Helmut Antrekowitsch

101 - 150 out of 577Page size: 50

Research output

  1. 2019
  2. Published

    Recycling of aluminium with variation of the scrap processing techniques

    Wibner, S. & Antrekowitsch, H., 24 Jun 2019.

    Research output: Contribution to conference › Paper › peer-review

  3. Published

    Scrap processing in Al recycling

    Wibner, S. & Antrekowitsch, H., 24 Jun 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Reduktionsversuche von Rotschlamm im Großmaßstab

    Wibner, S. & Antrekowitsch, H., 31 May 2019

    Research output: Book/Report › Commissioned report › Research

  5. Published

    FFG-Endbericht Prozessoptimierung

    Wibner, S. & Antrekowitsch, H., 2019

    Research output: Book/Report › Commissioned report › Research

  6. 2018
  7. Published

    Conditioning of Spent Stripping Solution for the Recovery of Metals

    Ebner, T., Luidold, S., Honner, M., Antrekowitsch, H. & Czettl, C., 25 Sept 2018, In: Metals : open access journal . 8.2018, 10, 13 p., 757.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Effects of zinc addition on microstructure of SnCu3.5Ni0.3 alloy

    Scheiber, S. & Antrekowitsch, H., 4 May 2018, Conference Proceedings of the 25th International Student’s Day of Metallurgy. p. 181-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Analyse von Al-Cu-Briketts der Fa. Saubermacher Dienstleistungs AG

    Wibner, S. & Antrekowitsch, H., 2018

    Research output: Book/Report › Commissioned report › Research

  10. Published

    Der Weg vom Müllverbrennungsrückstand zum Sekundärrohstoff

    Pfandl, K., Höllen, D., Zöhrer, M., Pomberger, R. & Antrekowitsch, H., 2018, Österreichische Abfallwirtschaftstagung 2018: TrenntWende. Ö. (ed.).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    FFG-Bericht Prozessoptimierung

    Wibner, S. & Antrekowitsch, H., 2018

    Research output: Book/Report › Commissioned report › Research

  12. Published

    Reduktionsversuche von Rotschlamm unter Einstellung einer gewünschten Schlackenzusammensetzung

    Wibner, S., Antrekowitsch, H. & Scheiber, S., 2018

    Research output: Book/Report › Commissioned report › Research

  13. 2017
  14. Published

    CuCr(Zr)-Legierungen: Kurzstudie

    Scheiber, S. & Antrekowitsch, H., 27 Nov 2017, 14 p.

    Research output: Book/Report › Other report › Research

  15. Published

    Cu-Proben: Kurzanalyse

    Scheiber, S. & Antrekowitsch, H., 27 Nov 2017, 15 p.

    Research output: Book/Report › Commissioned report › Research

  16. Published

    Einfluss des Elementgehalts auf die Härte von Rotguss

    Fauland, L., Scheiber, S. (Reviewer) & Antrekowitsch, H. (Reviewer), 8 Nov 2017, 59 p.

    Research output: Other contribution › Education › peer-review

  17. Published

    Bleifreie Legierungen als Lagerwerkstoffe

    Nurschinger, S., Scheiber, S. (Reviewer) & Antrekowitsch, H. (Reviewer), 7 Nov 2017, 43 p.

    Research output: Other contribution › Research

  18. Published

    Tastversuche zur metallurgischen Aufarbeitung von Rotschlamm

    Scheiber, S. & Antrekowitsch, H., 19 Sept 2017, 68 p.

    Research output: Book/Report › Commissioned report › Research

  19. Published

    Tastversuche zur pyrometallurgischen Verarbeitung von Pflanzen

    Scheiber, S. & Antrekowitsch, H., 19 Sept 2017, 62 p.

    Research output: Book/Report › Commissioned report › Research

  20. Published

    Investigation on phase formation in tin alloys

    Scheiber, S. & Antrekowitsch, H., 25 Jun 2017, Proceedings of European Metallurgical Conference EMC 2017. p. 377–387 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Zwischenbericht 3. Projektjahr InnoAlloy: Projektstand – NEM

    Scheiber, S., Angerer, T. & Antrekowitsch, H., 21 Apr 2017, 5 p.

