Martin Leitner

(Former)

1 - 100 out of 204Page size: 100

Research output

  1. 2021
  2. Published

    Effect of Surface Layer on the Fatigue Strength of Selectively Laser Melted 17-4 PH Steel

    Leitner, M., Schneller, W., Springer, S. & Grün, F., Jul 2021, In: Journal of Materials Engineering and Performance. 30, 7, p. 5383-5391 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Fatigue strength assessment of additively manufactured metallic structures considering bulk and surface layer characteristics

    Schneller, W., Leitner, M., Pomberger, S., Grün, F., Leuders, S., Pfeifer, T. & Jantschner, O., Apr 2021, In: Additive Manufacturing. 40.2021, April, 12 p., 101930.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Impact of microstructural properties on the crack threshold of aluminium castings

    Oberreiter, M., Aigner, R., Pomberger, S., Leitner, M. & Stoschka, M., Jan 2021, In: Engineering Fracture Mechanics. 241, 10 p., 107431.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    FEM Analysis of Fatigue Crack Growth in Low Carbon Steel Using Single Edge Notched Tension Specimen

    Busari, Y. O., Manurung, Y. H. P., Shuaib-Babata, Y. L., Leitner, M. & Celik, E., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 645-655 11 p. (Lecture Notes in Mechanical Engineering; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Grain Growth Prediction of SS316L Stainless Steel of Bead-On-Plate Using Numerical Computation

    Mat, M. F., Manurung, Y. H. P. M., Muhammad, N., Ahmad, S. N., Adenan, M. S. & Leitner, M., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 1-11 11 p. (Lecture Notes in Mechanical Engineering; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Investigation of Material Property Model on Substrate Deformation Induced by Thick-Walled WAAM Process Using Numerical Computation

    Ahmad, S. N., Manurung, Y. H. P., Mat, M. F. & Leitner, M., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 747-761 15 p. (Lecture Notes in Mechanical Engineering; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Numerical Simulation on Residual Stress and Substrate Deformation of Bead-On-Plate of SS316L Using Inherent Strain Method

    Ahmad, S. N., Manurung, Y. H. P., Taufek, T. & Leitner, M., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 723-738 16 p. (Lecture Notes in Mechanical Engineering; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. 2020
  10. E-pub ahead of print

    Fatigue strength estimation methodology of additively manufactured metallic bulk material

    Schneller, W., Leitner, M., Leuders, S., Sprauel, J. M., Grün, F., Pfeifer, T. & Jantschner, O., 4 Nov 2020, (E-pub ahead of print) In: Additive Manufacturing. 39.2021, March, 13 p., 101688.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Effect of load stress ratio on nominal and effective notch fatigue strength assessment of HFMI-treated high-strength steel cover plates

    Leitner, M. & Stoschka, M., 1 Oct 2020, In: International Journal of Fatigue. 139, October, 7 p., 105784.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Validation of the fatigue strength assessment of HFMI-treated steel joints under variable amplitude loading

    Leitner, M., Stoschka, M., Barsoum, Z. & Farajian, M., 23 Jun 2020, In: Welding in the world. 64.2020, 10, p. 1681-1689 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    FEM Simulation Procedure for Distortion and Residual Stress Analysis of Wire Arc Additive Manufacturing

    Nursyahirah Binti Ahmad , S., Manurung, Y., Mat, M. F., Minggu, Z., Jaffar, A., Prüller, S. & Leitner, M., 22 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 2020, 834, 11 p., 012083.

    Research output: Contribution to journal › Conference article › peer-review

  14. Published

    Grain Growth Prediction of Bead-on-Plate with Filler Wire SS316L using FEM

    Faiz Mat, M., Manurung, Y. H. P., Muhammad, N., Ditler, A., Syakir Abd Ghani, M. & Leitner, M., 22 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 2020, 834, 012009.

