Reinhold Lang

(Former)

1 - 365 out of 365Page size: 500

Sort by: Publication date

Research output

2017
Published
Fracture mechanics methods to assess the lifetime of thermoplastic pipes
Arbeiter, F., Pinter, G., Lang, R. W. & Frank, A., 2017, Springer Series in Materials Science. Springer Berlin, Vol. 247. p. 33-54 22 p. (Springer Series in Materials Science; vol. 247).
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
2012
Published
Thermotropic Layers for Overheating Protection of all-Polymeric Flat Plate Solar Collectors
Resch, K., Hausner, R., Wallner, G. M. & Lang, R., 2012, Polymeric Materials for Solar Thermal Applications. p. 255-265
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
2011
Published
On the determination of the relaxation modulus of PP compounds from arbitrary strain histories
Tscharnuter, D., Jerabek, M., Major, Z. & Lang, R., 2011, In: Mechanics of time-dependent materials. 15, 1, p. 01-14
Research output: Contribution to journal › Article › Research › peer-review
Published
Time-dependent poisson’s ratio of polypropylene compounds for various strain histories
Tscharnuter, D., Jerabek, M., Major, Z. & Lang, R., 2011, In: Mechanics of time-dependent materials. 15, 1, p. 15-28
Research output: Contribution to journal › Article › Research › peer-review
2010
Published
Aging behavior and lifetime modeling for polycarbonate
Kahlen, S., Wallner, G. & Lang, R., 2010, In: Solar energy. p. 755-762
Research output: Contribution to journal › Article › Research › peer-review
Published
Aging behavior of polymeric absorber materials for solar thermal collectors
Kahlen, S., Wallner, G. & Lang, R., 2010, Proceedings of P2010, 14th International Scientific Conference on Polymeric Materials.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Aging behavior of polymeric solar absorber materials: Aging on the component level
Kahlen, S., Wallner, G., Lang, R., Meir, M. & Rekstad, J., 2010, In: Solar energy. p. 459-465
Research output: Contribution to journal › Article › Research › peer-review
Published
Characterization of physical and chemical aging of polymeric solar materials by mechanical testing
Kahlen, S., Jerabek, M., Wallner, G. & Lang, R., 2010, In: Polymer Testing. p. 72-81
Research output: Contribution to journal › Article › Research › peer-review
Published
Characterization of the fracture behavior of NBR and FKM grade elastomers for oilfield applications
Major, Z. & Lang, R., 2010, In: Engineering Failure Analysis. p. 701-711
Research output: Contribution to journal › Article › Research › peer-review
Published
Development and Characterization of polymeric thermotropic materials for overheating protectiion of solar collectors
Resch, K., Wallner, G. & Lang, R., 2010, Society of Plastics Engineers. p. 1127-1130
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Filler/matrix-debonding and micro-mechanisms of deformation in particulate filled polypropylene composites under tension
Jerabek, M., Major, Z., Renner, K., Moczo, J., Pukanszky, B. & Lang, R., 2010, In: Polymer. p. 2040-2048
Research output: Contribution to journal › Article › Research › peer-review
Published
Strain determination of polymeric materials using digital image correlation
Jerabek, M., Major, Z. & Lang, R., 2010, In: Polymer Testing. p. 407-416
Research output: Contribution to journal › Article › Research › peer-review
Published
Uniaxial compression testing of polymeric materials
Jerabek, M., Major, Z. & Lang, R., 2010, In: Polymer Testing. p. 302-309
Research output: Contribution to journal › Article › Research › peer-review
2009
Published
A fracture mechanics concept for the accelerated characterization of creep crack growth in PE-HD pipe grades
Frank, A., Freimann, W., Pinter, G. & Lang, R., 2009, In: Engineering Fracture Mechanics. 76, p. 2780-2787
Research output: Contribution to journal › Article › Research › peer-review
Published
Ageing characterization of commercial ethylene copolymer greenhouse films by analytical and mechanical methods
Oreski, G., Wallner, G. & Lang, R., 2009, In: Biosystems engineering. 103, p. 489-496
Research output: Contribution to journal › Article › Research › peer-review
Published
Aging of polymers in solar-thermal applications, Final Report
Wallner, G., Kahlen, S. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Aging of polymers in solar-thermal applications, WP Report Alterung, Analyse und Charakterisierung von Bauteilen
Wallner, G., Kahlen, S. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Aging of polymers in solar-thermal applications, WP Report Alterung, Analyse und Charakterisierung von Halbzeugen
Wallner, G., Kahlen, S. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Aging of polymers in solar-thermal applications, WP Report Herstellung von Compounds, Halbzeugen und Bauteilen
Wallner, G., Kahlen, S. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Characterization and simulation of the micromechanical behaviour of particulate filled polypropylene compounds under creep loading
Gastl, S., Jerabek, M., Major, Z. & Lang, R., 2009.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Close-Fit Relining - Verfahrensbedingte Beeinflussung der Werkstoffeigenschaften und des Rohrlangzeitverhaltens
Frank, A., Haager, M., Hofmann, A., Pinter, G. & Lang, R., 2009, ÖGL Symposium Grabenlos. p. 54-66
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Crack growth in polyethylene (PE-HD) - from macroscopic failure to molecular failure mechanisms
Lang, R., Pinter, G., Frank, A. & Haager, M., 2009, EPF'09 European polymer congress. p. 121-121
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Development and characterization of novel two-layer high performance coil coatings for the buildings industry, Final Report
Wallner, G., Buder-Stroisznigg, M., Fischer, J. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Development and characterization of novel two-layer high performance coil coatings for the buildings industry, WP Report Analyse von Lackkomponenten, Lackfilmen und bandbeschichteten Blechen
Wallner, G., Fischer, J., Buder-Stroisznigg, M. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Development and characterization of novel two-layer high performance coil coatings for the buildings industry, WP Report Charakterisierung von Lackfilmen und bandbeschichteten Blechen
Wallner, G., Buder-Stroisznigg, M., Fischer, J. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Development and characterization of novel two-layer high performance coil coatings for the buildings industry, WP Report Herstellung von Lacken
Wallner, G., Buder-Stroisznigg, M., Fischer, J. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Development and characterization of novel two-layer high performance coil coatings for the buildings industry, WP Report Herstellung von Lackfilmen und beschichteten Blechen
Wallner, G., Buder-Stroisznigg, M., Fischer, J. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Diverse Messungen an Polypropylen-Talk Compounds
Pinter, G. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Dynamisch-Mechanische Analyse (DMA) an PMMA-Folien
Pilz, G. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Dynamisch-Mechanische Analyse (DMA) von Folienwerkstoffen
Pilz, G. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Dynamisch-Mechanische Analyse (DMA) von Thermoplastwerkstoffen
Pilz, G. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Effect of molecular and morphological parameters of PE-UHMW compounds on the performance of ski running surfaces, Final Report
Wallner, G., Fischer, J. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Effect of molecular and morphological parameters of PE-UHMW compounds on the performance of ski running surfaces, WP Report: Analyse und Charakterisierung von Bauteilen
