Reinhold Lang

(Former)

1 - 100 out of 365Page size: 100

Research output

  1. 2017
  2. Published

    Fracture mechanics methods to assess the lifetime of thermoplastic pipes

    Arbeiter, F., Pinter, G., Lang, R. W. & Frank, A., 2017, Springer Series in Materials Science. Springer Berlin, Vol. 247. p. 33-54 22 p. (Springer Series in Materials Science; vol. 247).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  3. 2012
  4. Published

    Thermotropic Layers for Overheating Protection of all-Polymeric Flat Plate Solar Collectors

    Resch, K., Hausner, R., Wallner, G. M. & Lang, R., 2012, Polymeric Materials for Solar Thermal Applications. p. 255-265

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  5. 2011
  6. Published

    On the determination of the relaxation modulus of PP compounds from arbitrary strain histories

    Tscharnuter, D., Jerabek, M., Major, Z. & Lang, R., 2011, In: Mechanics of time-dependent materials. 15, 1, p. 01-14

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Time-dependent poisson’s ratio of polypropylene compounds for various strain histories

    Tscharnuter, D., Jerabek, M., Major, Z. & Lang, R., 2011, In: Mechanics of time-dependent materials. 15, 1, p. 15-28

    Research output: Contribution to journal › Article › Research › peer-review

  8. 2010
  9. Published

    Aging behavior and lifetime modeling for polycarbonate

    Kahlen, S., Wallner, G. & Lang, R., 2010, In: Solar energy. p. 755-762

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Aging behavior of polymeric absorber materials for solar thermal collectors

    Kahlen, S., Wallner, G. & Lang, R., 2010, Proceedings of P2010, 14th International Scientific Conference on Polymeric Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Aging behavior of polymeric solar absorber materials: Aging on the component level

    Kahlen, S., Wallner, G., Lang, R., Meir, M. & Rekstad, J., 2010, In: Solar energy. p. 459-465

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Characterization of physical and chemical aging of polymeric solar materials by mechanical testing

    Kahlen, S., Jerabek, M., Wallner, G. & Lang, R., 2010, In: Polymer Testing. p. 72-81

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Characterization of the fracture behavior of NBR and FKM grade elastomers for oilfield applications

    Major, Z. & Lang, R., 2010, In: Engineering Failure Analysis. p. 701-711

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Development and Characterization of polymeric thermotropic materials for overheating protectiion of solar collectors

    Resch, K., Wallner, G. & Lang, R., 2010, Society of Plastics Engineers. p. 1127-1130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Filler/matrix-debonding and micro-mechanisms of deformation in particulate filled polypropylene composites under tension

    Jerabek, M., Major, Z., Renner, K., Moczo, J., Pukanszky, B. & Lang, R., 2010, In: Polymer. p. 2040-2048

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Strain determination of polymeric materials using digital image correlation

    Jerabek, M., Major, Z. & Lang, R., 2010, In: Polymer Testing. p. 407-416

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Uniaxial compression testing of polymeric materials

    Jerabek, M., Major, Z. & Lang, R., 2010, In: Polymer Testing. p. 302-309

    Research output: Contribution to journal › Article › Research › peer-review

  18. 2009
  19. Published

    A fracture mechanics concept for the accelerated characterization of creep crack growth in PE-HD pipe grades

    Frank, A., Freimann, W., Pinter, G. & Lang, R., 2009, In: Engineering Fracture Mechanics. 76, p. 2780-2787

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Ageing characterization of commercial ethylene copolymer greenhouse films by analytical and mechanical methods

    Oreski, G., Wallner, G. & Lang, R., 2009, In: Biosystems engineering. 103, p. 489-496

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Aging of polymers in solar-thermal applications, Final Report

    Wallner, G., Kahlen, S. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Aging of polymers in solar-thermal applications, WP Report Alterung, Analyse und Charakterisierung von Bauteilen

    Wallner, G., Kahlen, S. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Aging of polymers in solar-thermal applications, WP Report Alterung, Analyse und Charakterisierung von Halbzeugen

    Wallner, G., Kahlen, S. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Aging of polymers in solar-thermal applications, WP Report Herstellung von Compounds, Halbzeugen und Bauteilen

    Wallner, G., Kahlen, S. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Characterization and simulation of the micromechanical behaviour of particulate filled polypropylene compounds under creep loading