    Research output: Contribution to journal › Conference article › peer-review

  15. Published

    Prediction of Crack Propagation Rate and Stress Intensity Factor of Fatigue and Welded Specimen with a Two-Dimensional Finite Element Method

    Olanrewaju Busari, Y., Ariri , A., Manurung, Y., Sebayang, D., Leitner, M., Zaini, W. S. B. W., Kamilzukairi, M. A. B. M. & E. Celik, E., 22 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 2020, 834, 14 p., 012008.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Validation Study on the Statistical Size Effect in Cast Aluminium

    Oberreiter, M., Pomberger, S., Leitner, M. & Stoschka, M., 27 May 2020, In: Metals : open access journal . 10.2020, 6, p. 710 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Effect of increased yield strength, R-ratio, and plate thickness on the fatigue resistance of high-frequency mechanical impact (HFMI)–treated steel joints

    Leitner, M. & Barsoum, Z., 13 May 2020, In: Welding in the world. 64.2020, 7, p. 1245-1259 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Probabilistic Surface Layer Fatigue Strength Assessment of EN AC-46200 Sand Castings

    Pomberger, S., Oberreiter, M., Leitner, M., Stoschka, M. & Thuswaldner, J., 9 May 2020, In: Metals : open access journal . 10.2020, 5, p. 616 26 p., 616.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg

    Schneller, W., Leitner, M., Springer, S., Grün, F. & Taschauer, M., 1 Apr 2020, Selective Laser Melting: Materials and Applications. p. 4-12

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  20. Published

    Linear Elastic FE-Analysis of porous, laser welded, heat treatable, aluminium high pressure die castings based on X-ray computed tomography data

    Teichmann, F., Ziemer, A., Leitner, M., Hensel, J. & Dilger, K., 2 Mar 2020, In: Materials. 13, 6, 1420.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Fatigue crack growth model including load sequence effects – Model development and calibration for railway axle steels

    Maierhofer, J., Gänser, H. P., Simunek, D., Leitner, M., Pippan, R. & Luke, M., 1 Mar 2020, In: International Journal of Fatigue. 132.2020, March, 11 p., 105377.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Local strain energy density approach to assess the fatigue strength of sharp and blunt V-notches in cast steel

    Schuscha, M., Leitner, M., Stoschka, M. & Meneghetti, G., 1 Mar 2020, In: International Journal of Fatigue. 132.2020, March, 105334.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Effect of surface layer on the fatigue strength of additively manufactured 17-4 PH steel

    Leitner, M., Schneller, W., Springer, S. & Grün, F., 2020.

    Research output: Contribution to conference › Paper

  24. Published

    Numerical Fatigue Analysis of Induction-Hardened and Mechanically Post-Treated Steel Components

    Leitner, M., Aigner, R. & Grün, F., 2020, Advances in CAD/CAM/CAE Technologies. Multidisciplinary Digital Publishing Institute (MDPI)

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  25. 2019
  26. Published

    Areal fatigue strength assessment of cast aluminium surface layers

    Pomberger, S., Stoschka, M., Aigner, R., Leitner, M. & Ehart, R., 20 Dec 2019, In: International Journal of Fatigue. 133.2020, April, 11 p., 105423.

    Research output: Contribution to journal › Article › Research › peer-review

  27. E-pub ahead of print

    Fatigue crack growth in railway axle specimens – Transferability and model validation

    Simunek, D., Leitner, M., Rieger, M., Pippan, R., Gänser, H.-P. & Weber, F. J., 12 Dec 2019, (E-pub ahead of print) In: International Journal of Fatigue. 133.2020, 14 p., 105421.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Influencing factors on the fatigue strength of selectively laser melted structures

    Schneller, W., Leitner, M., Springer, S., Beter, F. & Grün, F., 20 Nov 2019.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Crack Initiation and Propagation Fatigue Life of Ultra High-Strength Steel Butt Joints

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 1 Nov 2019, In: Applied Sciences : open access journal. 9.2019, 21, 4590.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Effect of Post Treatment on the Microstructure, Surface Roughness and Residual Stress Regarding the Fatigue Strength of Selectively Laser Melted AlSi10Mg Structures

    Schneller, W., Leitner, M., Pomberger, S., Springer, S., Beter, F. & Grün, F., 16 Oct 2019, In: Journal of Manufacturing and Materials Processing. 3.2019, 4, 21 p., 89.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Notch Stress Intensity Factor (NSIF)-Based Fatigue Design to Assess Cast Steel Porosity and Related Artificially Generated Imperfections

    Schuscha, M., Horvath, M., Leitner, M. & Stoschka, M., 11 Oct 2019, In: Metals : open access journal . 9.2019, 10, 28 p., 1097.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Influence of surface roughness on additively manufactured aluminum components

    Springer, S., Schneller, W., Leitner, M. & Grün, F., 26 Sept 2019.