Fischer, J., Wallner, G. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Effect of molecular and morphological parameters of PE-UHMW compounds on the performance of ski running surfaces, WP Report: Analyse und Charakterisierung von Rohstoffen und Halbzeugen
Fischer, J., Wallner, G. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Effect of molecular and morphological parameters of PE-UHMW compounds on the performance of ski running surfaces, WP Report: Herstellung von Rohstoffen, Halbzeugen und Bauteilen
Fischer, J., Wallner, G. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Effects of temperature and moisture on the tensile/tensile fatigue behavior of an injection molded sgf-reinforced partial aromatic polyamide
Guster, C., Pinter, G., Eichlseder, W. & Lang, R., 2009, 12th International Conference on Fracture, ICF 13. p. 1-9
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Filler/matrix-debonding and micro-mechanisms of deformation in particulate filled pp composites under tension
Jerabek, M., Major, Z. & Lang, R., 2009, Euro Fillers 2009. p. 18-22
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Flexible clear coats - Effect of curing conditions
Buder-Stroisznigg, M., Wallner, G., Strauß, B., Jandel, L. & Lang, R., 2009, In: Progress in organic coatings. 65, p. 44-48
Research output: Contribution to journal › Article › Research › peer-review
Published
Lifetime prediction of polyethylene pipes based on an accelerated extrapolation concept for creep crack growth with fatigue tests on cracked round bar specimens
Frank, A., Pinter, G. & Lang, R., 2009, ANTEC 2009 Society of Plastics Engineers' Annual Technical Conference. p. 2169-2174
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Lifetime Prediction of the Fatigue crack growth (FCG) of high density polyethylene (HDPE) by crack layer theory
Choi, B.-H., Balika, W., Chudnovsky, A., Pinter, G. & Lang, R., 2009, In: Polymer engineering and science. 49, p. 1421-1428
Research output: Contribution to journal › Article › Research › peer-review
Published
Mechanische Charakterisierung von CFK-Werkstoffen
Pilz, G. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Prediction of the remaining lifetime of polyethylene pipes after up to 30 years in use
Frank, A., Pinter, G. & Lang, R., 2009, In: Polymer Testing. 49, p. 737-745
Research output: Contribution to journal › Article › Research › peer-review
Published
Special topics of polymer science and advanced characterization methods, Final Report
Wallner, G., Fischer, J., Oreski, G., Resch, K. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Special topics of polymer science and advanced characterization methods, WP Report Fortschrittliche IR Spektroskopie
Oreski, G., Wallner, G. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Special topics of polymer science and advanced characterization methods, WP Report Fortschrittliche Rasterkraftmikroskopie
Resch, K., Wallner, G. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Special topics of polymer science and advanced characterization methods, WP Report Ramanspektroskopie und Ramanmikroskopie
Wallner, G., Lang, R. & Fischer, J., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Thermische Untersuchungen an glasfaserverstärkten PA-Werkstoffen
Pilz, G. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Thermische Untersuchungen an PA-Werkstoffen
Pilz, G. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Thermoanalytical investigation of a sieve residue - project: Jiwi Kamai
Wallner, G. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Thermo mechanical characterization of PE and PP materials
Pilz, G., Pinter, G. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Utilizing unbleached cellulosic fibres in polypropylene matrix composites for injection moulding applications
Burgstaller, C., Rüf, W., Stadlbauer, W., Pilz, G. & Lang, R., 2009, In: Journal of biobased materials and bioenergy. p. 226-231
Research output: Contribution to journal › Article › Research › peer-review
Published
Zug- und Biegeprüfung eines Polymerbeton-Verbundwerkstoffes
Pilz, G. & Lang, R., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
2008
Published
2. Leobener Symposium "SOLARTECHNIK - Neue Möglichkeiten für die Kunststoffbranche
Lang, R. (Editor) & Wallner, G. (Editor), 2008, Eigenverlag.
Research output: Book/Report › Anthology › Research
Published
Accelerated investigation of creep crack growth in polyethylene pipe grade materials by the use of fatigue tests on cracked round bar specimens
Frank, A., Pinter, G. & Lang, R., 2008, ANTEC 2008 Society of Plastics Engineers' Annual Technical Conference. p. 2435-2439
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Analysis of coloring of PP containers
Pinter, G. & Lang, R., 2008
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
A novel methodology for the evaluation of distinctness of image of glossy surfaces
Gruber, D., Buder-Stroisznigg, M., Wallner, G., Strauß, B., Jandel, L. & Lang, R., 2008, In: Progress in organic coatings. 63, p. 377-381
Research output: Contribution to journal › Article › Research › peer-review
Published
A novel qualification procedure for lifetime and safety assessment of PE pressure pipes for arbitrary installation conditions
Frank, A., Pinter, G. & Lang, R., 2008, Plastics Pipes XIV (CD). p. 1-12
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Characterisation of the fracture behavior of NBR and FKM grade elastomers for oilfield applications
Major, Z. & Lang, R., 2008, Multilevel Approach to Fracture of Materials, Components and Structures. p. 228-228
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Characterization of the effects of preforming and redeforming on morphology and thermo-mechanical properties of polyethylene close-fit liners for trenchless pipe rehabilitation
Frank, A., Mannsberger, G., Pinter, G. & Lang, R., 2008, ANTEC 2008 Society of Plastics Engineers' Annual Technical Conference. p. 2251-2255
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Characterization of the Fracture and Fatigue Behavior of Elastomer Composites
Major, Z. & Lang, R., 2008, EUROMECH Colloquium 502. p. 71-74
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Characterization of the impact tensile behavior of glass fibre reinforced polyamide (PA-GF) Materials
Major, Z. & Lang, R., 2008
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Characterization of the tensile behavior of glass fiber reinforced polyamide materials (PA-LGF) at high loading rates
Major, Z. & Lang, R., 2008
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Cross-linking behavior of UV-curable acrylate resins
Wallner, G., Resch, K. & Lang, R., 2008, In: Zeitschrift Kunststofftechnik : Journal of plastics technology. p. 2-14
Research output: Contribution to journal › Article › Research › peer-review
Published
Deformation Analysis Of Impact Loaded Composites
Fuchs, P., Major, Z. & Lang, R., 2008.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Determination of bearing strength of composites by bold bearing configuration
Pinter, G. & Lang, R., 2008
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Determination of interlaminar fracture toughness energy values according to pr DIN EN 6033
Pinter, G. & Lang, R., 2008
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Dynamisch-mechanische Untersuchungen (DMA) an Thermoplastwerkstoffen
Pilz, G. & Lang, R., 2008
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Dynamisch-mechanische Untersuchungen (DMA) an Thermoplastwerkstoffen - Teil 2
Pilz, G. & Lang, R., 2008
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Fiber orientation and fatigue behavior of a short glass-fiber reinforced partial aromatic polyamide
Guster, C., Pinter, G., Balika, W., Eichlseder, W. & Lang, R., 2008, 2. Fatigue Symposium Leoben. p. 444-455
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Fiber orientation and fatigue behaviour of a short glass-fiber reinforced partial aromatic polyamide
