Martin Leitner

(Former)

1 - 50 out of 204Page size: 50

Research output

  1. 2021
  2. Published

    Effect of Surface Layer on the Fatigue Strength of Selectively Laser Melted 17-4 PH Steel

    Leitner, M., Schneller, W., Springer, S. & Grün, F., Jul 2021, In: Journal of Materials Engineering and Performance. 30, 7, p. 5383-5391 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Fatigue strength assessment of additively manufactured metallic structures considering bulk and surface layer characteristics

    Schneller, W., Leitner, M., Pomberger, S., Grün, F., Leuders, S., Pfeifer, T. & Jantschner, O., Apr 2021, In: Additive Manufacturing. 40.2021, April, 12 p., 101930.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Impact of microstructural properties on the crack threshold of aluminium castings

    Oberreiter, M., Aigner, R., Pomberger, S., Leitner, M. & Stoschka, M., Jan 2021, In: Engineering Fracture Mechanics. 241, 10 p., 107431.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    FEM Analysis of Fatigue Crack Growth in Low Carbon Steel Using Single Edge Notched Tension Specimen

    Busari, Y. O., Manurung, Y. H. P., Shuaib-Babata, Y. L., Leitner, M. & Celik, E., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 645-655 11 p. (Lecture Notes in Mechanical Engineering; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Grain Growth Prediction of SS316L Stainless Steel of Bead-On-Plate Using Numerical Computation

    Mat, M. F., Manurung, Y. H. P. M., Muhammad, N., Ahmad, S. N., Adenan, M. S. & Leitner, M., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 1-11 11 p. (Lecture Notes in Mechanical Engineering; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Investigation of Material Property Model on Substrate Deformation Induced by Thick-Walled WAAM Process Using Numerical Computation

    Ahmad, S. N., Manurung, Y. H. P., Mat, M. F. & Leitner, M., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 747-761 15 p. (Lecture Notes in Mechanical Engineering; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Numerical Simulation on Residual Stress and Substrate Deformation of Bead-On-Plate of SS316L Using Inherent Strain Method

    Ahmad, S. N., Manurung, Y. H. P., Taufek, T. & Leitner, M., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 723-738 16 p. (Lecture Notes in Mechanical Engineering; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. 2020
  10. E-pub ahead of print

    Fatigue strength estimation methodology of additively manufactured metallic bulk material

    Schneller, W., Leitner, M., Leuders, S., Sprauel, J. M., Grün, F., Pfeifer, T. & Jantschner, O., 4 Nov 2020, (E-pub ahead of print) In: Additive Manufacturing. 39.2021, March, 13 p., 101688.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Effect of load stress ratio on nominal and effective notch fatigue strength assessment of HFMI-treated high-strength steel cover plates

    Leitner, M. & Stoschka, M., 1 Oct 2020, In: International Journal of Fatigue. 139, October, 7 p., 105784.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Validation of the fatigue strength assessment of HFMI-treated steel joints under variable amplitude loading

    Leitner, M., Stoschka, M., Barsoum, Z. & Farajian, M., 23 Jun 2020, In: Welding in the world. 64.2020, 10, p. 1681-1689 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    FEM Simulation Procedure for Distortion and Residual Stress Analysis of Wire Arc Additive Manufacturing

    Nursyahirah Binti Ahmad , S., Manurung, Y., Mat, M. F., Minggu, Z., Jaffar, A., Prüller, S. & Leitner, M., 22 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 2020, 834, 11 p., 012083.

    Research output: Contribution to journal › Conference article › peer-review

  14. Published

    Grain Growth Prediction of Bead-on-Plate with Filler Wire SS316L using FEM

    Faiz Mat, M., Manurung, Y. H. P., Muhammad, N., Ditler, A., Syakir Abd Ghani, M. & Leitner, M., 22 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 2020, 834, 012009.

    Research output: Contribution to journal › Conference article › peer-review

  15. Published

    Prediction of Crack Propagation Rate and Stress Intensity Factor of Fatigue and Welded Specimen with a Two-Dimensional Finite Element Method

    Olanrewaju Busari, Y., Ariri , A., Manurung, Y., Sebayang, D., Leitner, M., Zaini, W. S. B. W., Kamilzukairi, M. A. B. M. & E. Celik, E., 22 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 2020, 834, 14 p., 012008.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Validation Study on the Statistical Size Effect in Cast Aluminium

    Oberreiter, M., Pomberger, S., Leitner, M. & Stoschka, M., 27 May 2020, In: Metals : open access journal . 10.2020, 6, p. 710 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Effect of increased yield strength, R-ratio, and plate thickness on the fatigue resistance of high-frequency mechanical impact (HFMI)–treated steel joints

    Leitner, M. & Barsoum, Z., 13 May 2020, In: Welding in the world. 64.2020, 7, p. 1245-1259 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Probabilistic Surface Layer Fatigue Strength Assessment of EN AC-46200 Sand Castings