    Research output: Contribution to conference › Poster › Research

  33. Published

    Influence of surface roughness on additively manufactured aluminum components

    Springer, S., Schneller, W., Leitner, M. & Grün, F., 24 Sept 2019, 36th Danubia Adria Symposium on Advances in Experimental Mechanics: Extended Abstracts. Plzen, Czech Republic, p. 105-106

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    On the behaviour of non-propagating cracks in steel and aluminium castings

    Schuscha, M., Aigner, R., Pomberger, S., Oberreiter, M., Leitner, M. & Stoschka, M., 17 Sept 2019, In: Engineering Fracture Mechanics. 220.2019, 15 October, 106670.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Cast surface texture characterisation via areal roughness

    Pomberger, S., Stoschka, M. & Leitner, M., 12 Sept 2019, In: Precision Engineering. 60.2019, p. 465-481 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    On the mean stress sensitivity of cast aluminium considering imperfections

    Aigner, R., Leitner, M. & Stoschka, M., 5 Jun 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 758.2019, June, p. 172-184 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    On the Statistical Size Effect of Cast Aluminium

    Aigner, R., Pomberger, S., Leitner, M. & Stoschka, M., 14 May 2019, In: Materials. 12.2019, 10, 19 p., 1578.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Application of different simulation approaches to numerically optimize high-frequency mechanical impact (HFMI) post-treatment process

    Ernould, C., Schubnell, J., Farajian, M., Maciolek, A., Simunek, D., Leitner, M. & Stoschka, M., 1 May 2019, In: Welding in the world. 63.2019, 3, p. 725-738 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Analysis of fatigue notch effect due to axial misalignment for ultra high-strength steel butt joints

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., May 2019, In: Welding in the world. 63.2019, 3, p. 851-865 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Evaluation of surface roughness parameters and their impact on fatigue strength of Al-Si cast material

    Pomberger, S., Leitner, M. & Stoschka, M., May 2019, In: Materials Today: Proceedings. 12.2019, 2, p. 225-234 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Numerical crack growth study on porosity afflicted cast steel specimens

    Schuscha, M., Leitner, M., Stoschka, M., Pusterhofer, S. & Meneghetti, G., 1 Apr 2019, In: Frattura ed integrità strutturale. 13.2019, 48, p. 58-69 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Effects of High Frequency Mechanical Impact on Fatigue Life of Semi-Automated Gas Metal Arc Welding (GTAW) of HSLA Butt Weld

    Saidin, S., Andud, D., Manurung, Y., Faiz Mat, M., Nordin, N. & Leitner, M., 22 Feb 2019, In: MATEC Web of Conferences . 269.2019, 7 p., 06002.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Fatigue Life Enhancement of Transverse and Longitudinal T Joint on Offshore Steel Structure HSLAS460G2+M using Semiautomated GMAW and HFMI/PIT

    Andud, D., Faiz Mat, M., Manurung, Y., Saidin, S., Nordin, N., Muhammad, N. & Leitner, M., 22 Feb 2019, In: MATEC Web of Conferences . 269.2019, 6 p., 06001.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    A probabilistic Kitagawa-Takahashi diagram for fatigue strength assessment of cast aluminium alloys

    Aigner, R., Pusterhofer, S., Pomberger, S., Leitner, M. & Stoschka, M., 4 Feb 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 745.2019, February, p. 326-334 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Analytical and Numerical Crack Growth Analysis of 1:3 Scaled Railway Axle Specimens

