonic loading - development and implementation of test methods

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    Determination of "True Stress vs. True Strain" Data for Thin Molybdenum Sheets

    Major, Z. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    Development and implementation of non-contact strain and deformation test methods for polymeric materials and components

    Fauster, E., Steinberger, R., Major, Z., O'Leary, P. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    Development of fatigue test methods for elastomers - Standard and complex methods

    Feichter, C., Major, Z. & Lang, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  34. Published

    Dielektrische Analyse (DEA) - Geräte und Leistungsmerkmale

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    DMA-Ringversuch

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  36. Published

    Druckversuche an Composite-Proben - Compression strength and modulus measurements

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  37. Published

    Druckversuche an Flugzeugbauteil-Komponenten

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  38. Published

    Druckversuche an Kalibrierkörpern (Flugzeugbauteil-Komponenten)

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  39. Published

    DSC-Messungen an Achsen aus PBT-GF30

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  40. Published

    Dynamic mechanical analysis for liner resins

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Dynamisch-mechanische Analyse (DMA) von Epoxidharzen

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Effect of frequency, R-ratio and test specimen configuration on fatigue crack growth in PE pipe materials

    Balika, W., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Einfluss der Härtungsbedingungen auf Reinharz-Schlüsseleigenschaften

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Einfluss des Aushärtegrades auf wesentliche Werkstoffeigenschaften eines Epoxidharz - Matrixwerkstoffes

    Wolfahrt, M., Pilz, G. & Lang, R., 2005, 15. Symposium: Verbundwerkstoffe und Werkstoffverbunde. p. 199-204

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Entwicklung von Gießformen für die Reinharzhärtung

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    Ermüdungsrisswachstumsversuche an CT Proben aus PE bei 10 Hz

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Fatigue behavior of RTM laminates

    Ladstätter, E., Pinter, G., Billinger, W. & Lang, R., 2005, In: VLK-News. p. 4-7

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Fatigue crack growth in PE-HD pipe grades

    Pinter, G., Haager, M. J., Balika, W. & Lang, R., 2005, In: Plastics, rubber and composites. 34, p. 25-33

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Fatigue of Glass-Fiber Reinforced Plastics - Characterization Methods and Structure-Property-Relationsships

    Zahnt, B.-A. & Lang, R., 2005, Series on Advances in Experimental Mechanics Volume 9. p. 107-144

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Feuchteaufnahmeverhalten von gehärteten Epoxidharzen

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Fracture mechanical tests for HPM001

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. Published

    Fracture mechanical tests for liner resins

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  53. Published

    Guest Editoral

    Wallner, G. & Lang, R., 2005, In: Solar energy. p. 571-572

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Härtungscharakterisierung von Reinharzen mit dynamischer Differ-enzkalorimetrie (DSC)

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  55. Published

    Impact bending tests (Charpy) for liner resins

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  56. Published

    Influence of crack tip sharpness and radius on the strain distribution in rubbers analyzed by finite element simulation and experiments

    Feichter, C., Major, Z. & Lang, R., 2005, In: VLK-News. p. 6-12

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Influence of crack tip sharpness and radius on the strain distribution in rubbers analyzed by finite element simulation experiments

    Feichter, C., Major, Z. & Lang, R., 2005, European Conference on Constitutive Models for Rubber IV (ECCMR 2005). Balkema, p. 89-95

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Instrumentierte Impactversuche an Rohren aus Polypropylen in Anlehnung an EN 744

    Major, Z. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  59. Published

    Interlaminare Scherfestigkeitsmessungen - Interlaminar sher strength (ILSS) measurements

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  60. Published

    Interlaminar shear tests for TP-GFUP hybrid materials

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  61. Published

    Investigations on a crack containing elastomer/metal component

    Major, Z. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  62. Published

    Konzept zur Nachweisführung für Nutzungsdauer und Sicherheit von PE-Druckrohren bei beliebiger Einbausituation

    Lang, R., Pinter, G. & Balika, W., 2005, In: 3 R international. 44, p. 33-41

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Kunststofftechnische Aspekte bei der Entwicklung organisch bandbeschichteter Stahlbleche für Automobilanwendungen

    Buder-Stroizsnigg, M., Wallner, G., Gruber, D., Strauss, B., Jandel, L. & Lang, R., 2005, In: Berg- und hüttenmännische Monatshefte : BHM. 150, p. 293-300

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Literatur- und Marktrecherche nach potentiell geeigneten Klebstoffsystemen für Flugzeuginnenanwendungen

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  65. Published

    Low Temperature Cure Adhesives for Aircraft Interior Applications with Phenolic Matrix Composites - Feasibility Study and Material Characterization

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  66. Published

    Materialanalyse an spritzgegossenen Abdeckkappen für Solar-Wechselrichter

    Wallner, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  67. Published

    Materialuntersuchung an Kunststoffschlägel

    Wallner, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  68. Published

    Mechanical and thermal investigations on materials for head covers used in medium-voltage applications

