Bruno Buchmayr

(Former)

101 - 150 out of 255Page size: 50

Research output

  1. 2013
  2. Published

    Systematische Prozessbetrachtung von Flow Forming

    Kuss, M. & Buchmayr, B., 2013, Systematische Prozessbetrachtung von Flow Forming. p. 131-136

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Triaxial Residual Stresses in Thermomechanically Rolled Seamless Tubes characterized by High-Energy Synchrotron X-Ray diffraction

    Winter, G., Stefenelli, M., Klarner, J., Staron, P., Fischer, T., Keckes, J. & Buchmayr, B., 2013,

    Proceedings of the2013 ASME Pressure Vessels & Piping Conference

    .     p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    XXXII. Verformungskundliches Kolloquium 2013

    Buchmayr, B. (Editor) & Harrer, O.-K. (Editor), 2013, Leoben, Österreich: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  5. 2012
  6. Published

    3D Finite Element Simulation of Cold Pilgering over the Whole Productive Time

    Strickner, G., Ragger, K., Hatzenbichler, T. & Buchmayr, B., 2012, Proceedings of the14th International Conference on Metal Forming 2012. p. 71-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    5.Analyse des Axial-Radial-Umformens mittels Finite-Elemente-Methode

    Kuss, M., Wallner, S., Harrer, O.-K. & Buchmayr, B., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. p. 181-186

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    A new Concept to Design Drawing Tools with Respect to Central Demage

    Kaiser, R., Hatzenbichler, T. & Buchmayr, B., 2012, Proceedings of the14th International Conference on Metal Forming 2012. p. 1387-1390

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Characterisierung des Umform- und Umwandlungsverhaltens des Dualphasenstrahles 10MnSi7 für die Massivumformung

    Buchmayr, B. & Schiller, W., 2012, MEFORM 2012. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Deviation of the results obtained from different commercial finite element solvers due to friction formulation

    Hatzenbichler, T., Harrer, O.-K., Wallner, S., Planitzer, F., Kuss, M., Pschera, R. & Buchmayr, B., 2012, In: Tribology International. 49, p. 75-79

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    FEM-Analyse des Axial-Radial-Umformens als Verfahrenserweiterung des Radialschmiedens

    Kuss, M., Wallner, S., Harrer, O.-K. & Buchmayr, B., 2012, XXXI. Verformungskundliches Kolloquium. p. 29-33

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    FEM-Analyse des Axial-Radial-Umformens als Verfahrenserweiterung des Radialschmiedens

    Kuss, M., Wallner, S. & Buchmayr, B., 2012, Simulation in der Umformtechnik. p. 228-245

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Lightweight design by radial forged gear box components

    Hofer, F., Kuss, M., Wallner, S., Buchmayr, B. & Harrer, O.-K., 2012, Getriebe in Fahrzeugen. p. 309-319

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Maßnahmen zur Reparatur und Lebensdauererhöhung von Schmiedewerkzeugen

    Yilkiran, T., Behrens, B.-A. & Buchmayr, B., 2012, In: Schmiede-Journal. 2012, März, p. 52-57

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Optimierte Herstellungs- und Wärmebehandlungsparameter walzplattierter Magnesium(AZ31)-Aluminium(1050)-Verbundwerkstoffe

    Schlögl, C. M., Harrer, O.-K. & Buchmayr, B., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 313-318

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Prediction of Residual Stresses during the Heat Treatment of large Forgings

    Taschauer, M., Pschera, R., Wieser, V., Schramhauser, S. & Buchmayr, B., 2012, ICRF 2012 Proceedings. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Simulation of the roller straightening process with respect to residual stresses and the curvature trend

    Kaiser, R., Hatzenbichler, T., Buchmayr, B. & Antretter, T., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    The Characterization of the wear behaviour of different die materials and coatings for forging dies using a rotational tribometer

    Mazlum, E. & Buchmayr, B., 2012, Proceedings of the 9th International Tooling Conference. p. 417-424

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Thermo-Mechanical Behaviour of Dual-Phase Steels in Various Structural Morphologies: Experiments and Modelling

