Christoph Guster

(Former)

1 - 50 out of 81Page size: 50

Research output

  1. 2018
  2. Published

    Experimental determination of highly dynamic forces during wood trunk comminution with a drum chipper

    Pichler, P., Leitner, M., Grun, F. & Guster, C., 11 Jan 2018, In: Journal of Agricultural Engineering. p. 1-16 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Evaluation of wood material models for the numerical assessment of cutting forces in chipping processes

    Pichler, P., Leitner, M., Grün, F. & Guster, C., Jan 2018, In: Wood Science and Technology. 52, 1, p. 281-294 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2017
  5. Published

    Wear and fatigue resistance of mild steel components reinforced by arc welded hard layers

    Leitner, M., Pichler, P., Steinwender, F. & Guster, C., 2017, In: Surface & coatings technology. 330.2017, 1 December, p. 140-148 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. 2016
  7. Published

    Experimental evaluation of cutting forces for chipping process and developement of wood material model

    Pichler, P., Leitner, M., Grün, F. & Guster, C., 2016, CD-ROM Proceedings of the World Conference on Timber Engineering: WCTE 2016. Eberhardsteiner, J., Winter, W., Fadai, A. & Pöll, M. (eds.). 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Experimental evaluation of cutting forces for chipping process and development of wood material model

    Pichler, P., Leitner, M., Grün, F. & Guster, C., 2016, WCTE 2016 - World Conference on Timber Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. 2015
  10. Published

    Material fatigue models and design methodology for short fibre reinforced polymers based on damage accumulation hypothesis

    Pinter, G., Mösenbacher, A., Maier, J., Primetzhofer, A. & Guster, C., 31 Mar 2015, Proceedings 16th International Conference on Deformation Yield and Fracture of Polymers.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. 2014
  12. Published

    Bewertung des Einflusses von Defekten auf die Schwingfestigkeit von Gusseisen mit Kugelgraphit

    Kainzinger, P., Guster, C., Severing, M. & Ballmes, H., 2014, DVM-Bericht 1681. p. 19-27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Charakterisierung der Schwingfestigkeit einer Al-Thixogusslegierung

    Mösenbacher, A., Tan, W. & Guster, C., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    Fundamental Influences on Quasistatic and Cyclic Material Behavior of Short Glass Fiber Reinforced Polyamide Illustrated on Microscopic Scale

    Brunbauer, J., Pinter, G., Mösenbacher, A. & Guster, C., 2014, In: Journal of Applied Polymer Science. 131, p. 1-14

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Modelling and Validation of Fatigue Life Calculation Method for Short Fibre Reinforced Injection Moulded Parts

    Mösenbacher, A., Pichler, P., Guster, C., Pinter, G. & Maier, J., 2014, Proceedings of 16th Conference on Composite Materials. Sevilla

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. 2013
  17. Published

    A testing apparatus for SEM in-situ fatigue testing of small scale specimens and a derived application

    Reiser, J., Maier, B., Guster, C., Gänser, H.-P. & Pippan, R., 2013,

    Proceedings of the ASME 2013 Pressure Vessels & Piping Division Conference

    .     p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Bewertung des Einflusses von Defekten auf die Schwingfestigkeit von Gusseisen mit Kugelgraphit

    Kainzinger, P., Guster, C., Severing, M. & Ballmes, H., 2013, DVM-Bericht 140. p. 209-218

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Bruchmechanische Charakterisierung der Wärmeeinflusszone einer Schweißnaht eines niederfesten Feinkornbaustahls

    Maier, B. & Guster, C., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Bruchmechanische Charakterisierung der WEZ einer Schweißnaht eines hochfesten Feinkornbaustahls

    Maier, B. & Guster, C., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Different microstructures in the HAZ of double submerged arc welded pipelines and how they influence the fatigue crack growth

    Maier, B., Guster, C., Tichy, R. & Ecker, W., 2013,

    Proceedings of the ASME 2013 Pressure Vessels & Piping Conference (PVP2013)

