Helmut Clemens

(Former)

401 - 500 out of 626Page size: 100

Research output

  1. 2011
  2. Published

    SANS Study of Carbon Addition in Ti-45Al-5Nb

    Staron, P., Schimansky, F.-P., Scheu, C. & Clemens, H., 2011, Materials Research Society symposium proceedings Vol. 1295. Materials Research Society : MRS, p. 195-200

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    SEM and TEM Investigations of Recovery and Recrystallization in Technically Pure Molybdenum

    Primig, S., Leitner, H., Lorich, A., Knabl, W., Clemens, H. & Stickler, R., 2011, In: Practical metallography = Praktische Metallographie. p. 344-355

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    The Characterisation of a Powder Metallurgically Manufactured TNMTM Titanium Aluminide Alloy Using Complimentary Quantitative Methods

    Schloffer, M., Schmölzer, T., Mayer, S., Schwaighofer, E., Hawranek, G., Schimansky, F.-P., Pyczak, F. & Clemens, H., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 594-604

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    The Contribution of High-Energy X-Rays and Neutrons to Characterization and Development of Intermetallic Titanium Aluminides

    Schmölzer, T., Liss, K.-D., Peter, S., Mayer, S. & Clemens, H., 2011, In: Advanced engineering materials. p. 685-699

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Thermodynamic Description of Niobium-Rich Gamma-TiAl Alloys

    Liu, Y., Gamsjäger, E. & Clemens, H., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 102, p. 692-696

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2010
  8. Published

    WERKSTOFF FÜR EIN GASTURBINENBAUTEIL, VERFAHREN ZUR HERSTELLUNG EINES GASTURBINENBAUTEILS SOWIE GASTURBINENBAUTEIL

    Smarsly, W. (Inventor), Clemens, H. (Inventor), Guether, V. (Inventor), Kremmer, S. (Inventor), Otto, A. (Inventor) & Chladil, H. (Inventor), 15 Sept 2010, IPC No. C22F 1/ 18 A I, Patent No. EP2227571, Priority date 18 Oct 2008, Priority No. WO2008DE01702

    Research output: Patent

  9. Published

    56. Metallkunde-Kolloquium - Abstractband

    Clemens, H. (Editor) & Kneißl, A. (Editor), 2010, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  10. Published

    Analysis of the multistage phase separation reaction in Fe-25 at% Co-9at%Mo

    Eidenberger, E., Schober, M., Schmölzer, T., Stergar, E., Peter, S., Leitner, H. & Clemens, H., 2010, In: Physica status solidi / A. p. 2238-2246

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Behaviour of a maraging steel under quasi-static and dynamic compressive loading

    Lach, E., Schnitzer, R., Leitner, H., Redjaimia, A. & Clemens, H., 2010, In: International journal of microstructure and materials properties (IJMMP). 5, p. 65-78

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Can local hot spots induce alpha2/gamma lamellae during incomplete massive transformation of gamma-TiAl alloys?

    Fischer, F. D., Cha, L., Dehm, G. & Clemens, H., 2010, In: Intermetallics. 18, p. 972-976

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Carbon Strengthening Mechanismus in Ti-48.5Al-0,4C and Ti-45Al-Nb-0.5C Studied by Small-angle Neutron

    Staron, P., Schimansky, F.-P., Scheu, C. & Clemens, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    Characterization of the Deformation Behavior of gamma-TiAl Based Alloys by In-situ X-ray Diffraction

    Schmölzer, T., Liss, K.-D., Rester, M., Yan, K., Peel, M. & Clemens, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Characterization of TiAl by means of in-situ synchrotron radiation

    Schmölzer, T., Liss, K.-D., Zickler, G., Mayer, S. & Clemens, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    Charakterisierung einer Pulvermetallurgisch hergestellten TNM TM-Titanaluminid Legierung mittels komplementärer quantitativer Methoden

    Schloffer, M., Schmölzer, T., Mayer, S., Schwaighofer, E., Hawranek, G., Schimansky, F.-P., Pyczak, F. & Clemens, H., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 239-244

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Dynamic Recovery and Recrystallization during Hot-Working in an advanced tial alloy

