Michael Feuchter

51 - 100 out of 158Page size: 50

Research output

  1. 2018
  2. Published

    Thermo-physical characteristics, mechanical performance and long-term stability of high temperature latent heat storages based on paraffin-polymer compounds

    Resch-Fauster, K. & Feuchter, M., 10 May 2018, In: Thermochimica Acta. 663.2018, 10 May, p. 34-45 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Impact response of sandwich panels with polyurethane and polystyrene core and composite facesheets

    Mocian, O. A., Constantinescu, D. M., Sandu, M., Sorohan, Ş., Roşu, D. & Feuchter, M., 1 Jan 2018, 35th Danubia Adria Symposium on Advances in Experimental Mechanics. p. 39-40 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Fabrication of nanocomposites with silica nanoparticles

    Constantinescu, D. M., Apostol, D. A., Picu, C. R., Krawczyk, K., Sieberer, M., Hadar, A. & Feuchter, M., 2018, In: Materials Today: Proceedings. p. 26727 26732 p., 5.

    Research output: Contribution to journal › Conference article › peer-review

  5. Published

    Fatigue fracture properties and morphology of Polyoxymethylene (POM) plates produced under moderate processing conditions

    Berer, M., Halb, M., Feuchter, M., Pacher, G. & Pinter, G. G., 2018.

    Research output: Contribution to conference › Poster › Research

  6. Published

    Impact response of sandwich panels with polyurethane and polystyrene core and composite facesheets

    Mocian, O. A., Constantinescu, D. M., Sandu, M., Sorohan, Ş., Roşu, D. & Feuchter, M., 2018, 35th Danubia Adria Symposium on Advances in Experimental Mechanics.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. 2017
  8. Published

    Mechanical recyclability of technical biopolymers: Potential and limits

    Resch-Fauster, K., Klein, A., Blees, E. & Feuchter, M., 1 Dec 2017, In: Polymer Testing. 64.2017, December, p. 287-295 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Deformation mechanisms in uniaxial-oriented semi-crystalline PET-films as a function of orientation to tensile direction

    Popovski, G., Feuchter, M. & Maier, G. A., 11 Oct 2017, In: Journal of polymer science : B, Polymer physics. 56.2018, 2, p. 159-169 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. 2016
  11. Published

    Mechanical Properties of Composites Used in High-Voltage Applications

    Moser, A. & Feuchter, M., 2016, In: Polymers / Molecular Diversity Preservation International.

    Research output: Contribution to journal › Article › Research › peer-review

  12. 2015
  13. Published

    Optimization of the Long Term Performance of Pipes by Multilayer Build Ups

    Arbeiter, F., Ševčík, M., Hutař, P., Feuchter, M., Bruckmoser, K. & Pinter, G., 23 Sept 2015, PPS 2015 - Book of Abstracts. p. 134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Optimization of the Long Term Performance of Pipes by Multilayer Build Ups

    Arbeiter, F., Sevcik, M., Hutař, P., Feuchter, M., Bruckmoser, K. & Pinter, G., 22 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  15. Published

    Investigation of interface properties of polypropylene multi-layer pipes via Raman-spectroscopy and X-ray scattering techniques

    Feuchter, M., Bruckmoser, K., Arbeiter, F. & Pinter, G., 21 May 2015.

    Research output: Contribution to conference › Poster › Research

  16. Published

    curing kinetics investigations on nanoparticle reinforced epoxy-anhydride systems

    Moser, A., Feuchter, M., Wanner, A. J., Kern, W. & Pinter, G., 2015, EPF 2015 - Book of abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Epoxy-anhydride based thermosets reinforced by surface modified inorganic nanoparticles: Effects on cure kinetics, thermal and thermo-mechanical properties

    Wanner, A. J., Moser, A., Brasch, M., Porubsky, T., Feuchter, M., Pinter, G. & Kern, W., 2015.

    Research output: Contribution to conference › Presentation › Research

  18. Published

    Epoxy anhydride based therosets reinforced by surface modified inorganic nanoparticles: effects on cure kinetics, thermal and thermo-mechanical properties

    Wanner, A. J., Moser, A., Brasch, M., Porubsky, T., Feuchter, M., Pinter, G. & Kern, W., 2015, PPS2015 - Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Influence of post processing change of the fracture mechanical properties of polyoxymethylene (POM)

    Berer, M., Feuchter, M. & Pinter, G., 2015, PPS2015 - Book of Abstract.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    (Nano)Composite mit hoher Wärmeleitfähigkeit

    Wanner, A. J., Moser, A., Feuchter, M. & Kern, W., 2015.

