Martin Spörk

1 - 49 out of 49Page size: 100

Research output

  1. 2022
  2. Published

    Toward a new generation of vaginal pessaries via 3D-printing: Concomitant mechanical support and drug delivery

    Eder, S., Wiltschko, L., Koutsamanis, I., Afonso Urich, J. A., Arbeiter, F., Roblegg, E. & Spoerk, M., May 2022, In: European Journal of Pharmaceutics and Biopharmaceutics. 174.2022, May, p. 77-89 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Mechanical properties of additively manufactured polymeric implant materials in dependence of microstructure, temperature and strain-rate

    Petersmann, S., Spörk, M., Van De Steene, W., Üçal, M., Wiener, J., Pinter, G. G. & Arbeiter, F., 5 Apr 2022, Abstract Book of 18th European Mechanics of Materials Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. 2021
  5. Published

    Personalised urethra pessaries prepared by material extrusion-based additive manufacturing

    Spoerk, M., Arbeiter, F., Koutsamanis, I., Cajner, H., Katschnig, M. & Eder, S., 25 Oct 2021, In: International Journal of Pharmaceutics. 608.2021, 25 October, 13 p., 121112.

    Research output: Contribution to journal › Article › Research › peer-review

  6. 2020
  7. Published

    Damage tolerance-based methodology for fatigue lifetime estimation of a structural component produced by material extrusion-based additive manufacturing

    Arbeiter, F., Trávníček, L., Petersmann, S., Dlhý, P., Spoerk, M., Pinter, G. & Hutař, P., Dec 2020, In: Additive Manufacturing. 36, 101730.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Using Compliant Interlayers as Crack Arresters in 3-D-Printed Polymeric Structures

    Arbeiter, F., Petersmann, S., Wiener, J., Oesterreicher, F., Spörk, M. & Pinter, G. G., 1 Nov 2020, In: Materials Performance and Characterization. 9, 5, 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Process-induced morphological features in material extrusion-based additive manufacturing of polypropylene

    Petersmann, S., Spörk-Erdely, P., Feuchter, M., Wieme, T., Arbeiter, F. & Spörk, M., 18 Jun 2020, In: Additive Manufacturing. 35.2020, October, 16 p., 101384.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    Additive Manufacturing of Steel and Copper Using Fused Layer Modelling: Material and Process Development

    Ecker, J. V., Dobrezberger, K., Gonzalez-Gutierrez, J., Spoerk, M., Gierl-Mayer, C. & Danninger, H., 15 Jun 2020, (E-pub ahead of print) In: Powder metallurgy progress. 19.2019, 2, p. 63-81 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Mechanical properties of polymeric implant materials produced by extrusion-based additive manufacturing

    Petersmann, S., Spörk, M., Van De Steene, W., Üçal, M., Wiener, J., Pinter, G. G. & Arbeiter, F., 1 Apr 2020, In: Journal of the Mechanical Behavior of Biomedical Materials. 104.2020, April, 13 p., 103611.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Accepted/In press

    Structural integrity of shrinkage and warpage optimized polypropylene produced by material extrusion-based additive manufacturing

    Petersmann, S., Spörk, M., Wiener, J., Pinter, G. G. & Arbeiter, F., 2020, (Accepted/In press).

    Research output: Contribution to conference › Abstract › peer-review

  13. 2019
  14. E-pub ahead of print

    Material extrusion-based additive manufacturing of polypropylene: A review on how to improve dimensional inaccuracy and warpage

    Spörk, M., Holzer, C. & Gonzalez-Gutierrez, J., 15 Oct 2019, (E-pub ahead of print) In: Journal of applied polymer science. 137.2020, 12, 16 p., 48454.

