Helmut Clemens

(Former)

Research output

  1. 2006
  2. Published

    Charakterisierung einer b–erstarrenden g-TiAl-Legierung

    Chladil, H., Clemens, H., Güther, V. & Kremmer, S., 2006, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 51-58

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  3. Published

    Charakterisierung einer Beta-erstarrenden γ-TiAl Basislegierung

    Chladil, H. & Clemens, H., 2006

    Research output: Book/ReportCommissioned reportTransferpeer-review

  4. Published

    Charakterisierung einer β-erstarrenden γ-TiAl-Basislegierung

    Chladil, H., Clemens, H., Otto, A., Güther, V., Kremmer, S., Bartels, A. & Gerling, R., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 356-361

    Research output: Contribution to journalArticleResearchpeer-review

  5. Published

    Charakterisierung von hochniobhältigen Gamma-Titanaluminid Basis-Legierungen

    Chladil, H. & Clemens, H., 2006

    Research output: Book/ReportCommissioned reportTransferpeer-review

  6. Published

    Combining SANS experiments with polarized and unpolarized neutrons to study precipitates in steels

    Bischof, M., Eidenberger, E. & Clemens, H., 2006

    Research output: Book/ReportCommissioned reportTransferpeer-review

  7. Published

    Comparison of NiAl precipitation in a medium carbon secondary hardening steel and C-free PH13-8 maraging steel

    Erlach, S. D., Leitner, H., Bischof, M., Clemens, H., Danoix, F., Lemarchand, D. & Siller, I., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 429, p. 96-106

    Research output: Contribution to journalArticleResearchpeer-review

  8. Published

    Continuum Mechanics of Deformation Twinning – A Review

    Fischer, F. D., Schaden, T., Appel, F. & Clemens, H., 2006, In: Multidiscipline modeling in materials and structures. 2, p. 167-188

    Research output: Contribution to journalArticleResearchpeer-review

  9. Published

    Einfluss des Aluminiumgehaltes auf die Gefügeentwicklung eines niedriglegierten TRIP-Stahls

    Spenger, F., Traint, S., Leitner, H. & Clemens, H., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 215-222

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  10. Published

    Einfluss von Aluminiumnitrid auf die Hochtemperaturduktilität von stranggegossenen Brammen

    Winkelhofer, F., Parteder, E., Leitner, H., Clemens, H., Spiradek-Hahn, K. & Kozeschnik, E., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 281-288

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  11. Published

    Gefügebewertung an einem martensitischen Werkstoff durch Transmissionselektronenmikroskopie (TEM) und Neutronenkleinwinkelstreuung (SANS)

    Sonnleitner, M., Klein, M., Spiradek-Hahn, K., Staron, P., Leitner, H. & Clemens, H., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 97-104

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  12. Published

    Gefügecharakterisierung eines Warmarbeitsstahls mit martensitisch-bainitischem Mischgefüge

    Mayer, S., Pölzl, S., Hawranek, G., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 379-385

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  13. Published
  14. Published

    Grain refinement in gamma-TiAl-based alloys by solid state phase transformations

    Clemens, H., Bartels, A., Bystrzanowski, S., Chladil, H., Leitner, H., Dehm, G., Gerling, R. & Schimansky, F.-P., 2006, In: Intermetallics. 14, p. 1380-1385

    Research output: Contribution to journalArticleResearchpeer-review

  15. Published
  16. Published
  17. Published

    Intermetallics for Higher, Moderate and Low Temperature Applications - Microstructures and properties characterization

    Scheu, C., Clemens, H. & Schaden, T., 2006

    Research output: Book/ReportCommissioned reportTransferpeer-review

  18. Published

    Intermetallics for Higher, Moderate and Low Temperature Applications - Processing routes

    Scheu, C., Clemens, H. & Schaden, T., 2006

    Research output: Book/ReportCommissioned reportTransferpeer-review

  19. Published

    Intermetallische Titanaluminide: Werkstoffe für hohe Temperaturen

    Appel, F. & Clemens, H., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 195-199

    Research output: Contribution to journalArticleResearchpeer-review

  20. Published

    Isothermal Aging Kinetics of NiAl Precipitates in a Secondary Hardening Steel

    Erlach, S. D., Siller, I., Leitner, H. & Clemens, H., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 725-732

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  21. Published

    Mechanical Size-effects in Miniaturized and Bulk Materials

    Dehm, G., Motz, C., Scheu, C., Clemens, H., Mayrhofer, P. H. & Mitterer, C., 2006, In: Advanced engineering materials. 8, p. 1033-1045

    Research output: Contribution to journalArticleResearchpeer-review

  22. Published

    Metallographische Präparation von dotiertem Tantal für licht- und rasterelektronenmikroskopische Mikrostrukturuntersuchungen