Guster, C., Pinter, G., Balika, W., Eichlseder, W. & Lang, R., 2008.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Flexible clear coats - Effect of curing conditions
Buder-Stroisznigg, M., Wallner, G., Strauß, B., Jandel, L. & Lang, R., 2008.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Fracture analysis of annealed PVDF films
Wallner, G., Major, Z., Maier, G. & Lang, R., 2008, In: Polymer Testing. 27, p. 392-402
Research output: Contribution to journal › Article › Research › peer-review
Published
Mechanical Characterization of Modified Liner Resins HPM052
Pilz, G. & Lang, R., 2008
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Mechanical Characterization of VE- and UP-Laminates
Pilz, G. & Lang, R., 2008
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Modeling of an all polymeric flat-plate collector with thermotropic overheating protection
Resch, K., Hausner, R. & Lang, R., 2008, 1st Intern. Congress on Heating, Cooling and Buildings. p. 1-6
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Ranking of PE pipe materials
Pinter, G. & Lang, R., 2008
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Scanning Electron Microscopy (REM) for UP-Resins with Various Filler Types
Pilz, G. & Lang, R., 2008
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Spectroscopic Investigations of Phase-Separated Thermotropic Layers Based on UV Cured Acrylate Resins
Resch, K., Wallner, G. & Lang, R., 2008, In: Macromolecular Symposia. 265, p. 49-60
Research output: Contribution to journal › Article › Research › peer-review
Published
Tensile Tests for UP-Resin Distitron 412 V2 with Various Filler Types (dry and wet) - Part II
Pilz, G. & Lang, R., 2008
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
The effect of cure condition on the apparent interlaminar shear strength, the glass transition temperature and the interlaminar fracture toughness for a carbon fiber epoxy laminate
Pinter, G. & Lang, R., 2008
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Thermoanalytical investigation of thermoset samples
Wallner, G. & Lang, R., 2008
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Zugversuch an einem Composite-Bauteil (IOR flange test)
Pinter, G. & Lang, R., 2008
Research output: Book/Report › Commissioned report › Transfer › peer-review
2007
Published
3D-Oberflächenvermessung von strukturierten Aluminiumfolien
Berger, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
A340-500/-600 RTM CHF Subcomponent Tests
Pinter, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Analyse des Alterungszustandes von PP-Rohren
Pinter, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Analyse eines Profils
Wallner, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Analyse eines Spritzgussbauteiles
Wallner, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Analyse von Tiefziehmaterialien
Wallner, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Application of full-field strain and temperature measurement and analysis to polymer testing
Major, Z., Steinberger, R., Feichter, C., Jerabek, M. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 473-474
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
A test concept for lifetime prediction of polyethylene pressure pipes
Pinter, G., Lang, R. & Haager, M., 2007, In: Monatshefte für Chemie = Chemical monthly. 138, p. 347-355
Research output: Contribution to journal › Article › Research › peer-review
Published
Bestimmung der Druckfestigkeit von CFK-Laminatwerkstoffen
Pilz, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Bestimmung der Kriech- und Zugeigenschaften für einen PTFE-Dichtungswerkstoff
Pilz, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Bestimmung der Längenausdehnung von Eisstockzwischenplatten aus PA6 GF40
Pinter, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Bestimmung der mechanischen Eigenschaften eines faserverstärkten thermoplastischen Hochleistungswerkstoffes
Pinter, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Bestimmung von ausgewählten mechanischen Eigenschaften eines faserverstärkten thermoplastischen Hochleistungswerkstoffes
Pinter, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Bestimmung von GIC-Werten in Anlehnung an pr DIN EN 6033
Pinter, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Bestimmung von GIC-Werten nach DIN EN 6033 - Part A
Pinter, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Bestimmung von ILSS-Werten nach DIN EN ISO 14130
Wolfahrt, M., Pinter, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Characterisation of the fatigue behavior of short glass fiber reinforced polymers
Guster, C., Pinter, G., Major, Z., Eichlseder, W. & Lang, R., 2007.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Characterisation of the fatigue behavior of short glass fiber reinforced polymers
Guster, C., Pinter, G., Major, Z., Eichlseder, W. & Lang, R., 2007.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Characterisation of the fatigue behavior of short glass fiber reinforced polymers
Guster, C., Pinter, G., Major, Z., Eichlseder, W. & Lang, R., 2007, Polymeric Materials in Automotove PMA. p. 47-49
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Characterisation of the fracture behavior of elastomeres under complex loading conditions
Major, Z., Lederer, K. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 223-224
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Characterisation of the friction behavior of table tennis rubbers
Major, Z. & Lang, R., 2007, International Table Tennis Federation. p. 123-130
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Charakterisierung von Schrumpffolien
Wallner, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Compression tests on sandfilled UP-Resins
Pilz, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Cyclic crack growth tests with CRB specimens for the evaluation of the long-term performance of PE pipe grades
Pinter, G., Haager, M., Balika, W. & Lang, R., 2007, In: Polymer Testing. 26, p. 180-188
Research output: Contribution to journal › Article › Research › peer-review
Published
Determination of time dependent Poisson's ratio values in monotonic and creep tensile experiments
Steinberger, R., Jerabek, M., Major, Z. & Lang, R., 2007.
Research output: Contribution to conference › Poster › Research › peer-review
Published
DSC-Analyse eines Spitzenmaterials
Wallner, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Dynamisch-mechanische Charakterisierung (DMA) von Thermoplasten
Pilz, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Experimental determination of fatigue crack growth behavior and surface strain distribution of 'faint waist pure shear' specimens with different crack tip radii
Feichter, C., Major, Z. & Lang, R., 2007, In: Rubber chemistry and technology. 79, p. 712-733
Research output: Contribution to journal › Article › Research › peer-review
Published
Flatwise Tension Test an Aluminiumkernverbunden
Pinter, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Fracture of poly(vinylidene fluoride): a combined synchrotron and laboratory in-situ X-ray scattering study
Maier, G. A., Wallner, G., Lang, R., Keckes, J., Amentisch, H. & Fratzl, P., 2007, In: Journal of applied crystallography. 40, Supplement April, p. s564-s567
Research output: Contribution to journal › Article › Research › peer-review
Published
Influence of nonylphenol-polyglycol-ether environments on the results of the full notch creep test
Pinter, G., Haager, M. & Lang, R. W., 2007, In: Polymer Testing. p. 700-710
Research output: Contribution to journal › Article › Research › peer-review
Published
Influence of the curing degree on modulus, glass transition temperature and fracture energy of two epoxy resins for composites
Wolfahrt, M., Pilz, G. & Lang, R., 2007.
