Menghuai Wu

351 - 400 out of 427Page size: 50

Research output

  1. 2007
  2. Published

    Eulerian multiphase modeling of solidification processes

    Wu, M., 2007

    Research output: Thesis › Habilitation thesis › peer-review

  3. Published

    Macrosegregation in Continuous Casting of Phosphor Bronze – Impact on Properties and Model-ing of Formation

    Gruber-Pretzler, M., Mayer, F., Wu, M., Ludwig, A., Riedle, J. & Hofmann, U., 2007, Macrosegregation in Continuous Casting of Phosphor Bronze – Impact on Properties and Model-ing of Formation. p. 265-279

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Modeling Equiaxed Dendritic Solidification with Melt Convection and Grain Sedimentation

    Wu, M. & Ludwig, A., 2007, Xi'an International Symposium on Solidification (ISS07). p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Numerical Study of the Impact of Gravity and Marangoni force on the Droplet Distribution of Hypermonotectic AlBi Alloys

    Gruber-Pretzler, M., Könözsy, L., Wu, M., Ludwig, A., Mathiesen, R. H., Schaffer, P. & Arnberg, L., 2007, Numerical Study of the Impact of Gravity and Marangoni force on the Droplet Distribution of Hypermonotectic AlBi Alloys. p. 249-253

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Numerical Study of the Shrinkage Flow Induced Macrosegregation in Continuous Casting of Steel

    Mayer, F., Gruber-Pretzler, M., Wu, M. & Ludwig, A., 2007, Numerical Study of the Shrinkage Flow Induced Macrosegregation in Continuous Casting of Steel. p. 265-270

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    On the Importance of the Electric Currents Flowing directly into the Mould during an ESR Process

    Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 2007, On the Importance of the Electric Currents Flowing directly into the Mould during an ESR Process. p. 105-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Parameter Study on the Formation of Macrosegregation in a Large Steel Ingot

    Könözsy, L., Mayer, F., Ishmurzin, A., Wu, M., Ludwig, A., Tanzer, R. & Schützenhöfer, W., 2007, Parameter Study on the Formation of Macrosegregation in a Large Steel Ingot. p. 126-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Particle Entrapment in the Mushy Region of a Steel Continuous Caster

    Pfeiler, C., Thomas, B. G., Ludwig, A. & Wu, M., 2007, Particle Entrapment in the Mushy Region of a Steel Continuous Caster. p. 247-252

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Selected Numerical Investigations on ESR Process

    Kharicha, A., Mackenbrock, A., Ludwig, A., Schützenhöfer, W., Maronnier, V., Wu, M., Köser, O. & Tanzer, R., 2007, Selected Numerical Investigations on ESR Process. p. 113-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    The Validation of a Multiphase Model for the Macrosegregations and Primary Structure of High Grade Steel Ingots

    Tanzer, R., Schützenhöfer, W., Reiter, G., Fauland, H. P., Könözsy, L., Ishmurzin, A., Wu, M. & Ludwig, A., 2007, The Validation of a Multiphase Model for the Macrosegregations and Primary Structure of High Grade Steel Ingots. p. 121-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Understanding the Macrosegregation Formation in Steel Castings: Examples of Multiphase Modelling

    Wu, M., Könözsy, L., Fjeld, A. & Ludwig, A., 2007, Understanding the Macrosegregation Formation in Steel Castings: Examples of Multiphase Modelling. p. 114-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Using a Multiphase Approach to Study the Macrosegregation Formation Mechanisms

    Wu, M., Könözsy, L., Fjeld, A. & Ludwig, A., 2007, Using a Multiphase Approach to Study the Macrosegregation Formation Mechanisms. p. 379-387

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Using a Three-Phase Deterministic Model for the Columnar-to-Equiaxed Transition (CET)

    Wu, M. & Ludwig, A., 2007, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 38, p. 1465-1475

    Research output: Contribution to journal › Article › Research › peer-review

  15. 2006
  16. Published

    A mixture two-phase model for predicting macrosegregations during solidification

    Tang, Y., Wu, M. & Ludwig, A., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 1. p. 283-290 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Control of interdendritic convection by the application of time-dependent magnetic fields during directional solidification of aluminium alloys

    Hainke, M., Dagner, J., Wu, M. & Ludwig, A., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 1. p. 317-324 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Modeling of macrosegregations in DC casting of Bronze

    Gruber-Pretzler, M., Mayer, F., Wu, M., Ludwig, A., Kuhn, H. A. & Riedle, J., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 2. p. 799-806 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Multiphase flow simulation of the cooling channel rheocasting process of A356 alloy