    Simunek, D., Leitner, M., Maierhofer, J., Gänser, H.-P. & Pippan, R., 3 Feb 2019, In: Metals : open access journal . 9.2019, 2, p. 184 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Application of different simulation approaches to numerically optimize high-frequency mechanical impact (HFMI) post-treatment process

    Ernould, C., Schubnell, J., Farajian, M., Maciolek, A., Simunek, D., Leitner, M. & Stoschka, M., 1 Feb 2019, In: Welding in the world. 63.2019, 1 May, p. 725-738 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg

    Schneller, W., Leitner, M., Springer, S., Grün, F. & Taschauer, M., 1 Feb 2019, In: Journal of Manufacturing and Materials Processing. 3.2019, 1, 9 p., 16.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg

    Schneller, W., Leitner, M., Springer, S., Grün, F. & Taschauer, M., 1 Feb 2019, In: Journal of Manufacturing and Materials Processing. 3.2019, 1, 9 p., 16.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Retardation of Fatigue Crack Growth in Rotating Bending Specimens with Semi-Elliptical Cracks

    Leitner, M., Simunek, D., Maierhofer, J., Gänser, H.-P. & Pippan, R., 1 Jan 2019, In: Metals : open access journal . 9.2019, 2, 13 p., 156.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Analysis on Substrate Distortion Analysis Induced by Wire Arc Additive Manufacturing of SS316L using FEM Simulation with Simplified Meshing and Different Heat Source Models

    Faiz Mat, M., Manurung, Y., Muhammad, N., Nursyahirah Binti Ahmad , S., Helena Sipi Anak Pengadau , F., Prüller, S. & Leitner, M., 2019, 72nd IIW Annual Assembly and International Conference: Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Analytical and numerical simulation of fatigue crack propagation under constant amplitude loading on SENT specimen with experimental verification

    Olanrewaju Busari, Y., Manurung, Y., Ariri , A., Alva, S., Sebayang, D., Nordin, N. & Leitner, M., 2019, 72nd IIW Annual Assembly and International Conference: Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Auslegung thermomechanisch gefertigter Strukturen

    Grün, F. & Leitner, M., 2019, Proceedings zu Neue Technologien und Innvoationen in der Fahrzeugtechnik XVI. Steyr, p. 1 30 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Effect of surface condition on the fatigue strength of selectively laser melted metallic structures

    Leitner, M., Schneller, W., Springer, S., Beter, F. & Grün, F., 2019, 72nd IIW Annual Assembly and International Conference: IIW Document XIII-WG4-171-19.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Ermüdungsfestigkeitsbewertung geschweißter und HFMI-nachbehandelter Stahlstrukturen

    Leitner, M., 2019, DEUTLICH GÜNSTIGERE AUSLEGUNG SCHWINGEND BEANSPRUCHTER KONSTRUKTIONEN: Große Einsparpotenziale mit Bemessungsgrundlagen nach neuen HFMI-Richtlinien (IIW/DASt). Duisburg

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Evaluation of wood cutting forces in dry and wet conditions by small-scale hipping tests applying different analysis methods

    Pichler, P., Springer, S. & Leitner, M., 2019, In: Wood Material Science & Engineering . 14.2019, 3, p. 185-190 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Fatigue design of metallic components considering bulk and surface imperfections

    Leitner, M., Schneller, W., Pusterhofer, S. & Stoschka, M., 2019, Intermediate Meeting of IIW Commission XIII: IIW Document XIII-WG4-167-19.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Fatigue strength assessment of HFMI-treated steel joints under variable amplitude loading

    Leitner, M., Stoschka, M., Barsoum, Z. & Farajian, M., 2019, 72nd IIW Annual Assembly and International Conference: IIW Document XIII-2818-19.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Fatigue strength of welded joints and additively manufactured structures

    Grün, F. & Leitner, M., 2019, Proceedings International FEMFAT User Meeting 2019: Fatigue Analysis of Joint Connections.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    FEM Simulation Procedure for Distortion and Residual Stress Analysis of Wire Arc Additive Manufacturing

