Nicolai Aust

1 - 81 out of 81Page size: 100

Research output

  1. 2019
  2. Published

    Investigation of the Applicability of Neogene Sediments as Fillers for Polymeric Materials

    Wegerer, E. & Aust, N., 11 Sept 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  3. 2018
  4. Published

    Mineralogical properties of continental related pelites in the Eastern Alps

    Wegerer, E., Wessely, G. & Aust, N., 24 Sept 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  5. Published

    Stratigraphic distribution and lithofacial variations of Carboniferous shales

    Wegerer, E., Aust, N. & Rachetti, A., 17 Sept 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  6. Published

    Reconstructing Lithofacial Variations and Depositional Processes in Carboniferous Black Shales

    Wegerer, E. & Aust, N., 16 Aug 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. 2017
  8. Published

    Clay minerals as geochemical- and facies indicators of an intercratonic rift basin

    Wegerer, E. & Aust, N., 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  9. Published

    The mineralogical composition of organic rich pelitic sediments associated with the syn- and post-rift phase of an intracratonic basin

    Wegerer, E. & Aust, N., 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. 2016
  11. Published

    Distribution and variation of the inorganic fraction of Devonian to Bashkirian black shales in the north-western part of the Dniepr-Donets Basin, Ukraine

    Wegerer, E., Sachsenhofer, R., Misch, D. & Aust, N., 22 Apr 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    Inorganic geochemical components of Paleozoic source rocks associated with basin stratigraphy and depositional processes

    Wegerer, E., Aust, N. & Rachetti, A., 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    Lithofacial characteristics of Devonian to Bashkirian black shales and the sedimentary environment of the Dniepr-Donets Basin, Ukraine

    Wegerer, E. & Aust, N., 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    Thermosets from Renewable Resources - Fundamentals, Preparation, and Properties

    Mahendran, A. R. & Aust, N., 2016, Advances in Polymer Materials and Technology. Srinivasan, A. & Bandyopadhyay, S. (eds.). p. 553-571

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  15. 2014
  16. Published

    Synthesis, characterization, and properties of isocyanate-free urethane coatings from renewable resources

    Aust, N., 2014, In: Journal of Coatings Technology and Research. 11, p. 329-339

    Research output: Contribution to journal › Article › Research › peer-review

  17. 2013
  18. Published

    Isocyanate Free Urethane Coatings from Renewable Resources

    Mahendran, A. R., Wuzella, G., Aust, N., Kandelbauer, A. & Müller, U., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    Polypropylene/Polyethylene Blends as Models for High-Impact Propylene-Ethylene Copolymers, Part 2: Relation Between Composition and Mechanical Performance

    Kock, C., Aust, N., Grein, C. & Gahleitner, M., 2013, In: Journal of Applied Polymer Science. 130, p. 287-296

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Processing and Characterization of Natural Fibre Reinforced Composites using Lignin Phenolic Binder

    Mahendran, A. R., Wuzella, G., Aust, N., Müller, U. & Kandelbauer, A., 2013, In: Polymers & Polymer Composites (Polymers and polymer composites). 21, p. 199-206

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Thermal decomposition kinetics of natural fiber reinforced green composites

    Mahendran, A. R., Wuzella, G., Aust, N., Müller, U. & Vijayakumar, C. T., 2013, In: ScienceJet. 2, 34, p. 1-6 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Thermal Degradation Studies On Non-woven Flex and Hemp Fiber Mat Reinforced Green-Composites

    Mahendran, A. R., Aust, N., Wuzella, G. & Müller, U., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    Vergleichende GPC-Messungen an 2 Polyetherimiden

    Aust, N., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. 2012
  25. Published

    Bio-Based Non-Isocynate Urethane Derived from Plant Oil

    Mahendran, A. R., Aust, N., Wuzella, G., Müller, U. & Kandelbauer, A., 2012, In: Journal of polymers and the environment. 20, p. 926-931

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Characterization of Non-Isocyanate Urethane Coatings derived from Plant Oil

    Mahendran, A. R., Wuzella, G., Aust, N., Müller, U. & Kandelbauer, A., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    From Molecular Structure to Performance of Polymeric Materials: Selected contributions from: 10th Austrian Polymer Meeting and 2nd Joint Austrian-Slovenian Polymer Meeting 2010, Leoben, Austria, September 8 - 10, 2010

    Aust, N. (Editor), Fink, J. (Editor) & Kern, W. (Editor), 2012, Weinheim/Germany: Wiley-VCH . 125 p. (Macromolecular Symposia; vol. 311)

    Research output: Book/Report › Book › Research

  28. Published

    From Molecular Structure to Performance of Polymeric Materials

    Aust, N., Fink, J. & Kern, W., 2012, Wiley-VCH . 125 p.

