Michael Stoschka

101 - 150 out of 208Page size: 50

Research output

  1. 2013
  2. Published

    Studie des transienten Verfestigungsverhaltens für ein- und mehrlagige Verbindungen

    Stoschka, M., Ottersböck, M. & Leitner, M., 2013, Proceedings of the Simulation Forum FWS 2013. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Study of kinematic strain hardening law in transient welding simulation

    Ottersböck, M., Stoschka, M. & Thaler, M., 2013, Mathematical Modelling of Weld Phenomena : [... papers presented at the 10th International Seminar "Numerical Analysis of Weldability", held from September 24 to 26, 2012 at Schloss Seggau near Graz, Austria ; ... the meeting was organized by the Institute for Materials Science and Welding (IWS) of Graz University of Technology ...] . Vol. 10. p. 255-266

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Study of Kinematic Strain Hardening Law in Transient Welding Simulation

    Ottersböck, M., Stoschka, M. & Thaler, M., 2013, Mathematical Modelling of Weld Phenomena 10. p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Study of the local notch stress HFMI master S/N-curve approach on high-strength steel joints

    Stoschka, M., Leitner, M. & Barsoum, Z., 2013, Proceedings of the 2nd Swedish Conference on Design and Fabrication of Welded Structures. p. 76-90

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    The influence of microstructure and operating temperature on the fatigue endurance of hot forged Inconel® 718 components

    Maderbacher, H., Oberwinkler, B., Gänser, H.-P., Tan, W., Rollett, M. & Stoschka, M., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. Volume 585, p. 123-131

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2012
  8. Published

    A closed concept to associate the hot-forging process controlled microstructure with fatigue life

    Stoschka, M., Stockinger, M., Maderbacher, H. & Riedler, M., 2 Oct 2012, Superalloys 2012 - Proceedings of the 12th International Symposium on Superalloys. p. 625-631 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Contribution to the fatigue enhancement of thin-walled, high-strength steel joints by high frequency mechanical impact treatment: IIW-Document XIII-2416-12

    Leitner, M., Stoschka, M. & Eichlseder, W., 2012

    Research output: Non-textual form › Web publication/site › Research

  10. Published

    EFFECT OF HIGH-STRENGTH FILLER METALS ON FATIGUE

    Stoschka, M., Leitner, M., Fössl, T. & Posch, G., 2012, In: Welding in the world. 56, 3-4, p. 20-29

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Fatigue assessment of welded high-strength steel joints using the local notch stress approach

    Simunek, D., Leitner, M. & Stoschka, M., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    Fatigue Life Investigations of Different Case Hardened Specimens under Rolling Contact Loading for Gears

    Trausmuth, A., Godor, I., Stoschka, M., Dietrich, A., Grün, F. & Eichlseder, W., 2012, 3rd Fatigue Sypmposium. p. 295-310

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Fatigue Life Investigations of Differently Hardened Specimens in Lubricated Tribological Rolling Contacts

    Trausmuth, A., Godor, I., Grün, F., Stoschka, M., Dietrich, A. & Eichlseder, W., 2012, Technische Akademie Esslingen. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Influence of High Frequency Peening on Fatigue of High-Strength Steels

    Leitner, M., Stoschka, M., Schanner, R. & Eichlseder, W., 2012, In: FME transactions.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Influence of steel grade on the fatigue strength enhancement by high frequency peening technology on longitudinal fillet weld gusset

    Leitner, M. & Stoschka, M., 2012, In: Journal of Engineering and Technology. 1, 3, p. 80-90 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Local fatigue behaviour of welded joints

    Leitner, M., Stoschka, M. & Barwart, S., 2012, Lightweight Design. p. 73-84

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Microstructural Assessment of IN718: A Closed-Loop Fatigue Approach

    Stoschka, M., Maderbacher, H. & Stockinger, M., 2012, Materials Science Forum. Vol. 706-709.2012. p. 2468-2473 (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  18. Published

    New developed filler metals for welding of high strength steels

    Schnitzer, R., Leitner, M., Fiedler, M. & Stoschka, M., 2012, Proceedings to the 2nd International Welding and Joining Technologies Congress and 19th Technical Welding Sessions. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Praktische Anwendungen eines höherfrequenten Hämmerverfahrens (PIT) in der Industrie

    Gerster, P., Leitner, M. & Stoschka, M., 2012, Tagungsband. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Quality testing of high-strength filler metals in regard to technical cracking – Part 1: IIW-II-C-438-11