    Nursyahirah Binti Ahmad , S., Manurung, Y., Faiz Mat, M., Minggu, Z., Prüller, S. & Leitner, M., 2019, 6th International Conference on Advances in Mechanical Engineering 2019.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Grain growth prediction of bead-on-plate with filler wire SS316L using FEM

    Faiz Mat, M., Manurung, Y., Muhammad, N., Ditler, A., Syakir Abd Ghani, M. & Leitner, M., 2019, 6th International Conference on Advances in Mechanical Engineering 2019.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Influencing factors on the fatigue strength of selectively laser melted structures

    Schneller, W., Leitner, M., Springer, S., Beter, F. & Grün, F., 2019, Procedia Structural Integrity: Fatigue Design 2019, International Conference on Fatigue Design, 8th Edition. Vol. 19. p. 556 - 565 10 p. (Procedia Structural Integrity).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Numerical Fatigue Analysis of Induction-Hardened and Mechanically Post-Treated Steel Components

    Leitner, M., Aigner, R. & Grün, F., 2019, In: Machines : open access journal . 7.2019, 1, 1.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Short and long crack growth of aluminium cast alloys

    Leitner, M., Aigner, R., Pomberger, S., Stoschka, M., Garb, C. & Pusterhofer, S., 2019, Structural Integrity: Mechanical Fatigue of Metals. 7 ed. Springer, p. 139-145 7 p. (Structural Integrity; vol. 7).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  64. Published

    Structural FE-analysis of porous laser welded aluminium die castings based on X-ray computed tomography data

    Teichmann, F., Ziemer, A., Leitner, M., Hensel, J. & Dilger, K., 2019, 72nd IIW Annual Assembly and International Conference: IIW Document XIII-2791-19.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Technological aspects in fatigue design

    Leitner, M., 2019

    Research output: Thesis › Habilitation thesis › peer-review

  66. Published

    Thermal relaxation of residual stresses in Ti-6-4

    Stanojevic, A., Oberwinkler, B. & Leitner, M., 2019, The World Conference on Titanium (Ti-2019).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Transient Temperature and Substrate Distortion Analysis Induced by Wire Arc Additive Manufacturing of SS316L using Experiment and FEM with Simplified Bead Model

    Nursyahirah Binti Ahmad , S., Manurung, Y., Faiz Mat, M., Minggu, Z., Helena Sipi Anak Pengadau , F., Prüller, S. & Leitner, M., 2019, 72nd IIW Annual Assembly and International Conference: Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. 2018
  69. Published

    Application of a √ area -Approach for Fatigue Assessment of Cast Aluminum Alloys at Elevated Temperature

    Aigner, R., Garb, C., Leitner, M., Stoschka, M. & Grün, F., Dec 2018, In: Metals : open access journal . 8, 12

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Statistical analysis of micropore size distributions in Al–Si castings evaluated by X-ray computed tomography

    Garb, C., Leitner, M., Tauscher, M., Weidt, M. & Brunner, R., 1 Oct 2018, In: International Journal of Materials Research. 109, 10, p. 889-899 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Effect of as-cast surface layer on aluminium alloy fatigue strength

    Pomberger, S., Leitner, M. & Stoschka, M., 25 Sept 2018, 35th Danubia-Adria Symposium on Advances in Experimental Mechanics. Sinaia, Romania, p. 73-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Application of the generalized Kitagawa diagram on cast steel

    Schuscha, M., Leitner, M., Stoschka, M. & Meneghetti, G., 21 Sept 2018, Proceedings of the 6th International Conference on Crack Paths.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Short and Long Crack Growth of Aluminium Cast Alloys

    Leitner, M., Aigner, R., Pomberger, S., Stoschka, M., Garb, C. & Pusterhofer, S., 7 Sept 2018, Proceedings of the 19th International Colloquium on Mechanical Fatigue of Metals: Book of Abstracts. Porto, p. 25-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Fatigue and Fracture Behavior of Induction-Hardened and Superimposed Mechanically Post-treated Steel Surface Layers

    Leitner, M., Grün, F., Tuncali, Z. & Chen, W., Sept 2018, In: Journal of Materials Engineering and Performance. 27, 9, p. 4881-4892

