Helmut Clemens

(Former)

151 - 200 out of 626Page size: 50

Research output

  1. 2017
  2. Published

    In situ Experiments with Synchrotron High-Energy X-rays and Neutrons

    Staron, P., Fischer, T., Lippmann, T., Stark, A., Daneshpour, S., Schnubel, D., Uhlmann, E., Gerstenberger, R., Camin, B., Reimers, W., Eidenberger, E., Clemens, H., Huber, N. & Schreyer, A., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 365-376

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  3. Published

    Interaction of precipitation, recovery and recrystallization in the Mo-Hf-C alloy MHC studied by multipass compression tests

    Siller, M., Lang, D., Schatte, J., Knabl, W., Clemens, H. & Maier-Kiener, V., 2017, 19th Plansee Seminar. p. 21/1-21/10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Microstructure and Properties of Engineering Materials

    Clemens, H., Mayer, S. & Scheu, C., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 3-20

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  5. Published

    Nanoindentation testing as a powerful screening tool for assessing phase stability of nanocrystalline high-entropy alloys

    Maier-Kiener, V., Schuh, B., George, E. P., Clemens, H. & Hohenwarter, A., 2017, In: Materials and Design. 115.2017, 5 February, p. 479-485 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications

    Staron, P., Schreyer, A., Clemens, H. & Mayer, S., 2017, 2 ed. Wiley-VCH . 462 p.

    Research output: Book/Report › Scholarly edition

  7. Published

    Physical metallurgy of the molybdenum base alloy MHC

    Lang, D., Schatte, J., Knabl, W. & Clemens, H., 2017, 19th Plansee Seminar. p. 5/1-5/9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Thermodynamic evaluation of the Mo-rich corner of the Mo-Hf-C system including O impurities

    Lang, D., Povoden-Karadeniz, E., Schatte, J., Knabl, W., Clemens, H. & Primig, S., 2017, In: Journal of alloys and compounds. 695.2017, 25 February, p. 372-381 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Untersuchungen des Ausscheidungsverhaltens von H-Karbiden in einer kohlenstoffhaltigen TiAl Legierung mittels in- und ex-situ Experimenten

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2017, Praktische Metallographie Sonderband 51. p. 55-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Werkstoffcharakterisierung mittels hochauflösender dreidimensionaler Atomsondentomographie

    Mayer, S., Maier-Kiener, V., Mendez Martin, F., Panzenböck, M., Rashkova, B. & Clemens, H., 2017, In: Jahresmagazin Materialographie, Metallographie : Ingenieurwissenschaften ... : im Fokus. 2017, p. 56-60 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. 2016
  12. Published

    Nanoindentation testing as a tool for assessing the microstructure-property relationship of ultrafine grained and single crystalline HEAs

    Maier-Kiener, V., Schuh, B., George, E., Clemens, H. & Hohenwarter, A., 29 Dec 2016.

    Research output: Contribution to conference › Presentation › Research

  13. Published

    Creep Behavior of a β-solidifying TiAl Alloy with Fully Lamellar Microstructure

    Burtscher, M., Klein, T., Mayer, S. & Clemens, H., 28 Nov 2016.

    Research output: Contribution to conference › Presentation › Research

  14. Published

    Improved ductility and toughness of an FeCoMo alloy

    Turk, C., Kellezi, G., Schemmel, I., Leitner, H. & Clemens, H., 5 Oct 2016.

    Research output: Contribution to conference › Presentation › Research

  15. Published

    Advancement of Compositional and Microstructural Design of Intermetallic γ-TiAl Based Alloys Determined by Atom Probe Tomography

    Klein, T., Clemens, H. & Mayer, S., 6 Sept 2016, In: Materials. 9.2016, 9, p. 755-774 20 p., 755.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Induction Tempering vs Conventional Tempering of a Heat-Treatable Steel

    Sackl, S. C., Zuber, C., Clemens, H. & Primig, S., 3 May 2016, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 47.2016, July, p. 3694-3703 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Phase Characterization of a Biocompatible Co-Cr-W Alloy by means of Correlative Microscopy

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 28 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  18. Published

    Transmission Kikuchi Diffraction: A technique to support the atom probe specimen preparation

    Babinsky, K., Primig, S. & Clemens, H., 28 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  19. Published

    Textur- und Gefügeentwicklung in warmgewalzten und wärmebehandelten TNM-Blechen

    Erdely, P., Staron, P., Maawad, E., Schell, N., Bartels, A., Güther, V., Rothe, C., Klose, J., Mayer, S. & Clemens, H., 13 Apr 2016, p. 1-13.