    Schmölzer, T., Liss, K.-D., Rester, M., Yan, K., Stark, A., Reid, M., Peel, M. & Clemens, H., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 215-220

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Einfluss von Wärmebehandlungen auf das Gefüge einer mehrphasigen Titanalumind-Legierung

    Schwaighofer, E., Schloffer, M., Schmölzer, T., Mayer, S., Clemens, H. & Guether, V., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 221-226

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Erholungs- und Rekristallisationsverhalten von technisch reinem Molybdän

    Primig, S., Leitner, H., Clemens, H., Stickler, R., Lorich, A., Knabl, W. & Köck, W., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. 155, p. 20-25

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Evolution of microstructure and texture in Ti-46Al-9Nb sheet material during tensile flow at elevated temperatures

    Bystrzanowski, S., Bartels, A., Stark, A., Gerling, R., Schimansky, F.-P. & Clemens, H., 2010, In: Intermetallics. p. 1046-1055

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Fortschritte in der Metallographie 42. 2010

    Kneißl, A. (Co-editor) & Clemens, H. (Co-editor), 2010, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  22. Published

    Influence of reverted austenite on static and dynamic mechanical properties of a PH 13-8 Mo maraging steel

    Schnitzer, R., Zickler, G., Erhardt, L., Clemens, H., Zinner, S., Thomas, L. & Leitner, H., 2010, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, p. 2065-2070

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    In situ small-angle neutron scattering study of the early stages of precipitation in Fe-25at% Co-9at% Mo and Fe-1at% Cu at 500°C

    Staron, P., Eidenberger, E., Schober, M., Sharp, M., Leitner, H., Schreyer, A. & Clemens, H., 2010, In: Journal of physics / Conference series. 247, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Intermetallische y-Titanaluminid-Basislegierungen aus metallographischer Sicht

    Clemens, H. & Mayer, S., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 13-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Kinetics of Precipitation in a Complex Hot-Work Tool Steel

    Sonderegger, B., Kozeschnik, E., Leitner, H., Clemens, H., Svoboda, J., Fischer, F. D. & Staron, P., 2010, In: Steel research international. 81, p. 64-73

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Mechanisches und chemisches Verhalten von Lean-Duplex-Stählen nach Wärmebehandlungen in kritischen Temperaturbereichen

    Ragger, K., Panzenböck, M., Clemens, H. & Chladil, H., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 394-401

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Metallurgy, Microstructure and Properties of Intermetallic TiAl Ingots

    Güther, V., Rothe, C., Winter, S. & Clemens, H., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. 155, p. 325-329

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    NEW SAMPLE ENVIRONMENTS FOR IN-SITU MATERIALS SCIENCE SYNCHROTRON RADIATION STUDIES

    Lippmann, T., Fischer, T., Staron, P., Zickler, G., Schnitzer, R., Martins, R. V., Stark, A., Oehring, M., Bergmann, L., dos Santos, J., Pyczak, F., Müller, M., Clemens, H. & Schreyer, A., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    On the recrystallization behavior of technically pure molybdenum

    Primig, S., Leitner, H., Clemens, H., Lorich, A., Knabl, W. & Stickler, R., 2010, In: International journal of refractory metals & hard materials. p. 703-708

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Phase fractions, transition and ordering temperatures in TiAl-Nb-Mo alloys: An in- and ex-situ study

    Schmölzer, T., Liss, K.-D., Zickler, G., Watson, I. J., Droessler, L., Wallgram, W., Buslaps, T., Studer, A. & Clemens, H., 2010, In: Intermetallics. p. 1544-1552

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Phase Transition and Ordering Temperatures of TiAl-Mo Alloys Investigated by In-Situ Diffraction Experiments

    Schmölzer, T., Mayer, S., Haupt, F., Zickler, G., Sailer, C., Lottermoser, L., Güther, V., Liss, K.-D. & Clemens, H., 2010, In: Materials Science Forum . p. 456-459

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Precipitation Behavior of Fe-25 At. Pct Co-9 At. Pct Mo Investigated by In-Situ small-Angle Neutron Scattering and Coplementary Methods