    Research output: Contribution to journal › Review article › peer-review

  15. E-pub ahead of print

    Impact Optimization of 3D‐Printed Poly(methyl methacrylate) for Cranial Implants

    Petersmann, S., Spoerk, M., Huber, P., Lang, M., Pinter, G. & Arbeiter, F., 30 Aug 2019, (E-pub ahead of print) In: Macromolecular materials and engineering. 304.2019, 11, 10 p., 1900263.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Mechanical Recyclability of Polypropylene Composites Produced by Material Extrusion-Based Additive Manufacturing

    Spörk, M., Arbeiter, F., Raguz, I., Holzer, C. & Gonzales-Gutierrez, J., 7 Aug 2019, In: Polymers. 11.2019, 8, 18 p., 1318.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Inter-layer bonding characterisation between materials with different degrees of stiffness processed by fused filament fabrication

    Khudiakova, A., Arbeiter, F., Spoerk, M., Wolfahrt, M., Godec, D. & Pinter, G., 1 Aug 2019, In: Additive Manufacturing. 28.2019, August, p. 184-193 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    A trouble‐free first layer adhesion for polypropylene‐based materials in material extrusion‐based additive manufacturing

    Spörk, M., Gonzalez-Gutierrez, J., Lichal, C., Cajner, H., Berger-Weber, G., Schuschnigg, S., Cardon, L. & Holzer, C., 31 May 2019, p. 327. 1 p.

    Research output: Contribution to conference › Abstract

  19. Published

    Using soft interlayers as crack arrester in polymeric 3D-printed structures

    Arbeiter, F., Spörk, M., Wiener, J., Oesterreicher, F. & Pinter, G. G., 17 May 2019, 19th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics. p. 1 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Erhöhung der Bruchzähigkeit durch Multischichtaufbau

    Arbeiter, F., Oesterreicher, F., Wiener, J., Spörk, M. & Pinter, G. G., 26 Apr 2019, 28. Leobener Kunststoff-Kolloquium 2019. 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Optimisation of the interfacial bonding in polypropylene filled with different types of glass spheres produced by extrusion-based additive manufacturing

    Spörk, M. & Gonzalez-Gutierrez, J., 8 Apr 2019, p. 87-87. 1 p.

    Research output: Contribution to conference › Abstract

  22. Published

    Additive manufacturing of zirconia parts by fused filament fabrication and solvent debinding: Selection of binder formulation

    Cano Cano, S., Gonzalez-Gutierrez, J., Sapkota, J., Spörk, M., Arbeiter, F., Schuschnigg, S., Holzer, C. & Kukla, C., 1 Mar 2019, In: Additive Manufacturing. 26.2019, March, p. 117–128 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Mechanical Characterization of PMMA Produced by Fused Filament Fabrication as a Potential Material for Cranial Bone Reconstruction

    Petersmann, S., Spörk, M., Lang, M. C., Moser, C., Pinter, G. G. & Arbeiter, F., 2019, Abstract Book of the First European Conference on Structural Integrity of Additively Manufactured Materials. 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. 2018
  25. Published

    Designing formulation variables of extrusion-based manufacturing of carbon black conductive polymer composites for piezoresistive sensing

    Duan, L., Spörk, M., Wieme, T., Cornillie, P., Xia, H., Zhang, J., Cardon, L. & D'hooge, D. R., 13 Dec 2018, In: Composites science and technology. 171.2019, 8 February, p. 78-85 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    The consequences of different printing chamber temperatures in extrusion-based additive manufacturing

    Spörk, M., Arbeiter, F., Raguz, I., Traxler, G., Schuschnigg, S., Cardon, L. & Holzer, C., 21 Sept 2018.

    Research output: Contribution to conference › Paper › peer-review

  27. Published

    Anisotropic properties of oriented short carbon fibre filled polypropylene parts fabricated by extrusion-based additive manufacturing

    Spoerk, M., Savandaiah, C., Arbeiter, F., Traxler, G., Cardon, L., Holzer, C. & Sapkota, J., 11 Jun 2018, In: Composites Part A: Applied Science and Manufacturing. 113.2018, October, p. 95-104 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Facile and Low-Cost Route for Sensitive Stretchable Sensors by Controlling Kinetic and Thermodynamic Conductive Network Regulating Strategies