    Research output: Contribution to conference › Presentation › Research

  20. Published

    Designkriterien für kriechfeste Titanaluminid-Legierungen

    Clemens, H. & Mayer, S., 12 Apr 2016, p. 1-18.

    Research output: Contribution to conference › Presentation › Research

  21. Published

    Korngrenzen in technisch reinem Molybdän: Eine atomare Untersuchung mittels Atomsondentomographie

    Babinsky, K., Primig, S., Knabl, W., Lorich, A., Clemens, H. & Sackl, S. C., 12 Apr 2016, p. 1-15. 15 p.

    Research output: Contribution to conference › Presentation › Research

  22. Published

    MATERIAL FOR A GAS TURBINE COMPONENT, METHOD FOR PRODUCING A GAS TURBINE COMPONENT AND GAS TURBINE COMPONENT

    Smarsly, W. (Inventor), Clemens, H. (Inventor), Guether, V. (Inventor), Kremmer, S. (Inventor), Otto, A. (Inventor) & Chladil, H. (Inventor), 29 Feb 2016, IPC No. C22F 1/ 18 A I, Patent No. PL2227571T, Priority date 18 Oct 2008, Priority No. EP20080841961

    Research output: Patent

  23. Published

    Microstructural stability of a single-phase nanocrystalline CoCrFeMnNi high-entropy alloy

    Schuh, B., Hohenwarter, A., Maier-Kiener, V., Clemens, H., Völker, B., Mendez Martin, F. & George, E., 15 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  24. Published

    In Situ Characterization Techniques Based on Synchrotron Radiation and Neutrons Applied for the Development of an Engineering Intermetallic Titanium Aluminide Alloy

    Erdely, P., Schmoelzer, T., Schwaighofer, E., Clemens, H., Staron, P., Stark, A., Liss, K.-D. & Mayer, S., 4 Jan 2016, In: Metals : open access journal . 6.2016, 1, p. 1-27 27 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Advanced Intermetallic Titanium Aluminides

    Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  26. Published

    Advanced Intermetallic Titanium Aluminides

    Clemens, H., Smarsly, W., Güther, V. & Mayer, S., 2016, 13th World Conference on Titanium. USA, p. 1189–1200 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Alloy Design Rules for Advanced Titanium Aluminides

    Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    Alloy Design Rules for Advanced Titanium Aluminides

    Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  29. Published

    Analyse einer Co-Cr-W Legierung mittels korrelativer Mikroskopie und Nanoindentation

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 2016.

    Research output: Contribution to conference › Presentation › Research

  30. Published

    Applications of site-specific atom probe specimen preparation by focused ion beam and transmission Kikuchi diffraction

    Turk, C., Leitner, K., Lang, D., Haslberger, P., Hofer, C., Clemens, H. & Primig, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  31. Published

    Characterisation of advanced intermetallic titanium aluminide alloys by means of diffraction and scattering techniques

    Erdely, P., Mayer, S. & Clemens, H., 2016.

    Research output: Contribution to conference › Poster › Research

  32. Published

    Correlative microscopy of a carbide-free bainitic steel

    Hofer, C., Bliznuk, V., Verdiere, A., Petrov, R., Winkelhofer, F., Clemens, H. & Primig, S., 2016, In: Micron. 81, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Correlative study of grain boundary segregation in sintered molybdenum alloys

    Lutz, D., Leitner, K., Huber, K., Lorich, A., Maier-Kiener, V. & Clemens, H., 2016.

    Research output: Contribution to conference › Presentation › Research

  34. Published

    Die Rolle der Metallographie bei der Charakterisierung von Hochleistungswerkstoffe

    Mayer, S., Rashkova, B., Mendez Martin, F., Primig, S., Panzenböck, M. & Clemens, H., 2016, In: Jahresmagazin Materialographie, Metallographie : Ingenieurwissenschaften ... : im Fokus. 2016, p. 82-87 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Effect of different bainite morphologies on the formability of advanced high strength steels

    Weißensteiner, I., Hebesberger, T. & Clemens, H., 2016.