    .     p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Fatigue Life Calculation of Short Fibre Reinforced Thermoplastic Parts

    Mösenbacher, A., Pichler, P., Brunbauer, J., Guster, C. & Pinter, G., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    Influence of different microstructures of the welding zone on the fatigue crack growth behaviour of HSLA steels

    Maier, B., Guster, C., Tichy, R. & Ecker, W., 2013, 13th International Conference on Fracture - Abstract Book. p. 211-211

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Influence of micro-shrinkage on the fatigue behavior of ductile iron

    Kainzinger, P., Guster, C., Severing, M. & Wolf, A., 2013, 13th International Conference on Fracture. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Lebensdauerberechnung an Strukturbauteilen aus kurzfaserverstärkten Thermoplasten

    Mösenbacher, A., Pichler, P., Guster, C., Brunbauer, J. & Pinter, G., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    Lebensdauerberechnung an Strukturbauteilen aus kurzfaserverstärkten Thermoplasten

    Mösenbacher, A., Pichler, P., Guster, C., Brunbauer, J. & Pinter, G., 2013, Die Betriebsfestigkeit als eine Schlüsselfunktion der Zukunft. p. 301-316

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Mikrostrukturelle Einflüsse auf das HCF-Ermüdungsverhalten von Al-Kokillenguss und Einbindung der Gießsimulation in die betriebsfeste Bauteilauslegung

    Redik, S., Guster, C., Ehart, R. & Schächtl, R., 2013, Potenziale für die nächste Generation von Fahrzeugantrieben. p. 199-216

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Simulating the Fatigue Life of Fiber-Reinforced Injection Moldings

    Guster, C., Friesenbichler, W., Gröger, T., Mösenbacher, A. & Brunbauer, J., 2013, In: Kunststoffe <München> / Kunststoffe international. p. 92-94

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Simulation der Lebensdauer faserverstärkter Spritzgussteile

    Guster, C., Friesenbichler, W., Gröger, T., Mösenbacher, A. & Brunbauer, J., 2013, In: Kunststoffe. p. 158-161

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Vergleichende HCF- und TMF-Untersuchungen an einem Al-Si-Cu Gusswerkstoff

    Huter, P. & Guster, C., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    Vergleich von zwei Feinkornbaustählen mittels bruchmechanischer und statischer Kennwerte

    Maier, B. & Guster, C., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. 2012
  33. Published

    2. Zwischenbericht (FFG-Bridge): FestOptAlGuss - Entwicklung von Materialmodellen für die festigkeitstechnische Optimierung von hochbelasteten Aluminium-Gusskomponenten

    Guster, C. & Redik, S., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Abschätzung der lokalen Wöhlerlinie von Gusseien mit Kugelgraphit aus der Gießsimulation

    Kainzinger, P., Guster, C., Severing, M. & Wolf, A., 2012, DVM-Bericht 139, 39. Tagung des DVM-Arbeitskreises Betriebsfestigkeit. p. 379-388

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Abschätzung der lokalen Wöhlerlinie von Gusseisen mit Kugelgraphit aus der Gießsimulation

    Kainzinger, P., Guster, C., Severing, M. & Wolf, A., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. Published

    A new SEM in-situ fatigue testing apparatus and its application for evaluation of fatigue damage at higher load cycles

    Reiser, J., Maier, B., Gänser, H.-P., Guster, C. & Pippan, R., 2012, Proceedings of ECF 19. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Austempered Ductil Iron - Improvement of Fatigue Behaviour and Application of Casting Simulation

    Wohlfahrt, M., Kainzinger, P. & Guster, C., 2012, 3rd Fatigue Symposium Leoben. p. 45-57

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Berechnung von Thermospannungen in einem geklebten Keramik-GFK-Verbund nach der Aushärtung

    Mösenbacher, A., Maderbacher, H. & Guster, C., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  39. Published

    Betriebsfeste Auslegung im Leichtbau

    Eichlseder, W. & Guster, C., 2012, Energieeffiziente Mobilität: Chancen der Werkstoff- und Prozesstechnologie. p. 185-195

