Julia Maier

(Former)

1 - 42 out of 42Page size: 100

Research output

  1. 2017
  2. Published

    Fatigue Analysis of Continuously Carbon Fiber Reinforced Laminates

    Maier, J., Pinter, G. G., Gaier, C. & Fischmeister, S., 28 Mar 2017, In: SAE International Journal of Engines. 10.2017, 2, p. 305-315 11 p., 2017-01-0327.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2016
  4. Published

    Review on the suitability of stiffness and strength based concepts for the fatigue-life prediction of composites

    Maier, J., Pinter, G. & Schuecker, C., 30 Jun 2016.

    Research output: Contribution to conference › Abstract › peer-review

  5. Published

    SUITABILITY OF STIFFNESS AND STRENGTH BASED CONCEPTS FOR THE FATIGUE-LIFE PREDICTION OF COMPOSITES

    Pinter, G., Maier, J., Wolfahrt, M. & Schuecker, C., 30 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  6. Published

    SUITABILITY OF STIFFNESS AND STRENGTH BASED CONCEPTS FOR THE FATIGUE-LIFE PREDICTION OF COMPOSITES

    Pinter, G., Maier, J., Wolfahrt, M. & Schuecker, C., 30 Jun 2016, Proceedings of the 17th European Conference on Composite Materials. 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. 2015
  8. Published

    Stiffness and strength based modelsfor the fatigue-life predictionof continuously fiber reinforced composites

    Pinter, G. & Maier, J., 1 Jul 2015.

    Research output: Contribution to conference › Presentation › Research

  9. Published

    Computational fatigue life prediction of continuously fibre reinforced multiaxial composites

    Maier (Brunbauer), J., Gaier, C. & Pinter, G., 20 Jun 2015, In: Composites Part B: Engineering. 80.2015, October, p. 269-277 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Lightweight Design with Fibre Reinforced Polymers: Optimized and Reliable Components via Flexible Material Architecture

    Pinter, G. & Maier, J., 10 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  11. Published

    Material Modelling for Fatigue Life Calculation of Short Fibre Reinforced Injection Moulded Parts with FEMFAT

    Mösenbacher, A., Primetzhofer, A., Pichler, P., Koblmiller, T., Maier, J. & Pinter, G., 10 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  12. Published

    Material Modelling for Fatigue Life Calculation of Short Fibre Reinforced Injection Moulded Parts with FEMFAT

    Mösenbacher, A., Primetzhofer, A., Pichler, P., Koblmiller, T., Maier, J. & Pinter, G., 10 Jun 2015, 10th International FEMFAT User Meeting 2015 HANDOUT: Ligthweight Design and New Materials. Steyr, 28 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Material fatigue models and design methodology for short fibre reinforced polymers based on damage accumulation hypothesis

    Pinter, G., Mösenbacher, A., Maier, J., Primetzhofer, A. & Guster, C., 31 Mar 2015, Proceedings 16th International Conference on Deformation Yield and Fracture of Polymers.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. E-pub ahead of print

    Effects of mean stress and fibre volume content on the fatigue-induced damage mechanisms in CFRP

    Maier, J. & Pinter, G., 7 Feb 2015, (E-pub ahead of print) In: International Journal of Fatigue. 75.2015, June, p. 28-38 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Fatigue-induced damage mechanisms in carbon/epoxy laminates influenced by mean stress and fibre volume content

    Maier, J. & Pinter, G., 2015.

    Research output: Contribution to conference › Presentation › Research

  16. Published

    Fatigue-induced damage mechanisms in carbon/epoxy laminates influenced by mean stress and fibre volume content

    Maier, J. & Pinter, G., 2015, ICCM20 - 20th International Conference on Composite Materials Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Fatigue of continuously fibre reinforced composites - Engineering approaches to fatigue-life prediction

    Brunbauer, J., 2015

    Research output: Thesis › Doctoral Thesis

  18. Published

    Software-basierte Methode zur Lebensdauerabschätzung endlosfaserverstärkter Kunststoffe

    Maier, J., Gaier, C., Stelzer, S. & Pinter, G., 2015.

    Research output: Contribution to conference › Presentation › Research

  19. Published

    Stiffness and strength based models for the fatigue-life prediction of continuously fiber reinforced composites

    Maier, J. & Pinter, G., 2015, In: Advanced materials research. 825-826, p. 960-967

    Research output: Contribution to journal › Article › Research › peer-review

  20. 2014
  21. Published

    Erweiterung der klassischen Laminattheorie zur Berechnung ermüdungsinduzierter Steifigkeitsabfälle in CFK

    Brunbauer, J., Pinter, G. & Wolfahrt, M., 2014, Schriftenreihe Kunststofftechnik Leoben Band 4. p. 53-57

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Erweiterung der klassischen Laminattheorie zur Berechnung ermüdungsinduzierter Steifigkeitsabfälle in CFK

    Maier, J., Wolfahrt, M. & Pinter, G., 2014.

    Research output: Contribution to conference › Presentation › Research

  23. Published

    Fatigue behaviour of continuously carbon fibre reinforced plastics

    Brunbauer, J., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Fatigue design methodology of reinforced engineering thermoplastics

    Maier, J., Mösenbacher, A. & Pinter, G., 2014.

