Menghuai Wu

51 - 100 out of 427Page size: 50

Research output

  1. 2023
  2. Published

    On modelling conjugated heat transfer in the thin slab CC mold and solid shell formation under the applied EMBr

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J., Bohacek, J. & Kharicha, A., 2023, In: IOP Conference Series: Materials Science and Engineering. 2023, 1274, 7 p., 012023.

    Research output: Contribution to journal › Conference article › peer-review

  3. Published

    Potential etutectic accumulation in single crytal turbine blade due to geometry effect: a numerical study

    Zhang, H., Ma, D., Ludwig, A., Kharicha, A. & Wu, M., 2023, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Conference article › peer-review

  4. Published

    Simulations of 3D Hydrogen Electric Arc and Effect of External Magnetic Field on Arc Flow Dynamics

    Al Nasser, M., Barati, H., Redl, H., Ishmurzin, A., Voller, N., Hackl, G., Wu, M., Ludwig, A. & Kharicha, A., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  5. Published

    Transient simulation of melt flow, clogging, and clog fragmentation inside SEN during steel continuous casting

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 2023. 9 p.

    Research output: Contribution to conference › Paper › peer-review

  6. 2022
  7. Published

    Experimental and numerical investigations of arc plasma expansion in an industrial vacuum arc remelting (VAR) process

    Karimi-Sibaki, E., Peyha, M., Vakhrushev, A., Wu, M., Ludwig, A., Bohacek, J., Preiss, B. & Kharicha, A., Dec 2022, In: Scientific reports (e-only). 2022, 12, 14 p., 20405.

    Research output: Contribution to journal › Article › Research › peer-review

  8. E-pub ahead of print

    Dendrite fragmentation mechanism under forced convection condition by rotating magnetic field during unidirectional solidification of AlSi7 alloy

    Zhang, H., Wu, M., Rodrigues, C. M. G., Ludwig, A., Kharicha, A., Rónaföldi, A., Roósz, A., Veres, Z. & Svéda, M., 28 Sept 2022, (E-pub ahead of print) In: Acta Materialia. 241.2022, December, 14 p., 118391.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Experimental Evaluation of MHD Modeling of EMS During Continuous Casting

    Zhang, H., Wu, M., Zhang, Z., Ludwig, A., Kharicha, A., Rónaföldi, A., Roósz, A., Veres, Z. & Svéda, M., Aug 2022, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 53.2022, 4, p. 2166-2181 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Tornados and cyclones driven by Magneto-hydrodynamic forces

    Kharicha, A., Al-Nasser, M., Barati, H., Karimi-Sibaki, E., Vakhrushev, A., Abdi, M., Ludwig, A. & Wu, M., 1 Jul 2022, In: European Journal of Mechanics - B/Fluids. 94.2022, July-August, p. 90-105 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. E-pub ahead of print

    The Role of Mold Electromagnetic Stirring in the Dissipation of Superheat during the Continuous Casting of Billets

    Zhang, Z., Wu, M., Zhang, H., Ludwig, A. & Kharicha, A., 29 Jun 2022, (E-pub ahead of print) In: Steel research international. 93.2022, 10, 14 p., 2200065.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Validation of a capillary-driven fragmentation model during mixed columnar-equiaxed solidification with melt convection and grain transport

    Rodrigues, C. M. G., Wu, M., Zhang, H., Ludwig, A. & Kharicha, A., Jun 2022, In: Materialia. 23.2022, June, 12 p., 101462.

    Research output: Contribution to journal › Article › Research › peer-review

  13. E-pub ahead of print

    Numerical modeling and experimental validation of the effect of arc distribution on the as-solidified Ti64 ingot in vacuum arc remelting (VAR) process

    Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Abdi, M., Wu, M., Ludwig, A., Bohacek, J. & Preiß, B., 11 May 2022, (E-pub ahead of print) In: Journal of Materials Research and Technology. 19.2022, July-August, p. 183-193 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Modeling Asymmetric Flow in the Thin-Slab Casting Mold Under Electromagnetic Brake

