Gregor Karl Mori

101 - 150 out of 267Page size: 50

Research output

  1. 2015
  2. Published

    Impact of microstructural characteristics on the corrosion morphology of high strength brazing sheets

    Kremmer, T., Antrekowitsch, H., Oberhauser, P., Hanko, G. & Mori, G., 2015, Proceedings of EMC 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. 2014
  4. Published

    Investigation of the corrosion behavior of Zn-Al-Mg hot-dip galvanized steel in alternating climate tests

    Keppert, T. A., Luckeneder, G., Stellnberger, K. H., Mori, G. & Antrekowitsch, H., 1 Dec 2014, In: Corrosion. 70, 12, p. 1238-1248 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    The effect of magnesium on the corrosion of hot-dip galvanized steel in chloride containing environments

    Keppert, T. A., Luckeneder, G., Stellnberger, K. H., Commenda, C., Mori, G. & Antrekowitsch, H., 1 Sept 2014, In: Materials and Corrosion. 65, 9, p. 871-880 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    EVALUATION OF PERFORMANCE OF GAS AND GAS CONDENSATE INHIBITORS WITH A LABORATORY TWO PHASE FLOW

    Prethaler, A. & Mori, G., 20 Mar 2014.

    Research output: Contribution to conference › Paper › peer-review

  7. Published

    Corrosion behaviour of nitriding steel grade coated with amorphous a-C:H:Si coating

    Dipolt, C. & Mori, G., 1 Jan 2014, International Corrosion Conference series / National Association of Corrosion Engineers: Corrosion 2014. (NACE - International Corrosion Conference Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Erosion-corrosion rates of corrosion-resistant alloys under high-velocity multiphase conditions

    Mori, G., Vogl, T., Haberl, J., Havlik, W., Schöberl, T. & Hosemann, P., 1 Jan 2014, In: Corrosion. 70, 6, p. 579-590 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Internal corrosion of automotive exhaust systems

    Hashimoto, R., Mori, G., Tröger, U. & Wieser, H., 1 Jan 2014, International Corrosion Conference series / National Association of Corrosion Engineers. (NACE - International Corrosion Conference Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    On the slowdown of the crack propagation rate of austenitic stainless steels in corrosive environment

    Kapp, M., Fluch, R., Martinez, C., Pippan, R., Mori, G., Vichytil, C., Sonnleitner, R. & Panzenböck, M., 1 Jan 2014, International Corrosion Conference series / National Association of Corrosion Engineers. (NACE - International Corrosion Conference Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Accelerated SCC Testing of Stainless Steels According to Corrosion Resistance Classes

    Borchert, M., Mori, G., Bischof, M. & Tomandl, A., 2014, Accelerated SCC Testing of Stainless Steels According to Corrosion Resistance Classes. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    AMAG TopClad UHS: Der hochfeste Werkstoffverbund für hochbeanspruchte Wärmetauscher-Anwendungen

    Hanko, G., Oberhauser, P., Kremmer, T., Antrekowitsch, H., Kratzer, M., Teichert, C. & Mori, G., 2014, 8. Ranshofener Leichtmetalltage, Leichtmetalle - Prozesse - Anwendungen: Zukunftstechnologien als Basis für neue Mobilitätskonzepte. p. 18-28

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Correlation between Streicher and EPR Test

    Lackner, R., Mori, G., Egger, R. & Winter, F., 2014, Correlation between Streicher and EPR Test. p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Corrosion Fatigue of Austenitic Stainless Steel in Different Hot Chloride Solutions

    Visser, A., Mori, G., Panzenböck, M. & Pippan, R., 2014, Corrosion Fatigue of Austenitic Stainless Steel in Different Hot Chloride Solutions. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Determination of Trapping Parameters and the Chemical Diffusion Coefficient from Hydrogen Permeation Experiments

    Svoboda, J., Mori, G., Prethaler, A. & Fischer, F. D., 2014, In: Corrosion science. 82, p. 93-100

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    High strength brazing sheet with improved corrosion resistance

    Kremmer, T., Hanko, G., Oberhauser, P., Hajek, A., Antrekowitsch, H. & Mori, G., 2014, DVS-Berichte: Aluminium Brazing 8th International Congress. p. 67-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Influence of Tantalum on structure, electrical resistivity and corrosion behavior of sputtered molybdenum films

