Harald Harmuth

1 - 100 out of 295Page size: 100

Research output

  1. 2025
  2. Published

    Application of coupled CFD-DEM modelling in erosion study of cohesive materials: A case study of rotating finger test

    Rahimilarki, M., Burhanuddin, B., Vollmann, S., Jin, S. & Harmuth, H., 23 Jan 2025, In: Results in Engineering. 25.2025, March, 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2024
  4. Published

    Erosion Behavior of Coarse-Grained Alumina in Corrosive Melts: Experimental and Computational Studies with CAS and CASM Slags

    Guarco, J., Vollmann, S., Harmuth, H. & Burhanuddin, B., 19 Nov 2024.

    Research output: Contribution to conference › Paper › peer-review

  5. Published

    Creep strain recovery of a refractory castable under loading/unloading conditions

    Gruber, D., Akbari, B. & Harmuth, H., 18 Sept 2024, Proceedings of International Colloquium on Refractories: ICR 2024.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Effect of Slag Basicity on Alumina Dissolution and Diffusivity: A High-temperature Confocal Laser Scanning Microscopy Study

    Burhanuddin, B. & Harmuth, H., 15 Jun 2024, In: China's refractories. 33.2024, 2, p. 27-34 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    Determining the critical Reynolds number for suppressing Marangoni convection of alumina in silicate melt

    Burhanuddin, B., Harmuth, H. & Vollmann, S., 29 Feb 2024, (E-pub ahead of print) In: Ceramics International : CI. 50.2024, 11 Part A, p. 18323-18328 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    A Modified Rotating-Finger Test Aiming to Quantify Refractory Wear Based on Fundamental Equations Governing Refractory Dissolution and Erosion

    Burhanuddin, B. & Harmuth, H., 6 Feb 2024, Advances in Pyrometallurgy: Furnace Containment. Springer, p. 119-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. 2023
  10. Published

    Analyzing crack deflection behavior of refractories by digital image correlation

    Fruhstorfer, J., Gruber, D. & Harmuth, H., 12 Sept 2023, In: AIP Conference Proceedings. 2894, 1, 020002.

    Research output: Contribution to journal › Conference article › peer-review

  11. Published

    Dissolution of Magnesia in Silicate Melts and Diffusivity Determination from CLSM Studies

    Burhanuddin, B. & Harmuth, H., 21 Jul 2023, In: Applied Sciences : open access journal. 13.2023, 14, p. 8458 8 p., 8458.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Calculation of mass transfer for rotating finger test equipment

    Burhanuddin, B., Harmuth, H. & Guarco, J., 4 Jul 2023.

    Research output: Contribution to conference › Presentation › Research

  13. E-pub ahead of print

    Creep strain recovery of an in situ spinel-forming refractory castable under loading/unloading compressive creep conditions

    Akbari, B., Gruber, D., Jin, S. & Harmuth, H., 17 May 2023, (E-pub ahead of print) In: Ceramics International. 49.2023, 15, p. 25225-25231 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. E-pub ahead of print

    Anisotropy of fracture mechanical properties of carbon-containing refractories and its impact on cracking in a steel ladle lining

    Gruber, D., Schachner, S. & Harmuth, H., 2 May 2023, (E-pub ahead of print) In: Open ceramics. 14.2023, June, 5 p., 100363.

    Research output: Contribution to journal › Article › Research › peer-review

  15. 2022
  16. Published

    Quantification of Magnesia Dissolution in Silicate Melts and Diffusivity Determination Using Rotating Finger Test

    Burhanuddin, B., Harmuth, H. & Vollmann, S., 13 Dec 2022, In: Applied Sciences : open access journal. 12.2022, 24, 13 p., 12791.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Method for inverse calculation of erosion parameters in slag-refractory systems

    Guarco, J., Vollmann, S., Harmuth, H. & Burhanuddin, B., Dec 2022, In: Materials Today Communications. 33.2022, December, 10 p., 104736.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Influence of the Fine Fraction and Sintering on Selected Isotropic and Anisotropic Bulk Properties of Uniaxial Compacts

