Gerald Pinter

501 - 839 out of 839Page size: 500

Research output

  1. 2012
  2. Published

    Kunststofftechnik Leoben: Rohrexpertise in Spanien Präsentiert

    Arbeiter, F., Pinter, G., Redhead, A. & Frank, A., 2012, In: VLK-News. p. 18-18

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Lifetime prediction of multi-layer polyolefin pipes

    Arbeiter, F. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Lifetime prediction of polyethylene pipes

    Frank, A. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  5. Published

    Material- und Rissanalyse von Kunststoffkanülen aus LDPE

    Resch, K. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  6. Published

    Mechanische Kennwertermittlung von unterschiedlichen Thermoplasten

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  7. Published

    Mechanische und thermische Charakterisierung von sieben verschiedenen glasfaserverstärkten Polymeren

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  8. Published

    Mode I delamination fatigue crack growth in unidirectional fiber reinforced composites: Development of a standardized test procedure

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N. & Pinter, G., 2012, In: Composites science and technology. 72, p. 1102-1107

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Modeling of the nonlinear viscoelasticity of polyoxymethylene in tension and compression

    Tscharnuter, D., Gastl, S. & Pinter, G., 2012, In: International journal of engineering science. 60, p. 37-52

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Numerical assessment of PE 80 and PE 100 pipe lifetime based on Paris-Erdogan Equation

    Frank, A., Hutar, P. & Pinter, G., 2012, In: Macromolecular Symposia. 311, p. 112-121

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Numerical simulation of crack growth in polyethylene composites by means of the cohesive zone model

    Janko, M., Ecker, W., Pinter, G. & Kolednik, O., 2012, In: Macromolecular Symposia. 311, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Optical and mechanical characterization of fluoropolymer films for pneumatic pre-stressed sun concentrators

    Hirschmann, B., Oreski, G., Resch, K. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    Ramanspektroskopische Untersuchungen von Einschlüssen in PCTFE-Folien

    Bruckmoser, K., Pinter, G. & Resch, K., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    Simulation of pipe failures

    Mitev, I. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Simulations and experiments of open hole tension tests - Assessment of intra-ply plasticity, damage, and localization

    Flatscher, T., Wolfahrt, M., Pinter, G. & Pettermann, H. E., 2012, In: Composites science and technology. 72, p. 1090-1095

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Study of mechanical and physico-chemical surface properties of composites and their impact on bond strengths in repair technologies

    Jölly, I., Wolfahrt, M., Wolfberger, A., Pinter, G., Kern, W. & Noisternig, J., 2012, ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials. p. 1-1 (ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Surface characterization and functionalization of composites to optimize bonded repairs for aircraft structures

    Jölly, I., Schlögl, S., Wolfahrt, M. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    Temperature dependent fracture behavior of Rubbers used in the oil and gas industry

    Schrittesser, B., Pinter, G. & Major, Z., 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Temperature dependent mechanical tests

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Tensile tests on pipe materials

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    The influence of test frequency and eccentric crack growth on cyclic CRB tests

    Frank, A., Redhead, A. & Pinter, G., 2012, Proceedings of ANTEC 2012. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Thermische und mechanische Analysen von ß-Polypropylen

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Thermische und optische Untersuchungen an mit INDUCON-Verfahren gefertigten Schweißnähten

    Arbeiter, F. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Thermische Werkstoff-Charakterisierung von Spritzguss-Filterteilen aus PA6

    Pilz, G. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Untersuchungen von PMMA-Lichteinhausungen

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Veränderungen der Struktur und der mechanischen Eigenschaften von polymeren Nanokompositen durch Variation der Prozessparameter beim Compoundieren

    Feuchter, M., Pinter, G., Maier, G., Witschnigg, A., Kracalik, M. & Laske, S., 2012, 21. Leobener Kunststoff-Kolloquium: Mit Compoundieren zum Erfolg. p. 77-95

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Zugprüfungen an Folien

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. 2011
  29. Published

    Schadenstoleranz und interlaminares Risswachstum in Hochleistungsfaserverbundwerkstoffen

    Stelzer, S., Schillfahrt, C., Wolfahrt, M. & Pinter, G., 10 Nov 2011.

    Research output: Contribution to conference › Presentation › Research

  30. Published

    Mode I Delamination Fatigue Crack Growth In Unidirectional Fibre Reinforced Composites: Results from ESIS TC4 round-robins

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N., Cano, G. M. & Pinter, G., 11 Sept 2011.

    Research output: Contribution to conference › Presentation › Research

  31. Published

    Delamination resistance of advanced fiber-reinforced polymer-matrix laminates under fatigue loading: Approaches for Mode II and Mixed Mode I/II testing

    Brunner, A., Stelzer, S., Dell'Anno, G., Pinter, G. & Terrasi, G. P., 5 Sept 2011.

    Research output: Contribution to conference › Presentation › Research

  32. Published

    Mode I Delamination Fatigue Crack Growth In Unidirectional Fibre Reinforced Composites: Development Of A Standardized Test Procedure

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N. & Pinter, G., 15 Apr 2011.

    Research output: Contribution to conference › Presentation › Research

  33. Published

    Mode I delamination fatigue crack growth in unidirectional fiber reinforced composites: Development of a standardized test procedure

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N. & Pinter, G., 13 Apr 2011, Proc. 11th International Conference on Interfacial Phenomena on Composite Materials, Cambridge, UK.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Accelerated investigation of the influence of aggressive media on the resistance to slow crack growth of polyethylene for geomembrane applications

    Redhead, A., Pinter, G. & Frank, A., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. Published

    Analyse zweier Spritzgussteile

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  36. Published

    Analyse zweier Spritzgussteile II

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  37. Published

    A numerical methodology for lifetime estimation of HDPE pressure pipes

    Hutar, P., Sevcik, M., Nahlik, L., Pinter, G., Frank, A. & Mitev, I., 2011, In: Engineering Fracture Mechanics. 78, p. 3049-3058

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    A numerical methodology for lifetime estimation of HDPE pressure pipes

    Hutar, P., Sevcik, M., Nahlik, L., Pinter, G., Frank, A. & Mitev, I., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  39. Published

    Basischarakterisierung einer Polyethylen-Rohrummantelung

    Stelzer, S. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  40. Published

    Betriebsfeste Dimensionierung von faserverstärkten Kunststoffkomponenten – eine durchgängige Simulationskette von der Spritzgusssimulation zur Schädigungsrechnung

    Guster, C., Mösenbacher, A. & Pinter, G., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    Betriebsfeste Dimensionierung von faserverstärkten Kunststoffkomponenten - eine durchgängige Simulationskette von der Spritzgusssiumulation zur Schädigungsrechnung

    Guster, C., Pinter, G. & Mösenbacher, A., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 163-167

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Bewitterungsuntersuchungen an PMMA-Linsen

    Pilz, G. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Characterization of crack initiation and slow crack growth in polyethy-lene with cyclic cracked round bar tests

    Frank, A., Redhead, A., Kapur, M., Chang, D., Schramm, D., Bensason, S. & Pinter, G., 2011, 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011. p. 2214-2219 6 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Characterization of Crack initiation and Slow Crack Growth in Polyethylene with Cyclic Cracked Round Bar Tests

    Frank, A., Redhead, A., Kapur, M., Chang, D., Schramm, D., Pinter, G. & Bensason, S., 2011, proceedings of Annual Technical Conference of the Society of Plastics Engineers (ANTEC). p. 2214-2219

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Comparative study of the temperature dependent delamination behavior of FOUR solar cell encapsulants to glass and backsheet-laminate

    Oreski, G., Pinter, G. & Knausz, M., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  46. Published

    Comparative study of the temperature dependent delamination behavior of FOUR solar cell encapsulants to glass and backsheet-laminate

    Oreski, G. & Pinter, G., 2011, 26th European Photovoltaic Solar Energy Conference and Exhibition (26th EU PVSEC). p. 4-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Continious Simulation Loop for Fatigue Life Calculation of Short Fiber Reinforced Plastics Components