    Duan, L., D'hooge, D. R., Spörk, M., Cornillie, P. & Cardon, L., 29 May 2018, In: ACS Applied Materials & Interfaces. 10.2018, 26, p. 22678-22691 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Adhesion of standard filament materials to different build platforms in material extrusion additive manufacturing

    Schuschnigg, S., Gonzalez-Gutierrez, J., Spörk, M., Sapkota, J. & Holzer, C., 21 May 2018, 34 th International Conference of the Polymer Processing society. Liu, S.-J. (ed.). Taipei, Taiwan, Vol. 34. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Polypropylene Filled With Glass Spheres in Extrusion‐Based Additive Manufacturing: Effect of Filler Size and Printing Chamber Temperature

    Spörk, M., Arbeiter, F., Raguž, I., Weingrill, G., Fischinger, T., Traxler, G., Schuschnigg, S., Cardon, L. & Holzer, C., 16 May 2018, In: Macromolecular materials and engineering. 303.2018, 7, 15 p., 1800179.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Material selection, testing and validation of additively manufactured components

    Wiener, J., Arbeiter, F., Spörk, M., Gosch, A. & Pinter, G. G., 9 May 2018.

    Research output: Contribution to conference › Paper › peer-review

  32. Published

    Optimisation of the Adhesion of Polypropylene-Based Materials during Extrusion-Based Additive Manufacturing

    Spörk, M., Gonzalez-Gutierrez, J., Lichal, C., Cajner, H., Berger, G., Schuschnigg, S., Cardon, L. & Holzer, C., 2 May 2018, In: Polymers. 10.2018, 5, 16 p., 490.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Strukturbauteile aus dem 3D-Drucker: begleitende Werkstoffprüfung zur Eigenschaftsoptimierung

    Arbeiter, F., Wiener, J., Spörk, M. & Pinter, G. G., 20 Apr 2018, p. 1. 4 p.

    Research output: Contribution to conference › Paper

  34. Published

    Entwicklungen im Bereich Fused Filament Fabrication

    Schuschnigg, S., Spörk, M. & Holzer, C., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben: Eigenverlag, Vol. 27. p. 19-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Polypropylene/Cellulose Composites for Material Extrusion Additive Manufacturing

    Kaynak, B., Spörk, M., Shirole, A., Ziegler, W. & Sapkota, J., 14 Apr 2018, In: Macromolecular materials and engineering. 303.2018, 5, 8 p., 1800037.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Influence of strand orientation on mechanical properties in near homogeneous FFF produced PLA parts

    Wiener, J., Arbeiter, F., Spörk, M., Gosch, A. & Pinter, G. G., 27 Mar 2018.

    Research output: Contribution to conference › Poster › Research

  37. Published

    Fracture mechanical characterization and lifetime estimation of near-homogeneous components produced by fused filament fabrication

    Arbeiter, F., Spoerk, M., Wiener, J., Gosch, A. & Pinter, G., 5 Jan 2018, In: Polymer Testing. 66.2018, April, p. 105-113 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Optimisation of the Mechanical Properties and Processing of Polypropylene and Poly(Lactic Acid) Parts Produced by Extrusion-Based Additive Manufacturing

    Spörk, M., 2018

    Research output: Thesis › Doctoral Thesis

  39. 2017
  40. Published

    Optimization of Mechanical Properties of Glass-Spheres-Filled Polypropylene Composites for Extrusion-Based Additive Manufacturing

    Spörk, M., Savandaiah, C., Arbeiter, F., Sapkota, J. & Holzer, C., 26 Dec 2017, In: Polymer Composites. 40.2019, 2, p. 638-651 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    3D printing conditions determination for feedstock used in fused filament fabrication (FFF) of 17-4PH stainless steel parts

    Gonzalez-Gutierrez, J., Godec, D., Guran, R., Spörk, M., Kukla, C. & Holzer, C., 15 Nov 2017, In: Metalurgija : casopis Izdaje Tehnoloski Fakultet Sveucilista u Zagrebu, Odjeli u Sisku, Institut za Metalurgiju i Zeljezara Sisak = Metallurgy. 57.2018, 1-2, p. 117-120 4 p., 669.15:621.775:669.015:66.049.4:621.385.833=111.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Effect of the printing bed temperature on the adhesion of parts produced by fused filament fabrication