    Fruhstorfer, J., Wagner, M., Gruber, D. & Harmuth, H., 14 Sept 2022, In: Interceram. 71.2022, September, p. 38-47 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. E-pub ahead of print

    Zirconium oxycarbides and oxycarbonitrides: A review

    Kucheryavaya, A., Lenčéš, Z., Šajgalík, P. & Harmuth, H., 30 Aug 2022, (E-pub ahead of print) In: International journal of applied ceramic technology. 20.2023, 2, p. 541-562 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. E-pub ahead of print

    Sherwood correlation for finger-test experiments

    Guarco, J., Burhanuddin, Vollmann, S. & Harmuth, H., 27 Aug 2022, (E-pub ahead of print) In: Results in Engineering. 15.2022, September, 5 p., 100610.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Creep characterization and modelling of ordinary refractory ceramics under combined compression and shear loading conditions

    Schachner, S., Jin, S., Gruber, D. & Harmuth, H., 1 Aug 2022, In: Ceramics International. 48.2022, 15, p. 21101-21109 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Mixed-mode fracture behaviour of refractories with asymmetric wedge splitting test: Part II: Experimental case study

    Dai, Y. J., Jin, S., Zhou, R., Li, Y. W., Harmuth, H. & Tschegg, E. K., 15 Jul 2022, In: Ceramics International. 48.2022, 14, p. 19757-19766 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Mixed-mode fracture behaviour of refractories with asymmetric wedge splitting test: Part I: Numerical implementation and validation

    Dai, Y., Jin, S., Li, Y. W., Wang, Q., Zhou, W. & Harmuth, H., 15 Jul 2022, In: Ceramics International. 48.2022, 14, p. 19767-19775 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Corrigendum to “Asymmetric creep modeling of common refractory ceramics with high temperature wedge splitting test” [Eng. Fract. Mech. 25 (2021) 107819

    Jin, S. & Harmuth, H., Jul 2022, 1 p.

    Research output: Other contribution › Research

  25. Published

    Contributions to Crack Propagation in Coarse Grained Refractories

    Gruber, D. & Harmuth, H., 22 Jun 2022.

    Research output: Contribution to conference › Presentation › Research

  26. Published

    Discrete element modelling of ordinary refractory ceramics under cold crushing testing: Influence of minimum element size

    Du, W., Jin, S., Emam, S., Gruber, D. & Harmuth, H., 15 Jun 2022, In: Ceramics International. 48.2022, 12, p. 17934-17941 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Evaluation of CLSM measurements for dissolution studies: A case study investigating alumina dissolution in a silicate slag

    Harmuth, H. & Burhanuddin, B., 14 Jun 2022, In: Ceramics International. 48.2022, 19 Part A, p. 28174-28180 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Method for determination of mass transfer coefficients for dissolution of dense ceramics in liquid slags

    Guarco, J., Harmuth, H. & Vollmann, S., 1 May 2022, In: International journal of heat and mass transfer. 186.2022, 1 May, 11 p., 122494.

    Research output: Contribution to journal › Article › Research › peer-review

  29. E-pub ahead of print

    Thermomechanical finite element modeling of steel ladle containing alumina spinel refractory lining

    Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 1 Apr 2022, (E-pub ahead of print) In: Finite elements in analysis and design. 206.2022, 1 September, 10 p., 103762.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Method for determination of effective binary diffusivities in dissolution of dense ceramic materials

    Guarco, J., Burhanuddin, B., Vollmann, S. & Harmuth, H., 15 Mar 2022, In: Ceramics International.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Application of an improved testing device for the study of alumina dissolution in silicate slag

    Burhanuddin, B., Guarco, J., Harmuth, H. & Vollmann, S., 2 Mar 2022, In: Journal of the European Ceramic Society. 42.2022, 8, p. 3652-3659 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Investigation of three-stage compressive creep of a spinel forming refractory castable containing 8% MgO