    Mösenbacher, A., Guster, C., Fleischer, H., Pinter, G. & Eichlseder, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Development of an instrumented autoclave for rapid gas decompression experiments

    Major, Z., Schrittesser, B. & Pinter, G., 2011, Tagung „Innovation Messtechnik“. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Durchstoßversuch an unterschiedlichen Polypropylenmischungen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Dynamisch Mechanische Analyse an einem TPE Werkstoff

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Dynamisch-mechanische Analyse an Tennissaiten

    Pilz, G. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. Published

    Dynamisch mechanische Untersuchungen an PTFE Werkstoffen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  53. Published

    Effect of the process parameter yarn width on the mechanical and fatigue behaviour of braided composite materials

    Wolfahrt, M., Zaremba, S., Reden von, T. & Pinter, G., 2011, of the 16th International Conference on Composite Structures (ICCS16). p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Effects of the Processing History on the Crack Kinetics in a Polyethylene Pipe Grade

    Redhead, A., Frank, A. & Pinter, G., 2011, proceedings of Annual Technical Conference of the Society of Plastics Engineers (ANTEC). p. 1414-1418

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Einfluss der Faserarchitektur auf die mechanischen Eigenschaften und die Schadenstolerenz von Geflechtlaminaten

    Berger, I., Pinter, G. & Wolfahrt, M., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 187-181

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Einfluss von Defekten auf das Langzeitermüdungsverhalten von Composites

    Pinter, G., Wolfahrt, M. & Ladstätter, E., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  57. Published

    Einfluss von Defekten auf das Langzeit Ermüdungsverhalten von Composites

    Pinter, G., Wolfahrt, M. & Ladstätter, E., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 169-173

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Ermittlung der HDT Formbeständigkeitstemperatur an 5 Harzwerkstoffen

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  59. Published

    Evaluation of a Simulation Process for Fatigue Life Calculation of Short Fibre Reinforced Plastic Components

    Guster, C., Pinter, G., Mösenbacher, A. & Eichlseder, W., 2011, In: Procedia Engineering. 10, p. 2104-2109

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Impact of chemical and physical properties of H-NBR based elastomers on the rapid gas decompression performance

    Schrittesser, B. & Pinter, G., 2011,

    Proceedings of High Performance Thermoplastics & Composites for Oil and Gas Applications

    .     p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Instrumentierter Durchstoßversuch an zwei Materialien bei -20 °C

    Stelzer, S. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  62. Published

    Instrumentierter Durchstoßversuch an zwei Materialien bei Raumtemperatur

    Stelzer, S. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  63. Published

    Investigation of the chemical resistance and the material aging conditions of polyethylene for pipe applications

    Redhead, A., Frank, A. & Pinter, G., 2011.

    Research output: Contribution to conference › Paper › peer-review

  64. Published

    Investigation of the chemical resistance and the material anging conditions of polyethylene for pipe applications

    Redhead, A., Frank, A. & Pinter, G., 2011, SPE-EUROTEC 2011. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Irreversible deformation of isotactic polypropylene in the pre-yield regime

    Tscharnuter, D., Jerabek, M., Major, Z. & Pinter, G., 2011, In: European polymer journal. 47, p. 989-996

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Kerbschlaguntersuchungen an ABS-Compounds

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  67. Published

    Kerbschlaguntersuchungen an Erdölcutingproben

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  68. Published

    Local structure around nano-clay agglomerates in PP composites – a scanning X-Ray diffraction study with sub micron resolution

    Feuchter, M., Maier, G. A., Burghammer, M., Kracalik, M., Laske, S., Keckes, J. & Pinter, G., 2011, European Polymer Congress 2011. p. 515-515

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Mechanische Prüfungen an ABS-Mischungen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  70. Published

    Mechanische Prüfungen an unterschiedlichen Polypropylentypen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  71. Published

    Mechanische und thermo-mechanische Untersuchungen an PIM Feedstock-Grünteilen

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  72. Published

    Mechanische Untersuchungen an mineralisch gefüllten Polypropylen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  73. Published

    Mikroskopie an Bruchflächen mehrerer Bauteile

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  74. Published

    Optimierte Auslegung durch druckabhängige nichtlinear viskoelastische Modellierung

    Tscharnuter, D., Gastl, S. & Pinter, G., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 142-152

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Physikalische Prüfungen von Elastomer-Mischungen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  76. Published

    Ramanspektroskopische Untersuchungen von Rohroberflächen

    Bruckmoser, K., Pinter, G. & Resch, K., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  77. Published

    Schadenstoleranz und interlaminares Risswachstum in Hochleistungsfaserverbundwerkstoffen

    Stelzer, S., Schillfahrt, C., Wolfahrt, M. & Pinter, G., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 83-92

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Schlagbiegeuntersuchungen an gefüllten Polypropylenmischungen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  79. Published

    Statische Zugversuche an Compositerohren

    Stelzer, S. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  80. Published

    Thermo-kalorimetrische Untersuchung an Duromerwerkstoffen

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  81. Published

    Thermoplastische Faserverbundwerkstoffe im Automobilbau – Einsatzmöglichkeiten am Beispiel von CULT

    Wolfahrt, M., Kastanis, D., Tscharnuter, D., Schledjewski, R. & Pinter, G., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 193-197

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Uniaxial nonlinear viscoelastic viscoplastic modeling of polypropylene

    Tscharnuter, D., Jerabek, M., Major, Z. & Pinter, G., 2011, In: Mechanics of time-dependent materials. 16, 3, p. 1-12

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Untersuchung der Dispergierung von dem Arzneimittel Paracetamol in einer Kunststoffmatrix

    Resch, K. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  84. Published

    Untersuchung des Haftungsverhaltens von PV-Einbettfolien zu Glas und zum Rückseitenlaminat

    Oreski, G., Pinter, G. & Knausz, M., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  85. Published

    Vergleichende mechanisch und thermomechanische Untersuchungen an Vitonmembranen

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  86. Published

    Vergleichende optische und thermo-kalorimetrische Untersuchungen an PBT Bauteilen

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  87. Published

    Wärmeformbeständigkeitsuntersuchunen an UP-Harz-Werkstoffen

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  88. Published

    Werkstoffcharakterisierung, Materialmodellierung und Simulaton von CFK-Geflechtlaminaten

    Wolfahrt, M., Cichosz, J., Gager, J., Hinterhölzl, R., Pettermann, H. E., Frieß, S., Pinter, G. & Noisternig, J., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 101-111

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Zugprüfungen an PVC-Mischungen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  90. 2010
  91. Published

    Cyclic interlaminar crack growth in unidirectional and braided composites

    Stelzer, S., Pinter, G., Wolfahrt, M., Brunner, A. & Noisternig, J., 16 Oct 2010.

    Research output: Contribution to conference › Presentation › Research

  92. Published

    Damage Tolerance and interlaminar crack growth of braided composites

    Stelzer, S., Wolfahrt, M., Pinter, G., von Reden, T. & Noisternig, J., 7 Jun 2010.

