Jiehua LI

101 - 161 out of 161Page size: 100

Research output

  1. 2016
  2. Published

    Grain refinement of hypoeutectic Al-Si alloys with B

    Chen, Z., Kang, H., Fan, G., Li, J., Lu, Y., Jie, J., Zhang, Y., Li, T., Jian, X. & Wang, T., 2016, In: Acta materialia. 120, p. 168 178 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Investigation of heterogeneous nucleation interface of TiB2 in Al alloys by atomic STEM-HAADF and EELS

    Li, J., Hage, F., Ramasse, Q. & Schumacher, P., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  4. Published

    Microstructure and mechanical properties of a nanocrystalline AlNbTiV high-entropy alloy

    Schuh, B., Völker, B., Li, J., Maier, V., Pippan, R. & Hohenwarter, A., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  5. Published

    Microstructure Evolution and Mechanical Properties of directionally solidified Mg-xGd (x¼0.8, 1.5,and2.5)alloys

    Luo, S., Yang, G., Liu, S., Wang, J., Li, J. & Jie, W., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 662, p. 241-250 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Precipitation hardening of an Mg-5Zn-2Gd-0.4Zr (wt. %) alloy

    Li, J., Barrirero, J., Sha, G., Aboulfadl, H., Mücklich, F. & Schumacher, P., 2016, In: Acta materialia. 108, p. 207-218 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Revealing heterogeneous nucleation of primary Si and eutectic Si by AlP in hypereutectic Al-Si alloys

    Li, J., Hage, F. S., Liu, X., Ramasse, Q. & Schumacher, P., 2016, In: Scientific reports (London : Nature Publishing Group). 6, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    The bulk and interfacial structures of the η (Al2Au) precipitate phase

    Bourgeois, L., Zhang, Z., Li, J. & Medhekar, N., 2016, In: Acta materialia. 105.2016, 15 February, p. 284-293 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. 2015
  10. Published

    Atomistic characaterization on the solute clustering and precipitation of Mg alloys

    Schumacher, P. & Li, J., 23 Sept 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  11. Published

    The roles of Eu during the growth of eutectic Si in Al-Si alloys

    Li, J., Hage, F., Wiessner, M., Romaner, L., Scheiber, D., Sartory, B., Ramasse, Q. & Schumacher, P., 2 Sept 2015, In: Scientific reports (London : Nature Publishing Group). 5, 13802 , p. 1-10 10 p., Scientific Reports | 5:13802 | DOI: 10.1038/srep13802.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Modification of eutectic Si in Al-Si alloys with Eu addition

    Li, J. H., Wang, X. D., Ludwig, T. H., Tsunekawa, Y., Arnberg, L., Jiang, J. Z. & Schumacher, P., 1 Feb 2015, In: Acta materialia. 84, p. 153-163 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Nucleation and Growth of Eutectic Si in Al-Si Alloys with Na Addition

    Li, J., BARRIRERO, J., ENGSTLER, M., ABOULFADL, H., MüCKLICH, F. & Schumacher, P., 2015, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science .

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Solute adsorption and entrapment during eutectic Si growth in Al-Si-based alloys

    Li, J., Albu, M., Hofer, F. & schumacher, P., 2015, In: Acta materialia. 83, p. 187-202

    Research output: Contribution to journal › Article › Research › peer-review

  15. 2014
  16. Published

    Influence of dendritic morphology on the calculation of macrosegregation in steel ingot

    Li, J., Wu, M. H., Ludwig, A., Kharicha, A. & Schumacher, P., 1 Jan 2014, Solidification and Gravity VI. Trans Tech Publications, p. 121-126 6 p. (Materials Science Forum; vol. 790-791).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Atomic observation on the solute adsorption and entrainment during Si growth in Al-Si based alloys

    Li, J., Albu, M., Hofer, F. & Schumacher, P., 2014, Fortschritte in der Metallographie . Werkstoff-Informationsges., p. 379-384 (Sonderbände der praktischen Metallographie; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  18. Published

    Impurity effects on the nucleation and growth of primary Al3(Sc,Zr) phase in Al alloys

    Li, J., Oberdorfer, B., Wurster, S. & Schumacher, P., 2014, In: Journal of materials science. 49, p. 5961-5977

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Influence of dendritic morphology on the calculation of macrosegregation in steel ingot

    Li, J., Wu, M., Ludwig, A., Kharicha, A. & Schumacher, P., 2014, Materials Science Forum Vols. 790-791. p. 121-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Intermetallic phase selection during homogenisation for AA6082 alloy

    Li, J., Wimmer, A. C., Dehm, G. & Schumacher, P., 2014, In: Philosophical magazine. p. 830-846

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Modification of eutectic Si in Al-Si based alloys

    Li, J., Albu, M., Ludwig, T. H., Matsubara, Y., Arnberg, L., Tsunekawa, Y. & Schumacher, P., 2014, Materials Science Forum. Vol. 794-796.2014. p. 130-136 7 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  22. Published