    Buchmayr, B. & Antretter, T., 2012, THERMEC 2011 : International Conference on Processing and Fabrication of Advanced Materials ; processing, fabrication, properties, applications ; August 1 - 5, 2011, Quebec City, Canada . p. 2072-2077 (Materials science forum; vol. 706-709).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    XXXI. Verformungskundliches Kolloquium

    Buchmayr, B. (Editor) & Harrer, O.-K. (Editor), 2012, Leoben, Österreich: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  21. 2011
  22. Published

    A simulation strategy to compute long-term die heating during radial forging

    Hatzenbichler, T., Wallner, S., Buchmayr, B., Prevedel, P. & Caliskanoglu, D., 2011, In: Steel grips : journal of steel and related materials. p. 57-61

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Comutational Modeling of Laser Treatment of Plates for Increased Buckling Loads and Natural Frequencies

    Bilik, C., Rammerstorfer, F. G., Figala, G. & Buchmayr, B., 2011, In: Proceedings of the Institution of Mechanical Engineers / C (Part C, Journal of mechanical engineering science). 225, p. 2385-2398

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Erstellung eines numerischen Simulationsmodells am Beispiel des Walzens von Rippenplatten UIC60-0

    Harrer, O.-K., Buchmayr, B., Hatzenbichler, T. & Riedl, A., 2011, In: Kalibreur. 72, p. 69-71

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Herstellung und Umformbarkeit walzplattierter Magnesium(AZ31)-Aluminium(1050)-Verbunde

    Schlögl, C., Planitzer, C., Harrer, O.-K. & Buchmayr, B., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. 156, p. 136-141

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Metallurgical and Mechanical Analyses of Dissimilar Friction Weldments of Ferrous and Non-Ferrous Metals for Lightweight Components

    Figala, G., Taschauer, M., Wallner, S. & Buchmayr, B., 2011, Esaform Conference 2011. p. 1272-1277

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Optimierung des Herstellprozesses der neuen LaserSealed™ Fülldrähte von Böhler Schweißtechnik

    Böck, B., Buchmayr, B., Sitte, W., Egger, A. & Posch, G., 2011, XXX. Verformungskundliches Kolloquium. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Physical simulation of the hot direct rolling of steel

    Gelder, S., Buchmayr, B., Linzer, B. & Hohenbichler, G., 2011, In: Steel research international. p. 1213-1219

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Practiacal Inverse Analysis in Metal Forming

    Pschera, R. & Buchmayr, B., 2011, Computer Methods in Materials Science. p. 436-441

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Reproduce diameter reduction process of a powder filled tube in finite element analysis

    Böck, B., Buchmayr, B., Wallner, S. & Posch, G., 2011, Computational Plasticity XI Fundamentals and Applications. p. 1134-1141

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    ToughTubes - extrem feinkörnige nahtlose Stahlrohre

    Klarner, J., Buchmayr, B. & Rainer, W., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. p. 168-174

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Workshop Schmiedewerkzeuge

    Buchmayr, B. (Editor), 2011, Leoben: Montanuniversität Leoben, Lehrstuhl für Umformtechnik.

    Research output: Book/Report › Anthology › Research

  33. Published

    XXX. Verformungskundliches Kolloquium

    Buchmayr, B. (Editor) & Harrer, O.-K. (Editor), 2011, Leoben, Österreich: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  34. 2010
  35. Published

    Analyse und Diskussion verschiedener Verfahren der Eigenspannungsmessung anhand von laserbehandelten dünnwandigen Blechen

    Forstner, K., Figala, G., Hatzenbichler, T. & Buchmayr, B., 2010, XXIX. Verformungskundliches Kolloquium. p. 85-90

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Effect of different contact formulations used in commercial FEM software packages on the results of hot forging simulations

    Hatzenbichler, T., Buchmayr, B., Harrer, O.-K. & Planitzer, F., 2010, In: Metallurgia Italiana. 11-12, p. 11-15

