Reinhold Lang

(Former)

101 - 200 out of 365Page size: 100

Research output

  1. 2007
  2. Published

    Characterisation of the fatigue behavior of short glass fiber reinforced polymers

    Guster, C., Pinter, G., Major, Z., Eichlseder, W. & Lang, R., 2007, Polymeric Materials in Automotove PMA. p. 47-49

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Characterisation of the fracture behavior of elastomeres under complex loading conditions

    Major, Z., Lederer, K. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 223-224

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Characterisation of the friction behavior of table tennis rubbers

    Major, Z. & Lang, R., 2007, International Table Tennis Federation. p. 123-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Charakterisierung von Schrumpffolien

    Wallner, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  6. Published

    Compression tests on sandfilled UP-Resins

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  7. Published

    Cyclic crack growth tests with CRB specimens for the evaluation of the long-term performance of PE pipe grades

    Pinter, G., Haager, M., Balika, W. & Lang, R., 2007, In: Polymer Testing. 26, p. 180-188

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Determination of time dependent Poisson's ratio values in monotonic and creep tensile experiments

    Steinberger, R., Jerabek, M., Major, Z. & Lang, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  9. Published

    DSC-Analyse eines Spitzenmaterials

    Wallner, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  10. Published

    Dynamisch-mechanische Charakterisierung (DMA) von Thermoplasten

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    Experimental determination of fatigue crack growth behavior and surface strain distribution of 'faint waist pure shear' specimens with different crack tip radii

    Feichter, C., Major, Z. & Lang, R., 2007, In: Rubber chemistry and technology. 79, p. 712-733

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Flatwise Tension Test an Aluminiumkernverbunden

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Fracture of poly(vinylidene fluoride): a combined synchrotron and laboratory in-situ X-ray scattering study

    Maier, G. A., Wallner, G., Lang, R., Keckes, J., Amentisch, H. & Fratzl, P., 2007, In: Journal of applied crystallography. 40, Supplement April, p. s564-s567

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Influence of nonylphenol-polyglycol-ether environments on the results of the full notch creep test

    Pinter, G., Haager, M. & Lang, R. W., 2007, In: Polymer Testing. p. 700-710

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Influence of the curing degree on modulus, glass transition temperature and fracture energy of two epoxy resins for composites

    Wolfahrt, M., Pilz, G. & Lang, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    In-Plane shear properties of reinforced composites with different fiber volume content

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    IR-Analyse von Gießharzprofilen

    Wallner, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Konfokalmikroskopische Vermessung einer strukturierten Sonnenschutzfolie

    Wallner, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Kunststoffe - Neue Möglichkeiten in der Solarthermie

    Wallner, G. & Lang, R., 2007, In: VLK-News. p. 19-21

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Kurzglasfaserverstärkte Kunststoffe - Charakterisierung der Werkstoffanisotropie und Untersuchung deren Einfluss auf das Schwingfestigkeitsverhalten

    Guster, C., Eichlseder, W., Pinter, G. & Lang, R., 2007, In: VLK-News. p. 13-18

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Lifetime and safety assessment of PE pressure pipes based on fracture mechanics fatigue tests

    Pinter, G., Haager, M. & Lang, R., 2007, ANTEC 2007. p. 2921-2925

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Literaturrecherche zu viskoelastischen Flüssigkeiten für neuartige Dämpfungselemente

    Major, Z. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Material qualification - Determinatin of B-values

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Mechanical characterization of liner resin HPM052 for dry and wet material conditions

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Mechanische Charakterisierung von glas- und basaltfaserverstärkten Epoxidharzen

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Mechanische und schadensanalytische Untersuchungen an Wabenkern-Bauteilen

    Major, Z. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    Method for measuring biaxial deformation on rubber and polypropylene specimens

    Feichter, C., Jerabek, M., Major, Z. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 273-274

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Mikroskopische Analyse einer LC-Folie

    Wallner, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    MSRR 1054 Material Change