    Eidenberger, E., Schober, M., Stergar, E., Leitner, H., Staron, P. & Clemens, H., 2010, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . p. 1230-1234

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Precipitation behavior of intermetallic NiAl particles in Fe-6 at.%Al-4 at.%Ni analyzed by SANS and 3DAP

    Schober, M., Lerchbacher, C., Eidenberger, E., Staron, P., Clemens, H. & Leitner, H., 2010, In: Intermetallics. p. 1553-1559

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Reibschweißen von intermetallischen Titanaluminiden - Gefügeentwicklung und mechanische Eigenschaften

    Mayer, S., Appel, L., Cramer, H. & Clemens, H., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 227-232

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    SEM and TEM investigations of recovery and recrystallization in Technically pure Molybdenum

    Primig, S., Leitner, H., Lorich, A., Knabl, W., Clemens, H. & Stickler, R., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 289-294

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Short-term Creep Behavior of an X 37 Cr Mo V 5-1 Hot-work Tool Steel with almost Bainitic and fully Martensitic Microstructures

    Wurmbauer, H., Leitner, H., Panzenböck, M., Scheu, C. & Clemens, H., 2010, In: Steel research international. p. 569-575

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Short-term creep behavior of chromium rich hot-work tool steels

    Wurmbauer, H., Panzenböck, M., Leitner, H., Scheu, C. & Clemens, H., 2010, In: Materialwissenschaft und Werkstofftechnik. 41, p. 18-28

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Spinodal decomposition in Fe-25 at%Co-9 at%Mo

    Eidenberger, E., Schober, M., Staron, P., Caliskanoglu, D., Leitner, H. & Clemens, H., 2010, In: Intermetallics. p. 2128-2135

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Study of nanometer-scaled lamellar microstructure in a Ti-45Al-7.5Nb alloy-Experiments and modeling

    Fischer, F. D., Waitz, T., Scheu, C., Cha, L., Dehm, G., Antretter, T. & Clemens, H., 2010, In: Intermetallics. 18, p. 509-517

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Temperature fields in particles and in their environment due to sudden phase transformations

    Fischer, F. D., Leindl, M., Dirschmid, H., Vollath, D. & Clemens, H., 2010, In: Zeitschrift für angewandte Mathematik und Mechanik : ZAMM = Journal of applied mathematics and mechanics. p. 641-650

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Texture Formation during Hot-Deformation of High-Nb Containing y-TiAl Based Alloys

    Stark, A., Schimansky, F.-P. & Clemens, H., 2010, Texture and anisotropy of polycrystals III : selected, peer reviewed papers from the 3rd International Conference on Texture and Anisotropy of Polycrystals (ITAP-3) held in Göttingen, Germany, 23 - 25 September 2009 . p. 301-306 (Solid state phenomena; vol. 160).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    The effect of Si on phase fractions and transition temperatures of a TiAl-Mo alloy: HASYLAB Annual Report

    Schmölzer, T., Mayer, S., Schwaighofer, E., Lippmann, T., Staron, P., Stark, A. & Clemens, H., 2010

    Research output: Non-textual form › Web publication/site › Research

  43. Published

    Titan, Titanlegierungen und Titanaluminide - Basis für innovative Anwendungen

    Peters, M. & Clemens, H., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 402-408

    Research output: Contribution to journal › Article › Research › peer-review

  44. 2009
  45. Published

    MATERIAL FOR A GAS TURBINE COMPONENT, METHOD FOR PRODUCING A GAS TURBINE COMPONENT AS WELL AS A GAS TURBINE COMPONENT

    Smarsly, W. (Inventor), Clemens, H. (Inventor), Guether, V. (Inventor), Kremmer, S. (Inventor), Otto, A. (Inventor) & Chladil, H. (Inventor), 30 Apr 2009, IPC No. C22F 1/ 18 A I, Patent No. CA2703906, Priority date 18 Oct 2008, Priority No. WO2008DE01702

    Research output: Patent

  46. Published

    Werkstoff für ein Gasturbinenbauteil, Verfahren zur Herstellung eines Gasturbinenbauteils sowie Gasturbinenbauteil