    Research output: Contribution to conference › Presentation › Research

  93. Published

    Accelerated cyclic fracture mechanics tests to analyse molecular and morphological effects on slow crack growth in modern PE pipe grades

    Redhead, A., Pinter, G. & Frank, A., 2010, Proceedings ANTEC 2010. p. 360-364

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Accelerated cyclic fracture mechanics tests to analyze molecular and morphological effects on slow crack growth in modern PE pipe grades

    Redhead, A., Pinter, G. & Frank, A., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  95. Published

    Bestimmung der Schweißnahtfestigkeit zweier unterschiedlicher Schweißnahtausführungen an einem PVC-Folienwerkstoff

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  96. Published

    Bestimmung von Kerbtiefen an grabenlos verlegten Polyethylen-Rohrleitungen

    Frank, A., Hartl, A. M., Redhead, A. & Pinter, G., 2010, proceedings of ÖGL Symposium Grabenlos 2010. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Characterization of the Orientation Parameters Around Crack Tips in Unfilled and Nanofilled Poly(propylene) Using in-situ Synchrotron Small and Wide Angle Scanning Scattering Techniques

    Feuchter, M., Maier, G., Zizak, I., Pinter, G., Kracalik, M., Laske, S. & Langecker, G. R., 2010, MODERN TRENDS IN POLYMER SCIENCE-EPF 09. Vol. 296. p. 189-196 (MACROMOLECULAR SYMPOSIA).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  98. Published

    Computational and experimental investigation of delamination in L-shaped laminated composite components

    Wimmer, G., Kitzmüller, W., Pinter, G., Wettemann, T. & Pettermann, H. E., 2010, In: Engineering Fracture Mechanics. p. 2810-2820

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Cyclic CRB Tests - A quick and reliable tool for ranking of PE pipe grades

    Pinter, G., Frank, A., Redhead, A. & Lang, R. W., 2010, proceedings of Plastic Pipes XV Conference 2010. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Cyclic interlaminar crack growth in unidirectional and braided composites

    Stelzer, S., Pinter, G., Wolfahrt, M., Brunner, A. & Noisternig, J., 2010, Proceedings of 5th International Conference on Fatigue of Composites. p. 63-75

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Damage Tolerance and interlaminar crack growth of braided composites

    Stelzer, S., Wolfahrt, M., Pinter, G., von Reden, T. & Noisternig, J., 2010, Proceedings of 14th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Determination of x-ray elastic constants and their applications to characterize microstresses in polypropylene nanocomposites

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M. & Laske, S., 2010, Book of Abstracts. p. 54-55

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Development of a Test Procedure for Mode II Fatigue Delamination Resistance of Advanced Fibre-Reinforced Polymer-Matrix Laminates

    Brunner, A., Stelzer, S. & Pinter, G., 2010, Proceedings of 18th European Conference on Fracture.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    Druckversuche an einem expandierten Polypropylen und 3-Punkt-Biegeversuche an einem Polypropylen

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  105. Published

    Durchstoßversuch an PP und ABS/PC-Blends

    Hinterdorfer, S. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  106. Published

    Einfluss von Faserorientierung, Temperatur und Feuchtigkeit auf das Schwingfestigketisverhalten von spritzgegossenen kurzfaserverstärkten Thermoplasten

    Gaier, C., Fleischer, H., Guster, C. & Pinter, G., 2010, In: MP materials testing : Materialprüfung . 52, p. 534-542

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    Fracture Mechanics Lifetime Prediction of PE 80 and PE 100 Pipes under complex loading conditions

    Frank, A., Pinter, G. & Lang, R. W., 2010, proceedings of Plastic Pipes XV Conference 2010. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  108. Published

    In-line characterization of polypropylene nanocomposites using FIT-NIR

    Witschnigg, A., Laske, S., Kracalik, M., Feuchter, M., Pinter, G., Maier, G., Märzinger, W., Haberkorn, M., Langecker, G. & Holzer, C., 2010, In: Journal of Applied Polymer Science. 117, p. 3047-3053

    Research output: Contribution to journal › Article › Research › peer-review

  109. Published

    Investigation of the slow crack growth behavior of static and cyclic loaded specimens of polyethylene by 2D and 3D optical fracture surface analysis

    Frank, A., Bruckmoser, K., Redhead, A., Gruber, D. & Pinter, G., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  110. Published

    Investigation of the slow crack growth behavior of static and cyclic loaded specimens of polyethylene by 2D and 3D optical fracture surface analysis

    Andreas, F., Bruckmoser, K., Redhead, A., Gruber, D. P. & Pinter, G., 2010, Proceedings of "Austrian-Slovenian Polymer Meeting 2010". p. 145-145

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  111. Published

    Kerbschlagbiegeversuche an 11 PP Compounds

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  112. Published

    Kerbschlagbiegeversuche an 15 PP Compounds

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  113. Published

    Kerbschlagprüfungen an PE Typen

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  114. Published

    Kerbschlagprüfungen an PP Compounds

    Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  115. Published

    Kompressions- und Scherversuche an PU-Schaum

    Hinterdorfer, S. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  116. Published

    Mechanische Charakterisierung eines glasfaserverstärkten UP-Werkstoffes

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  117. Published

    Mechanische und morphologische Untersuchungen an Polyolefin/Algen-Compounds

    Feuchter, M. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  118. Published

    Polyethylene close-fit-liner - material properties and long-term failure behavior

    Frank, A., Hofmann, A., Haager, M. & Pinter, G., 2010, proceedings of Plastic Pipes XV Conference 2010. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  119. Published

    Ranking of PE pipe materials

    Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  120. Published

    Real-time characterization of polypropylene nanocomposites in a corotating twin screw extruder

    Laske, S., Witschnigg, A., Kracalik, M., Feuchter, M., Pinter, G., Maier, G. A., Langecker, G. & Holzer, C., 2010, Proceedings ANTEC 2010. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  121. Published

    Schlagbiegeversuche an 4 UP-Harztypen bei 4 Temperaturen

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  122. Published

    Shore Härteprüfung an POM Bauteilen

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  123. Published

    Simulation von Druckstößen an Rohrverbindungen

    Stelzer, S. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  124. Published

    Standard-Zugversuche an 5 GFK-Rohrwerkstoffen

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  125. Published

    Standard-Zugversuche an PVC (3 Werkstoffzustände)

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  126. Published

    Structural influence of layered silicates on mechanical properties in polypropylene nanocomposites

    Feuchter, M., Maier, G. A., Pinter, G., Laske, S. & Kracalik, M., 2010, proceedings of 14th intern.Conference Polymeric Materials. p. 195-198

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  127. Published

    Thermo-mechanische Charakterisierung von PA-GF

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  128. Published

    Validation of an accelerated fracture mechanics extrapolation tool for lifetime prediction of PE pressure pipes

    Frank, A., Hartl, A. M., Pinter, G. & Lang, R. W., 2010, proceedings of Annual Technical Conference of the Society of Plastics Engineers (ANTEC) 2010. p. 1638-1643

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  129. Published

    Werkstoffcharakterisierung von Kunststoffgeweben mittels Dynamischer Differenzkalorimetrie

    Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  130. Published

    Zugfestigkeit an Rohrverbindungen

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  131. Published

    Zugversuche an 4 Folienwerkstoffen

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  132. Published

    Zugversuche an verklebten Aluminiumblechen

    Pilz, G. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  133. 2009
  134. Published

    Advanced characterization of polymer-clay nanocomposites: application of in-line near infrared spectroscopy and on-line extensional rheology

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009, EuroNanoForum 2009 - Nanotechnology for Sustainable Economy - Proceedings. p. 222-222

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  135. Published

    Advanced characterization of polymer-clay nanocomposites: application of in-line near infrared spectroscopy and on-line extensional rheology

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  136. Published

    Advanced Compounding of Polymer Nanocomposites by assembling a melt pump

    Witschnigg, A., Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  137. Published

    Advanced Compounding of Polymer Nanocomposites using a Melt Pump

    Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009, Proceedings of a Conference on Polyolefins and Polymelamines. p. 148-148

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  138. Published

    A fracture mechanics concept for the accelerated characterization of creep crack growth in PE-HD pipe grades

    Frank, A., Freimann, W., Pinter, G. & Lang, R., 2009, In: Engineering Fracture Mechanics. 76, p. 2780-2787

    Research output: Contribution to journal › Article › Research › peer-review

  139. Published

    Assessment of Material Properties during compounding of Polymer Nanocomposites using In-Line near Infrared Spectroscopy

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009, Proceedings of a Conference on Polyolefins and Polymelamines. p. 150-150

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  140. Published

    Betriebsfeste Dimensionierung von faserverstärkten Kunststoffkomponenten – eine durchgängige Simulationskette von der Spritzgusssimulation zur Schädigungsrechnung

    Guster, C., Pinter, G. & Eichlseder, W., 2009, Kunststoffgerecht simulieren – Auslegung von Spritzgussbauteilen mit CAE. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  141. Published

    Braided Fabrics: Development and evaluation of adequate test methodologies for generating design allowables

    Wolfahrt, M., Pinter, G., Zaremba, S., Ladstätter, E. & Reden, von, T., 2009, ANTEC 2009 Society of Plastics Engineers' Annual Technical Conference. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  142. Published