    Akbari, B., Gruber, D., Jin, S. & Harmuth, H., 1 Feb 2022, In: Ceramics International : CI. 48.2022, 3, p. 3287-3292 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Significance of an inclined plane test for mould slag assessment

    Marschall, I., Harmuth, H. & Kircher, V., Jan 2022, In: Metallurgia Italiana. 2022, 1, p. 14-22 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Application of Artificial Neural Network to Predict the Thermal and Thermomechanical Behavior of Refractory Linings

    Hou, A., Jin, S., Gruber, D. & Harmuth, H., 2022, 2022 International Joint Conference on Neural Networks, IJCNN 2022 - Proceedings. Institute of Electrical and Electronics Engineers, (Proceedings of the International Joint Conference on Neural Networks; vol. 2022-July).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    DETERMINATION OF SECONDARY CREEP STAGE PARAMETERS OF SHAPED ALUMINA SPINEL REFRACTORY WITH AID OF GENETIC ALGORITHM

    Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 2022.

    Research output: Contribution to conference › Paper › peer-review

  36. 2021
  37. Published

    Significance of an inclined plane test for mould slag assessment

    Marschall, I., Harmuth, H. & Kircher, V., 20 Oct 2021, Proceedings of the 10th European Conference on Continuous Casting. Mailand: Associazione Italiana di Metallurgia, 9 p. CC_017

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Significance of an inclined plane test for mould slag assessment

    Marschall, I. & Harmuth, H., 20 Oct 2021.

    Research output: Contribution to conference › Presentation › Research

  39. Published

    Application of liquid-liquid mass transfer for a steel ladle

    Doletschek, M., Vollmann, S. & Harmuth, H., 6 Oct 2021, STEELSIM 2021, 9th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking-STEELSIM2021. p. 8 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Combined damaged elasticity and creep modeling of ceramics with wedge splitting tests

    Samadi, S., Jin, S. & Harmuth, H., 15 Sept 2021, In: Ceramics International. 47.2021, 18, p. 25846-25853 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Phase formation in MgO-C refractories with different antioxidants

    Atzenhofer, C. & Harmuth, H., 27 Aug 2021, In: Journal of the European Ceramic Society. 41.2021, 14, p. 7330-7338 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Asymmetric creep modeling of common refractory ceramics with high temperature wedge splitting test

    Jin, S. & Harmuth, H., Jul 2021, In: Engineering Fracture Mechanics. 252.2021, July, 12 p., 107819.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Investigation of calcium-aluminate-based mold flux of different compositions

    Marschall, I. & Harmuth, H., 10 Jun 2021, In: Steel research international. 93.2022, 3, 8 p., 2100187.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    A comparison of two damage models for inverse identification of mode I fracture parameters: Case study of a refractory ceramic

    Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 1 May 2021, In: International Journal of Mechanical Sciences. 197, 1 May, 9 p., 106345.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Design, operation and evaluation of an improved refractory wear testing technique

    Kircher, V., Burhanuddin & Harmuth, H., 17 Apr 2021, In: Measurement. 178.2021, June, 9 p., 109429.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Investigation of Calcium Aluminate based Mold Slag Compositions

    Harmuth, H. & Marschall, I., 21 Feb 2021.

    Research output: Contribution to conference › Presentation › Research

  47. 2020
  48. Published

    Creep Parameter Determination of a Shaped Alumina Spinel Refractory Using Statistical Analysis

    Samadi, S., Teixeira, L., Jin, S., Gruber, D. & Harmuth, H., Sept 2020.