    Research output: Contribution to conference › Presentation › Research

  21. Published

    The influence of nanoscale particles on the mechanical, thermal and thermo-mechanical properties of anhydride based epoxy systems

    Feuchter, M., Moser, A., Wanner, A. J., Kern, W. & Pinter, G., 2015, EPF 2015 - Book of abstracts. p. 163 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. 2014
  23. Published

    Fracture Mechanical Analysis of Two Commercial Polyoxymethylene Homopolymer Resins

    Berer, M., Pinter, G. & Feuchter, M., 5 Oct 2014, In: Journal of Applied Polymer Science. 131, 19

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Alterungsbestimmungen an Kupplungsreiblamellen

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    BADGE/Aminhärter-Systeme für die Verklebung von Isolationskompositen

    Zhang, Z., Moser, A., Feuchter, M., Wieser, B., Mühlbacher, I., Pinter, G., Schwarz, R., Pukel, G. J. & Wiesbrock, F., 2014, Leobener Kunststoff-Kolloquium. p. 207-212

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Bestimmung temperaturabhängiger Eigenschaften

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    Bestimmung von Qualitätskriterien für Verpackungsfolien

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    Determination of aging for different TPE-components

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Determination of aging for three different components

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    Determination of mechanical properties

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    Elongational flow generating devices for the improvement of mechanical properties of PP-PNCs

    Friesenbichler, W., Battisti, M., Chitu, L. & Feuchter, M., 2014, 6th International PMI Conference Proceedings. p. 139-143

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    HDT measurements on different materials

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    Monotone Kompressionsversuche an Schäumen

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Silika-Nanopartikel in Glas-Glimmer Verbundwerkstoffen

    Wanner, A. J., Moser, A., Reichmann, A., Wewerka, K., Feuchter, M., Pinter, G. & Kern, W., 2014, Leobener Kunststoff-Kolloquium. p. 201-206

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Strategies to improve the mechanical properties of high-density polylactic acid foams

    Geissler, B., Feuchter, M., Laske, S., Fasching, M., Holzer, C. & Langecker, G., 2014, In: Journal of Cellular Plastics [Elektronische Ressource]. p. 1-21

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Tailor-made high density pla foam sheets – strategies to improve the mechanical properties

    Geissler, B., Feuchter, M., Laske, S., Walluch, M., Holzer, C. & Langecker, G., 2014,

    Blowing Agents & Foaming Processes 2014

    .     p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Tailor-made high density PLA foam sheets – strategies to improve the mechanical properties

    Geißler, B., Feuchter, M., Laske, S., Walluch, M., Holzer, C. & Langecker, G., 2014, In: Cellular polymers. 33, p. 233-242

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Tailor-Made High Density PLA Foam Sheets - Strategies to Improve the Mechanical Properties

    Geissler, B., Feuchter, M., Laske, S., Walluch, M., Holzer, C. & Langecker, G. R., 2014, In: Cellular polymers. 33, 5, p. 249-257

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    The Effect of Strain Rate on the Mechanical Properties of UD Glass-Fiber Reinforced Polymers

    Feuchter, M., Wolfahrt, M., Hirth, C. & Körber, H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  40. Published

    Unabhängige Lieferantenkontrolle

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. 2013
  42. Published

    Bestimmung der Druckfestigkeit von PEEK

    Feuchter, M. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Bestimmung der Kraft-Deformationsverläufe an unterschiedlichen Möbelverbundfolien

    Feuchter, M. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Bestimmung der Wasseraufnahme von PBT-Bauteilen

    Feuchter, M. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  45. Published

    Bestimmung von Qualitätskriterien für Verpackungsfolien

    Feuchter, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    Cure analysis of pultrusion epoxy resin

    Kastanis, D., Feuchter, M., Moser, A., Wolfahrt, M., Pinter, G. & Schledjewski, R., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Mechanische Kennwertermittlung von unterschiedlichen Thermoplasten

    Feuchter, M. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Mechanische und thermische Charakterisierung von einem glasfaserverstärkten Polymer

    Feuchter, M. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Temperaturabhängige Druckuntersuchungen an Kupplungspaketen

    Feuchter, M. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. 2012
  51. Published

    Bestimmung der Glasübergangstemperaturen an co-extrudierten Platten

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. Published

    Bestimmung der Kraft-Deformationsverläufe an unterschiedlichen Möbelverbundfolien

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  53. Published

    Bestimmung der Kraft-Deformtionsverläufe an unterschiedlichen Möbelverbundfolien

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  54. Published

    Bestimmung des linearen thermischen Ausdehnungskoeffizienten

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  55. Published

    Determining the ageing of polypropylene nanocomposites using rheological measurements

    Laske, S., Witschnigg, A., Mattausch, H., Kracalik, M., Pinter, G., Feuchter, M., Maier, G. & Holzer, C., 2012, In: Applied rheology. 22, 2, p. 24590-24614

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Mechanische Kennwertermittlung von unterschiedlichen Thermoplasten

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  57. Published

    Mechanische und thermische Charakterisierung von sieben verschiedenen glasfaserverstärkten Polymeren

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1 2 3 4 Next
View graph of relations

Contact

Phone: 2110

Latest Research Output

View more (158)