    Characterization of the strain distribution around crack tips in unfilled and nanofilled polypropylene using in situ synchrotron small and wide angle scanning scattering techniques

    Feuchter, M., Maier, G., Zizak, I., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2009, EPF'09 european polymer congress. p. 120-120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  143. Published

    Close-Fit-Liner – Verfahrens bedingte Beeinflussung der Werkstoffeigenschaften und des Rohrlangzeitverhaltens

    Frank, A., Hofmann, A., Haager, M. & Pinter, G., 2009, In: 3 R international. 48, p. 2-8

    Research output: Contribution to journal › Article › Research › peer-review

  144. Published

    Close-Fit Relining - Verfahrensbedingte Beeinflussung der Werkstoffeigenschaften und des Rohrlangzeitverhaltens

    Frank, A., Haager, M., Hofmann, A., Pinter, G. & Lang, R., 2009, ÖGL Symposium Grabenlos. p. 54-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  145. Published

    Computational and experimental simulation of delamination in L-shaped laminated composite components

    Wimmer, G., Kitzmüller, W., Pinter, G., Wettemann, T. & Pettermann, H. E., 2009, In: Engineering Fracture Mechanics. 76, p. 2810-2820

    Research output: Contribution to journal › Article › Research › peer-review

  146. Published

    Crack growth in polyethylene (PE-HD) - from macroscopic failure to molecular failure mechanisms

    Lang, R., Pinter, G., Frank, A. & Haager, M., 2009, EPF'09 European polymer congress. p. 121-121

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  147. Published

    Determination of hierarchical strains in intercalated clay-polypropylene nanocomposites

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2009, 2008 MRS Fall Meeting Symposium. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  148. Published

    Determination of material parameters for hyperelastic material models for two elastomer grades

    Major, Z. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  149. Published

    Development of a standardized procedure for the characterization of interlaminar crack growth in advanced composites under fatigue mode i loading conditions

    Brunner, A. J., Murphy, N. & Pinter, G., 2009, In: Engineering Fracture Mechanics. 76, p. 2678-2689

    Research output: Contribution to journal › Article › Research › peer-review

  150. Published

    Diverse Messungen an Polypropylen-Talk Compounds

    Pinter, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  151. Published

    Druckprüfung nach ASTM D3410 an Composite Proben

    Pinter, G. & Payer, M., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  152. Published

    Effect of polymer matrix on quasi-static and fatigue filled hole tension and compression tests in liquid moulding non-crimp fabric composites

    Pinter, G., Wolfahrt, M. & Kuntz, J., 2009, Sampe Europe 30 th Intern. Jubilee Conference and Forum. p. 183-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  153. Published

    Effect of preform architecture on the mechanical and fatigue behavior of braided compositess for generating design allowables

    Wolfahrt, M., Pinter, G., Zaremba, S., Reden, von, T. & Ebel, C., 2009, Sampe Europe 30 th Intern. Jubilee Conference and Forum. p. 271-276

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  154. Published

    Effects of temperature and moisture on the tensile/tensile fatigue behavior of an injection molded sgf-reinforced partial aromatic polyamide

    Guster, C., Pinter, G., Eichlseder, W. & Lang, R., 2009, 12th International Conference on Fracture, ICF 13. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  155. Published

    Einfluss von Faserorientierung, Temperatur und Feuchtigkeit auf das Schwingfestigkeitsver-halten von spritzgegossenen kurzfaserverstärkten Thermoplasten

    Gaier, C., Fleischer, H., Guster, C. & Pinter, G., 2009, 36. Tagung DVM-Arbeitskreis Betriebsfestigkeit - Einflussgrößen auf die Betriebsfestigkeit bei der Bauteil- und Systementwicklung. p. 121-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  156. Published

    Estimation of reinforcement in compatibilized polypropylene nanocomposites by extensional rheology

    Laske, S., Kracalik, M., Gschweitl, M., Feuchter, M., Maier, G., Pinter, G., Thomann, R., Friesenbichler, W. & Langecker, G., 2009, In: Journal of Applied Polymer Science. 111, p. 2253-2259

    Research output: Contribution to journal › Article › Research › peer-review

  157. Published

    Estimation of reinforcement in compatibilized polypropylene nanocomposites by extensional rheology

    Laske, S., Kracalik, M., Gschweitl, M., Feuchter, M., Maier, G., Pinter, G., Thomann, R., Friesenbichler, W. & Langecker, G., 2009, In: VLK-News. 17. Jahrg., p. 6-8

    Research output: Contribution to journal › Article › Research › peer-review

  158. Published

    Fatigue propagation test development for polymer-matrix fibre-reinforced laminates

    Brunner, A., Paris, I. & Pinter, G., 2009, 12th International Conference on Fracture, ICF 13. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  159. Published

    FT-NIR as a determination method for reinforcement of polymer nanocomposites

    Laske, S., Kracalik, M., Feuchter, M., Pinter, G., Maier, G., Märzinger, W., Haberkorn, M. & Langecker, G., 2009, In: Journal of Applied Polymer Science. 114, p. 2488-2496

    Research output: Contribution to journal › Article › Research › peer-review

  160. Published

    Industrial Production of Polymer Nanocomposites

    Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G. & Langecker, G., 2009, APT09 - Advandes in Plastics Technology - Abstracts of Papers. p. 6-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  161. Published

    Influence of filler surface modification on fracture mechanics of polypropylene / calcium carbonate compounds

    Feuchter, M., Pinter, G., Reisecker, V., Knerr, M. & Pham, T., 2009, Euro Fillers 2009. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  162. Published

    Influence of the cure time on the apparent interlaminar shear strength of the toughened resin transfer moulding system PRIFORM© at a cure temperature of 180 °C

    Wolfahrt, M. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  163. Published

    In-line characterization and quality control of PP nanocomposites using FT-NIR spectroscopy

    Witschnigg, A., Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  164. Published

    In-line quality control of polymer nanocomposites using near-infrared spectroscopy

    Laske, S., Witschnig, A., Kracalik, M., Feuchter, M., Pinter, G., Maier, G., Langecker, G. R. & Holzer, C., 2009, NANOCON 2009 - 1st International Conference, Conference Proceedings. p. 120-125

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  165. Published

    Langzeitversagen von thermoplastischen Rohrwerkstoffen

    Pinter, G. & Frank, A., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  166. Published

    Lifetime prediction of polyethylene pipes based on an accelerated extrapolation concept for creep crack growth with fatigue tests on cracked round bar specimens

    Frank, A., Pinter, G. & Lang, R., 2009, ANTEC 2009 Society of Plastics Engineers' Annual Technical Conference. p. 2169-2174

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  167. Published

    Lifetime Prediction of the Fatigue crack growth (FCG) of high density polyethylene (HDPE) by crack layer theory

    Choi, B.-H., Balika, W., Chudnovsky, A., Pinter, G. & Lang, R., 2009, In: Polymer engineering and science. 49, p. 1421-1428

    Research output: Contribution to journal › Article › Research › peer-review

  168. Published

    Mechanische und thermo-mechanische Charakterisierung von PA-Werkstoffen

    Pilz, G. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  169. Published

    Numerical simulation of the failure behavior of PE pressure pipes with additional loads

    Hutar, P., Sevcik, M., Nahlik, L., Mitev, I., Frank, A. & Pinter, G., 2009, ANTEC 2009 Society of Plastics Engineers' Annual Technical Conference. p. 2163-2168

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  170. Published

    Numerical simulation of the failure behavior of PE pressure pipes with additional loads

    Hutar, P., Sevcik, M., Nahlik, L., Mitev, I., Frank, A. & Pinter, G., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  171. Published

    PCCL Endbericht: Fatigue design methodology for automotive applications of engineering plastics - Part II

    Guster, C. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  172. Published

    Polymere Faserverbundwerkstoffe für Luftfahrtanwendungen

    Pinter, G. & Wolfahrt, M., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  173. Published

    Prediction of the remaining lifetime of polyethylene pipes after up to 30 years in use