    Research output: Book/Report › Anthology › Research

  29. Published

    Molmassenverteilung von Granulatmuster "Lexan LS 2"

    Aust, N., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    Photocrosslinkable modified vegetable oil based resin for wood surface coating application

    Mahendran, A. R., Wuzella, G., Aust, N., Kandelbauer, A. & Müller, U., 2012, In: Progress in organic coatings. 74, p. 697-704

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Synthesis and Characterization of a Bio-Based Resin from Linseed Oil

    Mahendran, A. R., Aust, N., Wuzella, G. & Kandelbauer, A., 2012, In: Macromolecular Symposia. 311, p. 18-27

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Thermal cure kinetics of epoxidized linseed oil with anhydride hardener

    Mahendran, A. R., Wuzella, G., Kandelbauer, A. & Aust, N., 2012, In: Journal of thermal analysis and calorimetry. 107, p. 989-998

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Thermal Decomposition Kinetics of Natural Fiber Reinforced Composite Using Model Free Kinetic Method

    Mahendran, A. R., Wuzella, G., Aust, N. & Müller, U., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  34. Published

    Untersuchung der Molmassenverteilung einer PMMA-Deckschicht

    Aust, N., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. 2011
  36. Published

    Bio-based Non-Isocyanate Polyurethane Coatings Derived from Plant Oils

    Mahendran, A. R., Aust, N., Wuzella, G., Müller, U. & Kandelbauer, A., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Charakterisierung von PVC-Tunnelbahnen

    Aust, N., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  38. Published

    Molmassenvverteilung von PMMA-Deckschichten

    Aust, N., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  39. Published

    Untersuchungen an 13 Polyethylen-Proben

    Aust, N., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  40. Published

    Untersuchung von PP-Folien

    Aust, N., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. 2010
  42. Published

    Determination of the molar mass distribution of PP-check cards

    Aust, N., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Determination of the molar mass distribution of PS-check cards

    Aust, N., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Mathematical Modeling and Optimization of Run Parameters of Crystallization Analysis Fractionation (CRYSTAF)

    Fischlschweiger, M., Aust, N., Oberaigner, E. & Kock, C., 2010, In: Macromolecular chemistry and physics. 211, p. 383-392

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Molar mass distribution of several injection molded parts of PS and PP

    Aust, N., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    NMR-Untersuchungen an Walzenbelägen

    Aust, N., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Physical model for the expansion injection molding process and degradation effects on the injection molded parts

    Friesenbichler, W., Rajganesh Jegadeesan, X., Steinbichler, G. & Aust, N., 2010, 4th International PMI Conference - Conference Proceedings. p. 220-226

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Qualitative Untersuchungen an 7 Polyethylen-Proben

    Aust, N., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Survey of chemical residues and biological evaluation of photochemically pre-vulcanized surgical gloves

    Aust, N., Temel, A., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 2010, In: Monatshefte für Chemie = Chemical monthly. 141, p. 1365-1372

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Untersuchung der Molmassenverteilung von 8 Silikon-Elastomeren

    Aust, N., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. 2009
  52. Published

    Correlation between production parameters and application properties of high impact copolymers

    Aust, N. & Kock, C., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  53. Published

    Quality modeling and optimization of run parameters of Crystallization Analysis Fractionation (CRYSTAF)

    Fischlschweiger, M., Aust, N., Oberaigner, E. & Kock, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  54. Published

    Quality modeling and optimization of run parameters of Crystallization Analysis Fractionation (CRYSTAF)

    Fischlschweiger, M., Aust, N., Oberaigner, E. & Kock, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  55. Published

    Refined methods for fractionation and characterization of polymers, especially semi-crystalline polyolefins

    Aust, N. & Fischlschweiger, M., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  56. Published

    Untersuchung der Molmassenverteilung von 4 Polyethersulfon-Proben

    Aust, N., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  57. 2008
  58. Published

    Determination of the Molar Mass Distribution from Rheological Measurements and Size Exclusion Chromatography: A Comparative Study

    Gahleitner, M., Kock, C., Schausberger, A., Aust, N. & Reichelt, K., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  59. Published