    Research output: Contribution to conference › Presentation › Research

  25. Published

    Fatigue life prediction of carbon fibre reinforced laminates by using cycle-dependent classical laminate theory

    Brunbauer, J. & Pinter, G., 2014, In: Composites / B. p. 167-174

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Fundamental Influences on Quasistatic and Cyclic Material Behavior of Short Glass Fiber Reinforced Polyamide Illustrated on Microscopic Scale

    Brunbauer, J., Pinter, G., Mösenbacher, A. & Guster, C., 2014, In: Journal of Applied Polymer Science. 131, p. 1-14

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Mechanical properties, fatigue damage and microstructure of carbon/epoxy laminates depending on fibre volume content

    Brunbauer, J., Pinter, G. & Stadler, H., 2014, In: International Journal of Fatigue. 70, p. 85-92

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Modelling and Validation of Fatigue Life Calculation Method for Short Fibre Reinforced Injection Moulded Parts

    Mösenbacher, A., Pichler, P., Guster, C., Pinter, G. & Maier, J., 2014, Proceedings of 16th Conference on Composite Materials. Sevilla

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    On the strain measurement and stiffness calculation of carbon fibre reinforced composites under quasi-static tensile and tension-tension fatigue loads

    Brunbauer, J. & Pinter, G., 2014, In: Polymer Testing. 40, p. 256-264

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Stiffness based fatigue characterisation of CFRP

    Brunbauer, J., Arbeiter, F., Stelzer, S. & Pinter, G., 2014, In: Advanced materials research. p. 166-171

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Stiffness based fatigue characterisation of CFRP

    Maier, J., Arbeiter, F., Stelzer, S. & Pinter, G., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  32. Published

    Technological approach to fatigue life prediction of CFRP

    Brunbauer, J. & Pinter, G., 2014, Eccm-16th European Conference on Composite Materials. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Technological approach to fatigue life prediction of CFRP

    Maier, J. & Pinter, G., 2014.

    Research output: Contribution to conference › Presentation › Research

  34. 2013
  35. Published

    Concept for characterisation of fatigue damage and failure of laminated composites by cycle-and stress-dependent stiffness properties

    Maier, J. & Pinter, G., 2013.

    Research output: Contribution to conference › Presentation › Research

  36. Published

    Concept for evaluating stiffness degradation of composite materials during fatigue life

    Maier, J. & Pinter, G., 2013.

    Research output: Contribution to conference › Presentation › Research

  37. Published

    Fatigue Life Calculation of Short Fibre Reinforced Thermoplastic Parts

    Mösenbacher, A., Pichler, P., Brunbauer, J., Guster, C. & Pinter, G., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Lebensdauerabschätzung von kohlenstofffaserverstärkten Laminaten auf Basis zyklenabhängiger Steifigkeiten

    Brunbauer, J. & Pinter, G., 2013, DVM-Bericht 140. p. 49-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Lebensdauerabschätzung von kohlenstofffaserverstärkten Laminaten auf Basis zyklenabhängiger Steifigkeiten

    Maier, J. & Pinter, G., 2013.

    Research output: Contribution to conference › Presentation › Research

  40. Published

    Lebensdauerberechnung an Strukturbauteilen aus kurzfaserverstärkten Thermoplasten

    Mösenbacher, A., Pichler, P., Guster, C., Brunbauer, J. & Pinter, G., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    Lebensdauerberechnung an Strukturbauteilen aus kurzfaserverstärkten Thermoplasten

    Mösenbacher, A., Pichler, P., Guster, C., Brunbauer, J. & Pinter, G., 2013, Die Betriebsfestigkeit als eine Schlüsselfunktion der Zukunft. p. 301-316

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Non-destructive on-line damage monitoring in composites under fatigue loading

    Maier, J. & Pinter, G., 2013.

    Research output: Contribution to conference › Presentation › Research

  43. Published

    Simulating the Fatigue Life of Fiber-Reinforced Injection Moldings

    Guster, C., Friesenbichler, W., Gröger, T., Mösenbacher, A. & Brunbauer, J., 2013, In: Kunststoffe <München> / Kunststoffe international. p. 92-94

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Simulation der Lebensdauer faserverstärkter Spritzgussteile

    Guster, C., Friesenbichler, W., Gröger, T., Mösenbacher, A. & Brunbauer, J., 2013, In: Kunststoffe. p. 158-161

    Research output: Contribution to journal › Article › Research › peer-review

  45. 2011
  46. Published

    E-Muffen aus PE 100-RC bieten neue Möglichkeiten

    Haager, M., Brunbauer, J. & Carbon, R., 2011, In: Joining plastics=Fügen von Kunststoffen. 5, 3, p. 190-196

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Heizwendelschweißmuffen aus PE 100-RC Optimiertes Langzeitverhalten durch verbesserte Werkstoffe

    Haager, M., Brunbauer, J. & Carbon, R., 2011, In: 3 R. 4/5, p. 308-313

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Influence of the beadless welding technology on the properties of PP-R and PVDF joints

    Brunbauer, J., 2011, 104 p.

    Research output: Thesis › Master's Thesis

View graph of relations

Latest Research Output

View more (42)