    Gastl, S., Jerabek, M., Major, Z. & Lang, R., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    Close-Fit Relining - Verfahrensbedingte Beeinflussung der Werkstoffeigenschaften und des Rohrlangzeitverhaltens

    Frank, A., Haager, M., Hofmann, A., Pinter, G. & Lang, R., 2009, ÖGL Symposium Grabenlos. p. 54-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Crack growth in polyethylene (PE-HD) - from macroscopic failure to molecular failure mechanisms

    Lang, R., Pinter, G., Frank, A. & Haager, M., 2009, EPF'09 European polymer congress. p. 121-121

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Development and characterization of novel two-layer high performance coil coatings for the buildings industry, Final Report

    Wallner, G., Buder-Stroisznigg, M., Fischer, J. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Development and characterization of novel two-layer high performance coil coatings for the buildings industry, WP Report Analyse von Lackkomponenten, Lackfilmen und bandbeschichteten Blechen

    Wallner, G., Fischer, J., Buder-Stroisznigg, M. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    Development and characterization of novel two-layer high performance coil coatings for the buildings industry, WP Report Charakterisierung von Lackfilmen und bandbeschichteten Blechen

    Wallner, G., Buder-Stroisznigg, M., Fischer, J. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    Development and characterization of novel two-layer high performance coil coatings for the buildings industry, WP Report Herstellung von Lacken

    Wallner, G., Buder-Stroisznigg, M., Fischer, J. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    Development and characterization of novel two-layer high performance coil coatings for the buildings industry, WP Report Herstellung von Lackfilmen und beschichteten Blechen

    Wallner, G., Buder-Stroisznigg, M., Fischer, J. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    Diverse Messungen an Polypropylen-Talk Compounds

    Pinter, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Dynamisch-Mechanische Analyse (DMA) an PMMA-Folien

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    Dynamisch-Mechanische Analyse (DMA) von Folienwerkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  36. Published

    Dynamisch-Mechanische Analyse (DMA) von Thermoplastwerkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  37. Published

    Effect of molecular and morphological parameters of PE-UHMW compounds on the performance of ski running surfaces, Final Report

    Wallner, G., Fischer, J. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  38. Published

    Effect of molecular and morphological parameters of PE-UHMW compounds on the performance of ski running surfaces, WP Report: Analyse und Charakterisierung von Bauteilen

    Fischer, J., Wallner, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  39. Published

    Effect of molecular and morphological parameters of PE-UHMW compounds on the performance of ski running surfaces, WP Report: Analyse und Charakterisierung von Rohstoffen und Halbzeugen

    Fischer, J., Wallner, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  40. Published

    Effect of molecular and morphological parameters of PE-UHMW compounds on the performance of ski running surfaces, WP Report: Herstellung von Rohstoffen, Halbzeugen und Bauteilen

    Fischer, J., Wallner, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Effects of temperature and moisture on the tensile/tensile fatigue behavior of an injection molded sgf-reinforced partial aromatic polyamide

    Guster, C., Pinter, G., Eichlseder, W. & Lang, R., 2009, 12th International Conference on Fracture, ICF 13. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Filler/matrix-debonding and micro-mechanisms of deformation in particulate filled pp composites under tension

    Jerabek, M., Major, Z. & Lang, R., 2009, Euro Fillers 2009. p. 18-22

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Flexible clear coats - Effect of curing conditions

    Buder-Stroisznigg, M., Wallner, G., Strauß, B., Jandel, L. & Lang, R., 2009, In: Progress in organic coatings. 65, p. 44-48

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Lifetime prediction of polyethylene pipes based on an accelerated extrapolation concept for creep crack growth with fatigue tests on cracked round bar specimens

    Frank, A., Pinter, G. & Lang, R., 2009, ANTEC 2009 Society of Plastics Engineers' Annual Technical Conference. p. 2169-2174

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Lifetime Prediction of the Fatigue crack growth (FCG) of high density polyethylene (HDPE) by crack layer theory

    Choi, B.-H., Balika, W., Chudnovsky, A., Pinter, G. & Lang, R., 2009, In: Polymer engineering and science. 49, p. 1421-1428

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Mechanische Charakterisierung von CFK-Werkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Prediction of the remaining lifetime of polyethylene pipes after up to 30 years in use