    Frank, A., Pinter, G. & Lang, R., 2009, In: Polymer Testing. 49, p. 737-745

    Research output: Contribution to journal › Article › Research › peer-review

  174. Published

    Ranking of PE pipe materials

    Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  175. Published

    Standardisierte Zugprüfungen an Polypropylen/Algen-compounds

    Feuchter, M. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  176. Published

    Studies of the melting behaviour of polypropylene nanocomposites using x-ray diffraction

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  177. Published

    Studies on the melting behavior of polypropylene nano-composites using X-ray diffraction and differential scanning calorimetry

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2009, ANTEC 2009 Society of Plastics Engineers' Annual Technical Conference. p. 2642-2646

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  178. Published

    Thermische Charakterisierung von POM-Bauteilen

    Pilz, G. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  179. Published

    Thermoanalytical investigation of a sieve residue - project: Portucal Viana PM1

    Wallner, G. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  180. Published

    Thermoanalytical investigation of a thermoset sample - project: Florence USA 09

    Wallner, G. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  181. Published

    Thermoanalytical investigation of a thermoset sample - project: Portucal Viana PM1

    Wallner, G. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  182. Published

    Thermoanalytical investigation of a thermoset sample - project: Stora PH PM2 09

    Wallner, G. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  183. Published

    Thermo mechanical characterization of PE and PP materials

    Pilz, G., Pinter, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  184. Published

    Wärmeausdehnung GFK

    Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  185. 2008
  186. Published

    Accelerated investigation of creep crack growth in polyethylene pipe grade materials by the use of fatigue tests on cracked round bar specimens

    Frank, A., Pinter, G. & Lang, R., 2008, ANTEC 2008 Society of Plastics Engineers' Annual Technical Conference. p. 2435-2439

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  187. Published

    Advanced Compounding - Einsatz einer Schmelzepumpe und In-Line NIR Messtechnik für die Aufbereitung von Polypropylen Nanocomposites

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2008, Effizienz im Blickpunkt; Fakten - Technik - Konsequenzen. p. 1-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  188. Published

    Advanced Compounding of Polymer Nanocomposites: Assembling a Melt Pump and In-line Near Infrared Spectroscopy into Extrusion Line

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  189. Published

    Analysis of coloring of PP containers

    Pinter, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  190. Published

    A novel qualification procedure for lifetime and safety assessment of PE pressure pipes for arbitrary installation conditions

    Frank, A., Pinter, G. & Lang, R., 2008, Plastics Pipes XIV (CD). p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  191. Published

    Characterization of the effects of preforming and redeforming on morphology and thermo-mechanical properties of polyethylene close-fit liners for trenchless pipe rehabilitation

    Frank, A., Mannsberger, G., Pinter, G. & Lang, R., 2008, ANTEC 2008 Society of Plastics Engineers' Annual Technical Conference. p. 2251-2255

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  192. Published

    Characterization of the property profile of old PE gas pipes in service for up to 30 years

    Frank, A., Podingbauer, T., Liedauer, S., McCarthy, M., Haager, M. & Pinter, G., 2008, Plastics Pipes XIV (CD). p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  193. Published

    Determination of bearing strength of composites by bold bearing configuration

    Pinter, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  194. Published

    Determination of hierarchical strains in intercalated clay-polypropylene nanocomposites

    Maier, G., Feuchter, M., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  195. Published

    Determination of hierarchical strains in intercalated clay-polypropylene nanocomposites

    Feuchter, M., Maier, G. A., Pinter, G., Kracalik, M., Laske, S. & Langecker, G. R., 2008, Materials Research Society Symposium Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  196. Published

    Determination of interlaminar fracture toughness energy values according to pr DIN EN 6033

    Pinter, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  197. Published

    Fiber orientation and fatigue behavior of a short glass-fiber reinforced partial aromatic polyamide

    Guster, C., Pinter, G., Balika, W., Eichlseder, W. & Lang, R., 2008, 2. Fatigue Symposium Leoben. p. 444-455

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  198. Published

    Fiber orientation and fatigue behaviour of a short glass-fiber reinforced partial aromatic polyamide

    Guster, C., Pinter, G., Balika, W., Eichlseder, W. & Lang, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  199. Published

    FT-NIR AS A QUANTITATIVE DETERMINATION METHOD FOR POLYMER NANOCOMPOSITES

    Laske, S., Kracalik, M., Feuchter, M., Pinter, G., Maier, G., Märzinger, W. & Langecker, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  200. Published

    FT-NIR AS A QUANTITATIVE DETERMINATION METHOD FOR POLYMER NANOCOMPOSITES

    Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G., Märzinger, W., Haberkorn, M. & Langecker, G., 2008, PPS-24. p. 290-290

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  201. Published

    Lebensdauerberechnung für Kunststoffkomponenten

    Unger, B., Fleischer, H., Guster, C. & Pinter, G., 2008, Leichtbaustrategien – Ein wesentlicher Beitrag zur Klimadebatte. p. 39-51

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  202. Published

    Optimization of Compatibilizer Admixture in Polypropylene-Organclay Nanocomposites by Extensional Rheology

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2008, ASPM 2008 - 9th Austrian Polymer Meeting - Book of Abstracts. p. 43-43

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  203. Published

    Preparation of Polymer-Nanocomposite-Masterbatch using a co-rotating twin screw extruder in combination with a melt pump

    Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G. & Langecker, G., 2008, PPS-24. p. 96-96

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  204. Published

    Quality control of polymer nanocomposites compounding using small angle x-ray scattering

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M. & Laske, S., 2008, ASPM 2008 - 9th Austrian Polymer Meeting - Book of Abstracts. p. 53-53

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  205. Published

    Ranking of PE pipe materials

    Pinter, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  206. Published

    Small angle x-ray scattering as method to determine mechanism of despersion in polypropylene clay nanocomposites

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2008, P2008. p. A32-A32

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  207. Published

    The effect of cure condition on the apparent interlaminar shear strength, the glass transition temperature and the interlaminar fracture toughness for a carbon fiber epoxy laminate

    Pinter, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  208. Published

    Zugversuch an einem Composite-Bauteil (IOR flange test)

    Pinter, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  209. 2007
  210. Published

    A340-500/-600 RTM CHF Subcomponent Tests

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  211. Published

    Analyse des Alterungszustandes von PP-Rohren

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  212. Published

    A test concept for lifetime prediction of polyethylene pressure pipes

    Pinter, G., Lang, R. & Haager, M., 2007, In: Monatshefte für Chemie = Chemical monthly. 138, p. 347-355

    Research output: Contribution to journal › Article › Research › peer-review

  213. Published

    Bestimmung der Längenausdehnung von Eisstockzwischenplatten aus PA6 GF40

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  214. Published

    Bestimmung der mechanischen Eigenschaften eines faserverstärkten thermoplastischen Hochleistungswerkstoffes

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  215. Published

    Bestimmung von ausgewählten mechanischen Eigenschaften eines faserverstärkten thermoplastischen Hochleistungswerkstoffes

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  216. Published

    Bestimmung von GIC-Werten in Anlehnung an pr DIN EN 6033

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  217. Published

    Bestimmung von GIC-Werten nach DIN EN 6033 - Part A

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  218. Published

    Bestimmung von ILSS-Werten nach DIN EN ISO 14130

    Wolfahrt, M., Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  219. Published

    Characterisation of the fatigue behavior of short glass fiber reinforced polymers

    Guster, C., Pinter, G., Major, Z., Eichlseder, W. & Lang, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  220. Published

    Characterisation of the fatigue behavior of short glass fiber reinforced polymers

    Guster, C., Pinter, G., Major, Z., Eichlseder, W. & Lang, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  221. Published

    Characterisation of the fatigue behavior of short glass fiber reinforced polymers

    Guster, C., Pinter, G., Major, Z., Eichlseder, W. & Lang, R., 2007, Polymeric Materials in Automotove PMA. p. 47-49

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  222. Published

    Cyclic crack growth tests with CRB specimens for the evaluation of the long-term performance of PE pipe grades

