Reinhold Lang

(Former)

Research output

  1. 2017
  2. Published

    Fracture mechanics methods to assess the lifetime of thermoplastic pipes

    Arbeiter, F., Pinter, G., Lang, R. W. & Frank, A., 2017, Springer Series in Materials Science. Springer Berlin, Vol. 247. p. 33-54 22 p. (Springer Series in Materials Science; vol. 247).

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  3. 2012
  4. Published

    Thermotropic Layers for Overheating Protection of all-Polymeric Flat Plate Solar Collectors

    Resch, K., Hausner, R., Wallner, G. M. & Lang, R., 2012, Polymeric Materials for Solar Thermal Applications. p. 255-265

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  5. 2011
  6. Published

    On the determination of the relaxation modulus of PP compounds from arbitrary strain histories

    Tscharnuter, D., Jerabek, M., Major, Z. & Lang, R., 2011, In: Mechanics of time-dependent materials. 15, 1, p. 01-14

    Research output: Contribution to journalArticleResearchpeer-review

  7. Published

    Time-dependent poisson’s ratio of polypropylene compounds for various strain histories

    Tscharnuter, D., Jerabek, M., Major, Z. & Lang, R., 2011, In: Mechanics of time-dependent materials. 15, 1, p. 15-28

    Research output: Contribution to journalArticleResearchpeer-review

  8. 2010
  9. Published

    Aging behavior and lifetime modeling for polycarbonate

    Kahlen, S., Wallner, G. & Lang, R., 2010, In: Solar energy. p. 755-762

    Research output: Contribution to journalArticleResearchpeer-review

  10. Published

    Aging behavior of polymeric absorber materials for solar thermal collectors

    Kahlen, S., Wallner, G. & Lang, R., 2010, Proceedings of P2010, 14th International Scientific Conference on Polymeric Materials.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  11. Published

    Aging behavior of polymeric solar absorber materials: Aging on the component level

    Kahlen, S., Wallner, G., Lang, R., Meir, M. & Rekstad, J., 2010, In: Solar energy. p. 459-465

    Research output: Contribution to journalArticleResearchpeer-review

  12. Published

    Characterization of physical and chemical aging of polymeric solar materials by mechanical testing

    Kahlen, S., Jerabek, M., Wallner, G. & Lang, R., 2010, In: Polymer Testing. p. 72-81

    Research output: Contribution to journalArticleResearchpeer-review

  13. Published

    Characterization of the fracture behavior of NBR and FKM grade elastomers for oilfield applications

    Major, Z. & Lang, R., 2010, In: Engineering Failure Analysis. p. 701-711

    Research output: Contribution to journalArticleResearchpeer-review

  14. Published

    Development and Characterization of polymeric thermotropic materials for overheating protectiion of solar collectors

    Resch, K., Wallner, G. & Lang, R., 2010, Society of Plastics Engineers. p. 1127-1130

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  15. Published

    Filler/matrix-debonding and micro-mechanisms of deformation in particulate filled polypropylene composites under tension

    Jerabek, M., Major, Z., Renner, K., Moczo, J., Pukanszky, B. & Lang, R., 2010, In: Polymer. p. 2040-2048

    Research output: Contribution to journalArticleResearchpeer-review

  16. Published

    Strain determination of polymeric materials using digital image correlation

    Jerabek, M., Major, Z. & Lang, R., 2010, In: Polymer Testing. p. 407-416

    Research output: Contribution to journalArticleResearchpeer-review

  17. Published

    Uniaxial compression testing of polymeric materials

    Jerabek, M., Major, Z. & Lang, R., 2010, In: Polymer Testing. p. 302-309

    Research output: Contribution to journalArticleResearchpeer-review

  18. 2009
  19. Published

    A fracture mechanics concept for the accelerated characterization of creep crack growth in PE-HD pipe grades

    Frank, A., Freimann, W., Pinter, G. & Lang, R., 2009, In: Engineering Fracture Mechanics. 76, p. 2780-2787

    Research output: Contribution to journalArticleResearchpeer-review

  20. Published

    Ageing characterization of commercial ethylene copolymer greenhouse films by analytical and mechanical methods

    Oreski, G., Wallner, G. & Lang, R., 2009, In: Biosystems engineering. 103, p. 489-496

    Research output: Contribution to journalArticleResearchpeer-review

  21. Published

    Aging of polymers in solar-thermal applications, Final Report

    Wallner, G., Kahlen, S. & Lang, R., 2009

    Research output: Book/ReportCommissioned reportTransferpeer-review

  22. Published
  23. Published
  24. Published
  25. Published

    Characterization and simulation of the micromechanical behaviour of particulate filled polypropylene compounds under creep loading

    Gastl, S., Jerabek, M., Major, Z. & Lang, R., 2009.