    Spörk, M., Gonzalez-Gutierrez, J., Sapkota, J., Schuschnigg, S. & Holzer, C., 8 Nov 2017, In: Plastics, rubber and composites. 47.2018, 1, p. 17-24 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. E-pub ahead of print

    Shrinkage and Warpage Optimization of Expanded-Perlite-Filled Polypropylene Composites in Extrusion-Based Additive Manufacturing

    Spörk, M., Sapkota, J., Weingrill, G., Fischinger, T., Arbeiter, F. & Holzer, C., 4 Jul 2017, (E-pub ahead of print) In: Macromolecular materials and engineering. 302.2017, 10, 13 p., 1700143.

    Research output: Contribution to journal › Article › Research › peer-review

  44. E-pub ahead of print

    Parametric optimization of intra- and inter-layer strengths in parts produced by extrusion-based additive manufacturing of poly(lactic acid)

    Spörk, M., Arbeiter, F., Cajner, H., Sapkota, J. & Holzer, C., 26 Jun 2017, (E-pub ahead of print) In: Journal of Applied Polymer Science. 134.2017, 41, 15 p., 45401.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Properties of glass filled polypropylene for Fused Filament Fabrication

    Spörk, M., Savandaiah, C., Arbeiter, F., Schuschnigg, S. & Holzer, C., May 2017.

    Research output: Contribution to conference › Paper › peer-review

  46. 2016
  47. Published

    Special Materials and Technologies for Fused Filament Fabrication

    Spörk, M., Gonzalez-Gutierrez, J., Schuschnigg, S. & Holzer, C., 11 Oct 2016, 2016 PPS Asia/Australia Conference. Chengdu, China, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Bonding forces in Fused Filament Fabricaiton

    Spörk, M., 23 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  49. Published

    Bonding Forces in Fused Filament Fabrication

    Spörk, M., Schuschnigg, S., Holzer, C., Arbeiter, F. & Berger, G., 23 Sept 2016.

    Research output: Contribution to conference › Abstract › peer-review

  50. Published

    Entwicklung von Polyolefinen für den Fused Filament Fabrication (FFF) Prozess

    Spörk, M., Schuschnigg, S. & Holzer, C., 14 May 2016.

    Research output: Contribution to conference › Poster › Research

  51. Published

    Entwicklung von Polyolefinen für den Fused Filament Fabrication Prozess

    Spörk, M., Schuschnigg, S. & Holzer, C., 14 Apr 2016, p. 203-204. 210 p.

    Research output: Contribution to conference › Abstract

  52. Published

    Haftungsvorhersage und Haftungsverbesserung im Fused Filament Fabrication (FFF) Prozess

    Schuschnigg, S., Huber, P., Holzer, C. & Spörk, M., 14 Apr 2016.

    Research output: Contribution to conference › Poster › Research

  53. Published

    Haftungsvorhersage und Haftungsverbesserung im Fused Filament Fabrication (FFF) Prozess

    Schuschnigg, S., Huber, P., Spörk, M. & Holzer, C., 14 Apr 2016, p. 201. 2 p.

    Research output: Contribution to conference › Abstract

  54. 2015
  55. Published

    Grafting of vinyl phosphoric acid monomers for the crosslinking of polypropylene

    Mattausch, H., Spörk, M., Rieß, G. & Holzer, C., 2015.

    Research output: Contribution to conference › Poster › Research

  56. Published

    Grafting of vinyl phosphoric acid monomers for the crosslinking of polypropylene

    Mattausch, H., Spörk, M., Rieß, G. & Holzer, C., 2015, PPS Graz - Konferenzbeitrag.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Investigations on the flame retardant and crosslinking properties of polypropylene compounds grafted with nitrogen and phosphorus containing monomers

    Spörk, M., 2015

    Research output: Thesis › Master's Thesis

View graph of relations

Latest Research Output

View more (49)