Ralf Schledjewski

(Former)

201 - 250 out of 250Page size: 50

Research output

  1. 2013
  2. Published

    Accurate 2d permeability measurement: Optical permeability characterization

    Grössing, H., Fauster, E. & Schledjewski, R., 2013, Novel Aspects in Composite Technologies: from Fibre to lightweight Structures. p. 34-40

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    An adaptive modular monitoring & control system for composites manufacturing processes

    Konstantopoulos, S., Fauster, E. & Schledjewski, R., 2013, Processing of fibre composites - challenges for maximum materials performance. p. 261-271

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Cost-based process selection for CFRP aerospace parts

    Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2013, In: JEC Composites Magazine. 81, May-June, p. 60-62

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Cost-based process selection for CFRP aerospace parts

    Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  6. Published

    Cost-saving potentials for CFRP parts in early design stages

    Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2013, Composite Materials: The great advance. p. 8439-8446

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Cost-saving potentials for CFRP parts in early design stages

    Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  8. Published

    CULT – Hybrider Leichtbau mit ganzheitlichem Ansatz am Beispiel “CULT” (Cars’ Ultra Light Technologies)

    Schledjewski, R., 2013, In: Carbon-Composites-Magazin : die Mitgliederzeitschrift des CCeV. 2013, 2, p. 85-85

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Cure analysis of pultrusion epoxy resin

    Kastanis, D., Feuchter, M., Moser, A., Wolfahrt, M., Pinter, G. & Schledjewski, R., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  10. Published

    Economic investigation of impact damage using non-destruction thermography analysis on structural automotive parts

    Maier, A., Schledjewski, R. & Oswald-Tranta, B., 2013, ICSAAM 2013. p. 1-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    High efficient composite processing

    Schledjewski, R., 2013, ICSAAM 2013. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    In-line cure monitoring of composite materials based on kinetic model analysis assisted by thermal sensing

    Konstantopoulos, S., Tonejc, M., Fauster, E. & Schledjewski, R., 2013, Proceedings of the 5th ICSAAM. p. -

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Mechanical Dispersion Methods for Carbon Nanotubes in Aerospace Composite Matrix Systems

    Grishchuk, S. & Schledjewski, R., 2013, Carbon Nanotube Enhanced Aerospace Composite Materials. p. 99-154

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  14. Published

    Moulds for continuous fiber reinforced polymer Composites

    Schledjewski, R., 2013, Mould-Making Handbook. p. 200-239

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  15. Published

    Multifunktionale Oberflächen und Grenzflächen in Verbundwerkstoffen: Online Erfassung von Kompaktierung, Imprägnierung und Aushärtegrad

    Kastanis, D. & Schledjewski, R., 2013, 22. Leobener Kunststoff-Kolloquium „Oberflächen und Grenzflächen in der Polymertechnologie“. p. 168-174

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Optical permeability measurement of NCF: Influence of material properties on the 2d preform permeability

    Grössing, H. & Schledjewski, R., 2013, Composite Materials: The great advance. p. 5802-5809

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Parametric study on processing parameters and resulting part quality through thermoplastic placement process

    Khan, M. A., Mitschang, P. & Schledjewski, R., 2013, In: Journal of composite materials. 47, p. 485-499

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Simulation of the tape-laying process for thermoplastic matrix composites

    Narnhofer, M., Schledjewski, R., Mitschang, P. & Perko, L., 2013, In: Advances in Polymer Technology. 32, p. E705-E713

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Statistical Uncertainty Analysis of Material and Measurement Parameters for Optical Permeability Determination

    Fauster, E., Grössing, H. & Schledjewski, R., 2013, Proceedings of CompositesWeek@Leuven. p. --8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Statistical Uncertainty Analysis of Material and Measurement Parameters for Optical Permeability Determination

    Fauster, E., Grössing, H. & Schledjewski, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  21. Published

    Thermal degradation analysis of short-time heated polymers

    Bayerl, T., Brzeski, M., Martínez-Tafalla, M., Schledjewski, R. & Mitschang, P., 2013, In: Journal of thermoplastic composite materials. p. 1-26

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Uncertainty analysis for optical permeability measurement of reinforcing textiles

    Fauster, E., Grössing, H. & Schledjewski, R., 2013, Composite Materials: The great advance. p. 4685-4694

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. 2012
  24. Published

    A Model-Based Processing Concept for Thermoplastic Tape Placement

    Fauster, E. & Schledjewski, R., 2012, SAMPE 2012 Technical Conference Proceedings: Connecting the Advanced Materials Community. p. --8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    A Modular Model-Based Processing Concept for an Optimized Pultrusion Process Management

    Fauster, E., Kastanis, D. & Schledjewski, R., 2012, Proceedings of ECCM 15. p. --8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    CFD Simulations of a hot gas torch for the thermoplastic tape placement process

    Narnhofer, M., Pazour, P. & Schledjewski, R., 2012, Proceedings of ECCM 15. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    COMPARISON OF PERMEABILITY MEASUREMENTS OF SEVERAL FIBRE TEXTILES USING DIFFERENT MEASUREMENT METHODS

    Grössing, H., Wolfahrt, M., Müller, A. & Schledjewski, R., 2012, Proceedings of ECCM 15. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Filament winding process in thermoplastics

