Emanuel Schwaighofer
(Former)
Research output
- 2017
- Published
Contribution of High-Energy X-Rays and Neutrons to Characterization and Development of Intermetallic Titanium Aluminides
Schmoelzer, T., Liss, K.-D., Staron, P., Stark, A., Schwaighofer, E., Lippmann, T., Clemens, H. & Mayer, S., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 395-424Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
- 2015
- Published
Decording the nanostructure of advanced TiAl alloys
Schwaighofer, E., Staron, P., Rashkova, B., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2015, 2 p.Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
In-situ study of the time-temperature-transformation behaviour of a multi-phase intermetallic beta-stabilised TiAl alloy
Erdely, P., Werner, R., Schwaighofer, E., Clemens, H. & Mayer, S., 2015, In: Intermetallics. 57, p. 17-24Research output: Contribution to journal › Article › Research › peer-review
- Published
In-situ study of the time-temperature-transformation behaviour of an intermetallic γ-TiAl based alloy
Erdely, P., Werner, R., Schwaighofer, E., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2015.Research output: Contribution to conference › Presentation › Research › peer-review
- 2014
- Published
Constitutive analysis and microstructure evolution of the high-temperature deformation behavior of an advanced intermetallic multi-phase gamma-TiAl-based alloy
Werner, R., Schwaighofer, E., Schloffer, M., Clemens, H., Lindemann, J. & Mayer, S., 2014, Advanced Materials Research. p. 807-812Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Effect of carbon addition on solidification behavior, phase evolution and creep properties of an intermetallic beta-stabilized gamma-TiAl based alloy
Schwaighofer, E., Rashkova, B., Clemens, H., Stark, A. & Mayer, S., 2014, In: Intermetallics. 46, p. 173-184Research output: Contribution to journal › Article › Research › peer-review
- Published
Entwicklung einer hochfesten und kriechresistenten γ-TiAl Basislegierung für Strahltriebwerkskomponenten
Schwaighofer, E., 2014Research output: Thesis › Doctoral Thesis
- Published
Evolution of the omega-phase in a beta-stabilized multi-phase TiAl alloy and its effect on the hardness
Rashkova, B., Schloffer, M., Schöberl, T., Schwaighofer, E., Zhang, Z., Mayer, S. & Clemens, H., 2014.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Evolution of the ordered omega phase in a beta-stabilized multi-phase TiAl alloy and its effect on hardness
Schloffer, M., Rashkova, B., Schöberl, T., Schwaighofer, E., Zhang, Z., Clemens, H. & Mayer, S., 2014, In: Acta materialia. 64, p. 241-252Research output: Contribution to journal › Article › Research › peer-review
- Published
Hot-working behavior of an advanced intermetallic multi-phase gamma-TiAl based alloy
Schwaighofer, E., Clemens, H., Lindemann, J., Stark, A. & Mayer, S., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 614, p. 297-310Research output: Contribution to journal › Article › Research › peer-review
- Published
In-situ small-angle X-ray scattering study of the Perovskite-type carbide precipitation behavior in a carbon-containing intermetallic TiAl alloy using synchrotron radiation: DESY Annual Report 2013
Schwaighofer, E., Staron, P., Rashkova, B., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2014Research output: Non-textual form › Web publication/site › Transfer
- Published
In-situ small-angle X-ray scattering study of the Perovskite-type carbide precipitation behavior in a carbon-containing intermetallic TiAl alloy using synchrotron radiation
Schwaighofer, E., Staron, P., Rashkova, B., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2014, In: Acta materialia. 77, p. 360-369Research output: Contribution to journal › Article › Research › peer-review
- Published
In-situ time-temperature-transformation behaviour of an intermetallic beta-solidifying TiAl alloy using synchrotron radiation
Erdely, P., Werner, R., Schwaighofer, E., Clemens, H. & Mayer, S., 2014.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Microstructural design and mechanical properties of a cast and heat-treated intermetallic multi-phase gamma-TiAl based alloy
Schwaighofer, E., Clemens, H., Mayer, S., Lindemann, J., Klose, J., Smarsly, W. & Guether, V., 2014, In: Intermetallics. 44, p. 128-140Research output: Contribution to journal › Article › Research › peer-review
- Published
The use of in-situ characterization techniques for the development of intermetallic titanium aluminides
Mayer, S., Schwaighofer, E., Schloffer, M. & Clemens, H., 2014, Materials Science Forum. p. 2097-2102Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- 2013
- Published
Advanced beta-solidiying titanium aluminides – Development status and perspectives
Clemens, H., Schloffer, M., Schwaighofer, E., Werner, R., Gaitzenauer, A., Rashkova, B., Schmölzer, T., Pippan, R. & Mayer, S., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 3-16Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Constitutive analysis and microstructure evolution of the high-temperature deformation behavior of an advanced intermetallic multi-phase gamma-TiAl-based alloy
Werner, R., Schwaighofer, E., Schloffer, M., Clemens, H., Lindemann, J. & Mayer, S., 2013.Research output: Contribution to conference › Poster › Research › peer-review