    Research output: Contribution to conference › Paper

  49. E-pub ahead of print

    R-curves determination of ordinary refractory ceramics assisted by digital image correlation method

    Dai, Y., Harmuth, H., Jin, S., Gruber, D. & Yawei, L., 20 May 2020, (E-pub ahead of print) In: Journal of the European Ceramic Society. 40.2020, 13, p. 4655-4663 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Statistical study of compressive creep parameters of an alumina spinel refractory

    Samadi, S., Jin, S., Gruber, D., Harmuth, H. & Schachner, S., 1 Mar 2020, In: Ceramics International : CI. 46.2020, 10A, p. 14662-14668 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Mechanical and fracture investigation of magnesia refractories with acoustic emission-based method

    Dai, Y., Yawei, L., Jin, S., Harmuth, H., Yan, W. & Xu, X., Jan 2020, In: Journal of the European Ceramic Society. 40.2020, 1, p. 181-191 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. 2019
  53. Published

    Fracture behaviour of magnesia refractory materials in tension with the Brazilian test

    Dai, Y., Li, Y., Xu, X., zhu, Q., Yan, W., Jin, S. & Harmuth, H., Dec 2019, In: Journal of the European Ceramic Society. 39.2019, 16, p. 5433-5441 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Thermomechanical Analysis of Purging Plugs by Applying Fluid–Solid Conjugate Heat Transfer Modeling

    Tan, F., He, Z., Jin, S., Cai, H., Li, B., Li, Y. & Harmuth, H., 1 Nov 2019, In: Steel research international. 90.2019, 11, 9 p., 1900213.

    Research output: Contribution to journal › Article › Research › peer-review

  55. E-pub ahead of print

    Fracture behavior of magnesia refractory materials under combined cyclic thermal shock and mechanical loading conditions

    Dai, Y., Li, Y., Jin, S., Harmuth, H. & Xu, X., 17 Oct 2019, (E-pub ahead of print) In: Journal of the American Ceramic Society. 103.2020, 3, p. 1956-1969 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    A method for steel ladle lining optimization applying thermomechanical modelling and Taguchi approaches

    Jin, S., Hou, A., Harmuth, H. & Gruber, D., 16 Oct 2019, Proceedings of UNITECR 2019: 16th Biennial Worldwide Congress. Yokohama, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Contributions to refractories creep characterisation

    Gruber, D., Jin, S., Schachner, S., Stückelschweiger, M. & Harmuth, H., 16 Oct 2019, Proceedings of UNITECR'19. Yokohama, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Contributions to refractories creep characterisation

    Gruber, D., Jin, S., Schachner, S., Stückelschweiger, M. & Harmuth, H., 16 Oct 2019.

    Research output: Contribution to conference › Presentation › Research

  59. Published

    TOWARDS THE PREDICTION OF REFRACTORY EROSION BY LIQUID SLAGS AND METAL

    Leitold, C., Harmuth, H. & Vollmann, S., 26 Sept 2019, Supplier Industries enabling REFRACTORIES. p. 163-166 194 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Wedge-Splitting Test on Carbon-Containing Refractories at High Temperatures

    Stückelschweiger, M., Gruber, D., Jin, S. & Harmuth, H., 8 Aug 2019, In: Applied Sciences : open access journal. 9.2019, 16, 10 p., 3249.

    Research output: Contribution to journal › Article › Research › peer-review

  61. E-pub ahead of print

    Automated break temperature determination of mould slags for the continuous casting of steel based on temperature-dependent viscosity data

    Kölbl, N. & Harmuth, H., 25 Jul 2019, (E-pub ahead of print) In: Ironmaking and steelmaking. 47.2019, 8, p. 899-902 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Influence of Variation/Response Space Complexity and Variable Completeness on BP-ANN Model Establishment: Case Study of Steel Ladle Lining

    Hou, A., Jin, S., Gruber, D. & Harmuth, H., 16 Jul 2019, In: Applied Sciences : open access journal. 9.2019, 14, 12 p., 2835.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Modelling of a steel ladle and prediction of its thermomechanical behavior by finite element simulation together with artificial neural network approaches

    Hou, A., Jin, S., Gruber, D. & Harmuth, H., 4 Jul 2019, p. 1109 - 1116. 7 p.