    Research output: Contribution to conference › Poster › Research

  36. Published

    Einfluss von Aluminium auf die Karbidbildung im Schnellarbeitsstahl

    Kellezi, G., Leitner, H. & Clemens, H., 2016, In: Berg- und hüttenmännische Monatshefte : BHM. 161, 3, p. 108-115 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Evolution of strain-induced hafnium carbides in a molybdenum base MoeHfeC alloy studied by small-angle neutron scattering and complementary methods

    Lang, D., Karge, L., Schatte, J., Gilles, R., Dallinger, R., Weißensteiner, I., Staron, P., Knabl, W., Primig, S. & Clemens, H., 2016, In: Journal of alloys and compounds. 688, p. 619-631 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Evolution of texture and microstructure in multi-phase TNM sheets during hot rolling and subsequent heat treatments

    Erdely, P., Staron, P., Maawad, E., Schell, N., Güther, V., Rothe, C., Klose, J., Clemens, H. & Mayer, S., 2016. 1 p.

    Research output: Contribution to conference › Poster › Research

  39. Published

    Experimental and theoretical evidence of displacive martensite in an intermetallic Mo-containing Ƴ-TiAl based alloy

    Mayer, S., Petersmann, M., Fischer, F. D., Clemens, H., Waitz, T. & Antretter, T., 2016, In: Acta materialia. 115, p. 242-249 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Forged Intermetallic γ-TiAl Based Alloy Low Pressure Turbine Blade in the Geared Turbofan

    Habel, U., Heutling, D., Kunze, C., Smarsly, W., Das, G. & Clemens, H., 2016, 13th World Conference on Titanium. USA, p. 1223–1227 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Fracture Behavior and Delamination Toughening of Molybdenum in Charpy Impact Tests

    Leitner, K., Primig, S., Knabl, W., Lorich, A., Stickler, R. & Clemens, H., 2016, In: JOM. 68, 11, p. 2854-2863 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Impact of the B2 ordering behavior on the mechanical properties of a Fe Co Mo alloy

    Turk, C., Leitner, H., Kellezi, G., Clemens, H., Gan, W., Staron, P. & Primig, S., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 662, p. 511-518 8 p., 662.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Improved ductility and toughness of a Fe-Co-Mo alloy

    Turk, C., Kellezi, G., Schemmel, I., Leitner, H. & Clemens, H., 2016, 10th TOOL Conference 2016 – Tool 2016 – DoubleTree by Hilton Hotel Bratislava. p. 112-129 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Influence of impurities on the fracture behavior of molybdenum-hafnium alloys

    Babinsky, K., Primig, S., Knabl, W., Lorich, A. & Clemens, H., 2016.

    Research output: Contribution to conference › Presentation › Research

  45. Published

    Intermetallic titanium aluminides in aerospace applications – processing, microstructure and properties

    Clemens, H. & Mayer, S., 2016, In: Materials at High Temperatures. 33, p. 560-570 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Metallographie & Werkstoffentwicklung: Eine persönliche Bestandsaufnahme

    Clemens, H., 2016.

    Research output: Contribution to conference › Presentation › Research

  47. Published

    Microstructural and mechanical characterization of a hot-extruded TiAl alloy for high-performance racing applications

    Lehmann, O., Burtscher, M., Klein, T., Lindemann, J., Güther, V., Fellmann, H. & Clemens, H., 2016.

    Research output: Contribution to conference › Presentation › Research

  48. Published

    Microstructural characterization of ultra-high strength steel welds by means of Light Optical Microscopy and Electron Backscatter Diffraction

    Haslberger, P., Weißensteiner, I., Clemens, H., Ernst, W. & Schnitzer, R., 2016.

    Research output: Contribution to conference › Poster › Research

  49. Published

    Modeling Concepts for Intermetallic Titanium Aluminides

    Appel, F., Clemens, H. & Fischer, F. D., 2016, In: Progress in materials science. 81, p. 55-124

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Morphology change of retained austenite during austempering of carbide-freebainiticsteel

    Hofer, C., Winkelhofer, F., Clemens, H. & Primig, S., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 664, p. 236-246 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Nanoindentation testing as a tool for assessing the microstructure-property relationship of ultrafine grained and single crystalline HEAs

    Maier-Kiener, V., Schuh, B., George, E., Clemens, H. & Hohenwarter, A., 2016.

    Research output: Contribution to conference › Presentation › Research

  52. Published

    Nanokristalline High-Entropy Legierungen

    Hohenwarter, A., Schuh, B., Völker, B., Pippan, R., Maier-Kiener, V., Clemens, H. & George, E. P., 2016.

    Research output: Contribution to conference › Presentation › Research

Previous 1 2 3 4 5 6 7 8 ...13 Next
View graph of relations

Latest Research Output

View more (626)