Research output: Contribution to conference › Poster › Research › peer-review
Published
In-Plane shear properties of reinforced composites with different fiber volume content
Pinter, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
IR-Analyse von Gießharzprofilen
Wallner, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Konfokalmikroskopische Vermessung einer strukturierten Sonnenschutzfolie
Wallner, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Kunststoffe - Neue Möglichkeiten in der Solarthermie
Wallner, G. & Lang, R., 2007, In: VLK-News. p. 19-21
Research output: Contribution to journal › Article › Research › peer-review
Published
Kurzglasfaserverstärkte Kunststoffe - Charakterisierung der Werkstoffanisotropie und Untersuchung deren Einfluss auf das Schwingfestigkeitsverhalten
Guster, C., Eichlseder, W., Pinter, G. & Lang, R., 2007, In: VLK-News. p. 13-18
Research output: Contribution to journal › Article › Research › peer-review
Published
Lifetime and safety assessment of PE pressure pipes based on fracture mechanics fatigue tests
Pinter, G., Haager, M. & Lang, R., 2007, ANTEC 2007. p. 2921-2925
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Literaturrecherche zu viskoelastischen Flüssigkeiten für neuartige Dämpfungselemente
Major, Z. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Material qualification - Determinatin of B-values
Pinter, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Mechanical characterization of liner resin HPM052 for dry and wet material conditions
Pilz, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Mechanische Charakterisierung von glas- und basaltfaserverstärkten Epoxidharzen
Pilz, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Mechanische und schadensanalytische Untersuchungen an Wabenkern-Bauteilen
Major, Z. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Method for measuring biaxial deformation on rubber and polypropylene specimens
Feichter, C., Jerabek, M., Major, Z. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 273-274
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Mikroskopische Analyse einer LC-Folie
Wallner, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
MSRR 1054 Material Change
Pinter, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Qualitatives und quantitatives Verständnis des Walzkontaktes
Major, Z. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Schadensanalytische Untersuchungen an Kunststoff-Rollen im Walzkontakt
Major, Z. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Small strain test system for optical strain measurement systems
Steinberger, R., Jerabek, M., Major, Z. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 393-394
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Some influences on the fatigue behaviour of short-glasfiber-reinforced polymers
Guster, C., Pinter, G., Eichlseder, W. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 125-126
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Systematic investigations of fatigue crack growth behavior of a PE-HD pipe grade in through-thickness direction
Balika, W., Pinter, G. & Lang, R., 2007, In: Journal of Applied Polymer Science. p. 1745-1758
Research output: Contribution to journal › Article › Research › peer-review
Published
Tensile tests for liner resin HPM053 with and without pigment
Pilz, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Tensile tests for UP-Resin distitron 412 V2 with various filler types (dry and wet)
Pilz, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Testing of rail parts according ST 120/20a - AREA in case of heavy load application
Major, Z. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
The influence of fiber-orientation and stress ratio on the fatigue behavior of short-glasfiber-reinforced polymers
Guster, C., Pinter, G., Eichlseder, W. & Lang, R. W., 2007, Society of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007, Conference Proceedings. p. 284-288 5 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 1).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
The influence of fiber-orientation and stress ratio on the fatigue behavior of short-glass-fiber-reinforced plastics
Guster, C., Pinter, G., Eichlseder, W. & Lang, R., 2007, ANTEC 2007. p. 284-288
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Topografiemessung einer ungetemperten und einer getemperten mit Kunststoff beschichteten Aluminiumfolie
Berger, G. R. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Zugprüfungen an glasfaserverstärkten Composites
Pinter, G. & Lang, R., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
2006
Published
Characterisation of the tensile fatigue behaviour of RTM-laminates by isocyclic stress-strain-diagrams
Pinter, G., Ladstätter, E., Billinger, W. & Lang, R. W., Oct 2006, In: International Journal of Fatigue. 28, 10 SPEC. ISS., p. 1277-1283 7 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Accelerated quality assurance tests for PE pipe grades
Pinter, G., Haager, M. J. & Lang, R., 2006, ANTEC 2006. p. 2480-2484
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Aging and aging mechanism of functional polymers for optical applications - WP Report "Untersuchungen an funktionalen Polyolefinen – Teil3 (Diss Oreski)"
Wallner, G., Oreski, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Aging and aging mechanism of functional polymers for optical applications - WP Report "Untersuchungen an Solarabsorbermaterialien (Diss Kahlen)"
Wallner, G., Kahlen, S. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
A novel qualification concept for lifetime and safety assessment of PE pressure pipes for arbitrary installation conditions
Lang, R., Pinter, G., Balika, W. & Haager, M. J., 2006, Plastics Pipes XIII. Plastics Pipes Conference Association, p. 1-10
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Application demonstration and performance of a cellulose triacetate polymer film based transparent insulation wall heating system
Wallner, G., Hausner, R., Hegedys, H., Schobermayr, H. & Lang, R., 2006, In: Solar energy. 80, p. 1410-1416
Research output: Contribution to journal › Article › Research › peer-review
Published
Bestimmung der thermischen Ausdehnung von Epoxidharzwerkstoffen
Pilz, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Bestimmung von Werkstoffkennwerten zur FE-Simulation
Major, Z. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Betriebsfestigkeitsuntersuchungen von faserverstärkten Kunststoffen
Guster, C., Balika, W., Lang, R. & Eichlseder, W., 2006, 1. Leobner Betriebsfestigkeitstage 2006. Montanuniversität Leoben, Lehrstuhl für Allgemeinen Maschinenbau, p. 279-292
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Blind Rivet Pull Out Tests
Pinter, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Characterisation of the Fatigue Behavior of Elastomer Composites
Major, Z., Kovacevic, Z., Kosir, M., Mesec, A. & Lang, R., 2006, 5th International Conference on Mechanics and Materials in Design. INEGI-Instituto de Engenharia Mecânica e Gestão Industrial, p. 391-392
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Characterisation of the fatigue behavior of elastomers and elastomer Composite
Major, Z., Feichter, C., Kovacevic, Z. & Lang, R., 2006, 1. Leobner Betriebsfestigkeitstage 2006. Montanuniversität Leoben, Lehrstuhl für Allgemeinen Maschinenbau, p. 265-277
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Characterization of the Mechanical Behavior of Polyetheretherketone (PEEK)
Major, Z. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Characterization of the tensile fatigue behaviour of RTM-laminates by isocyclic stress-strain diagrams
Pinter, G., Ladstätter, E., Billinger, W. & Lang, R., 2006, In: International Journal of Fatigue. p. 1277-1283
Research output: Contribution to journal › Article › Research › peer-review
Published
Charakterisierung des Oberflächenerscheinungsbildes organisch bandbeschichteter Stahlbleche für Automobilanwendungen
Gruber, D., Wallner, G., Buder-Stroisznigg, M., Strauß, B., Jandel, L. & Lang, R., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 205-208
Research output: Contribution to journal › Article › Research › peer-review
Published
Charakterisierung von Epoxidharzwerkstoffen
Pilz, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Comparison between time-independent FE-Simulation and measurements for two types of rubber
Feichter, C., Major, Z. & Lang, R., 2006, 5th International Conference on Mechanics and Materials in Design. INEGI-Instituto de Engenharia Mecânica e Gestão Industrial, p. 523-524
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Compression / Inplane Shear Tests
Pinter, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Control of the resin transfer moulding process using dielectric and thermal analysis
Wolfahrt, M., Pilz, G., Lang, R. & Ladstätter, E., 2006, Latest advancements of applied composite technology: SAMPE Europe 27th international conference, March 27th - 29th, 2006, Paris EXPO, Porte de Versailles ; proceedings. p. 309-313
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Deformation analysis of notched rubber specimens
Feichter, C., Major, Z. & Lang, R., 2006, In: Strain. p. 299-304
Research output: Contribution to journal › Article › Research › peer-review
Published
Development of a test and fatigue analysis methodology for elastomeric seals exposed to explosive decompression
Major, Z., Lederer, K., Moitzi, M., Mitterhuber, M., Schwarz, T. & Lang, R., 2006, Development of a test and fatigue analysis methodology for elastomeric seals exposed to explosive decompression. p. 1-18
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
DSC-Analyse eines vernetzten Gießharzes
Wallner, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
DSC-Untersuchungen an PE-HD Bauteilen
Pinter, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Dynamische-mechanische Analyse (DMA) von Thermoplasten
Pilz, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Dynamisch-mechanische Untersuchungen und Kriechversuche an Elastomerwerkstoffen
Pilz, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Effect of artificial defects on the fatigue behavior of RTM laminates
Pinter, G., Ladstätter, E. & Lang, R. W., 2006, p. 133-137. 5 p.