    Research output: Contribution to conference › Paper

  64. Published

    A method to characterize asymmetrical three-stage creep of ordinary refractory ceramics and its application for numerical modelling

    Schachner, S., Jin, S., Gruber, D. & Harmuth, H., 6 Jun 2019, In: Journal of the European Ceramic Society. 39.2019, 14, p. 4384-4393 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Thermal and Thermomechanical Responses Prediction of a Steel Ladle Using a Back-Propagation Artificial Neural Network Combining Multiple Orthogonal Arrays

    Hou, A., Jin, S., Harmuth, H. & Gruber, D., 29 Apr 2019, In: Steel research international. 2019, 8 p., 1900116.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Creep testing of carbon containing refractories under reducing conditions

    Stückelschweiger, M., Gruber, D., Jin, S. & Harmuth, H., 4 Feb 2019, In: Ceramics International : CI. 45.2019, 8, p. 9776-9781 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    High-temperature investigation of mould slag crystallization by single and double hot thermocouple techniques

    Kölbl, N., Marschall, I. & Harmuth, H., 2019, In: Journal of iron and steel research international. 26.2019, 4, p. 345-354 9 p.

    Research output: Contribution to journal › Review article › peer-review

  68. Published

    Identification of secondary raw materials in mold powders and their melting behavior

    Marschall, I., Kölbl, N., Harmuth, H. & Atzenhofer, C., 2019, In: Journal of iron and steel research international. 26.2019, 4, p. 403-411 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Keramikfunde: Belege für den Beginn und die Entwicklung der Besiedelung im Bezirk Liezen

    Presslinger, H., Eibner, C., Harmuth, H. & Atzenhofer, C., 2019, In: Da schau her. 2019, 1, p. 16-20 5 p.

    Research output: Contribution to journal › Article › Research

  70. Published

    Naturwissenschaftliche Untersuchungsergebnisse der Klaubproben vom mittelbronzezeitlichen Kupfererzverhüttungsplatz Greithbauer/KG Trieben/OG Trieben

    Presslinger, H., Eibner, C., Harmuth, H. & Atzenhofer, C., 2019, In: Da schau her. 40.2019, 3, p. 18-21 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. 2018
  72. Published

    Effect of the phase transformation on fracture behaviour of fused silica refractories

    Dai, Y., Yin, Y., Xu, X., Jin, S., Li, Y. & Harmuth, H., 1 Dec 2018, In: Journal of the European Ceramic Society. 38, 16, p. 5601-5609 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Three stage creep behavior of MgO containing ordinary refractories in tension and compression

    Schachner, S., Jin, S., Gruber, D. & Harmuth, H., 13 Sept 2018, In: Ceramics International : CI.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    A Method for Steel Ladle Lining Optimization Applying Thermomechanical Modeling and Taguchi Approaches

    Hou, A., Jin, S., Harmuth, H. & Gruber, D., 9 Aug 2018, In: JOM. 70, 11, p. 2449 2456 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Thermomechanical modelling of a torpedo car by considering working lining spalling

    Jin, S., Harmuth, H., Gruber, D., Buhr, A., Sinnema, S. & Rebouillat, L., 17 Jul 2018, In: Ironmaking and steelmaking. 0301-9233, 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Modified DHTT Equipment for Crystallization Studies of Mold Slags

    Kölbl, N., Harmuth, H. & Marschall, I., 9 Apr 2018, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 2018, 49/4, p. 1898-1909 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    De-agglomeration rate of silicate bonded sand cores during core removal

    Stauder, B., Harmuth, H. & Schumacher, P., Feb 2018, In: Journal of materials processing technology. 252 (2018), 252, p. 652-658 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Advanced creep testing of refractories providing new insight into material behaviour

    Jin, S., Harmuth, H., Gruber, D., Schachner, S., Meunier, P. & Techer, R., 2018, In: Refractories worldforum. 10, 2, p. 63-67

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Advanced measures to characterize mechanical properties of refractories

    Jin, S., Harmuth, H., Gruber, D. & Sidi Mammar, A., 2018, In: China's refractories. 27, 1, p. 8-13

    Research output: Contribution to journal › Article › Research

  80. Published

    An improved Double Hot Thermocouple Technique for Mold Slag Investigation

    Kölbl, N., Marschall, I. & Harmuth, H., 2018, AISTech 2018: Proceedings of the Iron & Steel Technology Conference : 7-10 May 2018, Philadelphia, Pa., U.S.A..