    Polypropylene - Polyethylene Melts: Phase Structure Determination by Rheology

    Kock, C., Schausberger, A., Aust, N., Gahleitner, M. & Ingolic, E., 2008, The XVth International Congress on Rheology. p. 520-522

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Preparation and Characterization of Partially Degraded High-Density Polyethylene in an Internal Mixer

    Mahendran, A. R., Aust, N., Vijayakumar, C. T. & Lederer, K., 2008, In: Polymer plastics technology and engineering (Polymer-plastics technology and engineering). 47, p. 1142-1146

    Research output: Contribution to journal › Article › Research › peer-review

  61. 2007
  62. Published

    Determination of the molar mass distribution from rheological measurements and size exclusion chromatography: A comparative study

    Kock, C., Schausberger, A., Aust, N. & Gahleitner, M., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  63. Published

    Morphology Consequences on Fracture Mechanics of PP-PE-Blends

    Kock, C., Gahleitner, M., Reichelt, K., Aust, N. & Ingolic, E., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  64. Published

    Optimization of run parameters of temperature rising elution fractionation with the aid of a factorial design experiment

    Aust, N., Gahleitner, M., Reichelt, K. & Raninger, B., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  65. Published

    Optimization of size-exclusion chromatography for the characterization of polymers of ultra-high molar mass

    Aust, N., Parth, M., Yakhoul, A. J., O'Donohue, S. & Zash, N., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  66. 2006
  67. Published

    A Column By-Pass System and Its Application in High-Temperature Size-Exclusion Chromatography

    Aust, N., O'Donohue, S., Yakhoul, A. J. & Zash, N., 2006, In: Macromolecular materials and engineering. 291, p. 387-387

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Optimization of run parameters of Temperature Rising Elution Fractionation by the aid of a factorial design experiment

    Aust, N., Gahleitner, M., Reichelt, K. & Raninger, B., 2006, In: Polymer Testing. 25, p. 896-903

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Optimization of Run Parameters of Temperature Rising Elution Fractionation with the Aid of a Factorial Design Experiment

    Aust, N., Gahleitner, M., Reichelt, K. & Raninger, B., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  70. Published

    Structural characterization tools for the development of heterophasic EP-copolymers

    Aust, N. & Gahleitner, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  71. 2005
  72. Published

    Development and implementation of new methods of fractionation and characterization for semi-crystalline polymers, especially polypropylene

    Aust, N., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  73. Published

    Optimized molecular characterization of synthetic and natural polymers of ultra-high molar mass

    Lederer, K., Aust, N., Schneller, A. & Holzner, A., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  74. 2004
  75. Published

    Size-Exclusion Chromatography of Polymers of Ultra-high Molar Mass

    Aust, N., Parth, M. & Lederer, K., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  76. 2003
  77. Published

    Application of size-exclusion chromatography to polymers of ultra-high molar mass

    Aust, N., 2003, In: Journal of biochemical and biophysical methods. 56, p. 323-323

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Molecular Characterization of Ultra-high Molar Mass and Soluble Fractions of Partially Cross-linked Polyethylenes

    Parth, M., Aust, N. & Lederer, K., 2003, In: International journal of polymer analysis and characterization. 8, p. 175-175

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Optimierung der Methodik der Größenausschlußchromatographie zur Polymercharakterisierung

    Aust, N., 2003

    Research output: Thesis › Habilitation thesis › peer-review

  80. 2002
  81. Published

    Characterisation of the thermo-oxidative degradation of polyethylene pipes by chromatographical, rheological and thermo-analytical methods

    Pinter, G., Duretek, I., Aust, N. & Lang, R. W., 24 Jun 2002, In: Macromolecular Symposia. 181, p. 213-223 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Characterisation of the Thermo-Oxidative Degradation of Polyethylene Pipes by Chromatographical, Rheological and Thermoanalytical Methods

    Pinter, G., Duretek, I., Aust, N. & Lang, R., 2002, In: Macromolecular Symposia. 181, p. 213-213

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Chemical and Physical Aspects of Polymer Science and Engineering

    Lederer, K. (Editor) & Aust, N. (Editor), 2002, Weinheim: Wiley-VCH .