    Hofer-Roblyek, A. M., Reinfried, N., Mori, G., Winkler, J. & Mitterer, C., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  18. Published

    Precipitation and dissolution of critical phases in Alloy 625

    Lackner, R., Mori, G., Egger, R. & Winter, F., 2014, Precipitation and dissolution of critical phases in Alloy 625. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Schwingungsrisskorrosion rostfreier austenitischer Stähle in heißen chloridhaltigen Lösungen

    Visser, A., Mori, G., Panzenböck, M., Kapp, M., Leitner, H., Fluch, R. & Holper, B., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 300-301

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Sensitization of as Rolled and Stable Annealed Alloy 625

    Lackner, R., Mori, G., Egger, R. & Winter, F., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 12-22

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    The effect of sulphate, phosphate, nitrate and acetate on the corrosion behaviour of Zn-Al-Mg hot-dip galvanised steel

    Keppert, T., Luckeneder, G., Stellnberger, K.-H., Mori, G. & Antrekowitsch, H., 2014, In: Materials and Corrosion. p. 560-568

    Research output: Contribution to journal › Article › Research › peer-review

  22. 2013
  23. Published

    Chemical composition of real condensate in automotive exhaust systems

    Hashimoto, R., Mori, G., Yasir, M., Tröger, U. & Wieser, H., 1 Dec 2013, EUROCORR 2013 - European Corrosion Congress. (EUROCORR 2013 - European Corrosion Congress).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Corrosion fatigue properties of austenitic stainless steels with different composition and strength in chloride solutions

    Visser, A., Vichytil, C., Mori, G., Vidic, J., Pippan, R., Panzenböck, M. & Kapp, M., 1 Dec 2013, EUROCORR 2013 - European Corrosion Congress. (EUROCORR 2013 - European Corrosion Congress).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Sensitization of stable and as rolled annealed Alloy 625

    Lackner, R., Mori, G., Egger, R., Winter, F., Albu, M. & Kothleitner, G., 1 Dec 2013, EUROCORR 2013 - European Corrosion Congress. (EUROCORR 2013 - European Corrosion Congress).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Biokraftstoffe und Korrosion

    Havlik, W., Thayer, K., Mori, G. & Holzer, C., 2013, Biokraftstoffe und Korrosion. p. 133-140

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Corrosion fatigue and repassivation investigations of CrNiMo austenitic stainless steels in chloride environment

    Visser, A., Vichytil, C., Mori, G., Vidic, K., Pippan, R., Panzenböck, M., Kapp, M. & Fluch, R., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 384-390

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Corrosion of Molybdenum in Cooling Water

    Holzer, C., Vichytil, C., Mori, G. & Linke, C., 2013, Corrosion of Molybdenum in Cooling Water. p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Corrosion Research in Austria

    Mori, G., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 347-347

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Efficiency of two gas and gas condensate inhibitors in a laboratory two phase flow

    Prethaler, A., Vogl, T., Mori, G., Havlik, W., Zehethofer, G., Hönig, S. & Rosenberg, E., 2013, Efficiency of two gas and gas condensate inhibitors in a laboratory two phase flow. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Evaluation of two different Inhibitor Testing Methods for High Superficial Flow Conditions

    Prethaler, A., Vogl, T., Mori, G., Havlik, W., Zehethofer, G. & Hönig, S., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 371-376

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Influence of Key Parameters on NACE Standard TM0177 DCB Sour Gas Test

    Moderer, L., Holzer, C., Mori, G., Klösch, G., Klarner, J. & Sonnleitner, R., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 348-354

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Influence of the pH value on the corrosion of Zn-Al-Mg hot-dip galvanized steel sheets in chloride containing environments

    Keppert, T., Mori, G., Luckeneder, G. & Stellnberger, K.-H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 355-363

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Investigations on susceptibility to intergranular corrosion of thermo-mechanically rolled corrosion-resistant materials 316L and Alloy 825

    Prohaska, M., Mori, G., Grill, R., Tischler, G. & Mitsche, S., 2013, In: Materials and Corrosion. p. 290-299

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Modelling the Influence of Trapping on Hydrogen Permeation in Metals