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    Qualitatives und quantitatives Verständnis des Walzkontaktes

    Major, Z. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    Schadensanalytische Untersuchungen an Kunststoff-Rollen im Walzkontakt

    Major, Z. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    Small strain test system for optical strain measurement systems

    Steinberger, R., Jerabek, M., Major, Z. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 393-394

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Some influences on the fatigue behaviour of short-glasfiber-reinforced polymers

    Guster, C., Pinter, G., Eichlseder, W. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 125-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Systematic investigations of fatigue crack growth behavior of a PE-HD pipe grade in through-thickness direction

    Balika, W., Pinter, G. & Lang, R., 2007, In: Journal of Applied Polymer Science. p. 1745-1758

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Tensile tests for liner resin HPM053 with and without pigment

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  36. Published

    Tensile tests for UP-Resin distitron 412 V2 with various filler types (dry and wet)

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  37. Published

    Testing of rail parts according ST 120/20a - AREA in case of heavy load application

    Major, Z. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  38. Published

    The influence of fiber-orientation and stress ratio on the fatigue behavior of short-glasfiber-reinforced polymers

    Guster, C., Pinter, G., Eichlseder, W. & Lang, R. W., 2007, Society of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007, Conference Proceedings. p. 284-288 5 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    The influence of fiber-orientation and stress ratio on the fatigue behavior of short-glass-fiber-reinforced plastics

    Guster, C., Pinter, G., Eichlseder, W. & Lang, R., 2007, ANTEC 2007. p. 284-288

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Topografiemessung einer ungetemperten und einer getemperten mit Kunststoff beschichteten Aluminiumfolie

    Berger, G. R. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Zugprüfungen an glasfaserverstärkten Composites

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. 2006
  43. Published

    Characterisation of the tensile fatigue behaviour of RTM-laminates by isocyclic stress-strain-diagrams

    Pinter, G., Ladstätter, E., Billinger, W. & Lang, R. W., Oct 2006, In: International Journal of Fatigue. 28, 10 SPEC. ISS., p. 1277-1283 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Accelerated quality assurance tests for PE pipe grades

    Pinter, G., Haager, M. J. & Lang, R., 2006, ANTEC 2006. p. 2480-2484

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Aging and aging mechanism of functional polymers for optical applications - WP Report "Untersuchungen an funktionalen Polyolefinen – Teil3 (Diss Oreski)"

    Wallner, G., Oreski, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    Aging and aging mechanism of functional polymers for optical applications - WP Report "Untersuchungen an Solarabsorbermaterialien (Diss Kahlen)"

    Wallner, G., Kahlen, S. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    A novel qualification concept for lifetime and safety assessment of PE pressure pipes for arbitrary installation conditions

    Lang, R., Pinter, G., Balika, W. & Haager, M. J., 2006, Plastics Pipes XIII. Plastics Pipes Conference Association, p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Application demonstration and performance of a cellulose triacetate polymer film based transparent insulation wall heating system

    Wallner, G., Hausner, R., Hegedys, H., Schobermayr, H. & Lang, R., 2006, In: Solar energy. 80, p. 1410-1416

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Bestimmung der thermischen Ausdehnung von Epoxidharzwerkstoffen

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Bestimmung von Werkstoffkennwerten zur FE-Simulation

    Major, Z. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Betriebsfestigkeitsuntersuchungen von faserverstärkten Kunststoffen

    Guster, C., Balika, W., Lang, R. & Eichlseder, W., 2006, 1. Leobner Betriebsfestigkeitstage 2006. Montanuniversität Leoben, Lehrstuhl für Allgemeinen Maschinenbau, p. 279-292

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Blind Rivet Pull Out Tests

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  53. Published

    Characterisation of the Fatigue Behavior of Elastomer Composites

    Major, Z., Kovacevic, Z., Kosir, M., Mesec, A. & Lang, R., 2006, 5th International Conference on Mechanics and Materials in Design. INEGI-Instituto de Engenharia Mecânica e Gestão Industrial, p. 391-392