    Pinter, G., Haager, M., Balika, W. & Lang, R., 2007, In: Polymer Testing. 26, p. 180-188

    Research output: Contribution to journal › Article › Research › peer-review

  223. Published

    Fast Determination of Reinforcement in Polymer Nanocomposites

    Kracalik, M., Laske, S., Gschweitl, M., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2007, NanoEurope 2007. p. 13-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  224. Published

    Flatwise Tension Test an Aluminiumkernverbunden

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  225. Published

    Influence of nonylphenol-polyglycol-ether environments on the results of the full notch creep test

    Pinter, G., Haager, M. & Lang, R. W., 2007, In: Polymer Testing. p. 700-710

    Research output: Contribution to journal › Article › Research › peer-review

  226. Published

    In-Plane shear properties of reinforced composites with different fiber volume content

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  227. Published

    Kurzglasfaserverstärkte Kunststoffe - Charakterisierung der Werkstoffanisotropie und Untersuchung deren Einfluss auf das Schwingfestigkeitsverhalten

    Guster, C., Eichlseder, W., Pinter, G. & Lang, R., 2007, In: VLK-News. p. 13-18

    Research output: Contribution to journal › Article › Research › peer-review

  228. Published

    Lifetime and safety assessment of PE pressure pipes based on fracture mechanics fatigue tests

    Pinter, G., Haager, M. & Lang, R., 2007, ANTEC 2007. p. 2921-2925

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  229. Published

    Material qualification - Determinatin of B-values

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  230. Published

    MSRR 1054 Material Change

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  231. Published

    Slow crack growth in PE-HD under static and cyclic loads

    Pinter, G. G., 2007

    Research output: Thesis › Habilitation thesis › peer-review

  232. Published

    Some influences on the fatigue behaviour of short-glasfiber-reinforced polymers

    Guster, C., Pinter, G., Eichlseder, W. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 125-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  233. Published

    Systematic investigations of fatigue crack growth behavior of a PE-HD pipe grade in through-thickness direction

    Balika, W., Pinter, G. & Lang, R., 2007, In: Journal of Applied Polymer Science. p. 1745-1758

    Research output: Contribution to journal › Article › Research › peer-review

  234. Published

    The influence of fiber-orientation and stress ratio on the fatigue behavior of short-glasfiber-reinforced polymers

    Guster, C., Pinter, G., Eichlseder, W. & Lang, R. W., 2007, Society of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007, Conference Proceedings. p. 284-288 5 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  235. Published

    The influence of fiber-orientation and stress ratio on the fatigue behavior of short-glass-fiber-reinforced plastics

    Guster, C., Pinter, G., Eichlseder, W. & Lang, R., 2007, ANTEC 2007. p. 284-288

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  236. Published

    Zugprüfungen an glasfaserverstärkten Composites

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  237. 2006
  238. Published

    Characterisation of the tensile fatigue behaviour of RTM-laminates by isocyclic stress-strain-diagrams

    Pinter, G., Ladstätter, E., Billinger, W. & Lang, R. W., Oct 2006, In: International Journal of Fatigue. 28, 10 SPEC. ISS., p. 1277-1283 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  239. Published

    Accelerated quality assurance tests for PE pipe grades

    Pinter, G., Haager, M. J. & Lang, R., 2006, ANTEC 2006. p. 2480-2484

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  240. Published

    A novel qualification concept for lifetime and safety assessment of PE pressure pipes for arbitrary installation conditions

    Lang, R., Pinter, G., Balika, W. & Haager, M. J., 2006, Plastics Pipes XIII. Plastics Pipes Conference Association, p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  241. Published

    Blind Rivet Pull Out Tests

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  242. Published

    Characterization of the tensile fatigue behaviour of RTM-laminates by isocyclic stress-strain diagrams

    Pinter, G., Ladstätter, E., Billinger, W. & Lang, R., 2006, In: International Journal of Fatigue. p. 1277-1283

    Research output: Contribution to journal › Article › Research › peer-review

  243. Published

    Compression / Inplane Shear Tests

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  244. Published

    DSC-Untersuchungen an PE-HD Bauteilen

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  245. Published

    Effect of artificial defects on the fatigue behavior of RTM laminates

    Pinter, G., Ladstätter, E. & Lang, R. W., 2006, p. 133-137. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  246. Published

    Effect of artificial defects on the fatigue behaviour of RTM laminates

    Pinter, G., Ladstätter, E. & Lang, R., 2006, ANTEC 2006. p. 133-137

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  247. Published

    Ermüdungsversuche an Laminaten

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  248. Published

    Fatigue crack growth and process zone development in a PE-HD pipe grade in through-thickness direction

    Balika, W., Pinter, G. & Lang, R., 2006, In: Advanced engineering materials. p. 1146-1150

    Research output: Contribution to journal › Article › Research › peer-review

  249. Published

    Flatwise Tension Test an Aluminiumkernverbunden

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  250. Published

    Infrared thermographic techniques for non-destructive damage characterization of carbon fibre reinforced polymers during tensile fatigue testing

    Steinberger, R., Leitao, T. I. V., Ladstätter, E., Billinger, W., Pinter, G. & Lang, R., 2006, In: International Journal of Fatigue. p. 1340-1347

    Research output: Contribution to journal › Article › Research › peer-review

  251. Published

    Mechanische und thermoanalytische Tests an Composite Laminaten

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  252. Published

    Ranking of PE pipe grades by cyclic crack growth tests with cracked round bar specimens

    Pinter, G., Haager, M. J. & Lang, R., 2006, ANTEC 2006. p. 2475-2479

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  253. Published

    Ranking of polyethylene pipe materials using fatigue loading of cracked round bar specimens

    Haager, M. J., Pinter, G., Balika, W. & Lang, R., 2006, Plastics Pipes XIII. Plastics Pipes Conference Association, p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  254. Published

    Ranking of Polyethylene pipe materials using fatigue loading of cracked round bar specimens

    Haager, M. J., Pinter, G., Balika, W. & Lang, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  255. Published

    Special topics of polymer science and advanced characterization methods - WP Report "Röntgenkleinwinkelstreuung - Rohrmaterialien"

    Wallner, G. & Pinter, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  256. Published

    Trommelschälversuch an Aluminiumkernverbunden

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  257. 2005
  258. Published

    Anwendung dere SIS/DSC-Methodik auf PE Werkstoffe

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  259. Published

    Applicability and limitations of various fracture mechanical testing concepts under static and cyclic loads

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  260. Published

    Blocker Door fretting fatigue test

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  261. Published

    Blocker Door fretting fatigue test - Karon B coating

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  262. Published

    Brittle and ductile failure behavior of PE pipe grades

    Pinter, G., Major, Z., Haager, M. J. & Lang, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  263. Published

    Characterization of the tensile-compression fatigue behavior of RTM-laminates by isocyclic stress-strain diagrams

    Ladstätter, E., Pinter, G. & Lang, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  264. Published

    Charakterisierung der Auswirkungen unterschiedlicher Laminatvorbehandlung (Sandstrahlen) auf die Oberflächenqualität und den GIC-Wert von verklebten Laminaten

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  265. Published

    Charakterisierung des Ermüdungsrisswachstums in PE mit CT Proben - Methodenentwicklung

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  266. Published

    Charakterisierung des Impactverhaltens von PE-Methodenentwicklung

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  267. Published

    Deformation behavior of polyolefins under monotonic loading - development and implementation of test methods

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  268. Published

    Druckversuche an Composite-Proben - Compression strength and modulus measurements

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  269. Published

    DSC-Messungen an Achsen aus PBT-GF30

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  270. Published

    Effect of frequency, R-ratio and test specimen configuration on fatigue crack growth in PE pipe materials

    Balika, W., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  271. Published

    Ermüdungsrisswachstumsversuche an CT Proben aus PE bei 10 Hz

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  272. Published

    Fatigue behavior of RTM laminates

    Ladstätter, E., Pinter, G., Billinger, W. & Lang, R., 2005, In: VLK-News. p. 4-7

    Research output: Contribution to journal › Article › Research › peer-review

  273. Published

    Fatigue crack growth in PE-HD pipe grades

    Pinter, G., Haager, M. J., Balika, W. & Lang, R., 2005, In: Plastics, rubber and composites. 34, p. 25-33

