Markus J. Haager

(Former)

1 - 32 out of 32Page size: 50

Research output

  1. 2006
  2. Published

    Accelerated quality assurance tests for PE pipe grades

    Pinter, G., Haager, M. J. & Lang, R., 2006, ANTEC 2006. p. 2480-2484

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    A novel qualification concept for lifetime and safety assessment of PE pressure pipes for arbitrary installation conditions

    Lang, R., Pinter, G., Balika, W. & Haager, M. J., 2006, Plastics Pipes XIII. Plastics Pipes Conference Association, p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Bruchmechanische Methoden zur beschleunigten Charakterisierung des langsamen Risswachstums von Polyethylen-Rohrwerkstoffen

    Haager, M. J., 2006, 244 p.

    Research output: Thesis › Doctoral Thesis

  5. Published

    Ranking of PE pipe grades by cyclic crack growth tests with cracked round bar specimens

    Pinter, G., Haager, M. J. & Lang, R., 2006, ANTEC 2006. p. 2475-2479

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Ranking of polyethylene pipe materials using fatigue loading of cracked round bar specimens

    Haager, M. J., Pinter, G., Balika, W. & Lang, R., 2006, Plastics Pipes XIII. Plastics Pipes Conference Association, p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Ranking of Polyethylene pipe materials using fatigue loading of cracked round bar specimens

    Haager, M. J., Pinter, G., Balika, W. & Lang, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  8. Published

    Zugversuche an stumpfgeschweißten Polyethylenrohren nach EN 12814-2

    Haager, M. J. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. 2005
  10. Published

    Anwendung dere SIS/DSC-Methodik auf PE Werkstoffe

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    Brittle and ductile failure behavior of PE pipe grades

    Pinter, G., Major, Z., Haager, M. J. & Lang, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    Charakterisierung des Ermüdungsrisswachstums in PE mit CT Proben - Methodenentwicklung

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Charakterisierung des Impactverhaltens von PE-Methodenentwicklung

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    Ermüdungsrisswachstumsversuche an CT Proben aus PE bei 10 Hz

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  15. Published

    Fatigue crack growth in PE-HD pipe grades

    Pinter, G., Haager, M. J., Balika, W. & Lang, R., 2005, In: Plastics, rubber and composites. 34, p. 25-33

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Planung, Bau und Implementierung eines FNCT-Prüfstandes

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    Ranking of PE pipe grades by their failure behavior under impact loads

    Pinter, G., Major, Z., Haager, M. J. & Lang, R., 2005, ANTEC. p. 3551-3555

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Ranking von PE-Rohrwerkstoffen mittels Ermüdungsrisswachstum

    Hiesch, T. J., Haager, M. J., Pinter, G. & Lang, R., 2005, 10 Tagung Problemseminar: Deformation und Bruchverhalten von Kunststoffen. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Ranking von PE-Rohrwerkstoffen mittels Ermüdungsrisswachstum

    Hiesch, T. J., Haager, M. J., Pinter, G. & Lang, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Risswachstumsverhalten von PE-Rohrwerkstoffen

    Haager, M. J., Pinter, G., Balika, W. & Lang, R., 2005, 10 Tagung Problemseminar: Deformation und Bruchverhalten von Kunststoffen. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Statische Versuche an CT-Proben aus PE

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Studies of Creep and Fatigue Crack Growth in HD-PE-pipe materials

    Haager, M. J., Pinter, G., Lang, R. & Zhou, W., 2005, ANTEC. p. 3538-3542

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Zugversuche an Proben aus stumpfgeschweißten Polyethylenrohren nach EN 12814-2

    Haager, M. J. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. 2004
  25. Published

    Estimation of slow crack growth behavior in polyethylene after stepwise isothermal crystallization

    Haager, M., Pinter, G. & Lang, R. W., Oct 2004, In: Macromolecular Symposia. 217, p. 383-390 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Applicability and limitations of the FNCT-methodology to predict the long term failure behavior of polyethylene-pipe materials

    Haager, M., Pinter, G. & Lang, R. W., 2004, p. 4023-4027. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  27. Published

    Applicability and limitations of the FNCT-methodology to predict the long term failure behaviour of polyethylene pipe materials

    Haager, M. J., Pinter, G. & Lang, R., 2004, Society of Plastics Engineers. p. 4023-4027

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Beschleunigte Prüfmethoden zur Charakterisierung des Langzeitversagensverhaltens von thermoplastischen Rohrwerkstoffen

    Haager, M. J., Pinter, G. & Lang, R., 2004, Aktuelles aus Wissenschaft und Forschung - Kunststoffrohre 2004. Polymer Competence Center Leoben, Institut für Werkstoffkunde und -prüfung der Kunststoffe, p. VI-1-VI-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Ermüdungsrisswachstum in PE-Rohrwerkstoffen

    Haager, M. J., Pinter, G. & Lang, R., 2004, In: 3 R international. p. 492-496

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Estimation of slow crack growth behavior in Polyethylen after stepwise isothermal segregation

    Haager, M. J., Pinter, G. & Lang, R., 2004, In: Macromolecular Symposia. 217, p. 383-390

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Moderne Prüfmethoden für Polyethylen-Rohrwerkstoffe

    Haager, M. J., Pinter, G. & Lang, R., 2004, In: VLK-News. p. 2-3

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Ranking of PE-HD pipe grades by fatigue crack growth performance

    Pinter, G., Haager, M. J., Balika, W. & Lang, R., 2004, Plastics Pipes XII. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Thermo-oxidative degradation during creep crack growth of PE-HD grades as assessed by FT-IR spectroscopy

    Pinter, G., Haager, M. J., Wolf, C. & Lang, R., 2004, In: Macromolecular Symposia. 217, p. 307-316

    Research output: Contribution to journal › Article › Research › peer-review

  34. 2003
  35. Published

    Einsatz von statischen und zyklischen bruchmechanischen Methoden zur Charakterisierung von Polyethylen Rohrleitungswerkstoffen

    Haager, M. J., Pinter, G., Fanesi, E. & Lang, R., 2003, 6. Bregenzer Rohrleitungstage – Fachausstellung. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Estimation of slow crack growth behaviour in Polyethylene after stepwise isothermal segregation

    Haager, M. J., Pinter, G. & Lang, R., 2003.

    Research output: Contribution to conference › Poster › Research › peer-review

View graph of relations

Latest Research Output

View more (32)