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Characterisation of the fatigue behavior of elastomers and elastomer Composite

    Major, Z., Feichter, C., Kovacevic, Z. & Lang, R., 2006, 1. Leobner Betriebsfestigkeitstage 2006. Montanuniversität Leoben, Lehrstuhl für Allgemeinen Maschinenbau, p. 265-277

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Characterization of the Mechanical Behavior of Polyetheretherketone (PEEK)

    Major, Z. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  56. Published

    Characterization of the tensile fatigue behaviour of RTM-laminates by isocyclic stress-strain diagrams

    Pinter, G., Ladstätter, E., Billinger, W. & Lang, R., 2006, In: International Journal of Fatigue. p. 1277-1283

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Charakterisierung des Oberflächenerscheinungsbildes organisch bandbeschichteter Stahlbleche für Automobilanwendungen

    Gruber, D., Wallner, G., Buder-Stroisznigg, M., Strauß, B., Jandel, L. & Lang, R., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 205-208

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Charakterisierung von Epoxidharzwerkstoffen

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  59. Published

    Comparison between time-independent FE-Simulation and measurements for two types of rubber

    Feichter, C., Major, Z. & Lang, R., 2006, 5th International Conference on Mechanics and Materials in Design. INEGI-Instituto de Engenharia Mecânica e Gestão Industrial, p. 523-524

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Compression / Inplane Shear Tests

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  61. Published

    Control of the resin transfer moulding process using dielectric and thermal analysis

    Wolfahrt, M., Pilz, G., Lang, R. & Ladstätter, E., 2006, Latest advancements of applied composite technology: SAMPE Europe 27th international conference, March 27th - 29th, 2006, Paris EXPO, Porte de Versailles ; proceedings. p. 309-313

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Deformation analysis of notched rubber specimens

    Feichter, C., Major, Z. & Lang, R., 2006, In: Strain. p. 299-304

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Development of a test and fatigue analysis methodology for elastomeric seals exposed to explosive decompression

    Major, Z., Lederer, K., Moitzi, M., Mitterhuber, M., Schwarz, T. & Lang, R., 2006, Development of a test and fatigue analysis methodology for elastomeric seals exposed to explosive decompression. p. 1-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    DSC-Analyse eines vernetzten Gießharzes

    Wallner, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  65. Published

    DSC-Untersuchungen an PE-HD Bauteilen

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  66. Published

    Dynamische-mechanische Analyse (DMA) von Thermoplasten

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  67. Published

    Dynamisch-mechanische Untersuchungen und Kriechversuche an Elastomerwerkstoffen

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  68. Published

    Effect of artificial defects on the fatigue behavior of RTM laminates

    Pinter, G., Ladstätter, E. & Lang, R. W., 2006, p. 133-137. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  69. Published

    Effect of artificial defects on the fatigue behaviour of RTM laminates

    Pinter, G., Ladstätter, E. & Lang, R., 2006, ANTEC 2006. p. 133-137

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Ermüdungsversuche an Laminaten

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  71. Published

    Fatigue crack growth and process zone development in a PE-HD pipe grade in through-thickness direction

    Balika, W., Pinter, G. & Lang, R., 2006, In: Advanced engineering materials. p. 1146-1150

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Flatwise Tension Test an Aluminiumkernverbunden

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  73. Published

    Heat deflection temperature of neat resins HPM001, HPM002 and HPM054

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  74. Published

    Impact Tensile Characterization of Polytron-GRF

    Steinberger, R. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  75. Published

    Influence of Annealing on the Fracture Behavior of 200 µm Thick a-PVDF Films

    Wallner, G., Major, Z., Maier, G. & Lang, R., 2006, In: Advanced engineering materials. 8, p. 1140-1145

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Influence of the curing degree on key resin properties of high Tg epoxy resins for composites

    Wolfahrt, M., Pilz, G., Lang, R., Eugen, R., Krumlacher, W. & Plessing, A. K., 2006, proceedings: SAMPE-EUROPE 2006, Paris, F.. p. 314-319

