Clemens Holzer

151 - 200 out of 376Page size: 50

Research output

  1. 2016
  2. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Holzer, C., Kukla, C., Duretek, I., Schuschnigg, S. & Gonzalez-Gutierrez, J., 28 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  3. Published

    Physical foam extrusion of polyolefin/cycloolefin copolymer blends

    Holzer, C., Walluch, M., Uray, A. & Langecker, G., 28 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  4. Published

    Effect of Compounding Method on Rheological, Thermal and Mechanical Behavior of Blast Furnace Slag Filled Polystyrene Compounds

    Mostafa, H., Pacher, G., Lucyshyn, T., Holzer, C., Flachberger, H., Krischey, E., Fritz, B. & Laske, S., 27 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    Nanocomposites and filled Polymers

    Holzer, C., 27 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  6. Published

    Simulation of the Influence of Thermal Properties of the Mould Steel on the Injection Moulding Process

    Holzer, C., Lucyshyn, T. & Des Enffans D'Avernas, L.-V., 27 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  7. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 25 Jul 2016, p. 299. 1 p.

    Research output: Contribution to conference › Abstract

  8. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 25 Jul 2016, 32nd International Conference of the POLYMER PROCESSING SOCIETY. Maazouz, A. (ed.). Lyon, France, Vol. 32. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Upcycling of POM for Catch Springs by Using the Rec2TecPart Process

    Katschnig, M. & Holzer, C., 25 Jul 2016, The Digital Book of Abstracts. 32nd International Conference of the POLYMER PROCESSING SOCIETY, p. 287 S16-623

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Models to Predict the Viscosity of Metal Injection Molding Feedstock Materials as Function of Their Formulation

    Gonzalez-Gutierrez, J., Duretek, I., Kukla, C., Poljšak, A., Bek, M., Emri, I. & Holzer, C., 28 May 2016, In: Metals : open access journal . 6.2016, 6, p. 129-146 17 p., 129.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Instrumented injection mold for the measurement of demolding energies of micro-structured parts

    Holzer, C., 20 May 2016.

    Research output: Contribution to conference › Presentation › Research

  12. Published

    Entwicklung von Polyolefinen für den Fused Filament Fabrication (FFF) Prozess

    Spörk, M., Schuschnigg, S. & Holzer, C., 14 May 2016.

    Research output: Contribution to conference › Poster › Research

  13. Published

    MaP "Additive Manufacturing" Lecture Series - Polymer-Implants

    Holzer, C., 26 Apr 2016.

    Research output: Contribution to conference › Presentation › Education

  14. Published

    Einfluss des relativen Druckwinkels auf die Oberflächentopologie von mittels FFF-Technik 3D-gedruckten Bauteilen

    Haar, B., Walluch, M., Anna, U., Katschnig, M. & Holzer, C., 14 Apr 2016, p. 191-192. 2 p.

    Research output: Contribution to conference › Poster › Research

  15. Published

    Entwicklung von Polyolefinen für den Fused Filament Fabrication Prozess

    Spörk, M., Schuschnigg, S. & Holzer, C., 14 Apr 2016, p. 203-204. 210 p.

    Research output: Contribution to conference › Abstract

  16. Published

    Fused Filament Fabrication for Metallic Parts

    Gonzalez-Gutierrez, J., Kukla, C., Schuschnigg, S., Duretek, I. & Holzer, C., 14 Apr 2016, 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung- vom Werkstoff zum Produkt. Pinter, G. & Pilz, G. (eds.). Leoben, Austria, Vol. 25. p. 187-188 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Haftungsvorhersage und Haftungsverbesserung im Fused Filament Fabrication (FFF) Prozess

    Schuschnigg, S., Huber, P., Holzer, C. & Spörk, M., 14 Apr 2016.

    Research output: Contribution to conference › Poster › Research

  18. Published

    Haftungsvorhersage und Haftungsverbesserung im Fused Filament Fabrication (FFF) Prozess

    Schuschnigg, S., Huber, P., Spörk, M. & Holzer, C., 14 Apr 2016, p. 201. 2 p.

    Research output: Contribution to conference › Abstract

  19. Published

    iPrint - Personalisierte Kranialimplantate mittels Fused Filament Fabrication

    Katschnig, M., Haar, B., Holzer, C., Ücal, M., Schäfer, U., von Campe, G. & Zefferer, U., 14 Apr 2016, 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt. Leoben, Vol. 06. p. 121-125 5 p. (Schriftenreihe Kunststofftechnik Leoben).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Neue additive Produktionstechnologien für die Holzindustrie

    Duretek, I., Müller, U., Veigel, S., Haider, A., Frybort, S. & Holzer, C., 14 Apr 2016, p. 185-186. 2 p.