    Frank, A., Pinter, G. & Lang, R., 2009, In: Polymer Testing. 49, p. 737-745

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Special topics of polymer science and advanced characterization methods, Final Report

    Wallner, G., Fischer, J., Oreski, G., Resch, K. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Special topics of polymer science and advanced characterization methods, WP Report Fortschrittliche IR Spektroskopie

    Oreski, G., Wallner, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Special topics of polymer science and advanced characterization methods, WP Report Fortschrittliche Rasterkraftmikroskopie

    Resch, K., Wallner, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Special topics of polymer science and advanced characterization methods, WP Report Ramanspektroskopie und Ramanmikroskopie

    Wallner, G., Lang, R. & Fischer, J., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. Published

    Thermische Untersuchungen an glasfaserverstärkten PA-Werkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  53. Published

    Thermische Untersuchungen an PA-Werkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  54. Published

    Thermoanalytical investigation of a sieve residue - project: Jiwi Kamai

    Wallner, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  55. Published

    Thermo mechanical characterization of PE and PP materials

    Pilz, G., Pinter, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  56. Published

    Utilizing unbleached cellulosic fibres in polypropylene matrix composites for injection moulding applications

    Burgstaller, C., Rüf, W., Stadlbauer, W., Pilz, G. & Lang, R., 2009, In: Journal of biobased materials and bioenergy. p. 226-231

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Zug- und Biegeprüfung eines Polymerbeton-Verbundwerkstoffes

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  58. 2008
  59. Published

    2. Leobener Symposium "SOLARTECHNIK - Neue Möglichkeiten für die Kunststoffbranche

    Lang, R. (Editor) & Wallner, G. (Editor), 2008, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  60. Published

    Accelerated investigation of creep crack growth in polyethylene pipe grade materials by the use of fatigue tests on cracked round bar specimens

    Frank, A., Pinter, G. & Lang, R., 2008, ANTEC 2008 Society of Plastics Engineers' Annual Technical Conference. p. 2435-2439

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Analysis of coloring of PP containers

    Pinter, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  62. Published

    A novel methodology for the evaluation of distinctness of image of glossy surfaces

    Gruber, D., Buder-Stroisznigg, M., Wallner, G., Strauß, B., Jandel, L. & Lang, R., 2008, In: Progress in organic coatings. 63, p. 377-381

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    A novel qualification procedure for lifetime and safety assessment of PE pressure pipes for arbitrary installation conditions

    Frank, A., Pinter, G. & Lang, R., 2008, Plastics Pipes XIV (CD). p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Characterisation of the fracture behavior of NBR and FKM grade elastomers for oilfield applications

    Major, Z. & Lang, R., 2008, Multilevel Approach to Fracture of Materials, Components and Structures. p. 228-228

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Characterization of the effects of preforming and redeforming on morphology and thermo-mechanical properties of polyethylene close-fit liners for trenchless pipe rehabilitation

    Frank, A., Mannsberger, G., Pinter, G. & Lang, R., 2008, ANTEC 2008 Society of Plastics Engineers' Annual Technical Conference. p. 2251-2255

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Characterization of the Fracture and Fatigue Behavior of Elastomer Composites

    Major, Z. & Lang, R., 2008, EUROMECH Colloquium 502. p. 71-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Characterization of the impact tensile behavior of glass fibre reinforced polyamide (PA-GF) Materials

    Major, Z. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  68. Published

    Characterization of the tensile behavior of glass fiber reinforced polyamide materials (PA-LGF) at high loading rates

    Major, Z. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  69. Published

    Cross-linking behavior of UV-curable acrylate resins

    Wallner, G., Resch, K. & Lang, R., 2008, In: Zeitschrift Kunststofftechnik : Journal of plastics technology. p. 2-14

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Deformation Analysis Of Impact Loaded Composites

    Fuchs, P., Major, Z. & Lang, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  71. Published

    Determination of bearing strength of composites by bold bearing configuration

    Pinter, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  72. Published

    Determination of interlaminar fracture toughness energy values according to pr DIN EN 6033

    Pinter, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  73. Published

    Dynamisch-mechanische Untersuchungen (DMA) an Thermoplastwerkstoffen

    Pilz, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  74. Published

    Dynamisch-mechanische Untersuchungen (DMA) an Thermoplastwerkstoffen - Teil 2

    Pilz, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  75. Published

    Fiber orientation and fatigue behavior of a short glass-fiber reinforced partial aromatic polyamide