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    APPLICATION OF A MODIFIED DOUBLE HOT THERMOCOUPLE TECHNIQUE FOR MOLD SLAGS

    Kölbl, N., Marschall, I., Kircher, V. & Harmuth, H., 2018, Proceedings of the 7th international congress on science and technology of steelmaking. Associazione Italiana di Metallurgia

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Investigation of Compressive Refractory Creep

    Jin, S. & Harmuth, H., 2018, In: China's refractories. 27, 3, p. 21-27 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Keramik aus der Franz-Josephs-Grotte in Unterzeiring: die naturwissenschaftliche Bewertung eines bronzezeitlichen Keramikwerkstoffes

    Preßlinger, H., Eibner, C., Harmuth, H. & Atzenhofer, C., 2018, In: Da schau her. 2018, 3, p. 16-18 3 p.

    Research output: Contribution to journal › Article › Research

  84. Published

    Thermal and thermomechanical evaluations of channel induction furnace applying strong insulation containing lightweight aggregate

    Jin, S., Harmuth, H. & Gruber, D., 2018, In: Ironmaking and steelmaking. 2018, 45, p. 514-518 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. 2017
  86. Published

    Determination of the fracture behaviour of MgO-refractories using multi-cycle wedge splitting test and digital image correlation

    Dai, Y., Gruber, D. & Harmuth, H., Dec 2017, In: Journal of the European Ceramic Society. 37.2017, 15, p. 5035-5043 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Fracture process zone development in a magnesia and a magnesia spinel refractory as observed by digital image correlation

    Gruber, D., Dai, Y. & Harmuth, H., 26 Sept 2017, Proceedings of UNITECR 2017: 26.9.2017-29.9.2017, Santiago de Chile, Chile. Santiago de Chile

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Modelling and inverse investigation of the fracture process for a magnesia spinel refractory using a heterogeneous continuum model

    Dai, Y., Gruber, D., Harmuth, H. & Jin, S., Sept 2017, In: Engineering Fracture Mechanics. 182.2017, September, p. 438-448 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Observation and quantification of the fracture process zone for two magnesia refractories with different brittleness

    Dai, Y., Gruber, D. & Harmuth, H., 1 Jun 2017, In: Journal of the European Ceramic Society. 37.2017, 6, p. 2521-2529 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Fracture behaviour and microstructure of refractory materials for steel ladle purging plugs in the system Al2O3-MgO-CaO

    Long, B., Xu, G., Buhr, A., Jin, S. & Harmuth, H., 26 Apr 2017, In: Ceramics International : CI. 43.2017, 13, p. 9679-9685 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Comparison of Cement- and Hydratable Alumina-Bonded Alumina-Spinel Materials for Steel Ladle Purging Plugs

    Long, B., Buhr, A., Jung, I.-H., Jin, S., Harmuth, H. & Dutton, J., 2017, In: Refractories worldforum. 9, 3, p. 93-106 14 p.

    Research output: Contribution to journal › Article › Research

  92. Published

    Composition and properties of a metakaolin-based geopolymer binder suitable for shaping using a slinger

    Harmuth, H. & Mairitsch, E., 2017, Construction and Building Materials. p. 277-283

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  93. Published

    Main wear mechanisms of SEN slag band materials

    Harmuth, H., Kircher, V. & Kölbl, N., 2017, In: China's refractories. 26.2017, 1, p. 1-7 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Phase formation in Al2O3-C refractories with Al addition

    Atzenhofer, C., Gschiel, S. & Harmuth, H., 2017, In: Journal of the European Ceramic Society. 37.2017, 4, p. 1805-1810 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Towards industrial vessel refractories lining design: a case study

    Jin, S., Harmuth, H. & Gruber, D., 2017.