    Wang, T., Pustal, B., Wu, M., Bührig-Polaczek, Ludwig, A., Yao, S., Hao, H., Li, T., Cao, Z., Zhang, X. & Jin, J., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 2. p. 1071-1078 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Simulation of inclusion and bubble motion in a steel continuous caster

    Pfeiler, C., Wu, M., Ludwig, A., Chimani, C., Watzinger, J. & Dösinger, H., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 2. p. 737-744 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Volume averaging concept for mixed columnar-equiaxed solidification

    Wu, M. & Ludwig, A., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 1. p. 291-298 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Gravity-induced convection during directional solidification of hypermonotectic alloys

    Ludwig, A., Wu, M., Abondano, M. & Ratke, L., 1 Dec 2006, Solidification and Gravity IV - Proceedings of the 4th International Conference on Solidification and Gravity. p. 193-198 6 p. (Materials Science Forum; vol. 508).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    A three-phase model for mixed columnar-equiaxed solidification

    Wu, M. & Ludwig, A., 1 May 2006, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 37.2006, 5, p. 1613-1631 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    A 3-Phase Model for Mixed Columnar-Equiaxed Solidification

    Wu, M. & Ludwig, A., 2006, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 37A, p. 1613-1631

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    About the formation of macrosegregations in continuous casting of Sn-Bronze

    Ludwig, A., Gruber-Pretzler, M., Wu, M., Kuhn, A. & Riedle, J., 2006, In: Fluid Dynamics and Materials Processing. 1, p. 285-300

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    A Mixture Two-Phase Model for Macrosegregation during Solidification

    Tang, Y., Wu, M. & Ludwig, A., 2006, A Mixture Two-Phase Model for Macrosegregation during Solidification. p. 283-290

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    A Mixture Two-Phase Model for Macrosegregation during Solidification

    Tang, Y., Wu, M. & Ludwig, A., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    A Study of Macrosegregation Formation in Continuous Casting of a Technical CuSnP Bronze

    Gruber-Pretzler, M., Mayer, F., Ishmurzin, A., Wu, M. & Ludwig, A., 2006, A Study of Macrosegregation Formation in Continuous Casting of a Technical CuSnP Bronze. p. 799-806

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    A Study of Macrosegregation Formation in Continuous Casting of a Technical CuSnP Bronze

    Gruber-Pretzler, M., Mayer, F., Ishmurzin, A., Wu, M. & Ludwig, A., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Continous Casting of Hypermonotectic AlBiZn Alloys: Experimental Investigations and Numerical Simulation

    Gruber-Pretzler, M., Mayer, F., Wu, M., Moiseev, J., Tonn, B. & Ludwig, A., 2006, Continous Casting. p. 194-201

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  31. Published

    Control of Interdendritic Convection by the Application of Steady and Time-Dependent Magnetic Fields during Directional Solidification of Aluminium Alloys

    Hainke, M., Johannes, D., Wu, M. & Ludwig, A., 2006, Control of Interdendritic Convection by the Application of Steady and Time-Dependent Magnetic Fields during Directional Solidification of Aluminium Alloys. p. 317-324

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Control of Interdendritic Convection by the Application of Steady and Time-Dependent Magnetic Fields during Directional Solidification of Aluminium Alloys

    Hainke, M., Dagner, J., Wu, M. & Ludwig, A., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Graviy-Induced Convection during Directional Solidification of Hypermonotectic Alloys

    Ludwig, A., Wu, M., Abondano, M. & Ratke, L., 2006, In: Materials Science Forum . 508-509, p. 193-198

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Modeling Macrosegregation with a Multiphase Approach: Examples and Applications

    Wu, M. & Ludwig, A., 2006, In: JOM. 58, p. 16-18

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Modeling of Macrosegregations in Continous Casting of Sn-Bronze

    Gruber-Pretzler, M., Mayer, F., Wu, M. & Ludwig, A., 2006, Continous Casting. p. 219-225

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  36. Published

    Modeling of the thermo-solutal convection, shrinkage flow and grain movement during globular equiaxed solidification in a multiphase system-II. Application of model

    Wu, M., 2006, In: Jinshu-xuebao : Acta metallurgica Sinica. 42, p. 591-598

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Modeling of the thermo-solutal convection, shrinkage flow and grain movement during globular equiaxed solidification in a multiphase system-I. three phase flow model

