Katharina Resch-Fauster

51 - 100 out of 141Page size: 50

Research output

  1. 2017
  2. Published

    Polymere Werkstoffe zur Steigerung der Ressourceneffizienz: Entwicklung, Charakterisierung und Anwendung

    Resch-Fauster, K., 2017

    Research output: Thesis › Habilitation thesis › peer-review

  3. Published

    Thermotropic overheating protection for façade-integrated solar thermal collectors

    Resch-Fauster, K., Weber, A., Holper, S. & Grobbauer, M., 2017, In: Solar energy materials and solar cells. 170.2017, October, p. 39-47 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2016
  5. Published

    Green Composites: Challenges to reach high performance components

    Lloret Pertegas, S., Anusic, A., Resch-Fauster, K. & Schledjewski, R., Jun 2016.

    Research output: Contribution to conference › Paper

  6. Published

    Neuartige Elastomerwerkstoffe auf Basis von Nanocompositen

    Ziegler, W., Rieß, G. (Co-editor), Winter, J. (Co-editor), Kopeinig, S. (Co-editor), Dietrich, M. (Co-editor), Resch-Fauster, K. (Co-editor), Kern, W. (Co-editor) & Pinter, G. (Co-editor), 14 Apr 2016, 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt: Schriftenreihe Kunststofftechnik Leoben. Pinter, G. & Pilz, G. (eds.). Leoben, Vol. 6. p. 209-210 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    High temperature phase change materials for the overheating protection if facade integrated solar thermal collectors, Energy and Buildings

    Hengstberger, F., Zauner, C., Resch-Fauster, K., Holper, S. & Grobbauer, M., 2016, In: Energy and Buildings. 124

    Research output: Contribution to journal › Article › Research › peer-review

  8. 2015
  9. Published

    Nanocomposite Hydrogels - Fracture Toughness and Energy Dissipation Mechanisms

    Klein, A., Whitten, P. G., Resch, K. & Pinter, G., 8 Oct 2015, In: Journal of polymer science : B, Polymer physics. 53, p. 1763 - 1773 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Heute schon an morgen denken

    Klein, A., Blees, E. C. & Resch, K., 7 Oct 2015, In: Recycling-Magazin. 19, p. 30 33 p.

    Research output: Contribution to journal › Article › Research

  11. Published

    Evaluation of Mechanical Recyclability of Technical Biopolymers

    Klein, A., Blees, E. C. & Resch, K., 8 Sept 2015, Book of Abstracts of the 8th International Symposium on Feedstock Recycling of Polymeric Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Measurement of interdiffusion in polymeric materials by applying Raman spectroscopy

    Bruckmoser, K., Resch, K., Kisslinger, T. & Lucyshyn, T., Sept 2015, In: Polymer Testing. 46, p. 122-133 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Effect of processing conditions on crystallization behavior and mechanical properties of poly(lactic acid) staple fibers

    Bruckmoser, K. & Resch, K., 20 May 2015, In: Journal of Applied Polymer Science. 132.2015, 33

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Nanocomposite Hydrogels - Towards Understanding Origins of Extraordinary high Fracture Toughness

    Klein, A., Whitten, P. G., Resch, K. & Pinter, G., 15 May 2015, Danube Vltava Sava Polymer Meeting - DVSPM 2015: Proceedings of a Conference on Polymer Science.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    New elastomers based on polyurethanes

    Ziegler, W., Winter, J. (Co-editor), Rieß, G., Kopeinig, S. (Co-editor), Dietrich, M. (Co-editor), Resch-Fauster, K. (Co-editor), Kern, W. (Co-editor) & Pinter, G. (Co-editor), 9 Mar 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    Rayleigh-Taylor Instability Analysis at Biobased Composite Interfaces

    Wool, R., Su, X. & Resch, K., 4 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  17. Published

    Bioplastics for Solar Thermal Applications: Potential of Bio-PE and PTT for Swimming Pool Solar Collectors

    Klein, A., Resch, K. & Oreski, G., 2015, ANTEC 2015: conference proceedings ; ... annual technical conference & exhibition . Brookfield , Vol. 2015. p. 200-204 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    POLYMER-PHYSICAL ANALYSIS OF UNUSUAL MORPHOLOGICAL EFFECTS IN NATURAL FIBRE COMPOSITES

    Resch, K., Su, X., Gong, S. & Wool, R., 2015, Proceedings of 20th International Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Potential and properties of soft polymeric composites produced from renewable resources

    Resch, K., Gong, S., Sauerbrunn, S. & Wool, R., 2015, Proceedings of Polymer Processing Society Conference (PPS) 2015, Graz, Austria.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. 2014
  21. Published

    Interface conditions of two-shot molded parts

    Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G., Resch, K. & Holzer, C., 15 May 2014, Proceedings of PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers. p. 170-174 (AIP conference proceedings; vol. 1593).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Biogene Kunststoffe für solartechnische Applikationen

    Klein, A. & Resch, K., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    Bioplastics for solar collector components

    Klein, A. & Resch, K., 2014, BiPoCo 2014 - Conference Programme.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Effect of processing conditions on mechanical properties and morphology of poly(lacitc acid) staple fibers

    Bruckmoser, K. & Resch, K., 2014,

    Programm & Abstract Booklet

    .     p. 19-19

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Experimental Confirmation of Diffusion Process in Multi-Component Injection Molding

    Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G., Holzer, C. & Resch, K., 2014, Proceedings of PPS 30. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Fracture Mechanical Characterization of Nanocomposite Hydrogels