    Research output: Book/Report › Commissioned report › Research

  22. Published

    Continuous hot dip galvanizing – Process chain and materials simulation

    Scheiber, S. & Antrekowitsch, H., 9 Feb 2017, 100 p.

    Research output: Book/Report › Commissioned report › Research

  23. Published

    Abschlussbericht zur Entwicklung einer Aufarbeitungstechnologie für Salzschlacken

    Angerer, T. & Antrekowitsch, H., 30 Jan 2017, 42 p.

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Analyse der Aluminium-Schrottproben der Fa. Müller Guttenbrunn GmbH

    Wibner, S. & Antrekowitsch, H., 2017

    Research output: Book/Report › Commissioned report › Research

  25. Published

    Effect of Interrupted Quenching on Al‐Zn‐Mg‐Cu Alloys

    Kolb, G., Antrekowitsch, H., Pöschmann, D., Uggowitzer, P. J. & Pogatscher, S., 2017, Light Metals 2017. p. 385–389

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Influence of Interrupted Quenching on microstructure and properties of 7xxx aluminium alloys

    Kolb, G., Antrekowitsch, H., Kremmer, T., Dumitraschkewitz, P., Uggowitzer, P. J., Pöschmann, D. & Pogatscher, S., 2017.

    Research output: Contribution to conference › Abstract › peer-review

  27. Published

    Phase formation in Co(Ru)-Zn diffusion couples

    Ebner, T., Luidold, S., Antrekowitsch, H., Storf, C. & Czettl, C., 2017. 1 p.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. 2016
  29. Published

    The importance of metal recycling for the sustainability of the metallurgical industry

    Antrekowitsch, H., 28 Nov 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  30. Published

    Konditionierung und Recycling aluminiumhaltiger Reststoffe minderer Qualität

    Zöhrer, M., Antrekowitsch, H. & Duspiva, F., Nov 2016, Recy&DepoTech 2016. p. 129-134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Hardening of Al-Mg-Si alloys: Effect of trace elements and prolonged natural aging

    Werinos, M., Antrekowitsch, H., Ebner, T., Prillhofer, R., Uggowitzer, P. & Pogatscher, S., 5 Oct 2016, In: Materials & design. 107.2016, 5 October, p. 257-268 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Recycling of Mo-containing Materials – Challenges for the Future

    Antrekowitsch, H., Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  33. E-pub ahead of print

    Design strategy for controlled natural aging in Al–Mg–Si alloys

    Werinos, M., Antrekowitsch, H., Ebner, T., Prillhofer, R., Curtin, W. A., Uggowitzer, P. & Pogatscher, S., 4 Aug 2016, (E-pub ahead of print) In: Acta materialia. 118.2016, 1 October, p. 296-305 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Differential Scanning Calorimetry and Thermodynamic Predictions: A Comparative Study of Al-Zn-Mg-Cu Alloys

    Kolb, G., Scheiber, S., Antrekowitsch, H., Uggowitzer, P., Pöschmann, D. & Pogatscher, S., 3 Aug 2016, In: Metals : open access journal . 6.2016, 8, 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Analyse von Eloxierschichten hinsichtlich verringerter Haftung auf Gehäuse-, Deckel- sowie Rohmaterial

    Scheiber, S., Schlögl, C. & Antrekowitsch, H., 26 Apr 2016, 93 p.

    Research output: Book/Report › Commissioned report › Research

  36. Published

    Energie- und Ressourceneffizienz beim Recycling von Metallen

    Antrekowitsch, H., 21 Apr 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  37. Published

    Metallrecycling

    Antrekowitsch, H., 8 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  38. Published

    Werkstoffentwicklung bleifreier Messinglegierungen (Teil 3/3)

    Angerer, T., Hofer, S. & Antrekowitsch, H., 1 Apr 2016, In: Metall. 70, 4, p. 136-142

    Research output: Contribution to journal › Article › Research

  39. Published

    Aktivlote beim Targetbonding

    Hangler, T., Pretterhofer, S., Stöckl, M., Scheiber, S. (Reviewer) & Antrekowitsch, H. (Reviewer), 16 Mar 2016, 150 p.