Research output: Contribution to conference › Paper › peer-review
Published
Effect of artificial defects on the fatigue behaviour of RTM laminates
Pinter, G., Ladstätter, E. & Lang, R., 2006, ANTEC 2006. p. 133-137
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Ermüdungsversuche an Laminaten
Pinter, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Fatigue crack growth and process zone development in a PE-HD pipe grade in through-thickness direction
Balika, W., Pinter, G. & Lang, R., 2006, In: Advanced engineering materials. p. 1146-1150
Research output: Contribution to journal › Article › Research › peer-review
Published
Flatwise Tension Test an Aluminiumkernverbunden
Pinter, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Heat deflection temperature of neat resins HPM001, HPM002 and HPM054
Pilz, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Impact Tensile Characterization of Polytron-GRF
Steinberger, R. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Influence of Annealing on the Fracture Behavior of 200 µm Thick a-PVDF Films
Wallner, G., Major, Z., Maier, G. & Lang, R., 2006, In: Advanced engineering materials. 8, p. 1140-1145
Research output: Contribution to journal › Article › Research › peer-review
Published
Influence of the curing degree on key resin properties of high Tg epoxy resins for composites
Wolfahrt, M., Pilz, G., Lang, R., Eugen, R., Krumlacher, W. & Plessing, A. K., 2006, proceedings: SAMPE-EUROPE 2006, Paris, F.. p. 314-319
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Influence of the curing degree on modulus, glass transition temperature and fracture energy of two epoxy resins for composites
Wolfahrt, M., Pilz, G. & Lang, R., 2006.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Infrared thermographic techniques for non-destructive damage characterization of carbon fibre reinforced polymers during tensile fatigue testing
Steinberger, R., Leitao, T. I. V., Ladstätter, E., Billinger, W., Pinter, G. & Lang, R., 2006, In: International Journal of Fatigue. p. 1340-1347
Research output: Contribution to journal › Article › Research › peer-review
Published
IR-spektroskopische Analysen an coextrudierten Rohrmustern
Balika, W. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Kunststoffe - Neue Möglichkeiten in der Solarthermie
Wallner, G. & Lang, R., 2006, In: Erneuerbare Energie. p. 10-12
Research output: Contribution to journal › Article › Research › peer-review
Published
Materialanalyse an extrudierten Verpackungsfolien
Wallner, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Materialvergleich für Schiebedeckeln von Kühltruhen
Steinberger, R. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Mechanische und thermoanalytische Tests an Composite Laminaten
Pinter, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Moisture absorption of liner resins
Pilz, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Polymeric Materials for Sustainable Development - WP Report "Polymere Nanocomposites für die Solartechnik"
Gruber, D., Wallner, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Polymeric Materials for Sustainable Development - WP Report "Symposium/IEA-Task “Materialien für die Solartechnik”"
Wallner, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Prüfungs- und Versagensanalyse für die explosive Dekompression elastomerer Dichtungen
Major, Z., Lederer, K., Moitzi, M., Mitterhuber, M., Schwarz, T. & Lang, R., 2006, In: GAK : Gummi, Fasern, Kunststoffe. p. 685-694
Research output: Contribution to journal › Article › Research › peer-review
Published
Ranking of PE pipe grades by cyclic crack growth tests with cracked round bar specimens
Pinter, G., Haager, M. J. & Lang, R., 2006, ANTEC 2006. p. 2475-2479
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Ranking of polyethylene pipe materials using fatigue loading of cracked round bar specimens
Haager, M. J., Pinter, G., Balika, W. & Lang, R., 2006, Plastics Pipes XIII. Plastics Pipes Conference Association, p. 1-11
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Ranking of Polyethylene pipe materials using fatigue loading of cracked round bar specimens
Haager, M. J., Pinter, G., Balika, W. & Lang, R., 2006.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Rauigkeitsmessungen an unterschiedlichen Kunststofffolien
Balika, W. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Tensile, Bending and Charpy Tests for GF-UP Materials W1 and W2
Pilz, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Tensile, Bending and Charpy Tests for Hybrid Materials W32 and W42
Pilz, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Tensile tests for neat resin and calciumcarbon-ate filled resin formulations of Distitron 412 V2
Pilz, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Test and failure analyses methodology for elastomeric seals exposed to explosive decompression
Major, Z., Lederer, K., Moitzi, M., Mitterhuber, M., Schwarz, T. & Lang, R., 2006, In: Rubber, fibres, plastics international. p. 93-100
Research output: Contribution to journal › Article › Research › peer-review
Published
The Test Frequency dependence of the fatigue behavior of elastomers
Major, Z., Feichter, C., Steinberger, R. & Lang, R., 2006, Fracture of Nano and Engineering Materials. Springer, p. 777-784
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Trommelschälversuch an Aluminiumkernverbunden
Pinter, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Untersuchungen an Polypropylen für eine Beizbeckenanwendung
Balika, W. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Vergleichende Untersuchungen flächen- und kalandergeprägter PET-Laminatfolien
Wallner, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Zugversuche an Kunststoffketten
Pilz, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Zugversuche an PET-Verpackungsbändern
Pilz, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Zugversuche an stumpfgeschweißten Polyethylenrohren nach EN 12814-2
Haager, M. J. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Zugversuch und Härteprüfung an Silikonelastomeren
Wallner, G. & Lang, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
2005
Published
Adaptierung der prüftechnischen Einrichtungen zur mechanischen Prüfung von Klebstoffverbindungen
Lang, R., Pilz, G. & Wolfahrt, M., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Aging and aging mechanism of functional polymers for optical applications - WP Report "Untersuchungen an funktionalen Polyolefinen – Teil2 (DA Eder)"
Wallner, G., Eder, R. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Aging of polymeric films for transparent insulation wall applications
Wallner, G. & Lang, R., 2005, In: Solar energy. 79, p. 603-611
Research output: Contribution to journal › Article › Research › peer-review
Published
Anforderungsprofil für kalthärtende Klebstoffe im Flugzeuginnenraum
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Anwendung dere SIS/DSC-Methodik auf PE Werkstoffe
Haager, M. J., Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Applicability and limitations of various fracture mechanical testing concepts under static and cyclic loads
Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Bending tests for TP-GFUP hybrid materials
Pilz, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Bestimmung der Bruchkraft von Kunststoffketten im monotonen Zugversuch
Pilz, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Bestimmung der Glasübergangstemperatur mit dynamisch-mechanischer Analyse (DMA)
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Bestimmung der Zugeigenschaften von Folien aus Infusionsbeuteln (Phase 6)
Pilz, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Blocker Door fretting fatigue test
Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Blocker Door fretting fatigue test - Karon B coating
Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Brittle and ductile failure behavior of PE pipe grades
Pinter, G., Major, Z., Haager, M. J. & Lang, R., 2005.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Bruchmechanische Eigenschaften von gehärteten Epoxidharzen
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Characterization of the failure behavior of elastomers by fracture mechanics methods
Major, Z., Balika, W., Feichter, C., Steinberger, R. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Characterization of the tensile-compression fatigue behavior of RTM-laminates by isocyclic stress-strain diagrams
Ladstätter, E., Pinter, G. & Lang, R., 2005.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Charakterisierung der Auswirkungen unterschiedlicher Laminatvorbehandlung (Sandstrahlen) auf die Oberflächenqualität und den GIC-Wert von verklebten Laminaten
Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Charakterisierung des Ermüdungsrisswachstums in PE mit CT Proben - Methodenentwicklung
Haager, M. J., Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Charakterisierung des Impactverhaltens von PE-Methodenentwicklung