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Influence of the curing degree on modulus, glass transition temperature and fracture energy of two epoxy resins for composites

    Wolfahrt, M., Pilz, G. & Lang, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  78. Published

    Infrared thermographic techniques for non-destructive damage characterization of carbon fibre reinforced polymers during tensile fatigue testing

    Steinberger, R., Leitao, T. I. V., Ladstätter, E., Billinger, W., Pinter, G. & Lang, R., 2006, In: International Journal of Fatigue. p. 1340-1347

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    IR-spektroskopische Analysen an coextrudierten Rohrmustern

    Balika, W. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  80. Published

    Kunststoffe - Neue Möglichkeiten in der Solarthermie

    Wallner, G. & Lang, R., 2006, In: Erneuerbare Energie. p. 10-12

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Materialanalyse an extrudierten Verpackungsfolien

    Wallner, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  82. Published

    Materialvergleich für Schiebedeckeln von Kühltruhen

    Steinberger, R. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  83. Published

    Mechanische und thermoanalytische Tests an Composite Laminaten

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  84. Published

    Moisture absorption of liner resins

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  85. Published

    Polymeric Materials for Sustainable Development - WP Report "Polymere Nanocomposites für die Solartechnik"

    Gruber, D., Wallner, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  86. Published

    Polymeric Materials for Sustainable Development - WP Report "Symposium/IEA-Task “Materialien für die Solartechnik”"

    Wallner, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  87. Published

    Prüfungs- und Versagensanalyse für die explosive Dekompression elastomerer Dichtungen

    Major, Z., Lederer, K., Moitzi, M., Mitterhuber, M., Schwarz, T. & Lang, R., 2006, In: GAK : Gummi, Fasern, Kunststoffe. p. 685-694

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Ranking of PE pipe grades by cyclic crack growth tests with cracked round bar specimens

    Pinter, G., Haager, M. J. & Lang, R., 2006, ANTEC 2006. p. 2475-2479

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Ranking of polyethylene pipe materials using fatigue loading of cracked round bar specimens

    Haager, M. J., Pinter, G., Balika, W. & Lang, R., 2006, Plastics Pipes XIII. Plastics Pipes Conference Association, p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Ranking of Polyethylene pipe materials using fatigue loading of cracked round bar specimens

    Haager, M. J., Pinter, G., Balika, W. & Lang, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  91. Published

    Rauigkeitsmessungen an unterschiedlichen Kunststofffolien

    Balika, W. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  92. Published

    Tensile, Bending and Charpy Tests for GF-UP Materials W1 and W2

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  93. Published

    Tensile, Bending and Charpy Tests for Hybrid Materials W32 and W42

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  94. Published

    Tensile tests for neat resin and calciumcarbon-ate filled resin formulations of Distitron 412 V2

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  95. Published

    Test and failure analyses methodology for elastomeric seals exposed to explosive decompression

    Major, Z., Lederer, K., Moitzi, M., Mitterhuber, M., Schwarz, T. & Lang, R., 2006, In: Rubber, fibres, plastics international. p. 93-100

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    The Test Frequency dependence of the fatigue behavior of elastomers

    Major, Z., Feichter, C., Steinberger, R. & Lang, R., 2006, Fracture of Nano and Engineering Materials. Springer, p. 777-784

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Trommelschälversuch an Aluminiumkernverbunden

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  98. Published

    Untersuchungen an Polypropylen für eine Beizbeckenanwendung

    Balika, W. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  99. Published

    Vergleichende Untersuchungen flächen- und kalandergeprägter PET-Laminatfolien

    Wallner, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  100. Published

    Zugversuche an Kunststoffketten

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  101. Published

    Zugversuche an PET-Verpackungsbändern

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  102. Published

    Zugversuche an stumpfgeschweißten Polyethylenrohren nach EN 12814-2

    Haager, M. J. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1 2 3 4 Next
View graph of relations

Latest Research Output

View more (365)