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Surface topography effects on the fatigue strength of cast aluminum alloy AlSi8Cu3

    Leitner, M., Stoschka, M., Fröschl, J. & Wiebesiek, J., 14 Jun 2018, In: Materials Performance and Characterization. 7, 2, p. 148 - 164

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Application of modified Kitagawa-Takahashi diagram for fatigue strength assessment of cast Al-Si-Cu alloys

    Garb, C., Leitner, M., Stauder, B., Schnubel, D. & Grün, F., 1 Jun 2018, In: International Journal of Fatigue. 111, p. 256-268 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Development of a generalized Kitagawa diagram for cast G21Mn5 steel

    Schuscha, M., Leitner, M. & Stoschka, M., 25 May 2018, In: MATEC Web of Conferences . 2018, 165, 8 p., 14010.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Fatigue strength characterization of Al-Si cast material incorporating statistical size effect

    Aigner, R., Leitner, M. & Stoschka, M., 25 May 2018, In: MATEC Web of Conferences . 165, 14002.

    Research output: Contribution to journal › Conference article › peer-review

  79. Published

    Fatigue strength of welded and high frequency mechanical impact (HFMI) post-treated steel joints under constant and variable amplitude loading

    Leitner, M., Ottersböck, M., Pußwald, S. & Remes, H., 15 May 2018, In: Engineering Structures. 163, p. 215-223 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Fatigue strength assessment of welded mild steel joints containing bulk imperfections

    Leitner, M., Murakami, Y., Farajian, M., Remes, H. & Stoschka, M., 1 May 2018, In: Metals : open access journal . 8, 5, 306.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Impact of angular distortion on the fatigue performance of high-strength steel T-joints in as-welded and high frequency mechanical impact-treated condition

    Ottersböck, M. J., Leitner, M. & Stoschka, M., 1 May 2018, In: Metals : open access journal . 8, 5, 302.

    Research output: Contribution to journal › Article › Research › peer-review

  82. E-pub ahead of print

    Numerical fatigue assessment of welded and HFMI-treated joints by notch stress/strain and fracture mechanical approaches

    Leitner, M., Simunek, D., Shah, S. F. & Stoschka, M., 23 Feb 2018, (E-pub ahead of print) In: Advances in Engineering Software. 120.2018, June, p. 96-106 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Betriebsfestigkeitsbewertung gegossener Bauteile aus Aluminium und Stahl

    Aigner, R., Pomberger, S., Schuscha, M., Leitner, M. & Stoschka, M., 21 Feb 2018, In: Gießerei-Rundschau. 2018, 01, p. 7-13

    Research output: Contribution to journal › Article › Research

  84. Published

    Lifetime assessment of cast aluminium components based on CT-evaluated microstructural defects

    Aigner, R., Stoschka, M., Leitner, M., Schneller, W. & Thuswaldner, J., 6 Feb 2018. 1 p.

    Research output: Contribution to conference › Poster › Research

  85. Published

    Experimental determination of highly dynamic forces during wood trunk comminution with a drum chipper

    Pichler, P., Leitner, M., Grun, F. & Guster, C., 11 Jan 2018, In: Journal of Agricultural Engineering. p. 1-16 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Fatigue test results of surface hardened components to evaluate a two layer approach for strength assessment

    Dobberke, D., Wiebesiek, J., Fröschl, J. & Leitner, M., 1 Jan 2018, In: Procedia Engineering. 213, p. 262-269 8 p.

    Research output: Contribution to journal › Conference article › peer-review

  87. Published

    Local fatigue strength assessment of induction hardened components based on numerical manufacturing process simulation

    Leitner, M., Aigner, R. & Dobberke, D., 1 Jan 2018, In: Procedia Engineering. 213, p. 644-650 7 p.