    Vakhrushev, A., Kharicha, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., May 2022, In: Steel research international. 93.2022, 5, 11 p., 2200088.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Norton-Hoff model for deformation of growing solid shell of thin slab casting in funnel-shape mold

    Vakhrushev, A., Kharicha, A., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J. & Rodrigues, C. M. G., 23 Mar 2022, In: Journal of iron and steel research international. 29.2022, 1, p. 88-102 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Modeling of the as-cast structure and macrosegregation in the continuous casting of a steel billet: Effect of M-EMS

    Zhang, Z., Wu, M., Zhang, H., Hahn, S., Wimmer, F., Ludwig, A. & Kharicha, A., Mar 2022, In: Journal of materials processing technology. 301.2022, March, 15 p., 117434.

    Research output: Contribution to journal › Article › Research › peer-review

  17. E-pub ahead of print

    Hydrodynamically driven facet kinetics in crystal growth

    Stefan-Kharicha, M., Kharicha, A., Zaidat, K., Reiss, G., Eßl, W., Goodwin, F., Wu, M., Ludwig, A. & Mugrauer, C., 31 Jan 2022, (E-pub ahead of print) In: Journal of crystal growth. 584.2022, 15 April, 8 p., 126557.

    Research output: Contribution to journal › Article › Research › peer-review

  18. 2021
  19. Published

    Reverse flows and flattening of a submerged jet under the action of a transverse magnetic field

    Kharicha, A., Vakhrushev, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 9 Dec 2021, In: Physical review research. 6.2021, 12, 123701.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Investigation of effect of electrode polarity on electrochemistry and magnetohydrodynamicsusing tertiary curent distribution in electroslag remelting process

    Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., 6 Dec 2021, In: Journal of iron and steel research international. 28.2021, December, p. 1551-1561 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. E-pub ahead of print

    Mathematical Modeling of the Early Stage of Clogging of the SEN During Continuous Casting of Ti-ULC Steel

    Barati, H., Wu, M., Michelic, S., Ilie, S., Kharicha, A., Ludwig, A. & Kang, Y. B., 20 Oct 2021, (E-pub ahead of print) In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52.2021, 6, p. 4167-4178 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    A Numerical Study on the Influence of an Axial Magnetic Field (AMF) on Vacuum Arc Remelting (VAR) Process

    Karimi Sibaki, E., Kharicha, A., Abdi, M., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., Oct 2021, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52, 5, p. 3354-3362 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Toward a Simplified Arc Impingement Model in a Direct-Current Electric Arc Furnace

    Al-Nasser, M., Kharicha, A., Barati, H., Pichler, C., Hackl, G., Gruber, M., Ishmurzin, A., Redl, C., Wu, M. & Ludwig, A., 17 Sept 2021, In: Metals. 11.2021, 9, 17 p., 1482.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Modelling melting and grain destruction phenomena during globular equiaxed solidification

    Zhang, H., Wu, M., Schumacher, P., Gomes Rodrigues, C., Ludwig, A. & Kharicha, A., Sept 2021, In: Applied Mathematical Modelling. 97.2021, September, p. 821-838 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    On Modelling Parasitic Solidification Due to Heat Loss at Submerged Entry Nozzle Region of Continuous Casting Mold

    Vakhrushev, A., Kharicha, A., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G., Watzinger, J. & Bohacek, J., 31 Aug 2021, In: Metals. 11.2021, 9, 20 p., 1375.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Bridging Capillary-Driven Fragmentation and Grain Transport with Mixed Columnar-EquiaxedSolidification

    Gomes Rodrigues, C., Wu, M., Zhang, H., Ludwig, A. & Kharicha, A., 12 Aug 2021, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 52.2021, October, p. 4609–4622 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Generation of Reverse Meniscus Flow by Applying An Electromagnetic Brake

    Vakhrushev, A., Kharicha, A., Karimi-Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J. & Eckert, S., 6 Jul 2021, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52.2021, 5, p. 3193-3207 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Directional Solidification of AlSi7Fe1 Alloy Under Forced Flow Conditions: Effect of Intermetallic Phase Precipitation and Dendrite Coarsening