Haager, M. J., Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Charakterisierung transparenter Formstoffe für Skier
Wallner, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Charpy tests for TP-GFUP hybrid materials
Pilz, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Comparison of thermomechanical properties and creep behaviour of HPM001 and HPM100
Pilz, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Compression tests for pipe wall specimens
Pilz, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Compression tests for pipe wall specimens, contacting and non-contacting deformation measurements
Pilz, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Compression Tests on a Hobas CC-GRP Pipe Material
Pilz, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Curing Process Control for Neat Resins by DSC, DMA and DEA
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Deformation behavior of polyolefins under monotonic loading - development and implementation of test methods
Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Determination of "True Stress vs. True Strain" Data for Thin Molybdenum Sheets
Major, Z. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Development and implementation of non-contact strain and deformation test methods for polymeric materials and components
Fauster, E., Steinberger, R., Major, Z., O'Leary, P. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Development of fatigue test methods for elastomers - Standard and complex methods
Feichter, C., Major, Z. & Lang, R., 2005.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Dielektrische Analyse (DEA) - Geräte und Leistungsmerkmale
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
DMA-Ringversuch
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Druckversuche an Composite-Proben - Compression strength and modulus measurements
Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Druckversuche an Flugzeugbauteil-Komponenten
Pilz, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Druckversuche an Kalibrierkörpern (Flugzeugbauteil-Komponenten)
Pilz, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
DSC-Messungen an Achsen aus PBT-GF30
Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Dynamic mechanical analysis for liner resins
Pilz, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Dynamisch-mechanische Analyse (DMA) von Epoxidharzen
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Effect of frequency, R-ratio and test specimen configuration on fatigue crack growth in PE pipe materials
Balika, W., Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Einfluss der Härtungsbedingungen auf Reinharz-Schlüsseleigenschaften
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Einfluss des Aushärtegrades auf wesentliche Werkstoffeigenschaften eines Epoxidharz - Matrixwerkstoffes
Wolfahrt, M., Pilz, G. & Lang, R., 2005, 15. Symposium: Verbundwerkstoffe und Werkstoffverbunde. p. 199-204
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Entwicklung von Gießformen für die Reinharzhärtung
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Ermüdungsrisswachstumsversuche an CT Proben aus PE bei 10 Hz
Haager, M. J., Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Fatigue behavior of RTM laminates
Ladstätter, E., Pinter, G., Billinger, W. & Lang, R., 2005, In: VLK-News. p. 4-7
Research output: Contribution to journal › Article › Research › peer-review
Published
Fatigue crack growth in PE-HD pipe grades
Pinter, G., Haager, M. J., Balika, W. & Lang, R., 2005, In: Plastics, rubber and composites. 34, p. 25-33
Research output: Contribution to journal › Article › Research › peer-review
Published
Fatigue of Glass-Fiber Reinforced Plastics - Characterization Methods and Structure-Property-Relationsships
Zahnt, B.-A. & Lang, R., 2005, Series on Advances in Experimental Mechanics Volume 9. p. 107-144
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Feuchteaufnahmeverhalten von gehärteten Epoxidharzen
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Fracture mechanical tests for HPM001
Pilz, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Fracture mechanical tests for liner resins
Pilz, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Guest Editoral
Wallner, G. & Lang, R., 2005, In: Solar energy. p. 571-572
Research output: Contribution to journal › Article › Research › peer-review
Published
Härtungscharakterisierung von Reinharzen mit dynamischer Differ-enzkalorimetrie (DSC)
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Impact bending tests (Charpy) for liner resins
Pilz, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Influence of crack tip sharpness and radius on the strain distribution in rubbers analyzed by finite element simulation and experiments
Feichter, C., Major, Z. & Lang, R., 2005, In: VLK-News. p. 6-12
Research output: Contribution to journal › Article › Research › peer-review
Published
Influence of crack tip sharpness and radius on the strain distribution in rubbers analyzed by finite element simulation experiments
Feichter, C., Major, Z. & Lang, R., 2005, European Conference on Constitutive Models for Rubber IV (ECCMR 2005). Balkema, p. 89-95
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Instrumentierte Impactversuche an Rohren aus Polypropylen in Anlehnung an EN 744
Major, Z. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Interlaminare Scherfestigkeitsmessungen - Interlaminar sher strength (ILSS) measurements
Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Interlaminar shear tests for TP-GFUP hybrid materials
Pilz, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Investigations on a crack containing elastomer/metal component
Major, Z. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Konzept zur Nachweisführung für Nutzungsdauer und Sicherheit von PE-Druckrohren bei beliebiger Einbausituation
Lang, R., Pinter, G. & Balika, W., 2005, In: 3 R international. 44, p. 33-41
Research output: Contribution to journal › Article › Research › peer-review
Published
Kunststofftechnische Aspekte bei der Entwicklung organisch bandbeschichteter Stahlbleche für Automobilanwendungen
Buder-Stroizsnigg, M., Wallner, G., Gruber, D., Strauss, B., Jandel, L. & Lang, R., 2005, In: Berg- und hüttenmännische Monatshefte : BHM. 150, p. 293-300
Research output: Contribution to journal › Article › Research › peer-review
Published
Literatur- und Marktrecherche nach potentiell geeigneten Klebstoffsystemen für Flugzeuginnenanwendungen
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Low Temperature Cure Adhesives for Aircraft Interior Applications with Phenolic Matrix Composites - Feasibility Study and Material Characterization
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Materialanalyse an spritzgegossenen Abdeckkappen für Solar-Wechselrichter
Wallner, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Materialuntersuchung an Kunststoffschlägel
Wallner, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Mechanical and thermal investigations on materials for head covers used in medium-voltage applications
Balika, W. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Mechanische Eigenschaften kohlenfaserverstärkter RTM-Laminate bei monotoner und zyklischer Zugbelastung
Ladstätter, E., Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Mechanische und thermo-kalorimetrische Charakterisierung von kalt-härtenden Klebstoffen
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Methodikentwicklung für die Klebstoffcharakterisierung
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Methodikentwicklung für eine Klebstoffspezifikation
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Methodikentwicklung zur Reinharzoptimierung
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Optimierung der Härtungsparameter für die Reinharzplattenherstellung
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Planung, Bau und Implementierung eines FNCT-Prüfstandes
Haager, M. J., Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Polymeric Materials for Sustainable Development - WP Report "Polymere Nanocomposites für die Solartechnik"
Gruber, D., Wallner, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Prüfnormen und Regelwerke für Klebeverbindungen im Flugzeugbau
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Ranking of PE pipe grades by their failure behavior under impact loads
Pinter, G., Major, Z., Haager, M. J. & Lang, R., 2005, ANTEC. p. 3551-3555
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Ranking von PE-Rohrwerkstoffen mittels Ermüdungsrisswachstum
Hiesch, T. J., Haager, M. J., Pinter, G. & Lang, R., 2005, 10 Tagung Problemseminar: Deformation und Bruchverhalten von Kunststoffen. p. 1-6
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Ranking von PE-Rohrwerkstoffen mittels Ermüdungsrisswachstum
Hiesch, T. J., Haager, M. J., Pinter, G. & Lang, R., 2005.