    Research output: Contribution to journal › Article › Research › peer-review

  274. Published

    Interlaminare Scherfestigkeitsmessungen - Interlaminar sher strength (ILSS) measurements

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  275. Published

    Konzept zur Nachweisführung für Nutzungsdauer und Sicherheit von PE-Druckrohren bei beliebiger Einbausituation

    Lang, R., Pinter, G. & Balika, W., 2005, In: 3 R international. 44, p. 33-41

    Research output: Contribution to journal › Article › Research › peer-review

  276. Published

    Mechanische Eigenschaften kohlenfaserverstärkter RTM-Laminate bei monotoner und zyklischer Zugbelastung

    Ladstätter, E., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  277. Published

    Planung, Bau und Implementierung eines FNCT-Prüfstandes

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  278. Published

    Ranking of PE pipe grades by their failure behavior under impact loads

    Pinter, G., Major, Z., Haager, M. J. & Lang, R., 2005, ANTEC. p. 3551-3555

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  279. Published

    Ranking von PE-Rohrwerkstoffen mittels Ermüdungsrisswachstum

    Hiesch, T. J., Haager, M. J., Pinter, G. & Lang, R., 2005, 10 Tagung Problemseminar: Deformation und Bruchverhalten von Kunststoffen. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  280. Published

    Ranking von PE-Rohrwerkstoffen mittels Ermüdungsrisswachstum

    Hiesch, T. J., Haager, M. J., Pinter, G. & Lang, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  281. Published

    REM Untersuchungen von Pulver-Oberflächen

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  282. Published

    Risswachstumsverhalten von PE-Rohrwerkstoffen

    Haager, M. J., Pinter, G., Balika, W. & Lang, R., 2005, 10 Tagung Problemseminar: Deformation und Bruchverhalten von Kunststoffen. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  283. Published

    Statische Versuche an CT-Proben aus PE

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  284. Published

    Studies of Creep and Fatigue Crack Growth in HD-PE-pipe materials

    Haager, M. J., Pinter, G., Lang, R. & Zhou, W., 2005, ANTEC. p. 3538-3542

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  285. Published

    Tensile-compression fatigue behavior of RTM-laminates

    Ladstätter, E., Pinter, G. & Lang, R., 2005, SAMPE Fall Technical Conference. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  286. Published

    Tensile strength and tensile modulus measurements

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  287. Published

    Test der Subkomponente "lug CHF" Lug subcomponent test

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  288. Published

    Thermoanalytische umd morphologische Untersuchungen an Achsen aus PBT-GF30

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  289. Published

    Thermographische Verfahren zur Schadensdetektion an kohlenstofffaserverstärkten RTM-Laminaten in Ermüdungsversuchen

    Ladstätter, E., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  290. Published

    Through thickness characterization of crack growth and process zone development in cyclically loaded PE-HD

    Balika, W., Pinter, G. & Lang, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  291. Published

    Through-thickness process zone characterization at fatigue cracks in PE-HD

    Balika, W., Pinter, G. & Lang, R., 2005, ANTEC. p. 3512-3516

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  292. Published

    Time and Cycle dependent crack growth and crack tip yielding in PE pipe materials

    Balika, W., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  293. Published

    Trommelschälversuch an Wabenkernverbunden

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  294. Published

    Zugprüfungen an GFK-Kettenelementen

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  295. Published

    Zugprüfungen an Polyazetal (POM)-Ketten

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  296. Published

    Zugprüfungen an Polyoxymethylen (POM)-Ketten

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  297. Published

    Zugprüfungen an PP-und POM-Kettenelementen des Typs Rübig 50

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  298. Published

    Zugversuch an einem Composite - Bauteil IP 980 flange test

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  299. 2004
  300. Published

    Estimation of slow crack growth behavior in polyethylene after stepwise isothermal crystallization

    Haager, M., Pinter, G. & Lang, R. W., Oct 2004, In: Macromolecular Symposia. 217, p. 383-390 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  301. Published

    A fatigue approach for lifetime prediction of PE-HD pipe grades

    Balika, W., Pinter, G., Choi, B.-H. & Lang, R., 2004, Society of Plastics Engineers. p. 4028-4032

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  302. Published

    Aktuelles aus Wissenschaft und Forschung - Kunststoffrohre 2004: 18. Leobener Kunststoffkolloquium

    Pinter, G. (Editor) & Lang, R. (Editor), 2004, Leoben: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  303. Published

    Applicability and limitations of the FNCT-methodology to predict the long term failure behavior of polyethylene-pipe materials

    Haager, M., Pinter, G. & Lang, R. W., 2004, p. 4023-4027. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  304. Published

    Applicability and limitations of the FNCT-methodology to predict the long term failure behaviour of polyethylene pipe materials

    Haager, M. J., Pinter, G. & Lang, R., 2004, Society of Plastics Engineers. p. 4023-4027

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  305. Published

    Applicability of linear elastic fracture mechanics to fatigue in amorphous and semi-crystalline polymers

    Lang, R., Balika, W. & Pinter, G., 2004, The Application of Fracture Mechanics to Polymers, Adhesvies and Composites. p. 83-92

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  306. Published

    Beschleunigte Prüfmethoden zur Charakterisierung des Langzeitversagensverhaltens von thermoplastischen Rohrwerkstoffen

    Haager, M. J., Pinter, G. & Lang, R., 2004, Aktuelles aus Wissenschaft und Forschung - Kunststoffrohre 2004. Polymer Competence Center Leoben, Institut für Werkstoffkunde und -prüfung der Kunststoffe, p. VI-1-VI-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  307. Published

    Characterisation of the fatigue behaviour of RTM-laminates by isocyclic stress-strain diagrams

    Ladstätter, E., Pinter, G., Billinger, W. & Lang, R., 2004, Society of Plastics Engineers. p. 1379-1383

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  308. Published

    Characterization of the fatigue behavior of RTM-laminates by isocyclic stress-strain diagrams

    Ladstätter, E., Pinter, G., Billinger, W. & Lang, R. W., 2004, p. 1379-1383. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  309. Published

    Creep crack growth in high density polyethylene

    Pinter, G. & Lang, R., 2004, The Application of Fracture Mechanics to Polymers, Adhesvies and Composites. p. 49-54

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  310. Published

    Ermüdungsrisswachstum in PE-Rohrwerkstoffen

    Haager, M. J., Pinter, G. & Lang, R., 2004, In: 3 R international. p. 492-496

    Research output: Contribution to journal › Article › Research › peer-review

  311. Published

    Ermüdungsverhalten karbonfaserverstärkter RTM-Laminate

    Ladstätter, E., Pinter, G., Billinger, W. & Lang, R., 2004, Int. Conference, European Chapter. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  312. Published

    Estimation of slow crack growth behavior in Polyethylen after stepwise isothermal segregation

    Haager, M. J., Pinter, G. & Lang, R., 2004, In: Macromolecular Symposia. 217, p. 383-390

    Research output: Contribution to journal › Article › Research › peer-review

  313. Published

    Investigation of heat dissipation of RTM laminates under tensile fatigue loading by thermography

    Leitao, T. I. V., Steinberger, R., Ladstätter, E., Pinter, G., Billinger, W. & Lang, R., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  314. Published

    Investigations of the crack tip deformation zone in polyethylene pipe materials using scanning small angle X-ra scattering (sSAXS)

    Maier, G., Pinter, G. & Fratzl, P., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  315. Published

    Local deformation and failure at crack tips in thermoplastic pipe grades

    Pinter, G., Balika, W. & Lang, R., 2004, Aktuelles aus Wissenschaft und Forschung - Kunststoffrohre 2004. Polymer Competence Center Leoben, Institut für Werkstoffkunde und -prüfung der Kunststoffe, p. IX-1-IX-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  316. Published