    Schledjewski, R., 2012, Manufacturing techniques for polymer matrix composite (PMCs). p. 182-208

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  29. Published

    Induction heating of thermoplastic materials by particulate heating promoters

    Bayerl, T., Schledjewski, R. & Mitschang, P., 2012, In: Polymers & Polymer Composites (Polymers and polymer composites). 20, p. 333-342

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Montanuniversität Leoben: Kolloquium Polymerer Leichtbau

    Schledjewski, R., 2012, In: Österreichische Kunststoff-Zeitschrift. p. 50-51

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Montanuniversität Leoben: Leichtbau mit polymeren Verbundwerkstoffen in der Umsetzung

    Schledjewski, R., 2012, In: News / Carbon Composites e.V.. 11, p. 25-25

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    PROCESS SELECTION OPTIMIZATION OF CFRP PARTS IN THE AEROSPACE INDUSTRY

    Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2012, Proceedings of ECCM 15. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Simulation of materials behaviour during in-situ consolidation using continuous welding processes like thermoplastic tape placement

    Schledjewski, R., Khan, M. A. & Mitschang, P., 2012, Proceedings ECCOMAS2012. p. 4298-4307

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Simulation of the thermoplastic tape placement

    Maurer, D., Khan, M. A., Mitschang, P. & Schledjewski, R., 2012, Proceedings 4th European Conference on Materials and Structures in Aerospace – EUCOMAS 2012. p. 1-28

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Verarbeitung von Verbundwerkstoffen

    Schledjewski, R., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. Published

    Vielfältige Möglichkeiten und immer noch große Herausforderungen

    Schledjewski, R., 2012, In: KC-aktuell (Informationen aus dem Kunstoff-Cluster). p. 2-4

    Research output: Contribution to journal › Article › Research › peer-review

  37. 2011
  38. Published

    20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau

    Schledjewski, R. (Editor), 2011, Leoben: Eigenverlag. (Schriftenreihe Kunststofftechnik Leoben; vol. 1)

    Research output: Book/Report › Book › Research

  39. Published

    Controlled influence of component properties using hybrid techniques by combining different lightweight structures

    Holschuh, R., Mitschang, P. & Schledjewski, R., 2011, Proc. 18th International Conference on Composite Materials (ICCM). p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Cost comparison of different thermoplastic and thermoset filament winding processes

    Mack, J., Schledjewski, R. & Mitschang, P., 2011, SAMPE International Symposium Proceedings. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Duromere Faserverbundstrukturen in der Großserie

    Kastanis, D. & Schledjewski, R., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 199-203

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Duromere Faserverbundstrukturen in der Großserie

    Kastanis, D. & Schledjewski, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Future Fusion

    Schledjewski, R., 2011, In: Public service review: European science & technology : an independent reviewPublic Service Review. p. 36-36

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    MODELING THE IMPREGNATION PROCESS OF A SIPHON IMPREGNATION SYSTEM DURING FILAMENT WINDING

    Miaris, A., Päßler, M., Schledjewski, R. & Mitschang, P., 2011, Proc. of the ASME 2011 Pressure Vessels and Piping Conference PVP 2011. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Online consolidation process optimization by means of process simulation

    Narnhofer, M., Schledjewski, R. & Mitschang, P., 2011, THEPLAC 2011. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Processing and properties of glass/polypropylene in long fibre compounding extrusion

    Schledjewski, R. & Priebe, M., 2011, In: Plastics, rubber and composites. 40, p. 374-379

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Properties of compression moulded new fully biobased thermoset composites with aligned flax fibre textiles

    Schledjewski, R., Pohl, T., Bierer, M., Natter, E., Madsen, B. & Hoydonckx, H., 2011, In: Plastics, rubber and composites. 40, p. 294-299

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Research into the processing of composites

    Schledjewski, R., 2011, In: Public service review: European science & technology : an independent reviewPublic Service Review. 2011, 11, p. 33-33

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    RING WINDING TECHNOLOGY – INCREASED PROCESS EFFICIENCY AND EFFECTS ON THE MECHANICAL PROPERTIES OF RING SPECIMENS

    Päßler, M., Miaris, A., Schledjewski, R. & Mitschang, P., 2011, Proc. of the ASME 2011 Pressure Vessels and Piping Conference PVP 2011. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Simulation des kontinuierlichen Schweißprozesses

    Narnhofer, M., Schledjewski, R. & Mitschang, P., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 19-28

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Status und Potentiale der Automation in der Verarbeitung von Faser-Kunststoff-Verbunden

    Fauster, E., Kastanis, D. & Schledjewski, R., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 59-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Thermoplastische Faserverbundwerkstoffe im Automobilbau – Einsatzmöglichkeiten am Beispiel von CULT

    Wolfahrt, M., Kastanis, D., Tscharnuter, D., Schledjewski, R. & Pinter, G., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 193-197

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Zweidimensionale Permeabilitätsmessung von flächigen Faserhalbzeugen unter Verwendung von optischen und kapazitiven Messverfahren

    Größing, H., Wolfahrt, M. & Schledjewski, R., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 205-211

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 Next
View graph of relations

Latest Research Output

View more (250)