    Guster, C., Pinter, G., Balika, W., Eichlseder, W. & Lang, R., 2008, 2. Fatigue Symposium Leoben. p. 444-455

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Fiber orientation and fatigue behaviour of a short glass-fiber reinforced partial aromatic polyamide

    Guster, C., Pinter, G., Balika, W., Eichlseder, W. & Lang, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  77. Published

    Flexible clear coats - Effect of curing conditions

    Buder-Stroisznigg, M., Wallner, G., Strauß, B., Jandel, L. & Lang, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  78. Published

    Fracture analysis of annealed PVDF films

    Wallner, G., Major, Z., Maier, G. & Lang, R., 2008, In: Polymer Testing. 27, p. 392-402

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Mechanical Characterization of Modified Liner Resins HPM052

    Pilz, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  80. Published

    Mechanical Characterization of VE- and UP-Laminates

    Pilz, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  81. Published

    Modeling of an all polymeric flat-plate collector with thermotropic overheating protection

    Resch, K., Hausner, R. & Lang, R., 2008, 1st Intern. Congress on Heating, Cooling and Buildings. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Ranking of PE pipe materials

    Pinter, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  83. Published

    Scanning Electron Microscopy (REM) for UP-Resins with Various Filler Types

    Pilz, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  84. Published

    Spectroscopic Investigations of Phase-Separated Thermotropic Layers Based on UV Cured Acrylate Resins

    Resch, K., Wallner, G. & Lang, R., 2008, In: Macromolecular Symposia. 265, p. 49-60

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Tensile Tests for UP-Resin Distitron 412 V2 with Various Filler Types (dry and wet) - Part II

    Pilz, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  86. Published

    The effect of cure condition on the apparent interlaminar shear strength, the glass transition temperature and the interlaminar fracture toughness for a carbon fiber epoxy laminate

    Pinter, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  87. Published

    Thermoanalytical investigation of thermoset samples

    Wallner, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  88. Published

    Zugversuch an einem Composite-Bauteil (IOR flange test)

    Pinter, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  89. 2007
  90. Published

    3D-Oberflächenvermessung von strukturierten Aluminiumfolien

    Berger, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  91. Published

    A340-500/-600 RTM CHF Subcomponent Tests

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  92. Published

    Analyse des Alterungszustandes von PP-Rohren

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  93. Published

    Analyse eines Profils

    Wallner, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  94. Published

    Analyse eines Spritzgussbauteiles

    Wallner, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  95. Published

    Analyse von Tiefziehmaterialien

    Wallner, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  96. Published

    Application of full-field strain and temperature measurement and analysis to polymer testing

    Major, Z., Steinberger, R., Feichter, C., Jerabek, M. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 473-474

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    A test concept for lifetime prediction of polyethylene pressure pipes

    Pinter, G., Lang, R. & Haager, M., 2007, In: Monatshefte für Chemie = Chemical monthly. 138, p. 347-355

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Bestimmung der Druckfestigkeit von CFK-Laminatwerkstoffen

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  99. Published

    Bestimmung der Kriech- und Zugeigenschaften für einen PTFE-Dichtungswerkstoff

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  100. Published

    Bestimmung der Längenausdehnung von Eisstockzwischenplatten aus PA6 GF40

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  101. Published

    Bestimmung der mechanischen Eigenschaften eines faserverstärkten thermoplastischen Hochleistungswerkstoffes

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  102. Published

    Bestimmung von ausgewählten mechanischen Eigenschaften eines faserverstärkten thermoplastischen Hochleistungswerkstoffes

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  103. Published

    Bestimmung von GIC-Werten in Anlehnung an pr DIN EN 6033

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  104. Published

    Bestimmung von GIC-Werten nach DIN EN 6033 - Part A

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  105. Published

    Bestimmung von ILSS-Werten nach DIN EN ISO 14130

    Wolfahrt, M., Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  106. Published

    Characterisation of the fatigue behavior of short glass fiber reinforced polymers

    Guster, C., Pinter, G., Major, Z., Eichlseder, W. & Lang, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  107. Published

    Characterisation of the fatigue behavior of short glass fiber reinforced polymers

    Guster, C., Pinter, G., Major, Z., Eichlseder, W. & Lang, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1 2 3 4 Next
View graph of relations

Latest Research Output

View more (365)