    Stoschka, M., Leitner, M., Schnitzer, R. & Schörghuber, M., 2012

    Research output: Non-textual form › Web publication/site › Research

  21. Published

    Schwingfestigkeit hochfester Stähle an geschweißten Strukturen

    Leitner, M., Stoschka, M., Fössl, T. & Eichlseder, W., 2012, In: Schweiß- & Prüftechnik. p. 12-17

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Study of Kinematic Strain Hardening Law in Transient Welding Simulation

    Ottersböck, M., Stoschka, M. & Thaler, M., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    Topology optimization of a light-weight harvester head focussing on the delimbing knife unit

    Oppliger, F., Leitner, M. & Stoschka, M., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Welding procedure for high strength welds and their microstructural evolution during solidification and cooling: IIW Doc. II-C-436-11

    Vanovsek, W., Schnitzer, R., Schlagradl, T., Schneider, R., Posch, G., Schider, S., Bernhard, C., Leitner, H., Rauch, R., Fiedler, M. & Stoschka, M., 2012

    Research output: Non-textual form › Web publication/site › Research

  25. 2011
  26. Published

    Beitrag zur Lebensdaueruntersuchung von wälzbeanspruchten Härteschichten unterschiedlicher Stähle

    Trausmuth, A., Godor, I., Stoschka, M., Dietrich, A., Marsoner, S. & Eichlseder, W., 2011, Maschinenelemente Lager und Welle-Nabe-Verbindung. p. 335-351

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Contribution to the capability of filler metals to influence fatigue of butt joints: IIW_II-1775-11

    Stoschka, M., Leitner, M., Fössl, T. & Posch, G., 2011

    Research output: Non-textual form › Web publication/site › Transfer

  28. Published

    Contribution to the fatigue assessment of laser welded joints

    Stoschka, M., Thaler, M., Huemer, H. & Eichlseder, W., 2011, In: Procedia Engineering. 10, p. 1785-1790

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Evaluation of fillet weld properties and fatigue behaviour in dependence of welding parameters

    Leitner, M., Foessl, T., Stoschka, M. & Eichlseder, W., 2011, In: Archives of civil and mechanical engineering. 11, 3, p. 651-660

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Fatigue Behaviour of High-Strength Steels using an Optimized Welding Process and High Frequency Peening Technology

    Leitner, M., Stoschka, M., Schörghuber, M. & Eichlseder, W., 2011, Global Trends in Joining Cutting and Surfacing Technology. p. 729-736

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Lifetime Enhancement of Welded High-Strength Steel Joints by High Frequency Peening Technology

    Leitner, M., Stoschka, M., Schanner, R. & Eichlseder, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Lifetime Enhancement of Welded High-Strength Steel Joints by High Frequency Peening Technology

    Leitner, M., Stoschka, M., Schanner, R. & Eichlseder, W., 2011, 28th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 59-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Lifetime optimization of hot forged aerospace components by linking microstructural evaluation and fatigue behaviour

    Maderbacher, H., Gänser, H.-P., Riedler, M., Stoschka, M., Stockinger, M. & Eichlseder, W., 2011, Euro Superalloys 2010. Trans Tech Publications, p. 162-167 (Advanced materials research; vol. 278).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Load-carrying Capacity Prediction of Different Plasma Nitrided and Case hardened Specimens under Rolling Contact Loading

    Trausmuth, A., Lengauer, M., Godor, I., Stoschka, M., Dietrich, A. & Eichlseder, W., 2011, Quality in Heat Treatment. p. 143-153

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Load-carrying Capacity Prediction of Different Plasma Nitrided, Case hardened and Quenched Specimens under Rolling Contact Loading

    Trausmuth, A., Godor, I., Stoschka, M., Dietrich, A. & Eichlseder, W., 2011, Tribosystems Reliability and Lifetime Assessment. p. 441-447

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Material and component investigations on a Ti-6-4 fitting element

    Tan, W., Stoschka, M., Riedler, M., Eichlseder, W., Romagnoli, F. & Rondon, V., 2011, In: Mécanique & industries = Mechanics & industry. 12, 5, p. 361-378

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    MICROSTRUCTURAL ASSESSMENT OF IN718: A closed-loop fatigue approach

    Stoschka, M., Maderbacher, H., Stockinger, M. & Riedler, M., 2011, Abstracts Thermec 2011. p. 550-550

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    The influence of an improved adjustment of the material model on the fatigue lifetime results on Ti-6-4 air craft components