- Published
In situ high-energy XRD study of the hot-deformation behavior of a novel gamma-TiAl alloy
Stark, A., Schwaighofer, E., Mayer, S., Clemens, H., Lippmann, T., Lottermoser, L., Schreyer, A. & Pyczak, F., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 71-76Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Thermodynamic calculations of phase equilibria and phase fractions of a beta-solidifying TiAl alloy using the CHALPAD approach
Werner, R., Schloffer, M., Schwaighofer, E., Clemens, H. & Mayer, S., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 59-64Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- 2012
- Published
Influence of heat treatments on the microstructure of a multi-phase titanium aluminide alloy
Schwaighofer, E., Schloffer, M., Schmölzer, T., Mayer, S., Lindemann, J., Guether, V., Klose, J. & Clemens, H., 2012, In: Practical metallography = Praktische Metallographie. 49, p. 124-137Research output: Contribution to journal › Article › Research › peer-review
- Published
In situ forging experiments at HARWI II with advanced TiAl alloys: HASYLAB Annual Report
Stark, A., Schwaighofer, E., Mayer, S., Lottermoser, L., Lippmann, T., Oehring, M., Clemens, H., Pyczak, F. & Schreyer, A., 2012Research output: Non-textual form › Web publication/site › Research
- Published
In situ study of the hot-working behavior of an advanced intermetallic multi-phase gamma-TiAl based alloy: HASYLAB Annual Report
Schwaighofer, E., Stark, A., Lottermoser, L., René, K., Clemens, H., Mayer, S. & Schell, N., 2012Research output: Non-textual form › Web publication/site › Research
- Published
In situ synchrotron radiation study during hot compressive deformation of a novel gamma TiAl alloy
Stark, A., Schwaighofer, E., Mayer, S., Lippmann, T., Lottermoser, L., Pyczak, F., Clemens, H. & Schreyer, A., 2012.Research output: Contribution to conference › Poster › Research › peer-review
- Published
In situ synchrotron study of B19 phase formation in an intermetallic gamma-TiAl alloy
Schmölzer, T., Stark, A., Schwaighofer, E., Lippmann, T., Mayer, S. & Clemens, H., 2012, In: Advanced engineering materials. 14, p. 445-448Research output: Contribution to journal › Article › Research › peer-review
- Published
Microstructural evolution and mechanical properties of a cast and heat-treated TiAl alloy
Schwaighofer, E., Lindemann, J., Klose, J., Guether, V., Schloffer, M., Schmölzer, T., Clemens, H. & Mayer, S., 2012.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Microstructure development and hardness of a powder metallurgical multi phase y-TiAl based alloy
Schloffer, M., Iqbal, F., Gabrisch, H., Schwaighofer, E., Schimansky, F.-P., Mayer, S., Stark, A., Lippmann, T., Göken, M., Pyczak, F. & Clemens, H., 2012, In: Intermetallics. 22, p. 231-240Research output: Contribution to journal › Article › Research › peer-review
- Published
Mikrostruktur und mechanische Eigenschaften einer intermetallischen gamma TiAl-Basislegierung für Leichtbauanwendungen: Forum für Metallurgie und Werkstofftechnik
Schwaighofer, E., Mayer, S. & Clemens, H., 2012Research output: Non-textual form › Web publication/site › Research
- 2011
- Published
Phase fraction evolution in a multi-phase intermetallic gamma-TiAl based alloy: HASYLAB Annual Report
Schwaighofer, E., Schloffer, M., Schmölzer, T., Clemens, H., Stark, A., Staron, P., Lippmann, T. & Mayer, S., 2011Research output: Non-textual form › Web publication/site › Research
- Published
Physical Metallurgy and Properties of ß-solidifying TiAl Based Alloys
Clemens, H., Schmölzer, T., Schloffer, M., Schwaighofer, E., Mayer, S. & Dehm, G., 2011, Materials Research Society symposium proceedings Volume 1295. Materials Research Society : MRS, p. 95-100Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
The Characterisation of a Powder Metallurgically Manufactured TNMTM Titanium Aluminide Alloy Using Complimentary Quantitative Methods
Schloffer, M., Schmölzer, T., Mayer, S., Schwaighofer, E., Hawranek, G., Schimansky, F.-P., Pyczak, F. & Clemens, H., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 594-604Research output: Contribution to journal › Article › Research › peer-review
- 2010
- Published
Charakterisierung einer Pulvermetallurgisch hergestellten TNM TM-Titanaluminid Legierung mittels komplementärer quantitativer Methoden
Schloffer, M., Schmölzer, T., Mayer, S., Schwaighofer, E., Hawranek, G., Schimansky, F.-P., Pyczak, F. & Clemens, H., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 239-244Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Einfluss von Wärmebehandlungen auf das Gefüge einer mehrphasigen Titanalumind-Legierung
Schwaighofer, E., Schloffer, M., Schmölzer, T., Mayer, S., Clemens, H. & Guether, V., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 221-226Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Einfluss von Wärmebehandlungen auf die Mikrostruktur und mechanischen Eigenschaften gegossener und heißisostatisch gepresster TNM™-Legierungen
Schwaighofer, E., 2010Research output: Thesis › Diploma Thesis
- Published
The effect of Si on phase fractions and transition temperatures of a TiAl-Mo alloy: HASYLAB Annual Report
Schmölzer, T., Mayer, S., Schwaighofer, E., Lippmann, T., Staron, P., Stark, A. & Clemens, H., 2010Research output: Non-textual form › Web publication/site › Research