Günter R. Langecker

51 - 100 out of 118Page size: 50

Research output

  1. 2009
  2. Published

    Advanced compounding: extrusion of polypropylene nanocomposites using the melt pump

    Kracalik, M., Laske, S., Gschweitl, M., Friesenbichler, W. & Langecker, G., 2009, In: Journal of Applied Polymer Science. 113, p. 1422-1428

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Advanced Compounding of Polymer Nanocomposites by assembling a melt pump

    Witschnigg, A., Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Advanced Compounding of Polymer Nanocomposites using a Melt Pump

    Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009, Proceedings of a Conference on Polyolefins and Polymelamines. p. 148-148

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Assessment of Material Properties during compounding of Polymer Nanocomposites using In-Line near Infrared Spectroscopy

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009, Proceedings of a Conference on Polyolefins and Polymelamines. p. 150-150

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Biopolymer Paper for Laser Printing Applications

    Laske, S., Piontek, M., Friesenbichler, W., Wallner, G., Achatz, P., Burkhalter, R. & Langecker, G., 2009, PPS-25 Program & Abstracts. p. 78-78

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Biopolymer Paper for Laser Printing Applications: 25th Annual Meeting of the Polymer Processing Society

    Langecker, G., Laske, S., Piontek, M., Friesenbichler, W., Wallner, G., Achatz, P. & Burkhalter, R., 2009

    Research output: Non-textual form › Web publication/site › Research

  8. Published

    Calculation of Residual Stresses in the Insert Molding Process Using the Finite Element Method

    Kisslinger, T., Fischer, K., Lucyshyn, T. & Langecker, G., 2009

    Research output: Non-textual form › Web publication/site › Research

  9. Published

    Characterization of the strain distribution around crack tips in unfilled and nanofilled polypropylene using in situ synchrotron small and wide angle scanning scattering techniques

    Feuchter, M., Maier, G., Zizak, I., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2009, EPF'09 european polymer congress. p. 120-120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Determination of hierarchical strains in intercalated clay-polypropylene nanocomposites

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2009, 2008 MRS Fall Meeting Symposium. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Estimation of reinforcement in compatibilized polypropylene nanocomposites by extensional rheology

    Laske, S., Kracalik, M., Gschweitl, M., Feuchter, M., Maier, G., Pinter, G., Thomann, R., Friesenbichler, W. & Langecker, G., 2009, In: Journal of Applied Polymer Science. 111, p. 2253-2259

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Estimation of reinforcement in compatibilized polypropylene nanocomposites by extensional rheology

    Laske, S., Kracalik, M., Gschweitl, M., Feuchter, M., Maier, G., Pinter, G., Thomann, R., Friesenbichler, W. & Langecker, G., 2009, In: VLK-News. 17. Jahrg., p. 6-8

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    FT-NIR as a determination method for reinforcement of polymer nanocomposites

    Laske, S., Kracalik, M., Feuchter, M., Pinter, G., Maier, G., Märzinger, W., Haberkorn, M. & Langecker, G., 2009, In: Journal of Applied Polymer Science. 114, p. 2488-2496

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Industrial Production of Polymer Nanocomposites

    Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G. & Langecker, G., 2009, APT09 - Advandes in Plastics Technology - Abstracts of Papers. p. 6-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    In-line characterization and quality control of PP nanocomposites using FT-NIR spectroscopy

    Witschnigg, A., Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    In-line quality control of polymer nanocomposites using near-infrared spectroscopy

    Laske, S., Witschnig, A., Kracalik, M., Feuchter, M., Pinter, G., Maier, G., Langecker, G. R. & Holzer, C., 2009, NANOCON 2009 - 1st International Conference, Conference Proceedings. p. 120-125

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Physical Model for the Expansion Injection Molding Process and Degradation Effects on the Injection Molded Parts due to Extreme Processing Conditions