    Research output: Book/Report › Book › Research

  84. Published

    Distribution of Molar Mass and Branching Index of Natural Rubber from Hevea Brasiliensis Trees of Different Age by Size Exclusion Chromatography Coupled with Online Viscometry

    Parth, M., Aust, N. & Lederer, K., 2002, In: Macromolecular Symposia. 181, p. 447-447

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Studies on the Effect of Electron Beam Radiation on the Molecular Structure of Ultra-high Molecular Weight Polyethylene Under the Influence of alpha-tocopherol with Respect to Its Application in Medical Implants

    Parth, M., Aust, N. & Lederer, K., 2002, In: Journal of materials science / Materials in medicine. 13, p. 917-917

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    The Effect of Electron Beam Radiation on the Molecular Structure of Ultra-High Molar Mass Polyethylene Used for Medical Implants

    Aust, N., Parth, M. & Lederer, K., 2002, In: Macromolecular Symposia. 181, p. 427-427

    Research output: Contribution to journal › Article › Research › peer-review

  87. 2001
  88. Published

    SEC of Ultra-high Molar Mass Polymers - Optimization of the Experimental Conditions to Avoid Molecular Degradation in Case of Narrow Polystyrene Standards

    Aust, N., Parth, M. & Lederer, K., 2001, In: International journal of polymer analysis and characterization. 6, p. 245-245

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Size Exclusion Chromatography as a Method for Routine Check-Up and Quality Control of Industrial Thermoplastic Polyurethane Systems - Correlation between Molecular Weight and Mechanical and Thermal Properties

    Aust, N. & Gobec, G., 2001, In: Macromolecular materials and engineering. 286, p. 119-119

    Research output: Contribution to journal › Article › Research › peer-review

  90. 1997
  91. Published

    A new IR detector cell with optimized optical path length for high-temperature SEC of polyolefins

    Aust, N. & Lederer, K., 1997, In: International journal of polymer analysis and characterization. 3, p. 219-219

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Studies of lyotropic crystalline mesophases of some novel regioselective substituted cellulose derivatives. 1. Synthesis and characterization

    Aust, N., Derleth, C. & Zugenmaier, P., 1997, In: Macromolecular chemistry and physics. 198, p. 1363-1363

    Research output: Contribution to journal › Article › Research › peer-review

  93. 1996
  94. Published

    Molecular Characterization of Branched Thermoplastic Polyurethanes in Dilute Solutions of N-Methyl-2-pyrrolidinone

    Lederer, K., Macko, T., Imrich-Schwarz, G., Aust, N., Kolmanics, T. & Schwarz, T., 1996, In: Macromolecular materials and engineering. 241, p. 113-113

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Molecular Characterization of Polyolefins

    Lederer, K. & Aust, N., 1996, In: Journal of macromolecular science / A. 33, p. 927-927

    Research output: Contribution to journal › Article › Research › peer-review

  96. 1995
  97. Published

    Determination of the Distribution of Molar Mass and Comonomer Content of Medium Density Polyethylene. Comparison of Procedures with Alternative Sequence of Fractionation

    Aust, N., Beytollahi-Amtmann, I. & Lederer, K., 1995, In: International journal of polymer analysis and characterization. 1, p. 245-245

    Research output: Contribution to journal › Article › Research › peer-review

  98. 1993
  99. Published

    Formation of supermolecular structures of polysaccharide-surfactant complexes in aqueous solutions - Influence of the polymer backbone

    Aust, N. & Zugenmaier, P., 1993, In: Macromolecular chemistry and physics. 194, p. 1583-1583

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Interactions in aqueous polypeptide derivative / surfactant systems

    Aust, N. & Zugenmaier, P., 1993, In: Polymer bulletin. 31, p. 213-219

    Research output: Contribution to journal › Article › Research › peer-review

  101. 1992
  102. Published

    Correlation between microscopic structural parameters and macroscopic flow behaviour of some polymer-surfactant systems suitable for tertiary oil recovery

    Aust, N., Meyer-Kolshorn, U., Schreiber, A. & Zugenmaier, P., 1992, In: Macromolecular materials and engineering. 195, p. 57-57

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Grundlagenforschung Chemisches Fluten - Korrelation zwischen strukturellen Parametern und Viskositätsergiebigkeit in tensidfreien und tensidhaltigen Polymerlösungen

    Zugenmaier, P. (Editor), Aust, N. (Editor), Meyer-Kolshorn, U. (Editor) & Schreiber, A. (Editor), 1992, Hamburg. (DGMK-Forschungsbericht; vol. 295-7)

    Research output: Book/Report › Book › Research

  104. 1990
  105. Published

    Rheological investigations on the interaction of cellulose derivatives with sodium dodecyl sulfate in aqueous solution

    Zugenmaier, P. & Aust, N., 1990, In: Macromolecular rapid communications. 11, p. 95-95

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations

Contact

Phone: 2309

Latest Research Output

View more (81)