Research output: Contribution to conference › Poster › Research › peer-review
Published
REM Untersuchungen von Pulver-Oberflächen
Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Risswachstumsverhalten von PE-Rohrwerkstoffen
Haager, M. J., Pinter, G., Balika, W. & Lang, R., 2005, 10 Tagung Problemseminar: Deformation und Bruchverhalten von Kunststoffen. p. 1-10
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Scanning X-ray scattering study on structural changes at crack tips in PVDF
Maier, G., Wallner, G., Lang, R. & Fratzl, P., 2005.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Statische Versuche an CT-Proben aus PE
Haager, M. J., Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Structural Changes during Plastic Deformation at Crack Tips in PVDF Films: A Scanning X-ray Scattering Study
Maier, G., Wallner, G., Lang, R. & Fratzl, P., 2005, In: Macromolecules. 38, p. 6099-6105
Research output: Contribution to journal › Article › Research › peer-review
Published
Structural changes during plastic deformation at crack tips of PVDF films - A semiquantative analysis
Maier, G., Wallner, G., Lang, R. & Fratzl, P., 2005, 15th International Conference on Composite Materials (ICCM-15). Centre for Composite and Smart Materials and Structures, p. 6-6
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Structure–property correlations of polymeric films for transparent insulation wall applications. Part 1: Solar optical properties
Wallner, G., Platzer, W. & Lang, R., 2005, In: Solar energy. 79, p. 583-592
Research output: Contribution to journal › Article › Research › peer-review
Published
Structure-property correlations of polymeric films for transparent insulation wall applications. Part 2: Infrared optical properties
Wallner, G., Platzer, W. & Lang, R., 2005, In: Solar energy. p. 593-602
Research output: Contribution to journal › Article › Research › peer-review
Published
Studies of Creep and Fatigue Crack Growth in HD-PE-pipe materials
Haager, M. J., Pinter, G., Lang, R. & Zhou, W., 2005, ANTEC. p. 3538-3542
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Temperierte Kriechversuche an Kunststoffscheiben
Pilz, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Tensile-compression fatigue behavior of RTM-laminates
Ladstätter, E., Pinter, G. & Lang, R., 2005, SAMPE Fall Technical Conference. p. 1-11
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Tensile strength and tensile modulus measurements
Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Tensile tests for liner resins
Pilz, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Tensile tests for TP-GFUP hybrid materials
Pilz, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Test der Subkomponente "lug CHF" Lug subcomponent test
Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Thermoanalytische umd morphologische Untersuchungen an Achsen aus PBT-GF30
Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Thermographische Verfahren zur Schadensdetektion an kohlenstofffaserverstärkten RTM-Laminaten in Ermüdungsversuchen
Ladstätter, E., Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Thermokalorimetrische Charakterisierung (DSC) von gehärteten Reinharzplatten
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Thermokalorimetrische Charakterisierung (DSC) von ungehärteten u. gehärteten Reinharzen
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Thermomechanische Eigenschaften von gehärteten Epoxidharzen
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Through thickness characterization of crack growth and process zone development in cyclically loaded PE-HD
Balika, W., Pinter, G. & Lang, R., 2005.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Through-thickness process zone characterization at fatigue cracks in PE-HD
Balika, W., Pinter, G. & Lang, R., 2005, ANTEC. p. 3512-3516
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Time and Cycle dependent crack growth and crack tip yielding in PE pipe materials
Balika, W., Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Trommelschälversuch an Wabenkernverbunden
Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Umsatzabhängigkeit von Reinharz-Schlüsseleigenschaften
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Untersuchungen an Nutverschlusskeilen
Major, Z. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Untersuchungen zu thermischen Ausdehnungs-koeffizienten und zur Nachkristallisation von PP-Formulierungen
Balika, W. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Werkstoffdatenblätter für Epoxidharzformulierungen
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Werkstoffvorauswahl und Charakterisierung von Werkstoffen für neuartige Federkomponenten in Lautsprechern
Balika, W. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Werkstoffvorauswahl und Charakterisierung von Werkstoffen für neuartige Federkomponenten in Lautsprechern (Phase II: Charakterisierung von ausgewählten Werkstoffen)
Balika, W. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Zugeigenschaften von gehärteten Epoxidharzen
Pilz, G., Wolfahrt, M. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Zugprüfungen an GFK-Kettenelementen
Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Zugprüfungen an Polyazetal (POM)-Ketten
Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Zugprüfungen an Polyoxymethylen (POM)-Ketten
Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Zugprüfungen an PP-und POM-Kettenelementen des Typs Rübig 50
Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Zugversuch an einem Composite - Bauteil IP 980 flange test
Pinter, G. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Zugversuche an Proben aus stumpfgeschweißten Polyethylenrohren nach EN 12814-2
Haager, M. J. & Lang, R., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
2004
Published
Estimation of slow crack growth behavior in polyethylene after stepwise isothermal crystallization
Haager, M., Pinter, G. & Lang, R. W., Oct 2004, In: Macromolecular Symposia. 217, p. 383-390 8 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
A fatigue approach for lifetime prediction of PE-HD pipe grades
Balika, W., Pinter, G., Choi, B.-H. & Lang, R., 2004, Society of Plastics Engineers. p. 4028-4032
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Aktuelles aus Wissenschaft und Forschung - Kunststoffrohre 2004: 18. Leobener Kunststoffkolloquium
Pinter, G. (Editor) & Lang, R. (Editor), 2004, Leoben: Eigenverlag.
Research output: Book/Report › Anthology › Research
Published
Applicability and limitations of the FNCT-methodology to predict the long term failure behavior of polyethylene-pipe materials
Haager, M., Pinter, G. & Lang, R. W., 2004, p. 4023-4027. 5 p.
Research output: Contribution to conference › Paper › peer-review
Published
Applicability and limitations of the FNCT-methodology to predict the long term failure behaviour of polyethylene pipe materials
Haager, M. J., Pinter, G. & Lang, R., 2004, Society of Plastics Engineers. p. 4023-4027
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Applicability of linear elastic fracture mechanics to fatigue in amorphous and semi-crystalline polymers
Lang, R., Balika, W. & Pinter, G., 2004, The Application of Fracture Mechanics to Polymers, Adhesvies and Composites. p. 83-92
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Beschleunigte Prüfmethoden zur Charakterisierung des Langzeitversagensverhaltens von thermoplastischen Rohrwerkstoffen
Haager, M. J., Pinter, G. & Lang, R., 2004, Aktuelles aus Wissenschaft und Forschung - Kunststoffrohre 2004. Polymer Competence Center Leoben, Institut für Werkstoffkunde und -prüfung der Kunststoffe, p. VI-1-VI-13
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Characterisation of the fatigue behaviour of RTM-laminates by isocyclic stress-strain diagrams
Ladstätter, E., Pinter, G., Billinger, W. & Lang, R., 2004, Society of Plastics Engineers. p. 1379-1383
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Characterization of the fatigue behavior of RTM-laminates by isocyclic stress-strain diagrams
Ladstätter, E., Pinter, G., Billinger, W. & Lang, R. W., 2004, p. 1379-1383. 5 p.
Research output: Contribution to conference › Paper › peer-review
Published
Characterizsation of Table Tennis Racket Sandwich Rubbers
Major, Z. & Lang, R., 2004, 8th Internationale Table Tennis Federation Sports Science Congress and the 3rd Qorld Congress of Science and Racket Sports. p. 146-151
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Creep crack growth in high density polyethylene
Pinter, G. & Lang, R., 2004, The Application of Fracture Mechanics to Polymers, Adhesvies and Composites. p. 49-54
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Ermüdungsrisswachstum in PE-Rohrwerkstoffen
Haager, M. J., Pinter, G. & Lang, R., 2004, In: 3 R international. p. 492-496
Research output: Contribution to journal › Article › Research › peer-review
Published
Ermüdungsverhalten karbonfaserverstärkter RTM-Laminate
Ladstätter, E., Pinter, G., Billinger, W. & Lang, R., 2004, Int. Conference, European Chapter. p. 1-10
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Estimation of slow crack growth behavior in Polyethylen after stepwise isothermal segregation
Haager, M. J., Pinter, G. & Lang, R., 2004, In: Macromolecular Symposia. 217, p. 383-390
Research output: Contribution to journal › Article › Research › peer-review
Published
Investigation of heat dissipation of RTM laminates under tensile fatigue loading by thermography
Leitao, T. I. V., Steinberger, R., Ladstätter, E., Pinter, G., Billinger, W. & Lang, R., 2004.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Local deformation and failure at crack tips in thermoplastic pipe grades
Pinter, G., Balika, W. & Lang, R., 2004, Aktuelles aus Wissenschaft und Forschung - Kunststoffrohre 2004. Polymer Competence Center Leoben, Institut für Werkstoffkunde und -prüfung der Kunststoffe, p. IX-1-IX-10
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Moderne Prüfmethoden für Polyethylen-Rohrwerkstoffe
Haager, M. J., Pinter, G. & Lang, R., 2004, In: VLK-News. p. 2-3
Research output: Contribution to journal › Article › Research › peer-review
Published
Ranking of PE-HD pipe grades by fatigue crack growth performance
Pinter, G., Haager, M. J., Balika, W. & Lang, R., 2004, Plastics Pipes XII. p. 1-10
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Rate dependent fracture of polymers - applicability and limitation of force based fracture mechanics approaches
Major, Z. & Lang, R., 2004, The Application of Fracture Mechanics to Polymers, Adhesvies and Composites. p. 39-46
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Thermo-oxidative degradation during creep crack growth of PE-HD grades as assessed by FT-IR spectroscopy
Pinter, G., Haager, M. J., Wolf, C. & Lang, R., 2004, In: Macromolecular Symposia. 217, p. 307-316
Research output: Contribution to journal › Article › Research › peer-review
2003
Published
Advanced methodologies for the characterisation of the performance of long-term thermal antioxidants
Pinter, G. & Lang, W. R., 2003, p. 124-128. 5 p.