    Mayer, S., Pölzl, S., Hawranek, G., Bischof, M., Scheu, C., Clemens, H. & Knabl, W., 2006, In: Practical metallography = Praktische Metallographie. 43, p. 614-628

    Research output: Contribution to journalArticleResearchpeer-review

  23. Published

    Metallographische Präparation von Wolfram und Wolframlegierungen zur Gefügeuntersuchung mittels licht- und rasterelektronenmikroskopischer Methoden

    Jedlicka, C., Pölzl, S., Hawranek, G., Leitner, H., Clemens, H., Stickler, R., Hoffmann, A. & Knabl, W., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 371-378

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  24. Published

    Microstructural design of hard coatings

    Mayrhofer, P. H., Mitterer, C., Hultman, L. & Clemens, H., 2006, In: Progress in materials science. 51, p. 1032-1114

    Research output: Contribution to journalArticleResearchpeer-review

  25. Published

    Microstructural evolution of Cr-Mn-N Austenitic Steels during Cold Work Hardening

    Saller, G., Spiradek-Hahn, K., Scheu, C. & Clemens, H., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 427, p. 246-254

    Research output: Contribution to journalArticleResearchpeer-review

  26. Published

    Microstructure and Mechanical Properties of a C/C-Copper Joint Developed for Plasma Facing Components

    Eidenberger, E., Scheu, C., Hawranek, G., Pippan, R., Schedler, B., Leitner, H. & Clemens, H., 2006, In: Advanced engineering materials. 8, p. 1092-1096

    Research output: Contribution to journalArticleResearchpeer-review

  27. Published

    Microstructure and Texture Formation during Hot Rolling of Nb-Rich Gamma TiAl Alloys with Different C Contents

    Stark, A., Bartels, A., Gerling, R., Schimansky, F.-P. & Clemens, H., 2006, In: Advanced engineering materials. p. 1101-1108

    Research output: Contribution to journalArticleResearchpeer-review

  28. Published

    Mikrostruktur einer C/C-Cu Verbindung für Erste Wand Komponenten des Iter

    Eidenberger, E., Scheu, C., Hawranek, G., Pippan, R., Schedler, B., Leitner, H. & Clemens, H., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 525-530

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  29. Published

    Neutronenkleinwinkelstreuung an ausscheidungsgehärteten Stählen

    Eidenberger, E., Bischof, M., Staron, P., Erlach, S. D., Leitner, H., Scheu, C. & Clemens, H., 2006.

    Research output: Contribution to conferencePosterResearchpeer-review

  30. Published

    Numeric Modeling of the Deformation Behaviour of g-TiAl Based Alloys with Lamellar Microstructures

    Schaden, T., Fischer, F. D., Clemens, H., Appel, F. & Bartels, A., 2006, In: Advanced engineering materials. 8, p. 1109-1113

    Research output: Contribution to journalArticleResearchpeer-review

  31. Published

    On the Development of Grain Growth Resistant Tantalum Alloys

    Bischof, M., Mayer, S., Leitner, H., Clemens, H., Staron, P., Geiger, E., Voiticek, A. & Knabl, W., 2006, In: International journal of refractory metals & hard materials. 24, p. 437-444

    Research output: Contribution to journalArticleResearchpeer-review

  32. Published

    On the texture of spray formed gamma titanium aluminide

    Staron, P., Bartels, A., Brokmeier, H.-G., Gerling, R., Schimansky, F.-P. & Clemens, H., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 416, p. 11-17

    Research output: Contribution to journalArticleResearchpeer-review

  33. Published

    Phase Transformations in High Niobium and Carbon Containing g-TiAl Based Alloys

    Chladil, H., Clemens, H., Leitner, H., Bartels, A., Gerling, R., Schimansky, F. P. & Kremmer, S., 2006, In: Intermetallics. 14, p. 1194-1198

    Research output: Contribution to journalArticleResearchpeer-review

  34. Published

    Phase Transitions and Recrystallization in a Ti-46at%Al-9at%Nb Alloy as Observed by In-situ High-Energy X-ray Diffraction

    Liss, K.-D., Clemens, H., Bartels, A., Stark, A. & Buslaps, T., 2006.