    Research output: Contribution to conference › Paper

  96. 2016
  97. Published

    Assessment of thermal shock resistance by HMOR test with high heating rate

    Gruber, D., Sidi Mammar, A., Harmuth, H. & Grasset-Bourdel, R., 28 Sept 2016, 59th International Colloquium on Refractories - Refractories for Metallurgy. Aachen

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Advanced Measures to Characterize the Mechanical Properties of Refracrories

    Jin, S., Harmuth, H., Gruber, D. & Sidi Mammar, A., 20 Sept 2016, Proceedings of the 7th International Symposium on Refractories ISR 2016, Xi'an, China, September 20-22, 2016. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    Main Wear Mechanisms of SEN Slag Band Materials

    Harmuth, H., Kircher, V. & Kölbl, N., 20 Sept 2016, Proc. 7th International Conference on Refractories ISR 2016, Xi'an, China, September 20-22. p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Stability of Magnesia bricks under the conditions of steel degassing – a case study

    Harmuth, H., 18 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  101. Published

    Fundamental investigations for the design of fluorine free mold powder compositions

    Marschall, I., Yang, X. & Harmuth, H., 22 May 2016, Advances in Molten Slags, Fluxes, and Salts: Proceedings of the 10th International Conference on Molten Slags, Fluxes and Salts. Reddy, R. G., Chaubal, P., Pistorius, P. C. & Pal, U. (eds.). Seattle Washington USA, p. 299 306 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Enhanced mechanical performance of Al2O3-C refractories with nano carbon black and in-situ formed multi-walled carbon nanotubes (MWCNTs)

    Liao, N., Li, Y., Jin, S., Sang, S. & Harmuth, H., 1 Feb 2016, In: Journal of the European Ceramic Society. 36.2016, 3, p. 867-874 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  103. E-pub ahead of print

    Thermomechanical failure modeling and investigation into lining optimization for a Ruhrstahl Heraeus snorkel

    Jin, S., Gruber, D., Harmuth, H. & Rössler, R., 28 Jan 2016, (E-pub ahead of print) In: Engineering Failure Analysis. 62.2016, April, p. 254-262 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Tensile creep measurements of ordinary ceramic refractories at service related loads including setup, creep law, testing and evaluation procedures

    Sidi Mammar, A., Gruber, D., Harmuth, H. & Jin, S., 14 Jan 2016, In: Ceramics International : CI. 42.2016, 1 May, p. 6791-6799 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  105. 2015
  106. Published

    Simulation of micro-crack formation in a magnesia spinel refractory during the production process

    Fasching, C., Gruber, D. & Harmuth, H., 25 Aug 2015, In: Journal of the European Ceramic Society. 35, p. 4593-4601 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    Influence of creep on the thermomechanical behavior of a rh-snorkel

    Jin, S., Harmuth, H., Gruber, D. & Rössler, R., 1 Jan 2015.

    Research output: Contribution to conference › Paper › peer-review

  108. Published

    Assessment of thermal shock resistance by hmor test with high heating rate

    Sidi Mammar, A., Harmuth, H., Gruber, D. & Grasset-Bourdel, R., 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  109. Published

    Assessment of thermal shock resistance by HMOR test with high heating rate

    Sidi Mammar, A., Harmuth, H., Gruber, D. & Grasset-Bourdel, R., 2015, UNITECR 2015. Wien, 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  110. Published

    Creep Modeling of Magnesia-chromite Bricks in a RH Snorkel During a Process Cycle

    Jin, S., Harmuth, H., Gruber, D. & Roessler, R., 2015, In: China's refractories. 24, 1, p. 22-25

    Research output: Contribution to journal › Article › Research › peer-review

  111. Published

    Firing research for refractories in steel ladle applications

    Parr, C., Harmuth, H., Pandolfelli, V., Poirrier, J., Rigaud, M. & Sinnema, S., 2015, UNITECR 2015. 14th Biennial Worldwide Congress (ed.). Wien, 5 p. 239

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 Next
View graph of relations

Contact

Phone: 3200

Latest Research Output

View more (295)