    Pomberger, S., Oberreiter, M., Leitner, M., Stoschka, M. & Thuswaldner, J., 9 May 2020, In: Metals : open access journal . 10.2020, 5, p. 616 26 p., 616.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg

    Schneller, W., Leitner, M., Springer, S., Grün, F. & Taschauer, M., 1 Apr 2020, Selective Laser Melting: Materials and Applications. p. 4-12

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  20. Published

    Linear Elastic FE-Analysis of porous, laser welded, heat treatable, aluminium high pressure die castings based on X-ray computed tomography data

    Teichmann, F., Ziemer, A., Leitner, M., Hensel, J. & Dilger, K., 2 Mar 2020, In: Materials. 13, 6, 1420.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Fatigue crack growth model including load sequence effects – Model development and calibration for railway axle steels

    Maierhofer, J., Gänser, H. P., Simunek, D., Leitner, M., Pippan, R. & Luke, M., 1 Mar 2020, In: International Journal of Fatigue. 132.2020, March, 11 p., 105377.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Local strain energy density approach to assess the fatigue strength of sharp and blunt V-notches in cast steel

    Schuscha, M., Leitner, M., Stoschka, M. & Meneghetti, G., 1 Mar 2020, In: International Journal of Fatigue. 132.2020, March, 105334.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Effect of surface layer on the fatigue strength of additively manufactured 17-4 PH steel

    Leitner, M., Schneller, W., Springer, S. & Grün, F., 2020.

    Research output: Contribution to conference › Paper

  24. Published

    Numerical Fatigue Analysis of Induction-Hardened and Mechanically Post-Treated Steel Components

    Leitner, M., Aigner, R. & Grün, F., 2020, Advances in CAD/CAM/CAE Technologies. Multidisciplinary Digital Publishing Institute (MDPI)

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  25. 2019
  26. Published

    Areal fatigue strength assessment of cast aluminium surface layers

    Pomberger, S., Stoschka, M., Aigner, R., Leitner, M. & Ehart, R., 20 Dec 2019, In: International Journal of Fatigue. 133.2020, April, 11 p., 105423.

    Research output: Contribution to journal › Article › Research › peer-review

  27. E-pub ahead of print

    Fatigue crack growth in railway axle specimens – Transferability and model validation

    Simunek, D., Leitner, M., Rieger, M., Pippan, R., Gänser, H.-P. & Weber, F. J., 12 Dec 2019, (E-pub ahead of print) In: International Journal of Fatigue. 133.2020, 14 p., 105421.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Influencing factors on the fatigue strength of selectively laser melted structures

    Schneller, W., Leitner, M., Springer, S., Beter, F. & Grün, F., 20 Nov 2019.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Crack Initiation and Propagation Fatigue Life of Ultra High-Strength Steel Butt Joints

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 1 Nov 2019, In: Applied Sciences : open access journal. 9.2019, 21, 4590.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Effect of Post Treatment on the Microstructure, Surface Roughness and Residual Stress Regarding the Fatigue Strength of Selectively Laser Melted AlSi10Mg Structures

    Schneller, W., Leitner, M., Pomberger, S., Springer, S., Beter, F. & Grün, F., 16 Oct 2019, In: Journal of Manufacturing and Materials Processing. 3.2019, 4, 21 p., 89.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Notch Stress Intensity Factor (NSIF)-Based Fatigue Design to Assess Cast Steel Porosity and Related Artificially Generated Imperfections

    Schuscha, M., Horvath, M., Leitner, M. & Stoschka, M., 11 Oct 2019, In: Metals : open access journal . 9.2019, 10, 28 p., 1097.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Influence of surface roughness on additively manufactured aluminum components

    Springer, S., Schneller, W., Leitner, M. & Grün, F., 26 Sept 2019.

    Research output: Contribution to conference › Poster › Research

  33. Published

    Influence of surface roughness on additively manufactured aluminum components

    Springer, S., Schneller, W., Leitner, M. & Grün, F., 24 Sept 2019, 36th Danubia Adria Symposium on Advances in Experimental Mechanics: Extended Abstracts. Plzen, Czech Republic, p. 105-106

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    On the behaviour of non-propagating cracks in steel and aluminium castings

    Schuscha, M., Aigner, R., Pomberger, S., Oberreiter, M., Leitner, M. & Stoschka, M., 17 Sept 2019, In: Engineering Fracture Mechanics. 220.2019, 15 October, 106670.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Cast surface texture characterisation via areal roughness

    Pomberger, S., Stoschka, M. & Leitner, M., 12 Sept 2019, In: Precision Engineering. 60.2019, p. 465-481 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    On the mean stress sensitivity of cast aluminium considering imperfections

    Aigner, R., Leitner, M. & Stoschka, M., 5 Jun 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 758.2019, June, p. 172-184 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    On the Statistical Size Effect of Cast Aluminium