    Jegadeesan, R., Friesenbichler, W., Langecker, G. & Steinbichler, G., 2009

    Research output: Non-textual form › Web publication/site › Research

  18. Published

    Studies of the melting behaviour of polypropylene nanocomposites using x-ray diffraction

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    Studies on the melting behavior of polypropylene nano-composites using X-ray diffraction and differential scanning calorimetry

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2009, ANTEC 2009 Society of Plastics Engineers' Annual Technical Conference. p. 2642-2646

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. 2008
  21. Published

    Advanced Compounding - Einsatz einer Schmelzepumpe und In-Line NIR Messtechnik für die Aufbereitung von Polypropylen Nanocomposites

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2008, Effizienz im Blickpunkt; Fakten - Technik - Konsequenzen. p. 1-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Advanced Compounding of Polymer Nanocomposites: Assembling a Melt Pump and In-line Near Infrared Spectroscopy into Extrusion Line

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    Determination of hierarchical strains in intercalated clay-polypropylene nanocomposites

    Maier, G., Feuchter, M., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Determination of hierarchical strains in intercalated clay-polypropylene nanocomposites

    Feuchter, M., Maier, G. A., Pinter, G., Kracalik, M., Laske, S. & Langecker, G. R., 2008, Materials Research Society Symposium Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    FT-NIR AS A QUANTITATIVE DETERMINATION METHOD FOR POLYMER NANOCOMPOSITES

    Laske, S., Kracalik, M., Feuchter, M., Pinter, G., Maier, G., Märzinger, W. & Langecker, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    FT-NIR AS A QUANTITATIVE DETERMINATION METHOD FOR POLYMER NANOCOMPOSITES

    Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G., Märzinger, W., Haberkorn, M. & Langecker, G., 2008, PPS-24. p. 290-290

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Measurement of pvT-data at process near cooling rates for injection moulding simulation and comparison of simulation results with experimental data

    Lucyshyn, T., Langecker, G. & Fischer, K., 2008, PPS-24. p. 155-155

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Measurement of pvT-data at process near cooling rates for injection moulding simulation and comparison of simulation results with experimental data

    Lucyshyn, T., Langecker, G. & Fischer, K., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Measurement of PVT-data at process near cooling rates for injection moulding simulation and comparison of simulation results with experimental data

    Lucyshyn, T., Langecker, G. & Fischer, K., 2008, In: VLK-News. p. 4-7

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Optimization of Compatibilizer Admixture in Polypropylene-Organclay Nanocomposites by Extensional Rheology

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2008, ASPM 2008 - 9th Austrian Polymer Meeting - Book of Abstracts. p. 43-43

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Preparation of Polymer-Nanocomposite-Masterbatch using a co-rotating twin screw extruder in combination with a melt pump

    Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G. & Langecker, G., 2008, PPS-24. p. 96-96

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Small angle x-ray scattering as method to determine mechanism of despersion in polypropylene clay nanocomposites

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2008, P2008. p. A32-A32

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. 2007
  34. Published

    Abhängigkeit des Exfolierungsgrades von Silikatschichten in einer Polymermatrix vom Compatibilizer - Nanoclay Mischverhältnis

    Laske, S., Kracalik, M., Gschweitl, M. & Langecker, G., 2007, 12 Problemseminar "Polymermischungen" Gefüllte und verstärkte Polymerblends - Nanoblends. p. 20-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Calculation of the pressure and the temperature development in the solid conveying zone of grooved extruders

    Schuschnigg, S. & Langecker, G., 2007, PPS-23 Program and Book of Abstracts. p. 74-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Calculation of the pressure and the temperature development in the solid conveying zone of grooved extruders: PPS-23 The Polymer Processing Society 23rd Annual Meeting

    Langecker, G. & Schuschnigg, S., 2007

    Research output: Non-textual form › Web publication/site › Research

  37. Published

    Druckentwicklung in der Feststoffförderzone

    Schuschnigg, S. & Langecker, G., 2007, In: VLK-News. 3+4, p. 4-10

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Expertensystem Spritzgießtechnik: Vom Design bis zum qualitätsgeprüften Formteil