    Moderne Prüfmethoden für Polyethylen-Rohrwerkstoffe

    Haager, M. J., Pinter, G. & Lang, R., 2004, In: VLK-News. p. 2-3

    Research output: Contribution to journal › Article › Research › peer-review

  317. Published

    Ranking of PE-HD pipe grades by fatigue crack growth performance

    Pinter, G., Haager, M. J., Balika, W. & Lang, R., 2004, Plastics Pipes XII. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  318. Published

    Thermo-oxidative degradation during creep crack growth of PE-HD grades as assessed by FT-IR spectroscopy

    Pinter, G., Haager, M. J., Wolf, C. & Lang, R., 2004, In: Macromolecular Symposia. 217, p. 307-316

    Research output: Contribution to journal › Article › Research › peer-review

  319. 2003
  320. Published

    Advanced methodologies for the characterisation of the performance of long-term thermal antioxidants

    Pinter, G. & Lang, W. R., 2003, p. 124-128. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  321. Published

    Advanced methodologies for the characterization of the performance of long-term thermal antioxidants

    Pinter, G. & Lang, R., 2003, 3. European Additives and Colors Conference. p. 124-128

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  322. Published

    Effect of stabilization on creep crack growth in High-Density Polyethylene

    Pinter, G. & Lang, R., 2003, In: Journal of Applied Polymer Science. 90, p. 3191-3207

    Research output: Contribution to journal › Article › Research › peer-review

  323. Published

    Einsatz von statischen und zyklischen bruchmechanischen Methoden zur Charakterisierung von Polyethylen Rohrleitungswerkstoffen

    Haager, M. J., Pinter, G., Fanesi, E. & Lang, R., 2003, 6. Bregenzer Rohrleitungstage – Fachausstellung. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  324. Published

    Estimation of slow crack growth behaviour in Polyethylene after stepwise isothermal segregation

    Haager, M. J., Pinter, G. & Lang, R., 2003.

    Research output: Contribution to conference › Poster › Research › peer-review

  325. Published

    Prüfmethoden für die Entwicklung von Rohrwerkstoffen

    Pinter, G., Pilz, G., Balika, W. & Lang, R., 2003, Polymeric Solar Materials. p. IX-1-IX-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  326. 2002
  327. Published

    Characterisation of the thermo-oxidative degradation of polyethylene pipes by chromatographical, rheological and thermo-analytical methods

    Pinter, G., Duretek, I., Aust, N. & Lang, R. W., 24 Jun 2002, In: Macromolecular Symposia. 181, p. 213-223 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  328. Published

    A correlation of creep and fatigue crack growth in high density polyethylen at various temperatures

    Pinter, G., Balika, W. & Lang, R., 2002, Temperatur-Fatigue Interaction. p. 267-277

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  329. Published

    A correlation of creep and fatigue crack growth in high density poly(ethylene) at various temperatures

    Pinter, G., Balika, W. & Lang, R. W., 2002, In: ESIS publication / European Structural Integrity Society. 29, C, p. 267-275 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  330. Published

    Bruchmechanische Charakterisierung und Simulation des Zeitstandverhaltens von Rohren aus PE-HD

    Pinter, G. & Lang, R., 2002.

    Research output: Contribution to conference › Poster › Research › peer-review

  331. Published

    Bruchmechanische Charakterisierung und Simulation des Zeitstandverhaltens von Rohren aus PE-HD

    Pinter, G. & Lang, R., 2002, 7. Tagung Gefüge und Bruch. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  332. Published

    Characterisation of the effects of surface treatment of graphite as a filler in Polypropylene (PP) on fracture toughness under monotonic and cyclic loads

    Pinter, G., Schnetzinger, K., Lang, R., Lederer, K. & Zipper, P., 2002, Polymerwerkstoffe 2002. p. 557-560

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  333. Published

    Characterisation of the Thermo-Oxidative Degradation of Polyethylene Pipes by Chromatographical, Rheological and Thermoanalytical Methods

    Pinter, G., Duretek, I., Aust, N. & Lang, R., 2002, In: Macromolecular Symposia. 181, p. 213-213

    Research output: Contribution to journal › Article › Research › peer-review

  334. Published

    Ermüdungsrisswachstum in thermoplastischen Polymeren

    Pinter, G., Balika, W., Zahnt, B.-A. & Lang, R., 2002, 7. Tagung Gefüge und Bruch. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  335. Published

    Ermüdungsrisswachstum in thermoplastischen Polymeren

    Pinter, G., Balika, W., Zahnt, B.-A. & Lang, R., 2002.

    Research output: Contribution to conference › Poster › Research › peer-review

  336. Published

    Fatigue crack growth in PE-HD

    Pinter, G. & Lang, R., 2002.

    Research output: Contribution to conference › Poster › Research › peer-review

  337. Published

    To know why is to know how - Compoundentwicklung mit Hilfe von Simulationstools und Strukturuntersuchungen

    Schnetzinger, K., Pinter, G., Rieß, G., Lederer, K. & Zipper, P., 2002, In: VLK-News. p. 12-14

    Research output: Contribution to journal › Article › Research › peer-review

  338. 2001
  339. Published

    Applicability and limitations of current lifetime prediction models for thermoplastics pipes under internal pressure

    Lang, R., Pinter, G. & Stern, A., 2001, Plastics Pipes XI. p. 329-338

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  340. Published

    Facture mechanics characterisation of effects of stabilisers on creep crack growth in Polyethylene pipes

    Pinter, G. & Lang, R., 2001, In: Plastics, rubber and composites. 30, p. 94-100

    Research output: Contribution to journal › Article › Research › peer-review

  341. Published

    Fracture mechanics characterisation of effects of stabilisers on creep crack growth in polyethylene pipes

    Pinter, G. & Lang, R. W., 2001, In: Plastics, Rubber and Composites Processing and Applications. 30, 2, p. 94-100 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  342. Published

    The influence of local ageing on brittle failure of thermoplastics pipes

    Pinter, G. & Lang, R., 2001, Plastics Pipes XI. p. 853-862

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  343. Published

    The influence of local ageing on brittle failure of thermoplastics pipes

    Pinter, G. & Lang, R., 2001.

    Research output: Contribution to conference › Poster › Research › peer-review

  344. 2000
  345. Published

    Aging effects and fracture mechanical lifetime modelling of pressurized Polyethylene pipes

    Lang, R., Pinter, G. & Stern, A., 2000, ECF 13. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  346. Published

    Aging effects and fracture mechanical lifetime modelling of pressurized Polyethylene pipes

    Lang, R., Pinter, G. & Stern, A., 2000.

    Research output: Contribution to conference › Poster › Research › peer-review

  347. Published

    Characterisation of stabiiser effects on the creep crack growth failure behaviour of polyethylene pipes using a fracture mechanics approach

    Pinter, G. & Lang, R., 2000, Yield and Fracture of Polymers. p. 425-430

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  348. Published

    Characterisation of stabiliser effects on the creep crack growth failure behaviour of polyethylene pipes using a fracture mechanics approach

    Pinter, G. & Lang, R., 2000.

    Research output: Contribution to conference › Poster › Research › peer-review

  349. Published

    Creep and fatigue crack growth in PE-HD pipe grades - Effect of test temperature and R-ratio

    Pinter, G., 2000, ECF 13. p. 5-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  350. Published

    Creep and fatigue crack growth in PE-HD pipe grades - Effect of test temperature and R-ratio

    Pinter, G., Balika, W. & Lang, R., 2000.

    Research output: Contribution to conference › Poster › Research › peer-review

  351. Published

    Innovationen und Entwicklungstendenzen auf dem Gebiet der Faser/kunststoff-Verbunde: 16. Leobener Kunststoffkolloquium

    Lang, R. (Co-editor) & Pinter, G. (Co-editor), 2000, Leoben: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  352. Published

    Neue Prüfkonzepte zur Charakterisierung von Polyolefinen

    Lang, R., Pilz, G., Pinter, G. & Stern, A., 2000, In: Plastics-special. 6, p. 26-31

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 Next
View graph of relations

Contact

Phone: 2100

Curriculum vitae

Gerald Pinter Öffentliches Curriculum

Latest Research Output

View more (839)