Ebrahim Karimi Sibaki

51 - 90 out of 90Page size: 50

Research output

  1. 2019
  2. Published

    Investigations on Collective Motion of Cathode Spots in the VAR Process

    Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 2019, p. 11-16.

    Research output: Contribution to conference › Paper › peer-review

  3. Published

    Modeling Electrochemical Transport of Ions in the ESR Process

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 2019, p. 131-138.

    Research output: Contribution to conference › Paper › peer-review

  4. Published

    Numerical Investigation of the Vacuum Arc Remelting (VAR) Process

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Bohacek, J., Holzgruber, H., Ofner, B., Scheriau, A. & Kubin, M., 2019, p. 55-62.

    Research output: Contribution to conference › Paper › peer-review

  5. 2018
  6. Published

    Numerical Investigation of Collective Motion of Cathode Spots

    Kharicha, A., Karimi-Sibaki, E., Ludwig, A. & Wu, M., 15 Nov 2018, 28th International Symposium on Discharges and Electrical Insulation in Vacuum: ISDEIV. Institute of Electrical and Electronics Engineers, Vol. 2. p. 467-469 3 p. (International Symposium on Discharges and Elevtrical Insultaion in Vacuum, ISDEIV).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Electro-vortical MHD Interface Instabilities

    Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., Oct 2018.

    Research output: Contribution to conference › Paper › peer-review

  8. Published

    Contribution of an Electro-Vortex Flow to Primary, Secondary, and Tertiary Electric Current Distribution in an Electrolyte

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 7 Sept 2018, In: Journal of the Electrochemical Society. 165.2018, 11, p. E604-E615 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Effect of an Electrically-Conducting Wall on Transient Magnetohydrodynamic Flow in a Continuous-Casting Mold with an Electromagnetic Brake

    Liu, Z., Vakhrushev, A., Wu, M., Karimi-Sibaki, E., Kharicha, A., Ludwig, A. & Li, B., 4 Aug 2018, In: Metals : open access journal . 8.2018, 8, 14 p., 609.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Use of a mixed columnar-equiaxed solidification model to analyse the formation of as-cast structure and macrosegregation in a Sn-10 wt% Pb benchmark experiment

    Zheng, Y., Wu, M., Karimi-Sibaki, E., Kharicha, A. & Ludwig, A., 1 Jul 2018, In: International journal of heat and mass transfer. 122.2018, July, p. 939-953 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Heat Transfer Coefficient at Cast-Mold Interface During Centrifugal Casting: Calculation of Air Gap

    Bohacek, J., Kharicha, A., Ludwig, A., Wu, M. & Karimi-Sibaki, E., 12 Mar 2018, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 49.2018, 3, p. 1421-1433 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Review on Modeling and Simulation of Electroslag Remelting

    Kharicha, A., Karimi-Sibaki, E., Wu, M., Ludwig, A. & Bohacek, J., 1 Jan 2018, In: Steel research international. 89.2018, 1, 20 p., 1700100.

    Research output: Contribution to journal › Review article › peer-review

  13. Published

    Simulation in metallurgy: Past achievements and future challenges

    Bohacek, J., Koutna, N., Ludwig, A., Rodrigues, C., Karimi-Sibaki, E. & Kharicha, A., 1 Jan 2018, 27th International Conference on Metallurgy and Materials, METAL 2018. p. 28-33 6 p. (IOP Conference Series: Materials Science and Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. 2017
  15. Published

    A (non-)hydrostatic free-surface numerical model for two-layer flows

    Bohacek, J., Kharicha, A., Ludwig, A., Wu, M., Karimi-Sibaki, E., Paar, A., Brandner, M., Elizondo, L. & Trickl, T., 18 Apr 2017, In: Applied Mathematics and Computation. 319.2018, 15 February, p. 301-317 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    12. Karimi-Sibaki E., Kharicha A., Wu M., Bohacek J., Ludwig A., Steel Res. Int., Vol. 88 (5), 2017, DOI: 10.1002/srin.201770051. “Cover Picture: steel research int. 5/2017”

    Karimi Sibaki, E., Wu, M., Ludwig, A., Bohacek, J. & Kharicha, A., 2017

    Research output: Other contribution › Research

  17. Published

    Toward Modeling of Electrochemical Reactions during Electroslag Remelting (ESR) Process

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 2017, In: Steel research international. 88.2017, 5, 8 p., 170001.

    Research output: Contribution to journal › Article › Research › peer-review

  18. 2016
  19. Published

    An attempt to model electrode change during the ESR process

    Karimi-Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B., Scheriau, A., Kubin, M. & Ramprecht, M., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012006.

    Research output: Contribution to journal › Conference article › peer-review

  20. Published

    A numerical study on electrochemical transport of ions in calcium fluoride slag

    Karimi-Sibaki, E., Kharicha, A., Wu, M. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012008.

    Research output: Contribution to journal › Conference article › peer-review

  21. Published

    Transient melting of an ESR electrode

    Kharicha, A., Karimi-Sibaki, E., Bohacek, J., Wu, M. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012003.