    Langecker, G., Fischer, K., Lucyshyn, T., Fertschej, A. & Hirner, M., 2007,

    H.F. Mark Symposium 2007 - Fortschritte auf dem Gebiet der Elastomere & Thermoplastischen Elastomere

    .     p. 1-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Fast Determination of Reinforcement in Polymer Nanocomposites

    Kracalik, M., Laske, S., Gschweitl, M., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2007, NanoEurope 2007. p. 13-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Optical measuring technique for the verification of warpage computations with moldflow plastics insight (MPI)

    Fischer, K., Wassertheurer, M., Lucyshyn, T. & Langecker, G., 2007, PPS-23 Program and Book of Abstracts. p. 83-83

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Rheological Properties in Relation to Structure of Virgin and Recycled Polyehyleneterephthalate-Organoclay Nanocomposites

    Kracalik, M., Laske, S. & Langecker, G., 2007, 12. Problemseminar "Polymermischungen" Gefüllte und verstärkte Polymerblends - Nanoblends. p. 37-37

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Simulation des Aufheizvorgangs beim Thermoformen

    Fertschej, A., Langecker, G. & Kertz, J., 2007, In: Kunststoffe. 97, p. 62-65

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Simulation fo the heating step within the thermoforming process using the finite difference method

    Fertschej, A. & Langecker, G., 2007, PPS-23 Program and Book of Abstracts. p. 113-113

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Simulation of the Heating Cycle during Thermoforming

    Fertschej, A., Langecker, G. & Kertz, J., 2007, In: Kunststoffe. 97, p. 37-39

    Research output: Contribution to journal › Article › Research › peer-review

  45. 2006
  46. Published

    Abrasive/corresive Wear on Plastic Mould Steels, measured under practical conditions

    Friesenbichler, W., Langecker, G. & Caliskanoglu, D., 2006, Tooling Materials and their applications from research to market. p. 267-290

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    A Desgin Support System for Plastic Injection Molds: 22nd Annual Meeting of the Polymer Processing Society, Conference Proceedings

    Langecker, G., Lucyshyn, T. & Fischer, K., 2006

    Research output: Non-textual form › Web publication/site › Research

  48. Published

    A Design Support System for Plastic Injection Molds

    Fischer, K., Lucyshyn, T. & Langecker, G., 2006, Program and Abstracts of the 22nd Annual Meeting of the Polymer Processing Society, Yamagata, Japan 2006. p. 216-216

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    A new practical testing apparatus to evaluate corrision on plastic mold steel

    Friesenbichler, W., Berger, G., Langecker, G., Caliskanoglu, D., Hiebeler, B. J. & Perko, J., 2006, Tooling materials and their applications from research to market. p. 291-298

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Detection of Surface Structure and Appearance of Injection Molded Parts.

    Langecker, G., Friesenbichler, W., Berger, G. R. & Gruber, D., 2006, Program and Abstracts of the 22nd Annual Meeting of the Polymer Processing Society, Yamagata, Japan 2006. p. 218-218

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Detection of Surface Structure and Appearance of Injection Molded Parts. 22nd Annual Meeting of the Polymer Processing Society, Conference Proceedings

    Langecker, G., 2006

    Research output: Non-textual form › Web publication/site › Research

  52. Published

    Druckentwicklung in der Feststoffförderzone

    Schuschnigg, S. & Langecker, G., 2006, 19. Leobener Kunststoff Kolloqium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    EXINMOLD: Ein Expertensystem für die Entwicklung von Spritzgießwerkzeugen

    Fischer, K., Langecker, G., Lucyshyn, T. & Hirner, M., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Hochglanzoberflächen von Spritzgussteilen, Herstellung und Charakterisierung

    Friesenbichler, W., Langecker, G., Berger, G., Reitter, M. & Jutz, S., 2006, 19. Leobener Kunststoff Kolloqium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 Next
View graph of relations

Contact

Phone: 3531

Latest Research Output

View more (118)