    Research output: Contribution to conferencePosterResearchpeer-review

  35. Published

    Recrystallisation and Phase Transitions in a g-TiAl Based Alloy as Observed by ex- and in-situ High-energy X-ray Diffraction

    Liss, K.-D., Bartels, A., Clemens, H., Bystrzanowski, S., Stark, A., Buslaps, T., Schimansky, F.-P., Gerling, R., Scheu, C. & Schreyer, A., 2006, In: Acta materialia. 54, p. 3721-3735

    Research output: Contribution to journalArticleResearchpeer-review

  36. Published

    Short-time heat treatment of high-speed steels

    Leitner, H., Caliskanoglu, D., Vrtacnik, K. & Clemens, H., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 119-126

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  37. Published

    Spin Configurations in Strained Magnetic EuSe/PbSe1-xTex Superlattices Grown by Molecular Beam Epitaxy

    Lechner, R. T., Springholz, G., Schülli, T. U., Stangl, J., Schwarzl, T., Lott, D., Leiner, V., Schreyer, A., Clemens, H. & Bauer, G., 2006, In: Physica E: Low-dimensional systems & nanostructures. 32, p. 379-382

    Research output: Contribution to journalArticleResearchpeer-review

  38. Published

    Structure Models of Massively Transformed High Niobium Containing TiAl

    Scheu, C., Cha, L., Sturm, S., Chladil, H., Mayrhofer, P. H., Clemens, H., Bartels, A., Wolf, W. & Podloucky, R., 2006.

    Research output: Contribution to conferencePosterResearchpeer-review

  39. Published

    Texture evolution of the gamma- and the a/a2-phase during hot rolling of gamma-TiAl based alloys

    Schillinger, W., Bartels, A., Gerling, R., Schimansky, F.-P. & Clemens, H., 2006, In: Intermetallics. 14, p. 336-347

    Research output: Contribution to journalArticleResearchpeer-review

  40. Published

    The High-temperature Background in Intermetallic Alloys

    Weller, M., Clemens, H. & Haneczok, G., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 442, p. 138-141

    Research output: Contribution to journalArticleResearchpeer-review

  41. Published

    Unterschiedliche lamellare Gefügetypen in intermetallischen TiAl-Legierungen

    Schnitzer, R., Chladil, H., Scheu, C., Clemens, H., Bystrzanowski, S., Bartels, A. & Kremmer, S., 2006, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 59-66

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  42. Published

    Werkstoffcharakterisierung mittel dreidimensionaler Atomsonde

    Leitner, H. & Clemens, H., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 199-204

    Research output: Contribution to journalArticleResearchpeer-review

  43. Published

    Workshop "Neue Trends in der Entwicklung und Anwendung von intermetallischen Titanaluminiden" - Bericht 3

    Clemens, H., 2006

    Research output: Book/ReportCommissioned reportTransferpeer-review

  44. 2005
  45. Published

    1st Autumn School "Engineering Materials Science with Neutrons and Synchrotron Radiation"

    Schreyer, A., Reimers, W., Wroblewski, T., Haibel, A., Pyzalla, A. & Clemens, H., 2005, In: Advanced engineering materials. 7, p. 980-981

    Research output: Contribution to journalArticleResearchpeer-review

  46. Published

    51. Metallkunde-Kolloquium - Abstractband

    Clemens, H. (Editor) & Kneißl, A. (Editor), 2005, Eigenverlag.

    Research output: Book/ReportAnthologyResearch

  47. Published

    An advanced approach to the characterization of precipitates in tool steels

    Bischof, M. A., Erlach, S. D., Staron, P., Leitner, H. & Clemens, H., 2005, Proc. Solid-Solid Phase Transformations in Inorganic Materials. TMS, p. 8-8

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  48. Published

    Analysis of the Precipitation Behaviour in a High Speed Steel with Small Angle Neutron Scattering

    Leitner, H., Staron, P., Clemens, H., Marsoner, S. & Warbichler, P., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 398, p. 323-331

    Research output: Contribution to journalArticleResearchpeer-review

  49. Published

    A Study of the Deformation Behavior of Lamellar g-TiAl by Numeric Modeling

    Schaden, T., Fischer, F. D., Clemens, H., Appel, F. & Bartels, A., 2005, Intergrative and Interdisciplinary Aspects of Intermetallics. Materials Research Society : MRS, p. S6.7.1-S6.7.6

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  50. Published

    A study of the deformation behavior of lamellar γ-TiAl by numeric modeling

    Schaden, T., Fischer, F. D., Clemens, H., Appel, F., Bartels, A. & Dehm, G., 2005, Materials Research Society Symposium Proceedings 842. Materials Research Society : MRS, p. 6.7.1-6.7.6

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  51. Published

    Characterization of Residual Stresses in Compressor Discs for Aeroengines: Neutron Diffraction and Finite Element Simulations

    Cihak, U., Stockinger, M., Staron, P., Tockner, J. & Clemens, H., 2005, Superalloys 718, 625, 706 and Derivatives 2005. p. 517-526

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  52. Published

    Charakterisierung von hochniobhältigen Titanaluminid Legierungen

    Chladil, H., Clemens, H. & Leitner, H., 2005

    Research output: Book/ReportCommissioned reportTransferpeer-review