Christina Hofer

(Former)

1 - 20 out of 42Page size: 20

Research output

  1. 2022
  2. Published

    Ab initio study of alloying Impact on the stability of cementite in transformation-Induced plasticity-assisted advanced steels

    Sakic, A., Hofer, C., Schnitzer, R. & Holec, D., 18 Sept 2022, In: Advanced engineering materials. 24.2022, 11, 10 p., 2200532.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Cracking mechanism in a laser powder bed fused cold-work tool steel: The role of residual stresses, microstructure and local elemental concentrations

    Platl, J., Bodner, S. C., Hofer, C., Landefeld, A., Leitner, H., Turk, C., Nielsen, M.-A., Demir, A. G., Previtali, B., Keckes, J. & Schnitzer, R., 15 Feb 2022, In: Acta materialia. 225.2022, 15 February, 16 p., 117570.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Influence of B content on microstructure, phase composition and mechanical properties of CVD Ti(B,N) coatings

    Tkadletz, M., Schalk, N., Lechner, A., Hatzenbichler, L., Holec, D., Hofer, C., Deluca, M., Sartory, B., Lyapin, A., Julin, J. & Czettl, C., 10 Jan 2022, In: Materialia. 21.2022, March, 9 p., 101323.

    Research output: Contribution to journal › Article › Research › peer-review

  5. 2021
  6. Published

    Bending behavior of zinc-coated hot stamping steels

    Hofer, C., Stadler, M., Kurz, T., Maier-Kiener, V., Mayerhofer, A., Hebesberger, T. & Schnitzer, R., Oct 2021, In: Steel research international. 92, 10, p. 1-9 2100149.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Microstructure and Local Mechanical Properties of the Heat-Affected Zone of a Resistance Spot Welded Medium-Mn Steel

    Stadler, M., Schnitzer, R., Gruber, M., Steineder, K. & Hofer, C., 17 Jun 2021, In: Materials. 14.2021, 12, p. 1-13 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Microstructure and mechanical properties of partially ferritic Q&P steels

    Kickinger, C., Suppan, C., Hebesberger, T., Schnitzer, R. & Hofer, C., 20 May 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 815.2021, 20 May, 11 p., 141296.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Atom Probe Tomography of the Oxide Layer of an Austenitic Stainless CrMnN-Steel

    Monschein, S., Schnitzer, R., Fluch, R., Turk, C. & Hofer, C., 14 May 2021, In: Practical metallography = Praktische Metallographie. 58.2021, 5, p. 264-281 18 p.

    Research output: Contribution to journal › Article › Research

  10. Published

    Nanocluster evolution and mechanical properties of ion irradiated T91 ferritic-martensitic steel

    Davis, T. P., Auger, M. A., Hofer, C., Bagot, P., Moody, M. P. & Armstrong, D. E. J., May 2021, In: Journal of nuclear materials. 548.2021, May, 10 p., 152842.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Improving the mechanical performance of a resistance spot welded 1200 MPa TBF steel

    Stadler, M., Schnitzer, R., Gruber, M. & Hofer, C., 1 Apr 2021, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 112.2021, 4, p. 262-270 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Influence of partitioning parameters on the mechanical stability of austenite in a Q&P steel: A comparative in-situ study

    Ebner, S., Schnitzer, R., Maawad, E., Suppan, C. & Hofer, C., Mar 2021, In: Materialia. 15.2021, March, 10 p., 101033.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Influence of the cooling time on the microstructural evolution and mechanical performance of a double pulse resistance spot welded Medium-Mn steel

    Stadler, M., Schnitzer, R., Gruber, M., Steineder, K. & Hofer, C., 5 Feb 2021, In: Metals : open access journal . 11.2021, 2, p. 1-11 11 p., 270.

    Research output: Contribution to journal › Article › Research › peer-review

  14. 2020
  15. E-pub ahead of print

    The role of Ti and TiC nanoprecipitates in radiation resistant austenitic steel: A nanoscale study

    Cautaerts, N., Deville, R., Stergar, E., Pakarinen, J., Verwerft, M., Yang, Y., Hofer, C., Schnitzer, R., Lamm, S., Felfer, P. & Schryvers, D., 10 Jul 2020, (E-pub ahead of print) In: Acta materialia. 197.2020, 15 September, p. 184-197 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. E-pub ahead of print

    Characterization of carbides in Q&P steels using a combination of high-resolution methods

    Ebner, S., Schnitzer, R., Suppan, C., Stark, A., Liu, H. & Hofer, C., 2 Mar 2020, (E-pub ahead of print) In: Materials characterization. 163.2020, May, 11 p., 110242.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Microstructural characterization of a double pulse resistance spot welded 1200 Mpa TBF steel

    Stadler, M., Gruber, M., Schnitzer, R. & Hofer, C., 1 Feb 2020, In: Welding in the world. 64.2020, 2, p. 335-343 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. 2019
  19. Published

    Formation of "carbide-free zones" resulting from the interplay of C redistribution and carbide precipitation during bainitic transformation

    Klein, T., Hofer, C., Lukas, M., Wojcik, T., Schnitzer, R., Galler, M. & Ressel, G., 23 Jun 2019, In: Materialia. 7.2019, September, 100380.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Austenite decomposition and carbon partitioning during quenching and partitioning heat treatments studied via in-situ X-ray diffraction

    Ebner, S., Suppan, C., Stark, A., Schnitzer, R. & Hofer, C., 2019, In: Materials and Design. 178.2019, September, 107862.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Thermal stability of nanolamellar fcc-Ti1-xAlxN grown by chemical vapor deposition

    Tkadletz, M., Hofer, C., Wüstefeld, C., Schalk, N., Motylenko, M., Rafaja, D., Holzschuh, H., Bürgin, W., Sartory, B., Mitterer, C. & Czettl, C., 2019, In: Acta Materialia. 174.2019, August, p. 195-205 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. 2018
  23. E-pub ahead of print

    Microstructure and mechanical properties of a low C steel subjected to bainitic of quenching and partitioning heat treatments

    Ebner, S., Suppan, H., Schnitzer, R. & Hofer, C., 10 Aug 2018, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    High-resolution characterization of the martensite-austenite constituent in a carbide-free bainitic steel

    Hofer, C., Bliznuk, V., Verdiere, A., Petrov, R., Winkelhofer, F., Clemens, H. & Primig, S., 10 Jul 2018, In: Materials characterization. 144.2018, October, p. 182-190 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Correlation of heat treatment parameters, microstructure and mechanical properties of 3rd generation AHSS

    Ebner, S., Suppan, C., Schnitzer, R. & Hofer, C., 2018.

    Research output: Contribution to conference › Poster › Research

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (42)