    Nanoscale voxel spectroscopy by simultaneous EELS and EDS tomography

    Haberfehlner, G., Orthacker, A., Albu, M., Li, J. & Kothleitner, G., 2014, In: Nanoscale. 6, p. 14563-14569

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Nucleation Kinetics of Entrained Eutectic Si in Al-5Si Alloys

    Li, J., Zarif, M. Z., Albu, M., McKay, B., Hofer, F. & Schumacher, P., 2014, In: Acta materialia. 72, p. 80-98

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Refinement of eutectic Si in high purity Al-5Si alloys with combined Ca and P additions

    Ludwig, T., Li, J., Schaffer, P., Schumacher, P. & Arnberg, L., 2014, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 46, p. 362-376

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Revealing the precipitation in Al-Cu based alloys with Sc addition

    Li, J., Albu, M., Hofer, F. & Schumacher, P., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    Revealing the precipitation of Al-alloys subjected to high pressure torsion

    Li, J., Renk, O., Kutleša, P., Zhang, Z., Pippan, R. & Schumacher, P., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    Solidification microstructure control of Al alloys

    LI, J., 2014

    Research output: Thesis › Habilitation thesis › peer-review

  28. Published

    Thermodynamics-based computational Approach to Al-Cu Alloys: Grain Refinement

    Li, J., Promer, C., Jahn, A., Oberdorfer, B., Wurster, S., Martin, F. & Schumacher, P., 2014, Shape Casting: 5th International Symposium 2014. p. 77-87

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. 2013
  30. Published

    Prediction of the as-cast structure of Al-4.0 Wt Pct Cu ingots

    Ahmadein, M., Wu, M., Li, J. H., Schumacher, P. & Ludwig, A., 1 Jun 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, 6, p. 2895-2903 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Atomic observation of SR in high purity melt spun Al-5wt%Si based Alloys

    Li, J. & Schumacher, P., 2013, Atomic Observation of SR in high purity melt spun Al-5wt%Si based Alloys. p. 509-512

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Effects of Yb Additions on Refinement of Eutectic Si in Al-5Si Alloys

    Li, J. & Schumacher, P., 2013, Effects of Yb Additions on Refinement of Eutectic Si in Al-5Si Alloys. p. 1017-1022

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Effects of Yb Additions on Refinement of Eutectic Si in Al-5Si Alloys

    Li, J. & Schumacher, P., 2013, Light Metals 2013. p. 1017-1022

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  34. Published

    Refinement of Eutectic Si Phase in Al-5Si Alloys with Yb Additions

    Li, J., SUETSUGU, S., TSUNEKAWA, Y. & Schumacher, P., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, p. 669-681

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Tailoring Precipitates in Mg-6Zn-2Gd based Alloy subjected to high pressure torsion

    Li, J. & Schumacher, P., 2013, Tailoring Precipitates in Mg-6Zn-2Gd based alloy subjected to high pressure torsion. p. 351-356

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Tailoring Precipitates in Mg-6Zn-2Gd based Alloy Subjected to High Pressure Torsion

    Li, J. & Schumacher, P., 2013, Magnesium Technology 2013. p. 351-356

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  37. 2012
  38. Published

    Effect of Y addition and cooling rate on refinement of eutectic Si in Al–5 wt-%Si alloys

    Li, J. & Schumacher, P., 2012, In: International journal of cast metals research. 25, p. 347-357

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Influence of impurity elements on the nucleation and growth of Si in high purity melt-spun Al–Si-based alloys

    Li, J., Zarif, M. Z., Dehm, G. & Schumacher, P., 2012, In: Philosophical magazine. 92, p. 3789-3805

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Modification of Al-Si alloys

    Li, J., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    Phase Selection in 6082 Al-Mg-Si Alloys

    Wimmer, A. C., Li, J. & Schumacher, P., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. p. 301-305

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Precipitation microstructure and age-hardening response of an Mg-Gd-Nd-Zn-Zr alloy

    Li, J., Sha, G., Wang, T., Jie, W. & Ringer, S., 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 534, p. 1-6

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Precipitation microstructure and their strengthening effects of an Mg-2.8Nd-0.6Zn-0.4Zr alloy with a 0.2 wt. % Y addition

    Li, J., Sha, G., Jie, W. & Ringer, S., 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 538, p. 272-280

    Research output: Contribution to journal › Article › Research › peer-review

  44. 2011
  45. Published

    Evaluation of a mixed columnar-equiaxed solidification model with laboratory castings

    Wu, M., Nunner, G., Ludwig, A., Li, J. & Schumacher, P., 2011, IOP Conf. Series: Mater. Sci. Eng., vol. 27. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    PRECIPITATION PROCESS IN Mg-Nd-Zn-Zr-Gd/Y ALLOY

    Li, J., Sha, G., Schumacher, P. & Ringer, S., 2011, Magnesium Technology 2011. p. 255-259

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Solidification and age hardening behaviour of Mg-Zn-Gd Alloys

    Li, J. & Schumacher, P., 2011, IOP Conf. Series: Materials Science and Engineering. p. 012021-012027