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Comparison of Fatigue Behavior of Different Materials under Rolling Contact Fatigue

    Magritzer, M., Wohlfahrt, M., Guster, C., Godor, I. & Grün, F., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    Endbericht (FFG): Austempered Ductile Iron - Festigkeitssteigerung unter komplexer Betriebsbeanspruchung

    Wohlfahrt, M. & Guster, C., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Endbericht FFG-Bridge: Kunststoff-Funktionsbauteile

    Guster, C. & Mösenbacher, A., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Estimating the Local Fatigue Strength of EN-GJS-400

    Kainzinger, P. & Guster, C., 2012, 3rd Fatigue Symposium Leoben Conference Transcript. p. 26-33

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Fatigue behaviour of a short glass fibre reinforced polyamide: Effect of notches and temperature

    Mösenbacher, A. & Guster, C., 2012, 3rd Fatigue Symposium Leoben Lightweight Design. p. 152-160

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Influence of Multiaxial Fatigue Loadings on Fatigue Behaviour of Austempered Ductile Iron

    Zivkovic, I., Wohlfahrt, M. & Guster, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  46. Published

    Integration of material microstructure relations into fatigue design of aluminum-die-cast engine components

    Redik, S. & Guster, C., 2012, Aluminium – material for the future. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Investigation of Concepts Describing the Influence of Stress Concentration on the Fatigue Behaviour of Short Glass Fibre Reinforced Polyamide

    Eichlseder, W., Mösenbacher, A., Guster, C. & Pinter, G., 2012, Proceedings of the 15th European Conference on Composite Materials. Venice

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    NEW APPROACH FOR TESTING AND MODELLING OF FATIGUE BEHAVIOUR

    Reiser, J., Maier, B., Gänser, H.-P., Guster, C. & Pippan, R., 2012, Proceedings of World Congress on Computational Mechanics. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Wear and Strength Investigation of Shredding Tools with Different Designed Wearing Surfaces

    Feyerer, C., Mösenbacher, A. & Guster, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Zum Einfluss überlagerter Mittelspannung und Temperatur auf das zyklische Materialverhalten von Gusseisen mit Kugelgraphit

    Kainzinger, P., Guster, C., Wolf, A. & Severing, M., 2012, In: Gießerei-Rundschau. p. 288-292

    Research output: Contribution to journal › Article › Research › peer-review

  51. 2011
  52. Published

    1. Zwischenbericht (FFG): FestOptAlGuss - Entwicklung von Materialmodellen für die festigkeitstechnische Optimierung von hochbelasteten Aluminium-Gusskomponenten

    Guster, C. & Redik, S., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  53. Published

    2. Zwischenbericht (FFG): Austempered Ductile Iron - Festigkeitssteigerung unter komplexer Betriebsbeanspruchung

    Wohlfahrt, M. & Guster, C., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  54. Published

    2. Zwischenbericht FFG-Bridge: Kunststoff-Funktionsbauteile

    Guster, C. & Mösenbacher, A., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  55. Published

    3. Zwischenbericht (FFG): Austempered Ductile Iron - Festigkeitssteigerung unter komplexer Betriebsbeanspruchung

    Wohlfahrt, M. & Guster, C., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  56. Published

    3. Zwischenbericht FFG-Bridge: Kunststoff-Funktionsbauteile

    Guster, C. & Mösenbacher, A., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  57. Published

    A new testing rig for SEM in-situ fatigue testing

    Reiser, J., Guster, C., Motz, C. & Pippan, R., 2011, Proceedings of Euromat 2011. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Betriebsfeste Dimensionierung von faserverstärkten Kunststoffkomponenten – eine durchgängige Simulationskette von der Spritzgusssimulation zur Schädigungsrechnung

    Guster, C., Mösenbacher, A. & Pinter, G., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1 2 Next
View graph of relations

Latest Research Output

View more (81)