Research output: Contribution to conference › Paper › peer-review
Published
Advanced methodologies for the characterization of the performance of long-term thermal antioxidants
Pinter, G. & Lang, R., 2003, 3. European Additives and Colors Conference. p. 124-128
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Effect of stabilization on creep crack growth in High-Density Polyethylene
Pinter, G. & Lang, R., 2003, In: Journal of Applied Polymer Science. 90, p. 3191-3207
Research output: Contribution to journal › Article › Research › peer-review
Published
Einsatz von statischen und zyklischen bruchmechanischen Methoden zur Charakterisierung von Polyethylen Rohrleitungswerkstoffen
Haager, M. J., Pinter, G., Fanesi, E. & Lang, R., 2003, 6. Bregenzer Rohrleitungstage – Fachausstellung. p. 1-16
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Estimation of slow crack growth behaviour in Polyethylene after stepwise isothermal segregation
Haager, M. J., Pinter, G. & Lang, R., 2003.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Polymeric Solar Materials
Lang, R. (Editor) & Wallner, G. (Editor), 2003, Eigenverlag.
Research output: Book/Report › Anthology › Research
Published
Prüfmethoden für die Entwicklung von Rohrwerkstoffen
Pinter, G., Pilz, G., Balika, W. & Lang, R., 2003, Polymeric Solar Materials. p. IX-1-IX-8
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2002
Published
Characterisation of the thermo-oxidative degradation of polyethylene pipes by chromatographical, rheological and thermo-analytical methods
Pinter, G., Duretek, I., Aust, N. & Lang, R. W., 24 Jun 2002, In: Macromolecular Symposia. 181, p. 213-223 11 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
A correlation of creep and fatigue crack growth in high density polyethylen at various temperatures
Pinter, G., Balika, W. & Lang, R., 2002, Temperatur-Fatigue Interaction. p. 267-277
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
A correlation of creep and fatigue crack growth in high density poly(ethylene) at various temperatures
Pinter, G., Balika, W. & Lang, R. W., 2002, In: ESIS publication / European Structural Integrity Society. 29, C, p. 267-275 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Bruchmechanische Charakterisierung und Simulation des Zeitstandverhaltens von Rohren aus PE-HD
Pinter, G. & Lang, R., 2002.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Bruchmechanische Charakterisierung und Simulation des Zeitstandverhaltens von Rohren aus PE-HD
Pinter, G. & Lang, R., 2002, 7. Tagung Gefüge und Bruch. p. 1-5
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Characterisation of the effects of surface treatment of graphite as a filler in Polypropylene (PP) on fracture toughness under monotonic and cyclic loads
Pinter, G., Schnetzinger, K., Lang, R., Lederer, K. & Zipper, P., 2002, Polymerwerkstoffe 2002. p. 557-560
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Characterisation of the Thermo-Oxidative Degradation of Polyethylene Pipes by Chromatographical, Rheological and Thermoanalytical Methods
Pinter, G., Duretek, I., Aust, N. & Lang, R., 2002, In: Macromolecular Symposia. 181, p. 213-213
Research output: Contribution to journal › Article › Research › peer-review
Published
Ermüdungsrisswachstum in thermoplastischen Polymeren
Pinter, G., Balika, W., Zahnt, B.-A. & Lang, R., 2002, 7. Tagung Gefüge und Bruch. p. 1-5
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Ermüdungsrisswachstum in thermoplastischen Polymeren
Pinter, G., Balika, W., Zahnt, B.-A. & Lang, R., 2002.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Fatigue crack growth in PE-HD
Pinter, G. & Lang, R., 2002.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Impact fracture toughness of polymers
Major, Z. & Lang, R., 2002, In: VLK-News. p. 9-12
Research output: Contribution to journal › Article › Research › peer-review
2001
Published
Applicability and limitations of current lifetime prediction models for thermoplastics pipes under internal pressure
Lang, R., Pinter, G. & Stern, A., 2001, Plastics Pipes XI. p. 329-338
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Facture mechanics characterisation of effects of stabilisers on creep crack growth in Polyethylene pipes
Pinter, G. & Lang, R., 2001, In: Plastics, rubber and composites. 30, p. 94-100
Research output: Contribution to journal › Article › Research › peer-review
Published
Fracture mechanics characterisation of effects of stabilisers on creep crack growth in polyethylene pipes
Pinter, G. & Lang, R. W., 2001, In: Plastics, Rubber and Composites Processing and Applications. 30, 2, p. 94-100 7 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
The influence of local ageing on brittle failure of thermoplastics pipes
Pinter, G. & Lang, R., 2001, Plastics Pipes XI. p. 853-862
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
The influence of local ageing on brittle failure of thermoplastics pipes
Pinter, G. & Lang, R., 2001.
Research output: Contribution to conference › Poster › Research › peer-review
2000
Published
Aging effects and fracture mechanical lifetime modelling of pressurized Polyethylene pipes
Lang, R., Pinter, G. & Stern, A., 2000, ECF 13. p. 1-6
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Aging effects and fracture mechanical lifetime modelling of pressurized Polyethylene pipes
Lang, R., Pinter, G. & Stern, A., 2000.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Characterisation of stabiiser effects on the creep crack growth failure behaviour of polyethylene pipes using a fracture mechanics approach
Pinter, G. & Lang, R., 2000, Yield and Fracture of Polymers. p. 425-430
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Characterisation of stabiliser effects on the creep crack growth failure behaviour of polyethylene pipes using a fracture mechanics approach
Pinter, G. & Lang, R., 2000.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Creep and fatigue crack growth in PE-HD pipe grades - Effect of test temperature and R-ratio
Pinter, G., Balika, W. & Lang, R., 2000.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Innovationen und Entwicklungstendenzen auf dem Gebiet der Faser/kunststoff-Verbunde: 16. Leobener Kunststoffkolloquium
Lang, R. (Co-editor) & Pinter, G. (Co-editor), 2000, Leoben: Eigenverlag.
Research output: Book/Report › Anthology › Research
Published
Neue Prüfkonzepte zur Charakterisierung von Polyolefinen
Lang, R., Pilz, G., Pinter, G. & Stern, A., 2000, In: Plastics-special. 6, p. 26-31
Research output: Contribution to journal › Article › Research › peer-review

Research Portal

Reinhold Lang

Research output