    Research output: Other contribution › Education › peer-review

  40. Published

    Rohstoffe sind Zukunft

    Antrekowitsch, H., 1 Mar 2016

    Research output: Non-textual form › Exhibition › Education

  41. Published

    Einfluss Verstrecken und Stabilisieren auf die Kaltaushärtung in 6016 und 6063

    Werinos, M. & Antrekowitsch, H., 24 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  42. Published

    Dickenmessungen der Eloxierschicht auf Kupplungskolben aus EN AW-2007

    Scheiber, S. & Antrekowitsch, H., 11 Feb 2016

    Research output: Book/Report › Commissioned report › Research

  43. Published

    A comparative study of CALPHAD and differential scanning calorimetry to optimize 7xxx aluminum alloys

    Kolb, G., Antrekowitsch, H., Uggowitzer, P., Pöschmann, D. & Pogatscher, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  44. Published

    Comparative study of thermodynamic predictions and differential scanning calorimetry for Al-Zn-Mg-Cu alloys

    Kolb, G., Antrekowitsch, H., Uggowitzer, P., Pöschmann, D. & Pogatscher, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  45. Published

    Effect of Interrupted Quenching on Al-Zn-Mg-Cu alloys

    Kolb, G., Antrekowitsch, H., Uggowitzer, P., Pöschmann, D. & Pogatscher, S., 2016.

    Research output: Contribution to conference › Abstract › peer-review

  46. Published

    FFG-Endbericht: Agglomeration und schmelzmetallurgische Verwertung von metallhaltigen Reststoffen

    Zöhrer, M., Antrekowitsch, H. & Angerer, T., 2016

    Research output: Book/Report › Commissioned report › Research

  47. Published

    New preparation and recycling procedure to recover rare earth elements from magnets by using a closed loop treatment

    Stuhlpfarrer, P., Luidold, S., Schnideritsch, H. & Antrekowitsch, H., 2016, In: Transactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy. 125, 4, p. 204-210

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Recycling of waste printed circuit boards with simultaneous enrichment of special metals by using alkaline melts: A green and strategically advantageous solution

    Stuhlpfarrer, P., Luidold, S. & Antrekowitsch, H., 2016, In: Journal of Hazardous Materials. 307, p. 17-25

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Trace element-added Al-Mg-Si alloys

    Pogatscher, S., Werinos, M., Antrekowitsch, H. & Uggowitzer, P., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  50. Published

    Ultrafast artificial aging of Al-Mg-Si alloys

    Werinos, M., Antrekowitsch, H., Kozeschnik, E., Ebner, T., Löffler, J. F., Uggowitzer, P. & Pogatscher, S., 2016, In: Scripta materialia. 112, p. 148-151

    Research output: Contribution to journal › Article › Research › peer-review

  51. 2015
  52. Published

    Projektpräsentation - Einfluss von Mikrolegierungselementen auf das Ausscheidungsverhalten von Aluminiumlegierungen

    Werinos, M. & Antrekowitsch, H., 18 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  53. Published

    Neue Generation bleifreier Kuper-Zink-Legierungen auf Kupfer-Silizium-Mangan-Basis

    Angerer, T., Hofer, S. & Antrekowitsch, H., 1 Nov 2015, In: Metall. 69, 11, p. 431-435

    Research output: Contribution to journal › Article › Research

  54. Published

    Aktuelle Entwicklungstrends und zukünftige Herausforderungen im Bereich der Nichteisenmetallurgie

    Antrekowitsch, H., Luidold, S., Antrekowitsch, J., Pogatscher, S. & Steinlechner, S., 30 Oct 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160.2015, 11, p. 495-500 6 p.

    Research output: Contribution to journal › Article › Research

  55. Published

    Electrochemical and microstructural characteristics of 3xxx based interlayers in high strength brazing sheets

    Kremmer, T. & Antrekowitsch, H., 8 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

Previous 1 2 3 4 5 6 7 8 ...12 Next
View graph of relations

Contact

Phone: 7300

Latest Research Output

View more (577)