    Research output: Contribution to journal › Conference article › peer-review

  88. Published

    Ein effizienter Ansatz zur numerischen Analyse von Bauteileigenspannungen durch Randschichthärtung

    Dobberke, D. & Leitner, M., Jan 2018, Numerische Simulation in der Betriebsfestigkeit.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Evaluation of wood material models for the numerical assessment of cutting forces in chipping processes

    Pichler, P., Leitner, M., Grün, F. & Guster, C., Jan 2018, In: Wood Science and Technology. 52, 1, p. 281-294 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Effect of increased yield strength, R-ratio, and plate thickness on the fatigue resistance of high frequency mechanical impact (HFMI)-treated steel joints

    Leitner, M. & Barsoum, Z., 2018, Proceedings of the 71st IIW International Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Effect of Tungsten Carbides on Abrasive Wear of Hardfacing Coatings

    Pichler, P., Leitner, M., Grün, F. & Haßler, J., 2018, In: Advances in tribology. 2018, 4047818.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Effects of High Frequency Impact on Fatigue Life of Manual Welding of HSLA Butt Weld

    Saidin, S., Faiz Mat, M., Manurung, Y., Andud, D., Nordin, N. & Leitner, M., 2018, Proceedings of the 71st IIW International Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Fatigue Life Enhancement of Transverse and Longitudinal T-Joint on Offshore Steel Structure HSLAS460G2+M using Semi-automated GMAW and HFMI/PIT

    Faiz Mat, M., Andud, D., Manurung, Y., Saidin, S., Nordin, N., Muhammad, N. & Leitner, M., 2018, Proceedings of the 71st IIW International Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Fatigue Strength Assessment of Welded Mild Steel Joints Containing Bulk Imperfections

    Leitner, M., Murakami, Y., Farajian, M., Remes, H. & Stoschka, M., 2018, International Institute of Welding: IIW-Document XIII-WG4-162-18.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    In-situ crack propagation measurement of high-strength steels including overload effects

    Simunek, D., Leitner, M. & Grün, F., 2018, In: Procedia Engineering. 213, p. 335-345 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Life extension of pre-fatigued friction stir welded AA6061 joints by high frequency mechanical impact (HFMI) treatment

    Ackiel Mohamed, M., Manurung, Y., Abdullah, M. K. & Leitner, M., 2018, Proceedings of the 71st IIW International Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Modification of a Defect-Based Fatigue Assessment Model for Al-Si-Cu Cast Alloys

    Aigner, R., Leitner, M., Stoschka, M., Hannesschläger, C., Wabro, T. & Ehart, R., 2018, In: Materials. 11, 12

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Residual Stress Assessment of HFMI-Treated Butt and T-Joint of 10mm HSLA Steel Using FEA and X-Ray Diffraction

    Nordin, N., Manurung, Y., Faiz Mat, M., Andud, D., Saidin, S. & Leitner, M., 2018, Proceedings of the 71st IIW International Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. 2017
  100. Published

    Effect of elevated temperature on the fatigue strength of casted AlSi8Cu3 aluminium alloys

    Garb, C., Leitner, M. & Grun, F., 12 Dec 2017, In: Procedia structural integrity / ESIS. 7.2017, p. 497-504 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    In-situ crack propagation measurement of high-strength steels including overload effects

    Simunek, D., Leitner, M. & Grun, F., 29 Nov 2017.

    Research output: Contribution to conference › Poster › Research

  102. Published

    Aufbau einer numerischen Simulationskette für induktionsgehärtete Randschichten

    Aigner, R., Stoschka, M. & Leitner, M., 6 Nov 2017, ESI Forum 2017 Konferenzband.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Statistical size effect on multiaxial fatigue strength of notched steel components

    Leitner, M., Vormwald, M. & Remes, H., 1 Nov 2017, In: International Journal of Fatigue. 104.2017, November, p. 322-333 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Numerical effects on notch fatigue strength assessment of non-welded and welded components

    Leitner, M., Pauer, P., Kainzinger, P. & Eichlseder, W., 15 Oct 2017, In: Computers and Structures. 191.2017, 15 October, p. 51-61 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  105. E-pub ahead of print

    Microporosity and statistical size effect on the fatigue strength of cast aluminium alloys EN AC-45500 and 46200

    Leitner, M., Garb, C., Remes, H. & Stoschka, M., 8 Sept 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 707.2017, 7 November, p. 567-575 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (204)