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    FEM-Simulation of High-Speed Corrugation Process with Abaqus/Explicit

    Hatzenbichler, T., Buchmayr, B. & Weiss, S., 2010, Metal forming 2010 : proceedings of the 13th International Conference on Metal Forming, September 19 - 22, 2010, Hotel Nikko Toyohashi, Toyohashi, Japan . Mori, K.-I. (ed.). p. 1014-1017

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Finite element method simulation of internal defects in billet-to-billet extrusion

    Hatzenbichler, T. & Buchmayr, B., 2010, In: Proceedings of the Institution of Mechanical Engineers / B (Part B, Journal of engineering manufacture). p. 1029-1042

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Improvement of buckling resistance of thin sheets by local laser treatment

    Figala, G. & Buchmayr, B., 2010, In: International journal of material forming. 3, p. 829-832

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Improvement of buckling resistance of thin sheets by local laser treatment

    Figala, G. & Buchmayr, B., 2010, 13th International ESAFORM Conference on Material Forming. AIP Press

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Lokale fertigungstechnische Verstärkungskonzepte zur Erhöhung der Materialeffizienz

    Buchmayr, B., Figala, G. & Wunsch, L., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. 155, p. 307-312

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Manufacturing of precision forgings by radial forging

    Wallner, S., Harrer, O.-K. & Buchmayr, B., 2010, AMPT 2010 "Advances in Materials and Processing Technologies". p. 315-320

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Material flow of a warm formed profile considering the pre-treatment of the material

    Harrer, O.-K., Buchmayr, B. & Wallner, S., 2010, In: International journal of material forming. p. 327-330

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Metallurgische Einflüsse auf die Umformbarkeit von Stählen

    Buchmayr, B. & Bernhard, C., 2010, XXIX. Verformungskundliches Kolloquium. p. 5-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    New developments in the field of continuous production of corrugated metal hoses

    Weiss, S., Hatzenbichler, T. & Buchmayr, B., 2010, In: Tube & pipe technology. 23, 4, p. 106-110

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Simulation des Walzens von Rippenplatten UIC60-0

    Harrer, O.-K., Buchmayr, B. & Riedl, A., 2010, MEFORM 2010 80 Jahre Walzwerks- und Werkstofftechnologie in Freiberg. p. 226-237

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Simulation of cold forging under consideration of residual stresses induced by preceding drawing

    Hatzenbichler, T., Buchmayr, B. & Walzl, A., 2010, AMPT 2010 "Advances in Materials and Processing Technologies". p. 321-326

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Simulation of rolling of check rail support plates

    Harrer, O.-K., Riedl, A. & Buchmayr, B., 2010, In: Steel grips : journal of steel and related materials. 8, p. 34-37

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Untersuchungen zum Verbundgießen warmfester Legierungen

    Buchmayr, B. & Weligoschek, T., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. 155, p. 318-324

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    XXIX. Verformungskundliches Kolloquium

    Buchmayr, B. (Editor) & Harrer, O.-K. (Editor), 2010, Leoben, Österreich: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  51. 2009
  52. Published

    Aktuelle Entwicklungen am Lehrstuhl für Umformtechnik

    Buchmayr, B., 2009, Aktuelle Entwicklungen am Lehrstuhl für Umformtechnik. p. 187-193

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Anwendung der thermomechanischen Behandlung beim Walzen von nahtlosen Stahlrohren

    Klarner, J.K.-H. & Buchmayr, B., 2009, Anwendung der thermomechanischen Behandlung beim Walzen von nahtlosen Stahlrohren. p. 191-204

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Charakterisierung eines Radialschmiedeprozesses zum Oberflächenverdichten von P/M Zahnrädern mittels FEM

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2009, Charakterisierung eines Radialschmiedeprozesses zum Oberflächenverdichten von P/M Zahnrädern mittels FEM. p. 9-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Determination of the real contact area for numerical simulation

    Buchner, B., Buchner, M. & Buchmayr, B., 2009, In: Tribology International. 42, p. 897-901

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 Next
View graph of relations

Latest Research Output

View more (255)