    Chladil, H. (Inventor), Guether, V. (Inventor), Helmut, C. (Inventor), Kremmer, S. (Inventor), Otto, A. (Inventor) & Smarsly, W. (Inventor), 30 Apr 2009, IPC No. C22C 21/ 00 A I, Patent No. DE102007051499, Priority date 27 Oct 2007, Priority No. DE20071051499

    Research output: Patent

  47. Published

    WERKSTOFF FÜR EIN GASTURBINENBAUTEIL, VERFAHREN ZUR HERSTELLUNG EINES GASTURBINENBAUTEILS SOWIE GASTURBINENBAUTEIL

    Smarsly, W. (Inventor), Clemens, H. (Inventor), Guether, V. (Inventor), Kremmer, S. (Inventor), Otto, A. (Inventor) & Chladil, H. (Inventor), 30 Apr 2009, IPC No. C22F 1/ 18 A I, Patent No. WO2009052792, Priority date 27 Oct 2007, Priority No. DE20071051499

    Research output: Patent

  48. Published

    55. Metallkunde-Kolloquium - Abstractband

    Clemens, H. (Editor) & Kneißl, A. (Editor), 2009, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  49. Published

    Changes in Tempering and its Effect on Precipitation Behaviour in a Hot-work Tool Steel

    Mayer, S., Leitner, H., Scheu, C., Siller, I. & Clemens, H., 2009, In: Steel research international. 80, p. 89-95

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Characterization of Reverted Austenite during Prolonged Ageing of Maraging Steel Corrax

    Höring, S., Abou-Ras, D., Wanderka, N., Leitner, H., Clemens, H. & Banhart, J., 2009, In: Steel research international. 80, p. 84-88

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Combined use of small-angle neutron scattering and atom probe tomography for the analysis of precipitates in a Fe-15 m%CO-25 m%Mo alloy

    Eidenberger, E., Stergar, E., Leitner, H., Staron, P., Spitaler, J., Draxl, C. & Clemens, H., 2009, In: Applied physics / A (Series A, Materials science & processing). 97, p. 331-340

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Correlation between heat treatment, microstructure and mechanical properties of a hot-work tool steel

    Mayer, S., Scheu, C., Leitner, H., Siller, I. & Clemens, H., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 86-91

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Entwicklung eines Schmiedeverfahrens zur Umformung von intermetallischen Titanaluminiden

    Wallgram, W., Stockinger, M., Schmölzer, T. & Clemens, H., 2009, Forum für Metallurgie und Werkstofftechnik 2009. p. 49-52

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Entwicklung und Eigenschaften intermetallischer Titanaluminide für Flugzeugtriebwerke

    Clemens, H., 2009, Gefüge und Bruch. p. 177-187

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Experimental Studies and Thermodynamic Simulations of Phase Transformations in Ti-(41-45) Al-4Nb-1Mo-0.1B Alloys

    Clemens, H., Böck, B., Wallgram, W., Schmölzer, T., Drössler, L. M., Zickler, G., Leitner, H. & Otto, A., 2009, Experimental Studies and Thermodynamic Simulations of Phase Transformations in Ti-(41-45) Al-4Nb-1Mo-0.1B Alloys. Materials Research Society : MRS, p. 115-120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    High carbon solubility in a y-TiAl-based Ti-45Al-5Nb-0.5C alloy and its effect on hardening

    Scheu, C., Stergar, E., Schober, M., Cha, L., Clemens, H., Bartels, C., Schimansky, F.-P. & Cerezo, A., 2009, In: Acta materialia. 57, p. 1504-1511

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Hot-die Forging of a beta-stabilized gamma-TiAl Based Alloys

    Wallgram, W., Kremmer, S., Clemens, H., Otto, A. & Güther, V., 2009, Hot-die Forging of a beta-stabilized gamma-TiAl Based Alloys. Materials Research Society : MRS, p. 109-114

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Initial Stages of Lamellae Formation in High Nb Containing gamma-TiAl Based Alloys

    Cha, L., Scheu, C., Dehm, G., Schnitzer, R. & Clemens, H., 2009, Initial Stages of Lamellae Formation in High Nb Containing gamma-TiAl Based Alloys. Materials Research Society : MRS, p. 153-158