    Research output: Contribution to conferencePosterResearchpeer-review

  26. Published

    Close-Fit Relining - Verfahrensbedingte Beeinflussung der Werkstoffeigenschaften und des Rohrlangzeitverhaltens

    Frank, A., Haager, M., Hofmann, A., Pinter, G. & Lang, R., 2009, ÖGL Symposium Grabenlos. p. 54-66

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  27. Published

    Crack growth in polyethylene (PE-HD) - from macroscopic failure to molecular failure mechanisms

    Lang, R., Pinter, G., Frank, A. & Haager, M., 2009, EPF'09 European polymer congress. p. 121-121

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  28. Published

    Development and characterization of novel two-layer high performance coil coatings for the buildings industry, Final Report

    Wallner, G., Buder-Stroisznigg, M., Fischer, J. & Lang, R., 2009

    Research output: Book/ReportCommissioned reportTransferpeer-review

  29. Published
  30. Published
  31. Published
  32. Published
  33. Published

    Diverse Messungen an Polypropylen-Talk Compounds

    Pinter, G. & Lang, R., 2009

    Research output: Book/ReportCommissioned reportTransferpeer-review

  34. Published

    Dynamisch-Mechanische Analyse (DMA) an PMMA-Folien

    Pilz, G. & Lang, R., 2009

    Research output: Book/ReportCommissioned reportTransferpeer-review

  35. Published

    Dynamisch-Mechanische Analyse (DMA) von Folienwerkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/ReportCommissioned reportTransferpeer-review

  36. Published

    Dynamisch-Mechanische Analyse (DMA) von Thermoplastwerkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/ReportCommissioned reportTransferpeer-review

  37. Published
  38. Published
  39. Published
  40. Published
  41. Published

    Effects of temperature and moisture on the tensile/tensile fatigue behavior of an injection molded sgf-reinforced partial aromatic polyamide

    Guster, C., Pinter, G., Eichlseder, W. & Lang, R., 2009, 12th International Conference on Fracture, ICF 13. p. 1-9

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  42. Published

    Filler/matrix-debonding and micro-mechanisms of deformation in particulate filled pp composites under tension

    Jerabek, M., Major, Z. & Lang, R., 2009, Euro Fillers 2009. p. 18-22

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  43. Published

    Flexible clear coats - Effect of curing conditions

    Buder-Stroisznigg, M., Wallner, G., Strauß, B., Jandel, L. & Lang, R., 2009, In: Progress in organic coatings. 65, p. 44-48

    Research output: Contribution to journalArticleResearchpeer-review

  44. Published

    Lifetime prediction of polyethylene pipes based on an accelerated extrapolation concept for creep crack growth with fatigue tests on cracked round bar specimens

    Frank, A., Pinter, G. & Lang, R., 2009, ANTEC 2009 Society of Plastics Engineers' Annual Technical Conference. p. 2169-2174

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  45. Published

    Lifetime Prediction of the Fatigue crack growth (FCG) of high density polyethylene (HDPE) by crack layer theory

    Choi, B.-H., Balika, W., Chudnovsky, A., Pinter, G. & Lang, R., 2009, In: Polymer engineering and science. 49, p. 1421-1428

    Research output: Contribution to journalArticleResearchpeer-review

  46. Published

    Mechanische Charakterisierung von CFK-Werkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/ReportCommissioned reportTransferpeer-review

  47. Published

    Prediction of the remaining lifetime of polyethylene pipes after up to 30 years in use

    Frank, A., Pinter, G. & Lang, R., 2009, In: Polymer Testing. 49, p. 737-745

    Research output: Contribution to journalArticleResearchpeer-review

  48. Published

    Special topics of polymer science and advanced characterization methods, Final Report

    Wallner, G., Fischer, J., Oreski, G., Resch, K. & Lang, R., 2009

    Research output: Book/ReportCommissioned reportTransferpeer-review

  49. Published

    Special topics of polymer science and advanced characterization methods, WP Report Fortschrittliche IR Spektroskopie

    Oreski, G., Wallner, G. & Lang, R., 2009

    Research output: Book/ReportCommissioned reportTransferpeer-review

  50. Published
  51. Published
  52. Published

    Thermische Untersuchungen an glasfaserverstärkten PA-Werkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/ReportCommissioned reportTransferpeer-review

  53. Published

    Thermische Untersuchungen an PA-Werkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/ReportCommissioned reportTransferpeer-review

  54. Published

    Thermoanalytical investigation of a sieve residue - project: Jiwi Kamai

    Wallner, G. & Lang, R., 2009

    Research output: Book/ReportCommissioned reportTransferpeer-review

  55. Published

    Thermo mechanical characterization of PE and PP materials

    Pilz, G., Pinter, G. & Lang, R., 2009

    Research output: Book/ReportCommissioned reportTransferpeer-review

Previous 1 2 3 4 5 6 7 8 Next