    Tan, W., Maderbacher, H., Stoschka, M., Riedler, M. & Eichlseder, W., 2011, 1st Interquadrennial ICF Conference in Middle East and Africa. p. 587-596

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    The influence of welding process parameters on residual stresses by means of coupled thermo-mechanical simulation

    Stoschka, M., Fössl, T., Leitner, H. & Eichlseder, W., 2011, In: International journal of microstructure and materials properties (IJMMP). 6, p. 105-121

    Research output: Contribution to journal › Article › Research › peer-review

  40. 2010
  41. Published

    A new lifetime calculation method based on variation of the microstructure due to different manufacturing conditions of Ti-6Al-4V

    Tan, W., Stoschka, M., Riedler, M. & Eichlseder, W., 2010, 18th European Conference on Fracture Fracture of Materials and Structures from Micro to Macro Scale. p. 0-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    An integrated approach to relate hot forging process controlled microstructure of IN718 aerospace components to fatigue life

    Stoschka, M., Riedler, M., Stockinger, M., Maderbacher, H. & Eichlseder, W., 2010, 7th International Symposium on SUPERALLOY718 and DERIVATIVES. p. 751-765

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Application of fatigue approaches on fillet welds of high strength steel

    Stoschka, M., Leitner, M., Fössl, T., Leitner, H. & Eichlseder, W., 2010, In: Materialwissenschaft und Werkstofftechnik. 41, p. 961-971

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Characterization of weld toe design by arc welding process parameters

    Fössl, T., Stoschka, M., Eichlseder, W. & Posch, G., 2010,

    63th IIW Annual Assembly & International Conference

    .     p. 126-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Contribution to the capability of filler metals to influence pulsating fatique life: II-C-402-10 II-1742

    Stoschka, M., Fössl, T., Leitner, M. & Posch, G., 2010

    Research output: Non-textual form › Web publication/site › Transfer

  46. Published

    Contribution to the Use of Local Fatigue Approaches Focussing on Finishes of Complete Welds

    Stoschka, M., Leitner, M., Fössl, T. & Schanner, R., 2010,

    63rd Annual Assembly & International Conference of the International Institute of Welding

    .     p. 245-252

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Fatigue investigations on a forged "W-Link" to improve the transferability of specimen results to real components

    Tan, W., Stoschka, M., Riedler, M. & Eichlseder, W., 2010, In: FATIGUE 2010. 2, 1, p. 2277-2285

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Investigations to improve the transferability of specimen results by real component

    Tan, W., Stoschka, M., Maderbacher, H., Riedler, M., Eichlseder, W. & Romagnoli, F., 2010, In: Materials engineering. 17, 3, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Investigations to improve the transferability of specimen results by the new component specimen "W-Link"

    Tan, W., Stoschka, M., Riedler, M. & Eichlseder, W., 2010, 27th Danubia-Adria Symbosium on Experimental Methods in Solid Mechanics. p. 0-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Life fatigue prediction of different plasma nitrided and case hardened specimens under rolling contact loading

    Trausmuth, A., Godor, I., Stoschka, M., Haberer, C., Eichlseder, W. & Dietrich, A., 2010, Nitrieren und Nitrocarburieren. p. 140-149

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Lifetime evaluation of hot forged aerospace components by linking microstructural evolution and fatigue behaviour

    Maderbacher, H., Christiner, T., Gänser, H.-P., Riedler, M., Stoschka, M. & Eichlseder, W., 2010, In: Procedia Engineering. 2, p. 2269-2276

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Rolling contact fatigue prediction of different plasma nitrided and case hardened specimens

    Eichlseder, W., Trausmuth, A., Godor, I. & Stoschka, M., 2010, Mechanical Engineering. p. 24-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Steigerung der Schwingfestigkeit geschweißter Strukturen durch die Pneumatic Impact Technology (PIT)

    Leitner, M., Fössl, T. & Stoschka, M., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  54. Published

    TRAGFÄHIGKEITSUNTERSUCHUNGEN VON UNTERSCHIEDLICH GEHÄRTETEN WERKSTOFFE UNTER KONTAKTBEANSPRUCHUNG

    Trausmuth, A., Godor, I., Stoschka, M., Eichlseder, W. & Dietrich, A., 2010, Wettbewerbsvorsprung durch tribologische Innovation. p. 57-71

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 Next
View graph of relations

Contact

Phone: 1455

Latest Research Output

View more (208)