    Balika, W. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  69. Published

    Mechanische Eigenschaften kohlenfaserverstärkter RTM-Laminate bei monotoner und zyklischer Zugbelastung

    Ladstätter, E., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  70. Published

    Mechanische und thermo-kalorimetrische Charakterisierung von kalt-härtenden Klebstoffen

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  71. Published

    Methodikentwicklung für die Klebstoffcharakterisierung

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  72. Published

    Methodikentwicklung für eine Klebstoffspezifikation

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  73. Published

    Methodikentwicklung zur Reinharzoptimierung

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  74. Published

    Optimierung der Härtungsparameter für die Reinharzplattenherstellung

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  75. Published

    Planung, Bau und Implementierung eines FNCT-Prüfstandes

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  76. Published

    Polymeric Materials for Sustainable Development - WP Report "Polymere Nanocomposites für die Solartechnik"

    Gruber, D., Wallner, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  77. Published

    Prüfnormen und Regelwerke für Klebeverbindungen im Flugzeugbau

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  78. Published

    Ranking of PE pipe grades by their failure behavior under impact loads

    Pinter, G., Major, Z., Haager, M. J. & Lang, R., 2005, ANTEC. p. 3551-3555

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    Ranking von PE-Rohrwerkstoffen mittels Ermüdungsrisswachstum

    Hiesch, T. J., Haager, M. J., Pinter, G. & Lang, R., 2005, 10 Tagung Problemseminar: Deformation und Bruchverhalten von Kunststoffen. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Ranking von PE-Rohrwerkstoffen mittels Ermüdungsrisswachstum

    Hiesch, T. J., Haager, M. J., Pinter, G. & Lang, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  81. Published

    REM Untersuchungen von Pulver-Oberflächen

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  82. Published

    Risswachstumsverhalten von PE-Rohrwerkstoffen

    Haager, M. J., Pinter, G., Balika, W. & Lang, R., 2005, 10 Tagung Problemseminar: Deformation und Bruchverhalten von Kunststoffen. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Scanning X-ray scattering study on structural changes at crack tips in PVDF

    Maier, G., Wallner, G., Lang, R. & Fratzl, P., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  84. Published

    Statische Versuche an CT-Proben aus PE

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  85. Published

    Structural Changes during Plastic Deformation at Crack Tips in PVDF Films: A Scanning X-ray Scattering Study

    Maier, G., Wallner, G., Lang, R. & Fratzl, P., 2005, In: Macromolecules. 38, p. 6099-6105

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Structural changes during plastic deformation at crack tips of PVDF films - A semiquantative analysis

    Maier, G., Wallner, G., Lang, R. & Fratzl, P., 2005, 15th International Conference on Composite Materials (ICCM-15). Centre for Composite and Smart Materials and Structures, p. 6-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    Structure–property correlations of polymeric films for transparent insulation wall applications. Part 1: Solar optical properties

    Wallner, G., Platzer, W. & Lang, R., 2005, In: Solar energy. 79, p. 583-592

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Structure-property correlations of polymeric films for transparent insulation wall applications. Part 2: Infrared optical properties

    Wallner, G., Platzer, W. & Lang, R., 2005, In: Solar energy. p. 593-602

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Studies of Creep and Fatigue Crack Growth in HD-PE-pipe materials

    Haager, M. J., Pinter, G., Lang, R. & Zhou, W., 2005, ANTEC. p. 3538-3542

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Temperierte Kriechversuche an Kunststoffscheiben

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  91. Published

    Tensile-compression fatigue behavior of RTM-laminates

    Ladstätter, E., Pinter, G. & Lang, R., 2005, SAMPE Fall Technical Conference. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    Tensile strength and tensile modulus measurements

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  93. Published

    Tensile tests for liner resins

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  94. Published

    Tensile tests for TP-GFUP hybrid materials

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  95. Published

    Test der Subkomponente "lug CHF" Lug subcomponent test

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  96. Published

    Thermoanalytische umd morphologische Untersuchungen an Achsen aus PBT-GF30

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  97. Published

    Thermographische Verfahren zur Schadensdetektion an kohlenstofffaserverstärkten RTM-Laminaten in Ermüdungsversuchen

    Ladstätter, E., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  98. Published

    Thermokalorimetrische Charakterisierung (DSC) von gehärteten Reinharzplatten

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  99. Published

    Thermokalorimetrische Charakterisierung (DSC) von ungehärteten u. gehärteten Reinharzen

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  100. Published

    Thermomechanische Eigenschaften von gehärteten Epoxidharzen

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  101. Published

    Through thickness characterization of crack growth and process zone development in cyclically loaded PE-HD

    Balika, W., Pinter, G. & Lang, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  102. Published

    Through-thickness process zone characterization at fatigue cracks in PE-HD

    Balika, W., Pinter, G. & Lang, R., 2005, ANTEC. p. 3512-3516

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 Next
View graph of relations

Latest Research Output

View more (365)