    Wu, M., 2006, In: Jinshu-xuebao : Acta metallurgica Sinica. 42, p. 584-590

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Modelling of the thermo-solutal convection, shrinkage flow and grain movement during globular equiaxed solidification in a multi-phase system - II. Application of model

    Wang, T., Li, T., Jin, J., Cao, Z., Grimmig, T., Bührig-Polaczek, A., Wu, M. & Ludwig, A., 2006, In: Jinshu-xuebao : Acta metallurgica Sinica. 42, p. 591-598

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Modelling of the thermo-solutal convection, shrinkage flow and grain movement during globular equiaxed solidification in a multi-phase system - I. Three-phase flow model

    Wang, T., Zhang, X., Jin, J., Wu, M., Ludwig, A., Pustal, B. & Bührig-Polaczek, A., 2006, In: Jinshu-xuebao : Acta metallurgica Sinica. 42, p. 584-590

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Multiphase Flow Simulation of the Cooling Channel Rheocasting Process of A-356 Alloy

    Wang, T., Pustal, B., Wu, M., Bührig-Polaczek, A., Ludwig, A., Yao, S., Hao, H., Li, T., Cao, Z., Zhang, X. & Jin, J., 2006, Multiphase Flow Simulation of the Cooling Channel Rheocasting Process of A-356 Alloy. p. 1071-1078

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Performance Studie zu Parallelrechnungen (Shared Memory vs. Cluster) von metallurgischen Mehrphasensimulationen

    Mayer, F., Wu, M., Ludwig, A., Gruber-Pretzler, M., Pfeiler, C., Hainke, M. & Otto, K.-J., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Simulation of Particle and Bubble Motion in a Steel Continuous Caster

    Pfeiler, C., Ludwig, A. & Wu, M., 2006, TMS Proceedings. p. 737-744

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Volume Averaging Concept for the Mixed Columnar-Equiaxed Solidification

    Wu, M. & Ludwig, A., 2006, Volume Averaging Concept for the Mixed Columnar-Equiaxed Solidification. p. 291-298

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. 2005
  45. Published

    Modeling the columnar-to-equiaxed transition with a three-phase Eulerian approach

    Ludwig, A. & Wu, M., 15 Dec 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 109-114 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Simulation of cooling channel rheocasting process of A356 aluminum alloy using three-phase volume averaging model

    Wang, T., Pustal, B., Abondano, M., Grimmig, T., Bührig-Polaczek, A., Wu, M. & Ludwig, A., 1 Apr 2005, In: Transactions of Nonferrous Metals Society of China (English Edition). 15, 2, p. 389-394 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    A 3D Three-Phase Eulerian Solidification Model for the Columnar-to-Equiaxed Transition (CET)

    Wu, M. & Ludwig, A., 2005, Int. Conf. on “Simulation and Modelling of Metallurgical Processes in Steelmaking. p. 273-286

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    A Way of Coupling Ternary Phase Diagram Information with Multiphase Solidification Simulations

    Ludwig, A., Gruber-Pretzler, M., Mayer, F., Ishmurzin, A. & Wu, M., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 485-489

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Continuous Casting of Hypermonotectic AlBiZn Alloys: Experimental Investigations and Numerical Simulation

    Gruber-Pretzler, M., Mayer, F., Wu, M., Moiseev, J., Tonn, B. & Ludwig, A., 2005, Int. Conf. on „Continuous Casting of Non-Ferrous Metals". p. 194-201

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Influence of Argon Gas Bubbles and Non-Metallic Inclusions on the Flow Behavior in Steel Continuous Casting

    Pfeiler, C., Wu, M. & Ludwig, A., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 115-120

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Modeling of Macrosegregations in Continuous Casting of Sn-Bronze

    Gruber-Pretzler, M., Mayer, F., Wu, M. & Ludwig, A., 2005, Int. Conf. on „Continuous Casting of Non-Ferrous Metals". p. 219-225

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Modelling the Columnar-to-Equiaxed Transition with a 3-Phase Eulerian Approach

    Ludwig, A. & Wu, M., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 109-114

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Modelling the Thermosolutal Convection, Shrinkage Flow and Grain Movement of Globular Equiaxed Solidification Using a Three Phase Model

    Wang, T., Wu, M., Ludwig, A., Abondano, M., Pustal, B. & Bührig-Polaczek, A., 2005, In: International journal of cast metals research. 18, p. 221-228

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...4 5 6 7 8 9 Next
View graph of relations

Contact

Phone: 3103

Latest Research Output

View more (427)