Clemens Holzer

101 - 120 out of 376Page size: 20

Research output

  1. 2018
  2. Published

    Feedstocks for the Shaping-Debinding-Sintering Process of Multi Material Components

    Cano Cano, S., Kukla, C., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben, Vol. 27. p. 255 -256 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Highly-filled Polymers for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Holzer, C. & Kukla, C., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben, Vol. 27. p. 93-102 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Material Extrusion Additive Manufacturing for Photocatalytic Applications

    Gonzalez-Gutierrez, J., Jiang, W., Lichal, C., Schuschnigg, S., Huang, L. & Holzer, C., 19 Apr 2018, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  5. Published

    Material Extrusion Additive Manufacturing for Photocatalytic Applications

    Gonzalez-Gutierrez, J., Jiang, W., Lichal, C., Schuschnigg, S., Huang, L. & Holzer, C., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben, Vol. 27. p. 259-260 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Reciclado de sólidos de orificios de perforación en polímeros

    Hofstätter, H. (Inventor) & Holzer, C. (Inventor), 16 Jan 2018, IPC No. C08K 3/ 34 A I, Patent No. ES2650001T, Priority date 14 Sept 2012, Priority No. WO2012EP68165

    Research output: Patent

  7. Published

    RECYCLING OF BOREHOLE SOLIDS IN POLYMERS

    Hofstätter, H. (Inventor) & Holzer, C. (Inventor), 13 Jan 2018, Patent No. NO2756028T, Priority date 14 Sept 2012, Priority No. WO2012EP68165

    Research output: Patent

  8. 2017
  9. Published

    Calculation of the contact Angle of Polymer Melts on Tool Surfaces from Viscosity Parameters

    Zitzenbacher, G., Dirnberger, H., Längauer, M. & Holzer, C., 30 Dec 2017, In: Polymers. 10.2017, 38, 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Optimization of Mechanical Properties of Glass-Spheres-Filled Polypropylene Composites for Extrusion-Based Additive Manufacturing

    Spörk, M., Savandaiah, C., Arbeiter, F., Sapkota, J. & Holzer, C., 26 Dec 2017, In: Polymer Composites. 40.2019, 2, p. 638-651 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Special Binder Systems for Metal Powders in Highly Filled Filaments for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Cano Cano, S., Ecker, J., Arbeiter, F., Burkhardt, C., Hampel, S., Kukla, C. & Holzer, C., 14 Dec 2017, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  12. Published

    Special Binder Systems for the Use with Metal Powders for Highly Filled Filaments for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Kukla, C., Arbeiter, F. & Holzer, C., 14 Dec 2017, 33rd Annual Meeting of the Polymer Processing Society. Cancun, Mexico, Vol. 33. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    3D printing conditions determination for feedstock used in fused filament fabrication (FFF) of 17-4PH stainless steel parts

    Gonzalez-Gutierrez, J., Godec, D., Guran, R., Spörk, M., Kukla, C. & Holzer, C., 15 Nov 2017, In: Metalurgija : casopis Izdaje Tehnoloski Fakultet Sveucilista u Zagrebu, Odjeli u Sisku, Institut za Metalurgiju i Zeljezara Sisak = Metallurgy. 57.2018, 1-2, p. 117-120 4 p., 669.15:621.775:669.015:66.049.4:621.385.833=111.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Effect of the printing bed temperature on the adhesion of parts produced by fused filament fabrication

    Spörk, M., Gonzalez-Gutierrez, J., Sapkota, J., Schuschnigg, S. & Holzer, C., 8 Nov 2017, In: Plastics, rubber and composites. 47.2018, 1, p. 17-24 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Neues Werkzeug für die Messung der Entformungskräfte

    Lucyshyn, T. & Holzer, C., 1 Nov 2017, In: GAK : Gummi, Fasern, Kunststoffe. 11/2017, Jahrgang 70, p. 704-708 5 p.

    Research output: Contribution to journal › Article › Research

  16. Published

    The production of magnets by FFF - Fused Filament Fabrication

    Kukla, C., Gonzalez-Gutierrez, J., Burkhardt, C., Weber, O. & Holzer, C., 1 Oct 2017, Euro PM2017 Congress & Exhibition. Milan, Italy: European Powder Metallurgy Association, 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. E-pub ahead of print

    Influence of Melt Compounding on Blast Furnace Slag Filled PP Compounds: A Comparative Study

    Mostafa, A., Pacher, G., Lucyshyn, T., Holzer, C., Krischey, E., Flachberger, H., Fritz, B. & Laske, S., 31 Jul 2017, (E-pub ahead of print) In: International polymer processing. 32.2017, 4, p. 446-454 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. E-pub ahead of print

    Shrinkage and Warpage Optimization of Expanded-Perlite-Filled Polypropylene Composites in Extrusion-Based Additive Manufacturing

    Spörk, M., Sapkota, J., Weingrill, G., Fischinger, T., Arbeiter, F. & Holzer, C., 4 Jul 2017, (E-pub ahead of print) In: Macromolecular materials and engineering. 302.2017, 10, 13 p., 1700143.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Development of highly-filled polymer compounds for fused filament fabrication of ceramics and solvent debinding

    Cano Cano, S., Gonzalez-Gutierrez, J., Sapkota, J., Kukla, C. & Holzer, C., 27 Jun 2017.

    Research output: Contribution to conference › Presentation › Research

  20. E-pub ahead of print

    Parametric optimization of intra- and inter-layer strengths in parts produced by extrusion-based additive manufacturing of poly(lactic acid)

    Spörk, M., Arbeiter, F., Cajner, H., Sapkota, J. & Holzer, C., 26 Jun 2017, (E-pub ahead of print) In: Journal of Applied Polymer Science. 134.2017, 41, 15 p., 45401.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    SHAPING, DEBINDING AND SINTERING OF STEEL COMPONENTS VIA FUSED FILAMENT FABRICATION

    Gonzalez-Gutierrez, J., Godec, D., Kukla, C., Schlauf, T., Burkhardt, C. & Holzer, C., 8 Jun 2017, 16th International Scientific Conference on Production Engineering. Udiljak, T. (ed.). Zadar, Croatia, p. 99 104 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Fused Filament Fabrication (FFF) of PIM Feedstocks

    Kukla, C., Gonzalez-Gutierrez, J., Cano Cano, S., Hampel, S., Burkhardt, C., Moritz, T. & Holzer, C., 7 Jun 2017, ACTAS DEL VI CONGRESO NACIONAL DE PULVIMETALURGIA Y I CONGRESO IBEROAMERICANO DE PULVIMETALURGIA. Herranz, G., Ferrari, B. & Cabrera, J. M. (eds.). Ciudad Real, Spain, Vol. 6. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 12 3 4 5 6 7 8 9 ...19 Next
View graph of relations

Contact

Phone: 3500

Latest Research Output

View more (376)