    Research output: Contribution to conference › Abstract

  21. Published

    Neue additive Produktionstechnologien für die Holzindustrie

    Duretek, I., Müller, U., Veigel, S., Haider, A., Frybort, S. & Holzer, C., 14 Apr 2016. 1 p.

    Research output: Contribution to conference › Poster › Research

  22. Published

    Rec2TecPart - Ein neuer Prozess für Funktionsbauteile aus Sekundärrohstoffen

    Katschnig, M., Brendinger, C. & Holzer, C., 14 Apr 2016, p. 193-194. 2 p.

    Research output: Contribution to conference › Poster › Research

  23. Published

    Fused Filament Fabrication for Metallic Parts

    Gonzalez-Gutierrez, J., Kukla, C., Schuschnigg, S., Duretek, I. & Holzer, C., Apr 2016, p. 1.

    Research output: Contribution to conference › Poster › Research

  24. Published

    Biocompatibility of FDM printed PEEK is comparable to cranial bone properties; FDM printed PEEK is thereby a suitable material for cranial implants

    Schäfer, U., von Campe, G., Ücal, M., Tax, A., Katschnig, M. & Holzer, C., 30 Mar 2016, Front. Bioeng. Biotechnol. Conference Abstract: 10th World Biomaterials Congress.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Grundlage für eine erfolgreiche Verarbeitung - genaue Materialkenntisse

    Holzer, C., 2 Mar 2016.

    Research output: Contribution to conference › Presentation › Research

  26. Published

    Wetting behavior of polymer melts on coated and uncoated tool steel surfaces

    Zitzenbacher, G., Huang, Z., Längauer, M., Forsich, C. & Holzer, C., 16 Feb 2016, In: Journal of Applied Polymer Science. 133.2016, 21, 10 p., 43469.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Coupled Orientation and Stretching of Chains in Mesoscale Models of Polydisperse Linear Polymers in Startup of Steady Shear Flow Simulations

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016, In: Macromolecular Theory and Simulations.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Dissipative Particle Dynamics Models of Orientation of Weakly-Interacting Anisometric Silicate Particles in Polymer Melts under Shear Flow: Comparison with the Standard Orientation Models

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016, In: Macromolecular Theory and Simulations.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Dissipative particle dynamics simulations of orientation of layered silicate particles embedded in polymer melts under shear flows

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016, In: AIP Conference Proceedings. 050010.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Filling Behavior of Wood Plastic Composites

    Duretek, I., Lucyshyn, T. & Holzer, C., 2016, In: Journal of Civil Engineering and Architecture. 10, p. 1236-1243 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Optimization of twin screw extrusion using CFD for polymer/nanoclay composites

    Schuschnigg, S., Battisti, M., Winkler-Ebner, J., Friesenbichler, W. & Holzer, C., 2016, In: AIP Conference Proceedings.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Structure of Polypropylene Macromolecules in the Vicinity of Fe2O3 Surface

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016.

    Research output: Contribution to conference › Poster › Research

  33. Published

    Structure of Polypropylene Macromolecules in the Vicinity of Fe2O3 Surface

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016, p. 189. 190 p.

    Research output: Contribution to conference › Abstract

  34. 2015
  35. Published

    Enhancing the temperature stability of PLA by compounding strategies

    Laske, S., Ziegler, W., Kainer, M., Wuerfel, J. & Holzer, C., 1 Dec 2015, In: Polymer engineering and science. 55, 12, p. 2849-2858 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Study of rheological behaviour of stainless steel feedstock taking into account the thermal effects

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J., Gooneie, A. & Holzer, C., 30 Nov 2015, IBEREO’15 IBERIAN RHEOLOGY CONFERENCE. Rasteiro, M. G. (ed.). Coimbra, Portugal: Universidad Nacional de Colombia, p. 50-53 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Filling behaviour of wood plastic composites

    Duretek, I., Lucyshyn, T. & Holzer, C., 7 Oct 2015, p. 47. 1 p.