    Klein, A., Whitten, P. G., Resch, K. & Pinter, G., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    Herstellung von PLA-Stapelfasern

    Bruckmoser, K. & Resch, K., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    Investigation of Ageing Mechanisms in Thermoplastic Polyurethanes by Means of IR and Raman Spectroscopy

    Bruckmoser, K. & Resch, K., 2014, In: Macromolecular Symposia. p. 70-83

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Observation of elastic modulus inhomogeneities in thermosetting epoxies using AFM e Discerning facts and artifacts

    Haba, D., Kaufmann, J., Brunner, A. J., Resch, K. & Teichert, C., 2014, In: Polymer. 55, p. 4032-4040

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Spektroskopische Charakterisierung von Alterungsmechanismen in thermoplastischen Polyurethanen

    Bruckmoser, K. & Resch, K., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Thermotropic glazings for overheating protection. II. Morphology and structure-property relationships

    Weber, A., Klein, A. & Resch, K., 2014, In: Journal of Applied Polymer Science. p. 39910-1-13

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Thermotropic glazings for overheating protection. I. Material preselection, formulation, and light-shielding efficiency

    Weber, A. & Resch, K., 2014, In: Journal of Applied Polymer Science. p. 39950-1-13

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Thermotropic Overheating Protection Glazings: Effect of Functional Additives and Processing Conditions on Light-Shielding Efficiency

    Weber, A. & Resch, K., 2014, In: Journal of Polymer Engineering. 34, p. 161-172

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Thermotropic systems with fixed domains exhibiting enhanced overheating protection performance

    Weber, A. & Resch, K., 2014, In: Journal of Applied Polymer Science. p. 40417-1-10

    Research output: Contribution to journal › Article › Research › peer-review

  35. 2013
  36. Published

    Comparative Spectroscopic Study of Aged Thermoplastic Polyurethanes

    Bruckmoser, K. & Resch, K., 2013, 19th European Symposium on Polymer Spectroscopy - ESOPS19. p. 41-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Effect of formulation and processing conditions on light shielding efficiency of thermotropic systems with fixed domains based on UV curing acrylate resins

    Weber, A., Schlögl, S. & Resch, K., 2013, In: Journal of Applied Polymer Science. 130, p. 3299-3310

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Evaluation of Raman Spectroscopy to Characterize Heat Ageing in Thermoplastic Polyurethanes

    Bruckmoser, K. & Resch, K., 2013, The Proceedings of The Austrian Slovenian Polymer Meeting 2013. p. 79-80

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Improvement of light shielding performance of thermotropic glazings by adaption of material composition and curing parameters

    Weber, A. & Resch, K., 2013, Proceedings of the Austrian-Slovenian Polymer Meeting 2013. p. 132-133

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Spectroscopic Characterization of Thermal Degradation in Thermoplastic Polyurethanes

    Bruckmoser, K. & Resch, K., 2013, ICSAAM 2013 Proceedings. p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Thermotropic Glazings: Theoretical and Practical Assessment of Overheating Protection Performance

    Weber, A., Gruber, D. & Resch, K., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Thermotropic overheating protection glazings

    Weber, A., Gruber, D. & Resch, K., 2013, Advances in Polymer Science and Technology 3: Proceedings of a Conference on Polymer Science.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. 2012
  44. Published

    Effect of heat ageing on the morphology of thermoplastic polyurethanes

    Bruckmoser, K. & Resch, K., 2012, 15th Intern. Conference P2012. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Effect of temperature-cycling on the morphology of polymeric thermotropic glazings for overheating protection applications

    Weber, A. & Resch, K., 2012, In: Journal of polymer research. 19, 6, p. 5-8

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Functional polymeric materials for solar thermal applications

    Resch, K., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Material- und Rissanalyse von Kunststoffkanülen aus LDPE

    Resch, K. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Optical and mechanical characterization of fluoropolymer films for pneumatic pre-stressed sun concentrators

    Hirschmann, B., Oreski, G., Resch, K. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    Plastics Market

    Resch, K. & Wallner, G. M., 2012, Polymeric Materials for Solar Thermal Applications. p. 129-134

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  50. Published

    Raman-spectroscopic investigations of polymer morphology

    Bruckmoser, K. & Resch, K., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Ramanspektroskopische Untersuchungen von Einschlüssen in PCTFE-Folien

    Bruckmoser, K., Pinter, G. & Resch, K., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. Published

    Temperature driven evolution of thermal, electrical, and optical properties of Ti-Al-N coatings

    Rachbauer, R., Gengler, J., Voevodin, A., Resch, K. & Mayrhofer, P. H., 2012, Proceedings of Acta Materialia. p. 2091-2096

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Temperature driven evolution of thermal, electrical, and optical properties of Ti-Al-N coatings

    Rachbauer, R., Gengler, J. J., Voevodin, A. A., Resch, K. & Mayrhofer, P. H., 2012, In: Acta materialia. 60, p. 2091-2096

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Thermotropic glazings for overheating protection

    Weber, A. & Resch, K., 2012, In: Energy Procedia. 30, p. 471-477

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Thermotropic Layers for Overheating Protection of all-Polymeric Flat Plate Solar Collectors

    Resch, K., Hausner, R., Wallner, G. M. & Lang, R., 2012, Polymeric Materials for Solar Thermal Applications. p. 255-265

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  56. 2011
  57. Published

    Ramanspektroskopische Untersuchungen von Rohroberflächen

    Bruckmoser, K., Pinter, G. & Resch, K., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1 2 3 Next
View graph of relations

Contact

Phone: 2105

Latest Research Output

View more (141)