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    In Situ Characterization of a Nb and Mo Containing y-TiAl Based Alloy Using Neutron Diffraction and High-Temperature Microscopy

    Watson, B. I. J., Liss, K.-D., Clemens, H., Wallgram, W., Schmölzer, T., Hansen, T. C. & Reid, M., 2009, In: Advanced engineering materials. 11, p. 932-937

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    In situ study of dynamic recrystallization and hot deformation behavior of a multiphase titanium aluminide alloy

    Liss, K.-D., Schmölzer, T., Yan, K., Reid, M., Peel, M., Dippenaar, R. & Clemens, H., 2009, In: Journal of applied physics. 106, p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Intermetallische Werkstoffe, Flugzeugtriebwerke, Nano und Klimaschutz - ein Widerspruch

    Clemens, H., 2009, Werkstoff- und Nanotechnologien - Rohstoff für Innovationen. p. 19-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Microstructure and Tensile Ductility of a Ti-43Al-4Nb-1Mo-0.1B Alloy

    Drössler, L. M., Schmölzer, T., Wallgram, W., Cha, L., Das, G. & Clemens, H., 2009, Microstructure and Tensile Ductility of a Ti-43Al-4Nb-1Mo-0.1B Alloy. Materials Research Society : MRS, p. 121-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Microstructure and Texture Formation During Near Conventional Forging of an Intermetallic Ti-45Al-5Nb Alloy

    Stark, A., Bartels, A., Clemens, H., Kremmer, S., Schimansky, F.-P. & Gerling, R., 2009, In: Advanced engineering materials. 11, p. 976-981

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Mikrostrukturelle Charakterisierung von PH 13-8 Mo Maraging-Stählen

    Schnitzer, R., Hochfellner, R., Nöhrer, M., Schober, M., Clemens, H., Zinner, S. & Leitner, H., 2009, In: Practical metallography = Praktische Metallographie. p. 521-536

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    New sample environments for in-situ materials science synchrotron radiation studies

    Lippmann, T., Fischer, T., Staron, P., Zickler, G., Schnitzer, R., Martins, R. V., Stark, A., Oehring, M., Bergmann, L., dos Santos, J., Pyczak, F., Müller, M., Clemens, H. & Schreyer, A., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  66. Published

    On the Recrystallization Behavior of Technically Pure Molybdenum

    Primig, S., Leitner, H., Rodriguez Chavez, A., Clemens, H., Lorich, A., Knabl, W. & Stickler, R., 2009, proc. in 17 th Plansee Seminar. p. 15/1-15/9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Revealing deformation mechanisms in small dimensions with micro-compression and nanoindentation tests

    Rester, M., Kirchlechner, C., Motz, C., Pippan, R., Clemens, H. & Dehm, G., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  68. Published

    Short-term creep behavior of a Cr Mo V hot-work tool steel

    Wurmbauer, H., Leitner, H., Panzenböck, M., Scheu, C. & Clemens, H., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 1066-1073

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Technology and mechanical properties of advanced y-TiAl based alloys

    Wallgram, W., Schmölzer, T., Cha, L., Das, G., Güther, V. & Clemens, H., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 1021-1029

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Thermal stability of high-speed steels as characterized by X-ray diffraction profile analysis

    Leitner, H. & Clemens, H., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 1109-1113

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Thermisches Ätzen zur Bestimmung der Austenitkorngröße in sehr kohlenstoffarmen Stählen

    Pöhl, C., Gamsjäger, E., Leitner, H. & Clemens, H., 2009, In: Practical metallography = Praktische Metallographie. 46, p. 9-23

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Triebwerke von morgen: effizient, leicht, leiste

    Clemens, H., 2009, Stoffe aus denen die Zukunft ist. p. 9-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Werkstoffe als Motor des Fortschritts

    Clemens, H., 2009, Stoffe aus denen die Zukunft ist. p. 15-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Werkstoffwissenschaft

    Clemens, H., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 154 Jg., p. 342-345