    Fischer, F. D., Mori, G. & Svoboda, J., 2013, In: Corrosion science. 76, p. 382-389

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Molybdenum and Chromium Depletion at Grain Boundary Precipitates Alloy 926

    Lackner, R., Mori, G., Egger, R., Tischler, G. & Prohaska, M., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 364-370

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Molybdenum corrosion in PVD processes

    Holzer, C., Vichytil, C., Mori, G. & Linke, C., 2013, Molybdenum corrosion in PVD processes. p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Sensitization of stable and as rolled Alloy 625

    Lackner, R., Mori, G., Egger, R., Winter, F., Albu, M. & Kothleitner, G., 2013, Sensitization of stable and as rolled Alloy 625. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    UNS 06625: PRECIPITATION AND SENSITIZATION

    Lackner, R., Mori, G., Egger, R. & Tischler, G., 2013, UNS 06625: PRECIPITATION AND SENSITIZATION. p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. 2012
  41. Published

    Study of sensitization and different heating cycles on stainless steels used for automotive exhaust components

    Yasir, M., Mori, G., Wieser, H., Reller, A. & Höppel, H. W., 1 Sept 2012, In: Materials and Corrosion. 63, 9, p. 763-776 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    applicability and limitations of the epr-test as a substitute for ASTM G28 A Streicher-Test

    Mori, G., Prohaska, M. & Tischler, G., 2012, EMCR 2012. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Crack growth rates and corrosion fatigue of austenitic stainless steels in high chloride solutions

    Vichytil, C., Mori, G., Pippan, R., Panzenböck, M. & Fluch, R., 2012, Key engineering materials. Vol. 488-489. p. 97-100 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  44. Published

    Effect of isothermal and thermo-mechanical heat treatment on phase precipitation and corrosion properties of Alloy 926

    Lackner, R., Mori, G., Prohaska, M., Egger, R. & Tischler, G., 2012, Effect of isothermal and thermo-mechanical heat treatment on phase precipitation and corrosion properties of Alloy 926. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Effect of microalloying elements on sour service grades with higher strength

    Moderer, L., Mori, G. & Schwarz, S., 2012, Corrosion 2012: March 11–15, 2012 Salt Lake City, Utah. Vol. NACE-2012-1552. p. 1-15 1552

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Einfluss von Inhibitoren auf strömungsinduzierte CO2 Korrosion

    Vogl, T. & Mori, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Fatigue and cracking behaviour of austenitic CrNiMo and CrMnN steels in chloride containing environment at elevated temperature

    Vichytil, C., Mori, G., Pippan, R., Panzenböck, M. & Fluch, R., 2012, Fracture Mechanics for Durability, Reliability and Safety. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Improvement of the corrosion behaviour of molybdenum films by alloying with tantalum

    Hofer, A. M., Reinfried, N., Mori, G., Winkler, J. & Mitterer, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    influence of alloying elements on the passivity and repassivation of austenitic stainless steels

    Mori, G., Vichytil, C., Umgeher, A. & Fluch, R., 2012, Eurocorr 2012. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Influence of pH value on the corrosion of Zn-Al-Mg hot-dip galvanized steel sheets in chloride containing environments

    Keppert, T., Luckeneder, G., Stellnberger, K. H. & Mori, G., 2012, Corrosion 2012. p. 3978 - 3992 (International Corrosion Conference series / National Association of Corrosion Engineers; vol. 5).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Inhibitor-testing by a new high superficial velocity flow-loop system

    Vogl, T., Reisl, T., Zehethofer, G., Mori, G., Havlik, W. & Honig, S., 2012, Corrosion Conference and Expo. 2012. Vol. 4. p. 2917-2930

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Molybdenum and Chromium Depletion at Grain Boundary Principia in Alloy 926

    Lackner, R., Mori, G., Prohaska, M., Egger, R. & Tischler, G., 2012, Molybdenum and Chromium Depletion at Grain Boundary Principia in Alloy 926. p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Schäden an Hängeseilbrücken

    Mori, G., 2012, 3-Länder-Korrosionstagung 2012. p. 16-22

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Schwingungsrisskorrosion an CrNiMo und CrMnN Austeniten

    Vichytil, C. & Mori, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1 2 3 4 5 6 Next
View graph of relations

Contact

Phone: 1250

Latest Research Output

View more (267)