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. 2010
  49. Published

    Hardening and microstructure reactions in high-temperature Equal-Channel Angular Pressed Mg-Nd-Gd-Zn-Zr alloy

    Li, J., Sha, G., Xu, W., Xia, K., Jie, W. & Simon, R., 2010, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, p. 5092-5099

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Study of the effect of Strontium (Sr) on the nucleation of eutectic Silicon (Si) in high purity hypoeutectic Al-5Si alloys

    Li, J., Zarif, M. Z. & Schumacher, P., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 506-511

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Study on Mechanical Properties and Microstructures of Mg-6Zn-2Gd-0.6Zr New Sand-Casting Magnesium Alloy

    Yang, G., Li, J., Jie, W. & Yu, Z., 2010, Materials Science Forum.. p. 651-654

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    TEM and APT characterization of solute clustering and precipitation process in a novel Mg-Nd-Gd-Zn-Zr alloy

    Li, J., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  53. Published

    TEM investigation of a novel Fe containing phase in high purity Al-Si-Fe alloys

    Zarif, M. Z., McKay, B., Li, J. & Schumacher, P., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 499-505

    Research output: Contribution to journal › Article › Research › peer-review

  54. 2009
  55. Published

    Higher strength magnesium alloy and processing

    Yang, G. (Inventor), Li, J. (Inventor), Jie, W. (Inventor), Yu, Z. (Inventor) & Zhang, R. (Inventor), 10 Jul 2009, Patent No. 200910023290.0

    Research output: Patent

  56. Published

    Casting magnesium alloy and processing

    Yang, G. (Inventor), Li, J. (Inventor), Jie, W. (Inventor), Yu, Z. (Inventor) & Cao, L. (Inventor), 9 Mar 2009, Patent No. 200910021445.7

    Research output: Patent

  57. Published

    Atom Probe Tomography Characterization of Early-stage Precipitates in an Mg-Gd-Nd-Zn Alloy

    Sha, G., Li, J., Jie, W. & Ringer, S., 2009, Magnesium Alloys and their Application. p. 40-45

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. 2008
  59. Published

    Characterization of Nano-precipitates in Mg-2.8Nd-0.6Gd-0.2Zn-0.4Zr (wt %) Alloy

    Li, J., Sha, G., Wang, T., Jie, W. & Ringer, S., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  60. Published

    Characterization of Nano-precipitates in Mg-6Zn-2Cu-0.4Mn (wt %) Alloy

    Li, J., Sha, G., Jie, W. & Ringer, S., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  61. Published

    Effect of gadolinium on the aging hardening behaviour, solidification microstructure and mechanical properties of Mg-Nd-Zn-Zr cast magnesium alloys

    Li, J., Jie, W. & Yang, G., 2008, In: Transactions of Nonferrous Metals Society of China. 18, p. 27-32

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Microstructural evolution of Mg-6Zn-1.5Gd-0.4Zr alloy by semi-solid isothermal heat treatment

    Cao, L., Hao, Q. T., Yang, G. Y. & LI, J., 2008, In: Zhuzao = Foundry. 3

    Research output: Contribution to journal › Article › Research › peer-review

  63. 2007

  64. Develop the degassing and purification equipment of molten aluminum alloys by rotary impeller

    LI, J. & Hao, Q. T., Jul 2007, In: Zhuzao = Foundry. 56.2007, 7, p. 731-734 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Investigation of properties and microstructures of Mg-Al-Cu sand-cast magnesium alloys

    Hao, Q., Yang, G., Jie, W., He, Z. & LI, J., Apr 2007, In: Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering. 36, 4, p. 671-675 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Simulation of degassing and purification process of molten aluminum alloys by rotary impeller

    Li, J., Hao, Q. & Yang, G., Feb 2007, In: Tezhong-zhuzao-ji-youse-hejin = Special casting and nonferrous alloys. 27, 2, p. 100-103 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Behavior of microstructure evolution of ZL205A cast aluminium alloy by semi-solid isothermal annealing process

    Yang, G., Jie, W. Q., Zhang, R. Q., Hao, Q. T. & LI, J., 2007, In: Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering. 2007, 10, p. 1717-1721 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Simulation and research of degassing and purification process of molten aluminium alloys by rotary impeller: Special Casting and Nonferrous alloys

    Li, J., Yang, G. & Qitang, H., 2007

    Research output: Non-textual form › Web publication/site › Transfer

  69. Published

    Study on the Process of Magnesium Alloys Investment Casting

    Yang, G., Jie, W., Qitang, H. & Li, J., 2007, Materials Science Forum.. p. 1019-1021

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. 2005
  71. Published

    Research of Counter-gravity Casting Fluid Surface Forcing Control System

    Li, J. & Qitang, H., 2005, Special Casting and Nonferrous alloys. 2005, Die Casting Special. p. 133-134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    The Purification Technology of Molten Aluminum alloys

    Li, J. & Qitang, H., 2005, Special Casting and Nonferrous alloys. 2005, Die Casting Special. p. 32-35

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 Next
View graph of relations

Contact

Phone: 3304

Latest Research Output

View more (161)