    Aigner, R., Pomberger, S., Leitner, M. & Stoschka, M., 14 May 2019, In: Materials. 12.2019, 10, 19 p., 1578.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Application of different simulation approaches to numerically optimize high-frequency mechanical impact (HFMI) post-treatment process

    Ernould, C., Schubnell, J., Farajian, M., Maciolek, A., Simunek, D., Leitner, M. & Stoschka, M., 1 May 2019, In: Welding in the world. 63.2019, 3, p. 725-738 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Analysis of fatigue notch effect due to axial misalignment for ultra high-strength steel butt joints

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., May 2019, In: Welding in the world. 63.2019, 3, p. 851-865 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Evaluation of surface roughness parameters and their impact on fatigue strength of Al-Si cast material

    Pomberger, S., Leitner, M. & Stoschka, M., May 2019, In: Materials Today: Proceedings. 12.2019, 2, p. 225-234 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Numerical crack growth study on porosity afflicted cast steel specimens

    Schuscha, M., Leitner, M., Stoschka, M., Pusterhofer, S. & Meneghetti, G., 1 Apr 2019, In: Frattura ed integrità strutturale. 13.2019, 48, p. 58-69 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Effects of High Frequency Mechanical Impact on Fatigue Life of Semi-Automated Gas Metal Arc Welding (GTAW) of HSLA Butt Weld

    Saidin, S., Andud, D., Manurung, Y., Faiz Mat, M., Nordin, N. & Leitner, M., 22 Feb 2019, In: MATEC Web of Conferences . 269.2019, 7 p., 06002.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Fatigue Life Enhancement of Transverse and Longitudinal T Joint on Offshore Steel Structure HSLAS460G2+M using Semiautomated GMAW and HFMI/PIT

    Andud, D., Faiz Mat, M., Manurung, Y., Saidin, S., Nordin, N., Muhammad, N. & Leitner, M., 22 Feb 2019, In: MATEC Web of Conferences . 269.2019, 6 p., 06001.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    A probabilistic Kitagawa-Takahashi diagram for fatigue strength assessment of cast aluminium alloys

    Aigner, R., Pusterhofer, S., Pomberger, S., Leitner, M. & Stoschka, M., 4 Feb 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 745.2019, February, p. 326-334 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Analytical and Numerical Crack Growth Analysis of 1:3 Scaled Railway Axle Specimens

    Simunek, D., Leitner, M., Maierhofer, J., Gänser, H.-P. & Pippan, R., 3 Feb 2019, In: Metals : open access journal . 9.2019, 2, p. 184 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Application of different simulation approaches to numerically optimize high-frequency mechanical impact (HFMI) post-treatment process

    Ernould, C., Schubnell, J., Farajian, M., Maciolek, A., Simunek, D., Leitner, M. & Stoschka, M., 1 Feb 2019, In: Welding in the world. 63.2019, 1 May, p. 725-738 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg

    Schneller, W., Leitner, M., Springer, S., Grün, F. & Taschauer, M., 1 Feb 2019, In: Journal of Manufacturing and Materials Processing. 3.2019, 1, 9 p., 16.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg

    Schneller, W., Leitner, M., Springer, S., Grün, F. & Taschauer, M., 1 Feb 2019, In: Journal of Manufacturing and Materials Processing. 3.2019, 1, 9 p., 16.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Retardation of Fatigue Crack Growth in Rotating Bending Specimens with Semi-Elliptical Cracks

    Leitner, M., Simunek, D., Maierhofer, J., Gänser, H.-P. & Pippan, R., 1 Jan 2019, In: Metals : open access journal . 9.2019, 2, 13 p., 156.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Analysis on Substrate Distortion Analysis Induced by Wire Arc Additive Manufacturing of SS316L using FEM Simulation with Simplified Meshing and Different Heat Source Models

    Faiz Mat, M., Manurung, Y., Muhammad, N., Nursyahirah Binti Ahmad , S., Helena Sipi Anak Pengadau , F., Prüller, S. & Leitner, M., 2019, 72nd IIW Annual Assembly and International Conference: Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Analytical and numerical simulation of fatigue crack propagation under constant amplitude loading on SENT specimen with experimental verification

    Olanrewaju Busari, Y., Manurung, Y., Ariri , A., Alva, S., Sebayang, D., Nordin, N. & Leitner, M., 2019, 72nd IIW Annual Assembly and International Conference: Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Auslegung thermomechanisch gefertigter Strukturen

    Grün, F. & Leitner, M., 2019, Proceedings zu Neue Technologien und Innvoationen in der Fahrzeugtechnik XVI. Steyr, p. 1 30 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Effect of surface condition on the fatigue strength of selectively laser melted metallic structures

    Leitner, M., Schneller, W., Springer, S., Beter, F. & Grün, F., 2019, 72nd IIW Annual Assembly and International Conference: IIW Document XIII-WG4-171-19.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 Next
View graph of relations

Latest Research Output

View more (204)