Helmut Clemens

(Former)

121 - 140 out of 626Page size: 20

Research output

  1. 2018
  2. Published

    Mikrostrukturelle Charakterisierung einer pulvermetallurgisch hergestellten mehrphasigen TiAl-Legierung

    Burtscher, M., Pürstl, F., Schloffer, M., Mayer, S. & Clemens, H., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 151-156

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Mikrostrukturelle Charakterisierung von Molybdän- Korngrenzen mittels Mikrosäulen-Druckversuchen und Atomsondenuntersuchungen

    Jakob, S., Lorich, A., Eidenberger-Schober, M., Knabl, W., Clemens, H. & Maier-Kiener, V., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 171-176

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Multi-Scale Microstructural Characterization: The Role of Classic and High-Resolution Metallography in the Developement of Modern High-Performance Materials

    Schnitzer, R., Hofer, C., Mayer, S., Panzenböck, M., Holec, D. & Clemens, H., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 9, p. 584-602 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Skalenübergreifende Gefügechatakterisierung - Die Rolle der klassischen und hochauflösenden Metallographie bei der Entwicklung moderner Hochleistungswerkstoffe

    Schnitzer, R., Hofer, C., Mayer, S., Panzenböck, M., Holec, D. & Clemens, H., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 23-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Strain-induced martensitic transformation in a Co-Cr-W-Mo alloy probed by nanoindentation

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 2018, Proceedings of the International Conference on Martensitic Transformations. p. 247-250

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Synchrotron X-rays in the development of multi-phase intermetallic TiAl alloys

    Erdely, P., Staron, P., Stark, A., Maawad, E., Schell, N., Clemens, H. & Mayer, S., 2018.

    Research output: Contribution to conference › Poster › Research

  8. Published

    Wie die Mikrostruktur von Hochleistungswerkstoffen deren mechanische Eigenschaften beeinflusst - eine skalenübergreifende Studie

    Maier-Kiener, V., Siller, M., Jakob, S., Leitner, K., Clemens, H., Lorich, A., Lang, D., Schatte, J., Eidenberger-Schober, M. & Knabl, W., 2018, Fortschritte in der Metallographie : Sonderbände der Praktischen Metallographie. 1 ed. DGM, Vol. 52. p. 3-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. 2017
  10. Published

    Complementary High Spatial Resolution Methods in Materials Science and Engineering

    Paris, O., Lang, D., LI, J., Schumacher, P., Deluca, M., Daniel, R., Tkadletz, M., Schalk, N., Mitterer, C., Todt, J., Keckes, J., Zhang, Z., Popovski, G., Ganser, C., Teichert, C. & Clemens, H., 31 Dec 2017, In: Advanced engineering materials. 19.2017, 4, 22 p., 1600671.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Impact of Alloying on Stacking Fault Energies in γ-TiAl

    Dumitraschkewitz, P., Clemens, H., Mayer, S. & Holec, D., 17 Nov 2017, In: Applied Sciences : open access journal. 7.2017, 11, 11 p., 1193.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Design and control of microstructure and texture by thermomechanical processing of a multi-phase TiAl alloy

    Spörk, P., Staron, P., Maawad, E., Schell, N., Klose, J., Clemens, H. & Mayer, S., 5 Oct 2017, In: Materials and Design. 131.2017, 5 October, p. 286-296 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. E-pub ahead of print

    On grain boundary segregation in molybdenum materials

    Leitner, K., Felfer, P. J., Holec, D., Cairney, J. M., Knabl, W., Lorich, A., Clemens, H. & Primig, S., 11 Sept 2017, (E-pub ahead of print) In: Materials and Design. 135.2017, 5 December, p. 204-212 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. E-pub ahead of print

    Phase transformations in a β-solidifying γ-TiAl based alloy during rapid solidification

    Kastenhuber, M., Klein, T., Rashkova, B., Weißensteiner, I., Clemens, H. & Mayer, S., 1 Sept 2017, (E-pub ahead of print) In: Intermetallics. 91.2017, December, p. 100-109 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Crack path identification in a nanostructured pearlitic steel using atom probe tomography

    Leitner, T., Sackl, S., Völker, B., Riedl, H., Clemens, H., Pippan, R. & Hohenwarter, A., 24 Aug 2017, In: Scripta Materialia. 142.2018, 1 January, p. 66-69 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Insights into the deformation behavior of the CrMnFeCoNi high-entropy alloy revealed by elevated temperature nanoindentation

    Maier-Kiener, V., Schuh, B., George, E. P., Clemens, H. & Hohenwarter, A., 1 Jul 2017, In: Journal of materials research (JMR). 32.2017, 14, p. 2658-2667 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. E-pub ahead of print

    Internal friction and atomic relaxation processes in an intermetallic Mo-rich Ti-44Al-7Mo (γ+βo) model alloy

    Usategui, L., No, M. L., Mayer, S., Clemens, H. & Juan, J. S., 9 Jun 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700.2017, 17 July, p. 495-502 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. E-pub ahead of print

    Atom probe study of B2 order and A2 disorder of the FeCo matrix in an Fe-Co-Mo-alloy

    Turk, C., Leitner, H., Schemmel, I., Clemens, H. & Primig, S., 19 Mar 2017, (E-pub ahead of print) In: Micron. 98.2017, July, p. 24-33 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. E-pub ahead of print

    Intermetallic β-Solidifying γ-TiAl Based Alloys − From Fundamental Research to Application

    Mayer, S., Erdely, P., Fischer, F.-D., Holec, D., Kastenhuber, M., Klein, T. & Clemens, H., 23 Feb 2017, (E-pub ahead of print) In: Advanced engineering materials. 19.2017, 4, 27 p., 1600735.

    Research output: Contribution to journal › Article › Research › peer-review

  20. E-pub ahead of print

    Mechanical behavior and related microstructural aspects of a nano-lamellar TiAl alloy at elevated temperatures

    Klein, T., Usategui, L., Rashkova, B., Nó, M. L., San Juan, J. M., Clemens, H. & Mayer, S., 20 Feb 2017, (E-pub ahead of print) In: Acta materialia. 128.2017, 15 April, p. 440-450 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    The Use of Fluorine to Protect β-Solidifying γ-TiAl-Based Alloys against High-Temperature Oxidation

    Donchev, A., Galetz, M., Mayer, S., Clemens, H. & Schütze, M., 13 Feb 2017, In: MRS Advances. 2017, May, p. 1361-1367 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. E-pub ahead of print

    Impact of Mo on the ωo phase in β-solidifying TiAl alloys: An experimental and computational approach

    Klein, T., Schachermayer, M., Holec, D., Rashkova, B., Clemens, H. & Mayer, S., 1 Feb 2017, (E-pub ahead of print) In: Intermetallics. 85.2017, June, p. 26-33 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...3 4 5 6 7 8 9 10 ...32 Next
View graph of relations

Latest Research Output

View more (626)