    Research output: Contribution to journal › Conference article › peer-review

  22. Published

    On Validity of Axisymmetric Assumption for Modeling an Industrial Scale Electroslag Remelting Process

    Karimi Sibaki, E., Kharicha, A., Bohacek, J., Wu, M. & Ludwig, A., 1 Feb 2016, In: Advanced engineering materials. 18.2016, 2, p. 224-230 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Simulation of the Electric Signal During the Formation and Departure of Droplets in the Electroslag Remelting Process

    Kharicha, A., Wu, M., Ludwig, A. & Karimi Sibaki, E., 25 Jan 2016, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 47.2016, 2, p. 1427-1434 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Multiphysics simulation of electroslag remelting process

    Karimi Sibaki, E., 2016

    Research output: Thesis › Doctoral Thesis

  25. Published

    Simulation of the Electrical Signal During the Formation and Departure of Droplets in the Electro Slag Remelting Process

    Kharicha, A., Wu, M., Ludwig, A. & Karimi Sibaki, E., 2016, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science.

    Research output: Contribution to journal › Article › Research › peer-review

  26. 2015
  27. E-pub ahead of print

    A Dynamic Mesh-Based Approach to Model Melting and Shape of an ESR Electrode

    Karimi-Sibaki, E., Kharicha, A., Bohacek, J., Wu, M. & Ludwig, A., 11 Jun 2015, (E-pub ahead of print) In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 46.2015, 5, p. 2049-2061 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    An attempt to model electrode change during the ESR process

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B., Scheriau, A., Kubin, M. & Ramprecht, M., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    A numerical study on electrochemical transport of ions in calcium fluoride slag

    Karimi Sibaki, E., Kharicha, A., Wu, M. & Ludwig, A., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Transient melting of an ESR electrode

    Kharicha, A., Karimi Sibaki, E., Bohacek, J., Wu, M. & Ludwig, A., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. 2014
  32. Published

    Advanced Process Simulation of Solidification and Melting

    Wu, M., Vakhrushev, A., Karimi Sibaki, E., Kharicha, A. & Ludwig, A., 15 Jan 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159.2014, 1, p. 30-40 11 p.

    Research output: Contribution to journal › Article › Research

  33. Published

    Annual report of CD-Lab activity during 2014, Project progress and achievements.

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Vakhrushev, A., 2014

    Research output: Book/Report › Commissioned report › Transfer

  34. Published

    "A parameter study on the effect of slag electrode conductivity on the solidification of a large scale ESR ingot"

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B. & Ramprecht, M., 2014, 2nd Int. Conf. Ingot Casting Rolling Forging, on data storage device..

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    "How to get a smooth ESR Ingot surface?"

    Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 2014, 2nd Int. Conf. Ingot Casting Rolling Forging on data storage device..

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Influence of crystal morphological parameters on the solidification of ESR ingot

    Karimi Sibaki, E., Kharicha, A., Korp, J., Wu, M. & Ludwig, A., 2014, Materials Science Forum. Vol. 790-791.2014. p. 396-401 (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  37. 2013
  38. Published

    Contribution of the mould current to the ingot surface quality in the electroslag remelting process

    Kharicha, A., Sibaki, E. K., Wu, M. & Ludwig, A., 1 Jan 2013, International Symposium on Liquid Metal Processing and Casting 2013, LMPC 2013. p. 95-99 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    "2D simulation of ESR process"

    Karimi Sibaki, E., Kharicha, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  40. Published

    A Numerical Study on the Influence of the Frequency of the Applied AC Current on the Electroslag Remelting Process"

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B. & Ramprecht, M., 2013, A Numerical Study on the Influence of the Frequency of the Applied AC Current on the Electroslag Remelting Process". p. 13-19

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    "Contribution of the Mould Current to the Ingor Surface quality in the Electroslag Remelting Process"

    Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 2013, "Contribution of the Mould Current to the Ingor Surface quality in the Electroslag Remelting Process". p. 95-99

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    "Minutes of the fall meeting on project "Electromagnetic processing of dual-phase fluids"

    Karimi Sibaki, E., Wu, M. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Minutes of the spring meeting on project "Electromagnetic processing of dual-phase fluids"

    Karimi Sibaki, E., Wu, M. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Minutes of the summer meeting on project "Electromagnetic processing of dual-phase fluids"

    Karimi Sibaki, E., Wu, M. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer

  45. Published

    "Parameter study of large scale ESR process"

    Karimi Sibaki, E., Kharicha, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. 2012
  47. Published

    Influence of the earth magnetic field on electrically induced flows

    Kharicha, A., Wu, M., Ludwig, A. & Karimi Sibaki, E., 2012, In: Journal of iron and steel research international. 19, p. 63-66

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Jahresbericht CD-Labor für Prozesssimulation von Erstarrungs-und Umschmelzvorgängen Modul II

    Karimi Sibaki, E., Wu, M. & Ludwig, A., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1 2 Next
View graph of relations

Contact

Phone: 3115

Latest Research Output

View more (90)