    Research output: Contribution to conference › Abstract

  38. Published

    Orientation of Anisometric Layered Silicate Particles in Uncompatibilized and Compatibilized Polymer Melts under Shear Flow: A Dissipative Particle Dynamics Study

    Gooneie, A., Schuschnigg, S. & Holzer, C., 29 Sept 2015, In: Macromolecular Theory and Simulations. 25.2016, 1, p. 85-98 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Influence of the relative printing angle on surface topography of 3d printed parts manufactured by fff technique

    Haar, B., Walluch, M., Katschnig, M. & Holzer, C., 23 Sept 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  40. Published

    Optimization of Twin Screw Extrusion using CFD for Polymer/Nanoclay Composites: Polymer Processing Society Regional Conference Graz 2015 Book of Abstracts

    Schuschnigg, S., Battisti, M., Winkler-Ebner, J., Friesenbichler, W. & Holzer, C., 21 Sept 2015, p. 182.

    Research output: Contribution to conference › Abstract

  41. Published

    Rheological Behaviour of Bronze Feedstocks at Low Shear Rates

    Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 14 Sept 2015, Euro PM2015 Congress Proceedings. Reims, France: European Powder Metallurgy Association, 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Weld line improvement of short fiber reinforced thermoplastics with a movable flow obstacle

    Janko, M., Spiegl, B., Kaufmann, A., Lucyshyn, T. & Holzer, C., 15 Jun 2015, In: Journal of Applied Polymer Science. 132, 23, p. 1-12 12 p., 42025.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Besondere Aspekte bei der Herstellung mikrostrukturierter Spritzgussteile

    Lucyshyn, T., Struklec, T., Burgsteiner, M., Graninger, G. & Holzer, C., 2015, Schriftenreihe Kunststofftechnik Leoben: 24. Leobener Kunststoff-Kolloquium. Leoben, Vol. 05. p. 198-207 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Dissipative Particle Dynamics Simulations of Orientation of Layered Silicate Particles Embedded in Polymer Melts under Shear Flows

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2015, Abstract from PPS2015 - Polymer Processing Society Conference 2015, Graz, Austria. p. 144

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Effect of Chain Length on the Rheology of Dissipative Particle Dynamics Models of Polymer Fluids

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2015, Danube Vltava Sava Polymer Meeting - DVSPM 2015, Proceedings of a Conference on Polymer Science.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Grafting of vinyl phosphoric acid monomers for the crosslinking of polypropylene

    Mattausch, H., Spörk, M., Rieß, G. & Holzer, C., 2015.

    Research output: Contribution to conference › Poster › Research

  47. Published

    Grafting of vinyl phosphoric acid monomers for the crosslinking of polypropylene

    Mattausch, H., Spörk, M., Rieß, G. & Holzer, C., 2015, PPS Graz - Konferenzbeitrag.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Kinetics and mechanism of the biodegradation of PLA/clay nanocomposites during thermophilic phase of composting process

    Stloukal, P., Pekarova, S., Kalendova, A., Mattausch, H., Laske, S., Holzer, C., Chitu, L., Bodner, S., Maier, G., Slouf, M. & Koutny, M., 2015, In: Waste management. 42, p. 31-40 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Multiscale Simulation of Polymer Nanocomposites in Processing: Challenges and Outlooks

    Gooneie, A., Mattausch, H., Witschnigg, A., Schuschnigg, S. & Holzer, C., 2015, Material Forming ESAFORM 2015: Selected, peer reviewed papers from the 18th International ESAFORM Conference on Material Forming (ESAFORM 2015), April 15-17, 2015, Graz, Austria.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Multiscale Simulation of Polymer Nanocomposites in Processing: Challenges and Outlooks

    Gooneie, A., Mattausch, H., Witschnigg, A., Schuschnigg, S. & Holzer, C., 2015, Key engineering materials. Vol. 651-653. p. 533-538 6 p. (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  51. Published

    Numerical simulations of the flow of wood polypropylene composites with wall slipping in a profile die: The significance of material data

    Gooneie, A., Schuschnigg, S., Duretek, I. & Holzer, C., 2015, In: AIP Conference Proceedings. 1664, 1

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Research in manufacturing of micro-structured injection molded polymer parts

    Lucyshyn, T., Struklec, T., Burgsteiner, M., Graninger, G. & Holzer, C., 2015, AIP Conference Proceedings. Vol. 1695. p. 1-9 9 p. 020014

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 6 7 8 Next
View graph of relations

Contact

Phone: 3500

Latest Research Output

View more (376)