    Research output: Contribution to journal › Article › Research › peer-review

  75. 2008
  76. Published

    54. Metallkunde-Kolloquium - Abstractband

    Clemens, H. (Editor) & Kneißl, A. (Editor), 2008, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  77. Published

    A beta-stabilized gamma-TiAl Based Alloy for improved processing performance

    Clemens, H., Chladil, H., Wallgram, W., Böck, B., Kremmer, S., Otto, A., Güther, V. & Bartels, A., 2008, Structural Aluminides for Elevated Temperatures. TMS, p. 217-228

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Characteristics of the tensile flow behavior of Nb-46Al-9Nb sheet material – analysis of thermally-activated processes of plastic deformation

    Bystrzanowski, S., BARTELS, A., Clemens, H. & Gerling, R., 2008, In: Intermetallics. 16, p. 717-726

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Characterization of Phospholipid Bilayers on Ti-6Al-4V and Ti-6Al-7Nb

    Pressl, D., Teichert, C., Hlawacek, G., Clemens, H., Iliev, P. P., Schuster, A., Feyerabend, F. & Willumeit, R., 2008, In: Advanced engineering materials. 10, p. B47-B52

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Computational Analysis of the Precipitation Kinetics in a Complex Tool Steel

    Sonderegger, B., Kozeschnik, E., Leitner, H., Clemens, H., Svoboda, J. & Fischer, F. D., 2008, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 99, p. 410-415

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Design of Novel ß-solidifying TiAl Alloys with Adjustable ß/B2-phase Fraction and Excellent Hot-Workability

    Clemens, H., Wallgram, W., Kremmer, S., Güther, V., Otto, A. & Bartels, A., 2008, In: Advanced engineering materials. 10, p. 707-713

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Diffraction-based Residual Stress Analysis Applied to Problems in the Aircraft Industry

    Staron, P., Cihak, U., Clemens, H., Stockinger, M., Bayraktar, F. S., Vaidya, V. V., Kocak, M. & Schreyer, A., 2008, Neutrons and Synchrotron Radiation in Engineering Materials Science from Fundamentals to Material and Component Characterization. p. 389-412

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  83. Published

    Directional Atomic Rearrangements during Transformations between the apha- and gamma-phases in TiAl”

    Liss, K.-D., Stark, A., BARTELS, A., Clemens, H., Buslaps, T., Phelan, D. & Yeoh, L., 2008, In: Advanced engineering materials. 10, p. 389-392

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    In- and Ex-situ Investigation of the beta-phase in a Nb and Mo Containing gamma-TiAl Based Alloy

    Clemens, H., Chladil, H., Wallgram, W., Zickler, G., Gerling, R., Liss, K.-D., Kremmer, S., Güther, V. & Smarsly, W., 2008, In: Intermetallics. 16, p. 827-833

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Influence of aluminium nitride on the high-temperature ductility of continuous cast slabs

    Winkelhofer, F., Parteder, E., Clemens, H., Leitner, H., Spiradek-Hahn, K. & Kozeschnik, E., 2008, In: Practical metallography = Praktische Metallographie. 45, p. 159-172

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Influence of C and Nb Concentration on the High Temperature Deformation Behaviour of Nb-rich Gamma-TiAl Alloys

    Stark, A., Bartels, A., Schimansky, F.-P., Gerling, R. & Clemens, H., 2008, Ti-2007 Science and Technology. p. 685-688

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    INFLUENCE OF OXIDATION PROTECTIVE COATINGS ON THE DUCTILITY OF A gamma-TiAl BASED ALLOY

    Moser, M., Mayrhofer, P. H. & Clemens, H., 2008,

    The Minerals, Metals & Materials Society, 137th annual meeting proceedings

    .     TMS, p. 305-313

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    In-situ Characterization of Phase Transformations and Microstructure Evolution in a gamma-TiAl Based Alloys

    Liss, K.-D., BARTELS, A., Clemens, H., Stark, A., Buslaps, T., Phelan, D. & Yeoh, L. A., 2008, Structural Aluminides for Elevated Temperatures. TMS, p. 137-144

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    In-situ high-temperature characterisation of phase transformations in intermetallic γ-TiAl alloys