    Zhang, H., Wu, M., Gomes Rodrigues, C., Ludwig, A. & Kharicha, A., 10 May 2021, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 52.2021, July, p. 3007-3022 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Hydrodynamically enhanced electrochemical mass transfer on the surface of an electrically conductive droplet

    Kharicha, A., Karimi Sibaki, E., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., 9 Apr 2021, In: International journal of heat and mass transfer. 57.2021, 4, p. 1697-1705 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Important Key Process Simulations in the Field of Steel Metallurgy

    Ludwig, A., Gomes Rodrigues, C., Zhang, Z., Zhang, H., Karimi Sibaki, E., Barati, H., Vakhrushev, A., Al Nasser, M., Wu, M. & Kharicha, A., 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 1, p. 2-9 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    NUMERICAL SIMULATION OF BUILD-UP GROWTH COUPLED WITH HYDRODYNAMICS

    Stefan-Kharicha, M., Kharicha, A., Reiss, G., Eßl, W., Mugrauer, C., Goodwin, F., Wu, M., Ludwig, A. & Zaidat, K., 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. 2020
  33. Published

    Two-phase vicoplastic model for the simulation of twin roll casting

    Gomes Rodrigues, C., Ludwig, A., Wu, M., Kharicha, A. & Vakhrushev, A., 1 Dec 2020, In: Journal of materials processing technology. 286.2020, December, 9 p., 116814.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Flow-solidification interaction: A numerical study on solidification of NH4Cl – 70 wt.%H2O solution in a water-cooled mould with a large sample thickness

    Wu, M., Stefan-Kharicha, M., Kharicha, A. & Ludwig, A., 15 Oct 2020, In: International journal of heat and mass transfer. 164.2021, January, 120566.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Geometrical effect on macrosegregation formation during unidirectional solidification of Al–Si alloy

    Zhang, H., Wu, M., Tewari, S. N., Ludwig, A. & Kharicha, A., 24 Sept 2020, In: Journal of materials processing technology. 288.2021, February, 12 p., 116913.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Electric Current Distribution During Electromagnetic Braking in Continuous Casting

    Vakhrushev, A., Kharicha, A., Liu, Z., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., 2 Sept 2020, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 51.2020, 6, p. 2811-2828 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Role of Solidification in Submerged Entry Nozzle Clogging During Continuous Casting of Steel

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 16 Jul 2020, In: Steel research international. 91.2020, 12, 9 p., 2000230.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Impact of hydrodynamics on growth and morphology of faceted crystals

    Stefan-Kharicha, M., Kharicha, A., Zaidat, K., Reiss, G., Eßl, W., Goodwin, F., Wu, M., Ludwig, A. & Mugrauer, C., 1 Jul 2020, In: Journal of crystal growth. 541.2020, 1 July, 11 p., 125667.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Modeling mixed columnar-equiaxed solidification of Sn-10wt%Pb alloy under forced convection driven by travelling magnetic stirring

    Zhang, Z., Wu, M., Zhang, H., Karimi-Sibaki, E., Ludwig, A. & Kharicha, A., 12 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 861, 1, 012024.

    Research output: Contribution to journal › Conference article › peer-review

  40. Published

    Impact of crystal sedimentation and viscoplastic semi-solid dynamics on macrosegregation

    Gomes Rodrigues, C., Ludwig, A. (Co-editor), Wu, M. (Co-editor), Kharicha, A. (Co-editor) & Vakhrushev, A. (Co-editor), Jun 2020, IOP Conf. Series: Mater.Sci.Eng.. Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  41. Published

    Influence of crystal fragmentation on the formation of microstructure and macrosegregation during directional solidification under forced convection condition

    Zhang, H., Wu, M. (Co-editor), Zhang, Z. (Co-editor), Ludwig, A. (Co-editor) & Kharicha, A. (Co-editor), Jun 2020, IOP conf. Series: Mater. Sci. Eng.. Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  42. Published

    Modeling mixed columnar-equiaxed solificiation of Sn-10wt% alloy under forced convection driven by travelling magnetic stirring