    Zickler, G., Drössler, L., Clemens, H., Klaus-Dieter, L. & Hölzel, M., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  90. Published

    In-situ High-Temperature SAXS Studies of the Precipitation Kinetics in a Fe-Co-Mo Alloy

    Zickler, G., Eidenberger, E., Stergar, E., Leitner, H., Clemens, H., Lippmann, T., Staron, P., Fischer, T., Schreyer, A. & Novak, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  91. Published

    In-situ small-angle X-ray scattering study of the precipitation behavior in a Fe-25 at.%Co-9 at.%Mo alloy

    Zickler, G., Eidenberger, E., Leitner, H., Stergar, E., Clemens, H., Staron, P., Lippmann, T. & Schreyer, A., 2008, In: Materials characterization. 59, p. 1809-1813

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Intermetallische Werkstoffe für Anwendungen in Automobil- und Flugzeugtriebwerken

    Clemens, H., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 337-341

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Isothermal aging kinetics of NiAl precipitates in a secondary hardening steel

    Erlach, S., Siller, I., Leitner, H. & Clemens, H., 2008, In: International journal of microstructure and materials properties (IJMMP). 3, p. 373-382

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Kurzzeitkriechverhalten eines Warmarbeitsstahls

    Wurmbauer, H., Scheu, C., Panzenböck, M., Stergar, E., Leitner, H., Clemens, H. & Caliskanoglu, Z. D., 2008, Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung. p. 251-256

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Microstructure and corresponding tensile properties of As-cast, beta-solidifying, gamma-TiAl based TNM alloys

    Güther, V., Otto, A., Klose, J., Rothe, C., Clemens, H., Kachler, W., Winter, S. & Kremmer, S., 2008, Structural Aluminides for Elevated Temperatures. TMS, p. 249-256

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Microstructure and Mechanical Properties of a Hot-work Tool Steel

    Mayer, S., Scheu, C., Leitner, H., Siller, I. & Clemens, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  97. Published

    Microstructure and Mechanical Properties of Ti-45Al-5Nb + (0 - 0.5C) Sheets

    Gerling, R., Schimansky, F. P., Stark, A., BARTELS, A., Kestler, H., Cha, L., Scheu, C. & Clemens, H., 2008, In: Intermetallics. 16, p. 689-697

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Microstructure and Properties of Engineering Materials

    Clemens, H. & Scheu, C., 2008, Neutrons and Synchrotron Radiation in Engineering Materials Science from Fundamentals to Material and Component Characterization. p. 3-20

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  99. Published

    Nanometer-scaled lamellar microstructures in Ti–45Al–7.5Nb–(0; 0.5)C alloys and their influence on hardness

    Cha, L., Scheu, C., Clemens, H., Chladil, H., Dehm, G., Gerling, R. & BARTELS, A., 2008, In: Intermetallics. 16, p. 868-875

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Near Conventional Forging of Titanium Aluminides

    Kremmer, S., Chladil, H., Clemens, H., Otto, A. & Güther, V., 2008, Ti-2007 Science and Technology. p. 989-992

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Neutrons and Synchrotron Radiation in Engineering Materials Science

    Reimers, W. (Co-editor), Pyzalla, A. (Co-editor), Schreyer, A. (Co-editor) & Clemens, H. (Co-editor), 2008, Weinheim: Wiley-VCH .

    Research output: Book/Report › Book › Research

  102. Published

    Observation of the precipitation behaviour of Fe-25Co-15Mo by SANS and 3DAP

    Eidenberger, E., Stergar, E., Staron, P., Leitner, H. & Clemens, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  103. Published

    On the Formation of Ordered w-phase in High Nb Containing γ-TiAl Based Alloys”

    Stark, A., BARTELS, A., Clemens, H. & Schimansky, F.-P., 2008, In: Advanced engineering materials. 10, p. 929-934

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    On the influence of coating and oxidation on the mechanical properties of a gamma-TiAl based alloy

    Moser, M., Mayrhofer, P. H. & Clemens, H., 2008, In: Intermetallics. 16, p. 1206-1211

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 Next
View graph of relations

Latest Research Output

View more (626)