    Zhang, Z., Wu, M. (Co-editor), Zhang, H. (Co-editor), Karimi Sibaki, E. (Co-editor), Ludwig, A. (Co-editor) & Kharicha, A. (Co-editor), Jun 2020, IOP Conf. Series: Mater. Sci. Eng. . Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  43. Published

    Modelling of shear bands during solidification

    Ludwig, A., Gomes Rodrigues, C. (Co-editor), Wu, M. (Co-editor) & Kharicha, A. (Co-editor), Jun 2020, IOP Conf. Series: Mater. Sci.Eng. . online, Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  44. Published

    Modelling viscoplastic behavior of solidifying shell under applied electromagnetic breaking during continuous casting

    Vakhrushev, A., Kharicha, A. (Co-editor), Wu, M. (Co-editor), Ludwig, A. (Co-editor), Nitzl, G. (Co-editor), Tang, Y. (Co-editor), Hackl, G. (Co-editor), Watzinger, J. (Co-editor) & Gomes Rodrigues, C. (Co-editor), Jun 2020, IOP Conf. Series: mater. Sci. Eng.. Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  45. Published

    Numerical investigation of an in-situ observed flow regimes during solidification of an NH 4Cl - 70wt%H 2O solution

    Wu, M. & Stefan-Kharicha, M. (Co-editor), Jun 2020, IOP Conf. Series: Mater. Sci. Eng.. Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  46. Published

    A 2D Multiphase Model of Drop Behavior during Electroslag Remelting

    Chaulet, J., Kharicha, A., Charmond, S., Dussoubs, B., Hans, S., Wu, M., Ludwig, A. & Jardy, A., 8 Apr 2020, In: Metals. 10.2020, 4, 16 p., 490.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Numerical study of the role of mush permeability in the solidifying mushy zone under forced convection

    Zhang, H., Wu, M., Zheng, Y., Ludwig, A. & Kharicha, A., 1 Mar 2020, In: Materials Today Communications. 22.2020, March, 9 p., 100842.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    A Numerical Investigation on the Electrochemical Behavior of CaO and Al2O3 in the ESR Slags

    Karimi-Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 20 Feb 2020, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 51.2020, 3, p. 871-879 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. E-pub ahead of print

    A volume of fluid (VOF) method to model shape change during electrodeposition

    Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., 31 Jan 2020, (E-pub ahead of print) In: Electrochemistry Communications. 112.2020, 106675.

    Research output: Contribution to journal › Article › Research › peer-review

  50. 2019
  51. E-pub ahead of print

    A Parametric Study of the Vacuum Arc Remelting (VAR) Process: Effects of Arc Radius, Side-Arcing, and Gas Cooling

    Karimi-Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 29 Oct 2019, (E-pub ahead of print) In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 51.2020, 1, p. 222-235 p 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    A Dynamic Mesh Method to Model Shape Change during Electrodeposition

    Karimi-Sibaki, E., Kharicha, A., Abdi, M., Wu, M., Ludwig, A. & Bohacek, J., 31 Jul 2019, In: Journal of the Electrochemical Society. 166.2019, 12, p. D521-D529 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Diffusion-Reaction-Limited Mass Transfer on the Surface of an Electrically Conductive Droplet

    Kharicha, A., Karimi Sibaki, E., Wu, M., Ludwig, A. & Bohacek, J., Jul 2019.

    Research output: Contribution to conference › Paper

  54. Published

    Interaction between flow and faceted crystal growth

    Stefan-Kharicha, M., Kharicha, A., Zaidat, K., Wu, M., Ludwig, A., Mogeritsch, J., Reiss, G. & Eßl, W., 19 Jun 2019.

    Research output: Contribution to conference › Poster › Research

  55. Published

    On modelling viscoplastic behavior of the solidifying shell in the funnel-type continuous casting mold

    Vakhrushev, A., Kharicha, A., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watziger, J. & Rodrigues, C. M. G., 17 Jun 2019, In: IOP Conference Series: Materials Science and Engineering. 529, 1, 012081.

    Research output: Contribution to journal › Conference article › peer-review

Previous 1 2 3 4 5 6 7 8 9 Next
View graph of relations

Contact

Phone: 3103

Latest Research Output

View more (427)